Synthesis and Mesomorphic Properties of Poly(oxyethylene) with [(6‐Heptylsulfonyl)hexylthio]methyl Side Groups

[(6‐Heptylsulfonyl)hexylthio]methyl‐substituted poly(oxyethylene) bearing a very polar sulfone group in the middle of the alkyl side chain was successfully synthesized by the reaction of poly[oxy(chloromethyl)ethylene] and (6‐heptylsulfonyl)hexyl thioacetate with sodium ethoxide in N,N‐dimethylacetamide. The ordered phase of the polymer was studied using X‐ray diffraction, differential scanning calorimetry, and IR spectroscopy. The polymer was found to be liquid crystalline, although not having any conventional mesogenic group. It was suggested that the highly polar sulfone group in the side chain induces the self‐assembly of the liquid crystalline phase.     

Synthesis and properties of poly(oxyethylene)s containing thioether,sulfoxide, or sulfone groups

Poly[oxy(ethylthiomethyl)ethylene] (ETE) was prepared from poly[oxy (chloromethyl)ethylene] (CE) by reaction with sodium ethanethiolate. Sulfoxide and sulfone analogues were synthesized by oxidation of the poly[oxy(ethylthiomethyl)ethylene]. By changing the chloromethyl/sodium ethanethiolate ratio, poly[oxy (chloromethyl)ethylene-co-oxy(ethylthiomethyl)ethylene] (CE-ETEs) were easily made. Poly[oxy(ethylsulfinylmethyl)ethylene] (ESXE), poly[oxy(chloromethyl)ethylene-co-oxy(ethylsulfinylmethyl)ethylene] (CE-ESXEs), poly[oxy(ethylsulfonylmethyl)ethylene] (ESE), and poly[oxy(chloromethyl)ethylene-co-oxy(ethylsulfonylmethyl)ethylene] (CE-ESEs) were obtained by oxidation of ETE or CE-ETEs. There was little if any chain degradation. The (co)polymer structures were confirmed by FTIR and ¹H-NMR spectroscopic studies. Their thermal properties were studied by DSC and TGA. T_gs of ETE, ESXE, and ESE were -57, 36, and 57°C, respectively, and T_d,os (initial decomposition temperature, TGA) were 331, 198, and 308°C, respectively. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 793–801, 1998     

Oxyethylene copolymers with chloromethyl and (alkylthio)methyl or (alkylsulfonyl)methyl side groups: Syntheses and Tg/composition relationships

New classes of copolymers, poly[oxy(chloromethyl)ethylene]/poly[oxy-((alkylthio)methyl)ethylene] copolymers (CE-ATEs), poly[oxy((alkylthio)methyl)-ethylene]s (ATEs), poly[oxy(chloromethyl)ethylene]/poly[oxy((alkylsulfonyl)meth-yl)ethylene] copolymers (CE-ASEs), and poly[oxy((alkylsulfonyl)methyl)ethylene]s (ASEs) have been made for the first time. The thioether-containing polymers (CE-ATEs and ATEs) were synthesized by reacting poly[oxy(chloromethyl)ethylene] (CE, poly(epichlorohydrin)) with different amounts of sodium alkanethiolates. The sulfone-containing polymers (CE-ASEs and ASEs) were synthesized by oxidizing the CE-ATEs and ATEs using m-chloroperoxybenzoic acid. The Fox equation, a linear relationship, fit the T_g/composition data for most CE-ATEs. The T_g's of the CE-ASEs showed positive deviations from those calculated using the Fox equation. The Johnston equation, in which steric and/or polar interactions between dissimilar monomeric units are considered by using T_gAB (the T_g of the AB or BA dyad), fit the T_g/composition data for all copolymers in this study. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36 : 495–504, 1998     

Structure and surface properties of polyacrylates with short fluorocarbon side chain: Role of the main chain and spacer group

