催化还原褪色光度法测定痕量铜的研究

本文在少量氯化钠存在下的磷酸－磷酸二氢钾缓冲溶液（ｐＨ＝２．７）中，以铜（Ⅱ）催化次磷酸钠还原罗丹明Ｂ褪色为指示反应，建立了痕量铜的动力学光度分析新方法，在沸水浴中加热反应１０ｍｉｎ，测定的线性范围在０～０．４０μｇ／２５ｍＬ铜（Ⅱ）回归方程为△Ａ＝１．９７５ｃ＋０．００３，相关系数为０．９９９９，以△Ａ＝０．０１计算得测定下限为０．００５μｇ／２５ｍＬ。方法应用于铅基合金，纯铅粉和标准镁合金中铜     

催化动力学光度法测定痕量铜的研究

本文研究了在氨水介质中铜（Ⅱ）催化过氧化氢氧化亮黄的褪色反应及其动力学条件，建立了一种超高灵敏、高选择性的测定环境试样中痕量铜的新方法，可测定０．００４～０．５μｇ／２５ｍＬ范围内的铜（Ⅱ）。     

新阻化动力学光度法测定痕量铜

１引言我们在实验中发现，铜（Ⅱ）抑制Ｍｎ（Ⅱ）催化铬（Ⅵ）与二安替比林基对氯苯基甲烷（ＤＡＰＣＭ）的显色反应，从而建立了一种新的测定铜（Ⅱ）的阻化动力学方法。该法灵敏度高，选择性较好，线性范围较宽，稳定时间长，操作简便。用于粗铅和铝合金中铜的测定，结果满意。２实验部分２．１主要仪器和试剂７２２型光栅分光光度计（山东高密分析仪器厂）；５０１型超级恒温器（江苏实验仪器厂）。铬（Ⅵ）标准溶液：１．０ｇ／Ｌ和１．０ｇ／Ｌ；铜（Ⅱ）标准溶液：１．１０ｇ／Ｌ和１．０ｍｇ／Ｌ；０．２％（Ｗ／Ｖ）ＤＡＰＣＭ溶液…     

铜（Ⅱ）锌（Ⅱ）－氟哌酸体系电化学行为及示波极谱法研究

铜（Ⅱ）和锌（Ⅱ）分别在０．１ｍｏｌ／ＬＫＨ＿２ＰＯ＿４－Ｎａ＿２ＨＰＯ＿４缓冲溶液（ｐＨ６．５）和０．２５ｍｏｌ／ＬＮＨ＿４Ｃｌ溶液中，与氟哌酸形成良好的络合吸附波，峰电位分别为－０．２６Ｖ和－１．２８Ｖ（ｖｓ；ＳＣＥ）；络合比分别为１：３和１：２；峰电流与铜（Ⅱ）和锌（Ⅱ）的浓度均在４．０×１０￣（－７）～５．０×１０￣（－６）ｍｏｌ／Ｌ范围内呈线性关系，检测限分别为７．０×１０￣（－８）和５．０×１０￣（－８）ｍｏｌ／Ｌ。用线性扫描和循环伏安法等手段研究体系的行为，表明均具吸附性，而铜（Ⅱ）－氟哌酸体系属络合物中铜（Ⅱ）的两电子还原的可逆过程。     

铜（Ⅱ）催化DBN偶氮胂的褪色反应特性及应用

本文研究了铜（Ⅱ）催化抗坏血酸还原ＤＢＮ偶氮胂的褪色反应特性，测定了反应级数和以应的速率方程，拟定了反应的最佳条件，建立测定铜（Ⅱ）的新方法，其检出限为３．４５×１０＾１０ｇ／ｍＬ，线性范围为０～０．１２μｇ／１０ｍＬ，用于人发中痕量铜（Ⅱ）的测定，结果满意。     