The degradation of poly(fluoroalkyl acrylate)s with long perfluoroalkyl groups, especially with perfluorooctyl group, leads to the release of biopersistent perfluorooctanoic acid (PFOA) or perfluorooctanesulfonic acid (PFOS). To find the environmentally friendly substitutes, a series of nonbiopersistant fluorinated polymers containing perfluorohexyl groups in the side chains have been synthesized and characterized. This study was then focused on the role played by the main chain and spacer group located in the side chain between the backbone and the fluorinated segment and, in particular, on the properties of poly[2‐[[[[2‐(perfluorohexyl)]‐sulfonyl]methyl]amino]ethyl] acrylate (PC6SA), methacrylate (PC6SMA) and poly[(perfluorohexyl)ethyl] methacrylate (PC6MA). Surface properties and bulk organization of fluorinated side chains of those polymers were investigated by contact angles, differential scanning calorimetry, optical polaring microscopy, and wide‐angle X‐ray scattering. Results were compared with those obtained with poly[(perfluorohexyl) ethyl] acrylate (PC6A). They all had very low surface free energies. Surprisingly, with the same perfluoalkyl chain, PC6SA and PC6SMA with a N‐methylsulfonamide spacer group were found to be organized in a liquid crystalline lamellar structure, whereas PC6A and PC6MA were found to be amorphous. This was mainly attributed to the steric term and polarity of N‐methylsulfonamide group that tended to facilitate the orientation of the perfluorinated segments in smectic phases. PC6SA, PC6SMA, and PC6MA had rich dynamic water repellency because of the low surface molecular mobility. This phenomenon relates to the crystallization of side chains or high glass transition temperature. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2584–2593, 2010     

Synthesis and characterization of side‐chain liquid crystalline ABC triblock copolymers with p‐methoxyazobenzene moieties by atom transfer radical polymerization

A series of novel side‐chain liquid crystalline ABC triblock copolymers composed of poly(ethylene oxide) (PEO), polystyrene (PS), and poly[6‐(4‐methoxy‐4′‐oxy‐azobenzene) hexyl methacrylate] (PMMAZO) were synthesized by atom transfer radical polymerization (ATRP) using CuBr/1,1,4,7,7‐pentamethyldiethylenetriamine (PMDETA) as a catalyst system. First, the bromine‐terminated diblock copolymer poly(ethylene oxide)‐block‐polystyrene (PEO‐PS‐Br) was prepared by the ATRP of styrene initiated with the macro‐initiator PEO‐Br, which was obtained from the esterification of PEO and 2‐bromo‐2‐methylpropionyl bromide. An azobenzene‐containing block of PMMAZO with different molecular weights was then introduced into the diblock copolymer by a second ATRP to synthesize the novel side‐chain liquid crystalline ABC triblock copolymer poly(ethylene oxide)‐block‐polystyrene‐block‐poly[6‐(4‐methoxy‐4′‐oxy‐azobenzene) hexyl methacrylate] (PEO‐PS‐PMMAZO). These block copolymers were characterized using proton nuclear magnetic resonance (¹H NMR) and gel permeation chromatograph (GPC). Their thermotropic phase behaviors were investigated using differential scanning calorimetry (DSC) and polarized optical microscope (POM). These triblock copolymers exhibited a smectic phase and a nematic phase over a relatively wide temperature range. At the same time, the photoresponsive properties of these triblock copolymers in chloroform solution were preliminarily studied. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4442–4450, 2008     

Structure of self-assembled multilayers prepared from water-soluble polythiophenes

We have studied the structure and morphology of self-assembled polyelectrolyte multilayers prepared using poly(styrenesulfonate) (PSS) and four different cationic poly(alkoxythiophene) derivatives bearing methylimidazolium-terminated ionic side chain at the 3-position of the thiophene ring: poly(1-methyl-3-[3-[3-thienyloxy]-propyl]-1H-imidazolium) (P3TOPIM), poly(1-methyl-3-[6-[3-thienyloxy]-hexyl]-1H-imidazolium) (P3TOHIM), poly(1-methyl-3-[2-[(4-methyl-3-thienyl)oxy]-ethyl]-1H-imidazolium ) (P4Me-3TOEIM), and poly(1-methyl-3-[6-[(4-methyl-3-thienyl)oxy]-hexyl]-1H-imidazolium ) (P4Me-3TOHIM). All the multilayers exhibited regular growth. The thickness of the multilayers was measured with ellipsometry, their layer-by-layer growth was followed by polarization modulation infrared reflection-absorption spectroscopy (PM-IRRAS) and ellipsometry, and the morphology of the films was studied by atomic force microscopy (AFM). The length of the methylimidazolium-terminated side chain (C(n), n = 2, 3, 6) and the substituent (H or Me) at the 4-position of the thiophene ring were varied. All multilayers were inhomogeneous in the sub-micrometer scale and contained aggregates of two kinds. The large ones with a low and constant surface number density were attributed to PSS, whereas the small aggregates were polythiophene-based. The surface density of these organic semiconducting nanoparticles greatly depended on the structure of polythiophene, being favored by polymer regioregularity and the length of the side chain. The side chains remained disordered in all the multilayers, but with polythiophenes having hexyl chains both the imidazolium and thiophene rings tended to orient themselves more perpendicular to the surface than in films containing shorter chains (C2 or C3). The relative water content of the multilayers (at 7.1% relative humidity) did not depend on the film thickness and was the lowest for P4Me-3TOHIM. As the number of bilayers increased the methylimidazolium-sulfonate ion pairs gradually weakened and became more individually hydrated.     

Ni基催化剂上的乙烷部分氧化制合成气

There is abundant supply of light alkanes and relatively few routes of converting them to more valuable products. Although CH4 predominates in natural gas, it also contains C2H6, C3H8 and C4H10 (from 5 % to 30% ), and with C2H6 as the most abundant secondary component[1]. Partial oxidation of methane to syngas (CH4 +0.5O2 →CO + 2H2) over nickel-based catalysts has received intensive attention[2]and much research has been devoted to conversion of ethane to ethylene[3]. Ethylene has been shown to be formed from ethane by thermal dehydrogenation (C2H6 →C2H4 + H2) and oxidative dehydrogenation (C2H6 + 0. 5O2 →C2H4 + H2O). These processes are operated under severely fuel-rich conditions. The carbon-deposition and consequent deactivation of the catalysts are major problems, which leads to poor conversion of the above mentioned reactions. As an alternative strategy for the elaboration of ethane, little work on the partial oxidation of ethane (POE) to syngas over nickel-based catalysts has been reported. Provided it could be produced from C2H6with high selectivity and high conversion over nickel-based catalysts, syngas could be directly obtained from natural gas including CH4 and C2H6 with high selectivity and conversion. This may lead to better utilization of the light fractions from natural gas and refineries. In the present paper, POE to syngas over nickel-based catalysts was investigated.     

Kinetic comparison of isomeric oligo(ethylene oxide) (meth)acrylates: Aqueous polymerization of oligo(ethylene oxide) methyl ether methacrylate and methyl 2-(oligo(ethylene oxide) methyl ether)acrylate macromonomers

The photoinduced energy/electron transfer-reversible addition-fragmentation chain transfer (PET-RAFT) polymerizations of oligo(ethylene oxide) monomethyl ether methacrylate (OEOMA, also known as poly[ethylene glycol] methyl ether methacrylate, PEGMA) and isomeric methyl 2-(oligo(ethylene oxide) methyl ether)acrylate (2OEOAM) macromonomers with OEO average degree of polymerization of 22 or 45 were conducted in aqueous media to provide insight into the effect of monomer structure on grafting-through RAFT of 1,1-disubstituted acrylic macromonomers. The polymerizations of all four monomers reached nearly quantitative conversion. The longer macromonomers polymerized faster than the shorter ones within the same monomer class. The OEO side chain at the α (i.e., 2-) position of isomeric acrylates significantly slowed RAFT polymerization in comparison with OEO ester side chain of methacrylates.     

Surface characterization and liquid crystal alignment behavior of comb-like poly(oxyethylene)/poly(3-hexylthiophene) blend films

The blend surfaces of poly[oxy(n-decylsulfonylmethyl)ethylene] (CH(3)-10SE) and poly (3-hexylthiophene) (P3HT) with different weight ratios were prepared by spin coating the polymer solution mixtures. In this study, their surface properties such as surface morphology, chemical composition, molecular structure, and wettability were systematically studied and correlated with liquid crystal (LC) alignment behaviors on the blend films. Therefore, we found that CH(3)-10SE part with a well-ordered side chain structure predominantly affects the both of wettability and LC alignment behavior of the blend films while there was no clear association between the wettability and the LC alignment behavior.     