铜（Ⅱ）锌（Ⅱ）—氟哌酸体系电化学行为及示波极谱法研究

铜（Ⅱ）和锌（Ⅱ）分别在０．１ｍｏｌ／ＬＫＨ２ＰＯ４－Ｎａ２ＨＰＯ４缓冲溶液（ｐＨ６．５）和０．２５ｍｏｌ／ＬＮＨ４Ｃｌ溶液中，与氟哌酸形成良好的络合吸附波，峰电位分别为－０．２６Ｖ和－１．２８Ｖ（ｖｓ．ＳＣＥ），络合比分别为１：３和１：２，峰电流与铜（Ⅱ）和锌（Ⅱ）的浓度均在４．０×１０＾－７～５．０×１０＾－６ｎｏｌ／Ｌ范围内呈线性关系，检测限分别为７．０×１０＾－８和５．０×１０＾－８ｍｏｌ     

甲基橙－溴化十六烷基三甲胺三元络合物分光光度法测定微量铜（Ⅱ）

本文介绍了甲基橙与铜（Ⅱ）在ｐＨ３．８时与溴化十六烷基三甲胺形成三元胶束络合物增溶于聚乙烯醇体系中，其表观摩尔吸光系数ε＿（５８０）为２．９５×１０￣６Ｌ·ｍｏｌ￣（－１）·ｃｍ￣（－１），铜（Ⅱ）浓度在０．１～０．６μｇ／２５ｍＬ范围内与吸光度成线性关系。用此法分析人发中铜含量，结果满意。     

配位化学中的直线自由能关系──XX．铜（Ⅱ）－1，4，7，10－四氮杂环十三烧－11，13－二酮－α－氨基酸（5－取代邻菲罗啉）三元配合物的稳定性研究

本文采用ｐＨ法，在２５．０±０．１℃，Ｉ＝０．１ｍｏｌ·ｄｍ－３ＫＮＯ３存在条件下，测定了铜（Ⅱ）－１，４，７，１０－四氮杂环十三烷－１１，１３－二酮－α－氨基酸（５－取代邻菲罗啉）三元配合物的稳定常数，探讨了大环多胺配体与金属离子的配位能力、配位方式、及其在水溶液中铜（Ⅱ）配合物的稳定性，同时也研究了５－取代邻菲罗啉与铜（Ⅱ）之间的ｄ－ｐ反馈π键、取代基的Ｈａｍｍｅｔｔ诱导效应对三元配合物稳定性的影响．     

铜(Ⅱ)-1,4,8,11-四氮杂环十四烷-12,14-二酮-α-氨基酸(5-取代邻菲咯啉)三元配合物的稳定性

本文采用ｐＨ法，在２５．０±０．１℃，Ｉ＝０．１ｍｏｌ·ｄｍ－３ＫＮＯ３存在条件下，测定了铜（Ⅱ）－１，４，８，１１－四氮杂环十四烷－１２，１４－二酮－α－氨基酸（５－取代邻菲咯啉）三元配合物的稳定常数，探讨了大环多胺配体与金属离子的配位能力、配位方式、及其在水溶液中铜（Ⅱ）配合物的稳定性，同时也研究了５－取代邻菲咯啉与铜（Ⅱ）之间的ｄ－ｐ反馈π键，取代基的Ｈａｍｍｅｔ诱导效应对三元配合物稳定性的影响。     

在胶束溶液中用5－Br－PADN示波极谱测定痕量铜

在ｐＨ１０．０的ＮＨ＿３·Ｈ＿２Ｏ－ＮＨ＿４Ｃｌ缓冲溶液中，当有０．００３０％ＣＴＭＡＢ存在时，Ｃｕ（Ⅱ）与５－Ｂｒ－ＰＡＤＮ配合物在－０．４５Ｖ产生一灵敏配合物吸附波，用于测定铜（Ⅱ）时，线性范围为０．００５０～０．６０μｇ／ｍＬ，检测下限为５．０×１０￣（－８）ｍｏｌ／Ｌ。所提出的方法可用于矿石中微量铜的测定，回收率在９２％～１０４％之间。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.