Synthesis of poly(ester amide)s by the melt polycondensation of semiaromatic polyesters with ethanolamine and their characterization

Semiaromatic poly(ester amide)s (PEAs) were synthesized by the melt polycondensation of ethanolamine (EA) derivatives with dimethyl terephthalate and ethylene glycol in the presence of tetrabutyl titanate as a catalyst, and their crystallization and thermal properties were investigated. The introduction of an amide group into a semiaromatic polyester such as poly(ethylene terephthalate) (PET) produced PEAs (EA-modified PET polymers) with an increase in the melting point. However, these PEAs were found to decompose at a lower temperature than PET on the basis of TGA. Moreover, direct pyrolysis/mass spectrometry measurements suggested that an initial step of the thermal decomposition was a β-CH hydrogen-transfer reaction via asix-member ring transition state at the ester–ethylene–amide unit, at which carbon–oxygen bond scission took place to yield carboxyl and N-vinylamide end groups. Furthermore, molecular orbital calculations using trimer models bis[2-[[4-(methoxycarbonyl)benzoyl]oxy]ethyl]terephthalate, N-[2-[[4-(methoxycarbonyl)benzoyl]oxy]ethyl]-4-[2-[[4-(methoxycarbonyl)benzoyl]oxy]ethyloxycarbonyl]benzamide, and N,N′-bis[2-[[4-(methoxycarbonyl)benzoyl]oxy]ethyl]terephthalamide strongly supported the idea that the β-CH hydrogen-transfer reaction in the thermal decomposition of PEAs might occur more easily at the methylene group next to the amide group in an ester–ethylene–amide unit rather than at the methylene group next to the ester group in an ester–ethylene–ester unit. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2184–2193, 2007     

Regiochemical Trends in Intramolecular [2 + 2] Photocycloadditions of 6-(prop-2-enyl)cyclohex-2-enones and 5-(prop-2-enyl)cyclopent-2-enones

The effect of substituents (X ? H, Me, or F at C(6), R ? H or Me at C(2′) of the allyl side chain) on the photoisomerization (λ = 350 nm) of 6-allylcyclohex-2-enones 1 in MeCN is studied. Substituents X control the overall efficiency of intramolecular [2 + 2] photocycloadduct formation (Φ: Me > F > H) but do not exercise an influence on the orientation of addition of the exocyclic double bond to the enone C?C bond. In contrast, replacement of the prop-2-enyl (R ? H) by a 2-methylprop-2-enyl (R ? Me) side chain causes a change in the tricyclo[3.3.1.0^2,7]nonan-6-one 4 vs. tricyclo[4.2,1.0^3,8]nonan-7-one ( 5 ) product ratio from 100:0 (R ? H) to roughly 2:1 (R ? Me) but has almost no bearing on the relative rates of conversion of 1 to products. For C(6)-unsubstituted enones 1aa and 1ba (X ? H), the efficiency of cyclization becomes low enough so that lumiketone rearrangement to bicyclohexanones 6 and 3-isopropylcyclopent-2-enones 9 becomes competitive. Enones 9 undergo consecutive intramolecular [2 + 2] photocycloaddition to tricyclo[3.2.1.0^3,6]octan-2-ones 7 and to tricyclo[3.2.1.0^3,6]octan-7-ones 8 , compounds 8 only being formed when R ? Me.     

Synthesis and Characterizations of Regioregular Poly(3‐alkylthiophene) with Alter1483ting Dodecyl/1H,1H,2H,2H‐Perfluorooctyl Side Chains

A regioregular poly[4′‐dodecyl‐3‐(1H,1H,2H,2H‐perfluorooctyl)‐2,2′‐bithiophene] (P3DDFT) with alternating alkyl and semifluoroalkyl side chains were synthesized. Short ethylene spacer between perfluorohexyl part and thiophene did not largely affect the absorption and emission properties of the polythiophene backbone in comparison with poly(3‐dodecylthiophene) (P3DDT). P3DDFT showed a larger onset of the oxidation potential (+0.17 V) observed by cyclic voltamogram due to the electron withdrawing effect of the fluoroalkyl part. Thermal analysis and X‐ray diffraction patterns indicated that P3DDFT in the solid state forms a semicrystalline lamellar structure that is similar to that of P3DDT. Ultraviolet photoemission spectroscopy was also used to investigate their electron structure in the films. Comparison of hole mobilities in the films suggested that P3DDFT could have a less ordered packing structure compared to P3DDT both in the bulk and at the dielectric interface.

     

Revealing Active Sites and Reaction Pathways in Methane Non-Oxidative Coupling over Iron-Containing Zeolites

Non-oxidative coupling of methane is a promising route to obtain ethylene directly from natural gas. We synthesized siliceous [Fe]zeolites with MFI and CHA topologies and found that they display high selectivity (>90 % for MFI and >99 % for CHA) to ethylene and ethane among gas-phase products. Deactivated [Fe]zeolites can be regenerated by burning coke in air. In situ X-ray absorption spectroscopy demonstrates that the isolated Fe³⁺ centers in zeolite framework of fresh catalysts are reduced during the reaction to the active sites, including Fe²⁺ species and Fe (oxy)carbides dispersed in zeolite pores. Photoelectron photoion coincidence spectroscopy results show that methyl radicals are the reaction intermediates formed upon methane activation. Ethane is formed by methyl radical coupling, followed by its dehydrogenation to ethylene. Based on the observation of intermediates including allene, vinylacetylene, 1,3-butadiene, 2-butyne, and cyclopentadiene over [Fe]MFI, a reaction network is proposed leading to polyaromatic species. Such reaction intermediates are not observed over the small-pore [Fe]CHA, where ethylene and ethane are the only gas-phase products.     

Fluorous dimethyl sulfide: a convenient,odorless, recyclable borane carrier

Borane gas and 2-(perfluorooctyl)ethyl methyl sulfide form a solid comprised of an approximately 1:1 mixture (fluorous BMS) of sulfide and the corresponding sulfide-borane. Fluorous BMS permits hydroboration of alkenes in a dichloromethane/perfluorinated hydrocarbon mixture with subsequent recycling of the fluorous sulfide by fluorous extraction. The use of fluorous BMS in the asymmetric reduction of ketones catalyzed by a chiral oxaborolidine catalyst, and in the reduction of other functional groups, is also reported. [reaction: see text]     

Aggregation and catalytic properties of polymer-calix[4]resorcinarene-water-dimethylformamide systems

The aggregation in poly(ethylene imine) (poly(ethylene glycol))-calix[4]resorcinarene-water-dimethylformamide (30 vol %) systems and the catalytic activity of these compositions in hydrolysis of 4-nitrophenylbis(chloromethyl)phosphinate are studied by conductometry, tensiometry, lightscattering, and viscometry. Critical association concentrations, hydrodynamic radii of polymer-colloid aggregates, and kinetic parameters of hydrolysis are determined.     

Biosynthesis of lipstatin. Incorporation of multiply deuterium-labeled (5Z,8Z)-tetradeca-5,8-dienoic acid and octanoic acid.

Fermentation experiments with Streptomyces toxytricini were performed using (5Z,8Z)-[10,11,12,12-(2)H]tetradeca-5,8-dienoic acid or a mixture of [2,2-(2)H(2)]- and [8,8,8-(2)H(3)]octanoic acid as supplements. (2)H NMR and mass spectroscopy confirmed the incorporation of (5Z,8Z)-[10,11,12,12-(2)H]tetradeca-5,8-dienoic acid into the C(13) side chain as well as into the C(6) side chain of lipstatin. Moreover, deuterium was incorporated into the C(6) side chain of lipstatin from the 8-position but not from the 2-position of octanoate. The data establish that the beta-lactone moiety of lipstatin is formed by condensation of a C(8) and a C(14) fatty acid with a concomitant exchange of the H-2 atoms of the C(8) fatty acid.     

Hydrothermal chemistry of oligomeric vanadium oxyfluorides

Nine new vanadium oxyfluorides, containing ten different oligomeric vanadium (oxy)fluoride anions have been prepared by solvothermal synthesis in water-ethylene glycol and using organic cations as co-crystallising agents. Crystal structures are reported for each. Amongst the ten structure types, five represent previously unobserved moieties, including one monomeric unit (cis-[VOF4(H2O)]2-), two dimers ([V2O2F6(H2O)2]2- and [V2O2F8]4-) and two tetramers (both isomers of composition [V4O4F14]6-). Structural relationships between the various units are discussed, together with some rationalisation of their occurrence as a function of synthetic variables.     

Oxyalkylene polymers with alkylsulfonylmethyl side chains: Gas barrier properties

Gas barrier properties of alkylsulfonylmethyl-substituted poly(oxyalkylene)s are discussed. Oxygen permeability coefficients of three methylsulfonylmethyl-substituted poly(oxyalkylene)s, poly[oxy(methylsulfonylmethyl)ethylene] (MSE), poly[oxy(methylsulfonylmethyl)ethylene-co-oxyethylene] (MSEE), and poly[oxy-2,2-bis (methylsulfonylmethyl)trimethylene oxide] (MST) were measured. MSEE, which has the most flexible backbone of the three polymers, had an oxygen permeability coefficient at 30°C of 0.0036 × 10⁻¹³ cm³(STP)·cm/cm²·s·Pa higher than that of MSE, 0.0014 × 10⁻¹³ cm³(STP)·cm/cm²·s·Pa, because the former polymer's T_g was near room temperature. MST with two polar groups per repeat unit and the highest T_g showed the highest oxygen permeability, 0.013 × 10⁻¹³ cm³(STP) · cm/cm²·s·Pa, among the three polymers, probably because steric hindrance between the side chains made the chain packing inefficient. As the side chain length of poly[oxy(alkylsulfonylmethyl)ethylene] increased, T_g and density decreased and the oxygen permeability coefficients increased. The oxygen permeability coefficient of MSE at high humidity (84% relative humidity) was seven times higher than when it was dry because absorbed water lowered its T_g. At 100% relative humidity MSE equilibrated to a T_g of 15°C after 2 weeks. A 50/50 blend of MSE/MST had oxygen barrier properties better than the individual polymers (O₂ permeability coefficient is 0.0007 × 10⁻¹³ cm³(STP)·cm/cm² ·s·Pa), lower than most commercial high barrier polymers. At 100% relative humidity, it equilibrated to a T_g of 42°C, well above room temperature. These are polymer systems with high gas barrier properties under both dry and wet conditions. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36 : 75–83, 1998     

Equilibrium and dynamic surface tension properties of partially fluorinated quaternary ammonium salt gemini surfactants

The equilibrium and dynamic surface tension properties of a partially fluorinated quaternary ammonium salt gemini surfactant 1,2-bis[dimethyl-(3-perfluoroalkyl-2-hydroxypropyl)ammonium]ethane bromide (C(n)(F)C3-2-C3C(n)F, where n represents fluorocarbon chain lengths of 4, 6, and 8) were investigated, and the effects of the fluorocarbon chain length and the number of chains on them were discussed. The plot of the logarithm of the critical micelle concentration (cmc) against the fluorocarbon chain length for C(n)(F)C3-2-C3C(n)F showed a linear decrease with an increase in chain length. On the basis of the slope of this plot, it was found that the variation in cmc with respect to the chain length is large for fluorinated gemini surfactants. The surface tension at the cmc decreased significantly; this surface tension value is lower than that of conventional fluorinated monomeric surfactants. In particular, the lowest value was 13.7 mN m(-1) for n = 8. Furthermore, it was confirmed that the kinetics of adsorption at the interface decrease with an increase in the fluorocarbon chain length and the concentration.     

Effect of side‐chain end groups on the optical,electrochemical, and photovoltaic properties of side‐chain conjugated polythiophenes

Three new side‐chain conjugated polythiophene derivatives, poly{3‐[2‐(3‐methoxy‐4‐octyloxy‐phenyl)‐vinyl]‐thiophene} (P3MOPVT), poly{3‐[2‐(3,5‐dimethoxy‐4‐octyloxy‐phenyl)‐vinyl]‐thiophene} (P3DMOPVT), and poly{3‐[2‐(3,4‐dioctyloxy‐phenyl)‐vinyl]‐thiophene} (P3DOPVT), were synthesized by Wittig‐Hornor reaction and GRIM method and compared with poly{3‐[2‐(4‐octyloxy‐phenyl)‐vinyl]‐thiophene} (P3OPVT) for investigating the effect of the end groups of the conjugated side‐chain on the properties of the polymers. Owing to the electron‐donating ability of methoxy groups, the visible absorption peaks of P3MOPVT and P3DMOPVT solutions and films become stronger and red‐shifted compared with P3OPVT. The electrochemical bandgaps of the four polymers are 2.15 eV for P3OPVT, 1.99 eV for P3MOPVT, 1.85 eV for P3DMOPVT, and 2.36 eV for P3DOPVT, respectively, which indicate that the electron‐donating ability of the methoxy end group on the conjugated side chain of P3MOPVT and P3DMOPVT and the large steric hindrance of the two octyloxy end groups on the conjugated side chain of P3DOPVT have obvious influence on the electrochemical properties of the side‐chain conjugated polythiophenes. Polymer solar cells were fabricated with a structure of ITO/PEDOT:PSS/Polymer:PCBM/LiF/Al. The best device, based on P3DMOPVT, shows a power conversion efficiency of 1.63% under the illumination of AM1.5, 80 mW/cm². © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4916–4922, 2006