高指数晶面裸露的贵金属纳米晶体的合成

由于在高指数晶面上存在高密度的台阶位、扭结位原子等,高指数晶面裸露的贵金属纳米晶体一般表现出优越的物理化学性能,在催化、电化学等方面都有很重要的应用前景．近年来,研究人员围绕高指数晶面的制备进行了大量的工作并取得了一定进展．本文重点从合成制备方法的角度出发,结合本课题组的相关研究,系统总结了现有的有关制备高指数晶面裸露的贵金属纳米晶体的一些最新研究成果．从电化学方法、“帽”式试剂保护法、欠电位沉积原子层保护法、动力学调控、氧化刻蚀溶解再生长法以及模板法等几个方面对现有的高指数晶面裸露的贵金属纳米晶体的制备进行了总结．     

铂纳米晶的形状控制合成及应用

形状控制的铂纳米晶由于具有高选择性和催化活性,近年来受到越来越多的关注。各种低指数晶面所围成的铂纳米晶,包括立方体、四面体、八面体、枝状晶体等可以通过胶体法或热解法来制备。表面具有高指数晶面结构的二十四面体等多面体也已经由电化学方法得到。本文评述了形状控制的铂纳米晶的合成方法、表征和应用等方面的进展,分析了铂纳米晶稳定性的影响因素,并对目前铂纳米晶合成及应用研究中存在的主要问题和发展前景进行了探讨和展望。     

高指数晶面纳米催化剂的电化学制备及应用

催化剂的性能与其表面结构及组成密切相关,高指数晶面纳米晶的表面含有高密度的台阶原子等活性位点而表现出较高的催化活性. 本文综述了电化学方波电位方法用于Pt、Pd、Rh等贵金属高指数晶面结构纳米晶催化剂的制备、形成机理及其电催化性能的研究. 针对贵金属利用率问题,还着重介绍了具有较高质量活性的小粒径Pt二十四面体的制备. 在此基础上,还介绍了电化学方波电位方法用于低共熔溶剂中制备高指数晶面纳米晶,以及高指数晶面纳米催化剂的表面修饰及应用;最后对高指数晶面纳米催化剂的发展做出了展望.     

纳米晶体表面结构控制:过饱和度法调控原理与应用

纳米晶体很多重要的物理化学性质与其表面结构密切相关,纳米晶的表面结构调控及相关理论研究是前沿和热点领域.本评述总结了非平衡态过饱和条件下纳米晶体生长热力学相关理论及其在离子晶体、分子晶体、贵金属、氧化物、金属有机框架等5类纳米晶体表面结构控制中的应用.从热力学推导出的"类"Thomson-Gibbs方程可以发现,晶体裸露晶面的表面能与其生长过程生长基元的过饱和度成正比.该理论揭示了过饱和度在纳米晶体表面结构控制中的重要作用,为合理设计合成具有特定表面结构的纳米晶提供了有效指导.     

{111}晶面暴露对介孔金红石TiO_2单晶光催化产氢的促进作用（英文）

光催化反应发生在半导体材料的表面,材料表面的原子/电子结构直接影响光催化剂的活性或选择性.因此,发展具有特定晶面的半导体光催化剂受到各国学者的普遍关注,被认为是调控光催化材料性能的有效途径之一.自2008年yang等首次合成高表面能{001}晶面占优的锐钛矿Ti O2单晶以来,控制合成暴露不同晶面Ti O2晶体的研究得到了迅猛的发展,已发展了多种方法合成了具有不同晶面的Ti O2晶体.研究表明,选择性地暴露特定的活性晶面能够显著地提高光催化剂的活性或者改变光催化反应的选择性.但是,含有完整晶面构型的Ti O2单晶样品的颗粒尺寸一般都较大,通常为几微米,因而显著增加了光生载流子传输与分离的难度,并且导致材料较小的比表面积,限制了对光催化活性的进一步提高.能否在合成含特定晶面单晶的同时增加多孔结构成为有效解决这一问题的关键.最近,Crossland等采用晶种模板法成功合成了介孔的锐钛矿Ti O2单晶,并且通过光电器件研究证实了采用该思路可进一步提高材料的光电性能.金红石Ti O2在光催化全分解水方面具有独特的优势,然而关于多孔单晶金红石Ti O2的研究相对较少,尤其是合成热力学不稳定的高表面能{111}晶面完全暴露的多孔金红石单晶面临较大的技术挑战因而一直未见文献报道.本文利用晶种模板法,以Ti Cl4溶液为含Ti前驱体、Na F为形貌控制剂、采用水热处理制备出不同比例{111}晶面的介孔金红石单晶.我们前期工作表明,Na F可作为形貌控制剂合成低表面能{110)晶面占优的介孔金红石单晶.本文发现,通过改变Na F的添加量,可有效调变{111}/{110}晶面比例,最终合成完全暴露{111}高表面能的介孔金红石Ti O2单晶.扫描电镜结果显示,当添加20 mg NaF时,合成{110}占优的具有高长径比的介孔晶体;当Na F用量增加到40 mg时{110}晶面进一步缩短;至80 mg时则制备出{111})高能面完全暴露的金红石Ti O2晶体.值得注意的是,对比研究表明,不采用模板合成了与多孔晶体完全相对应的不同{111}/(110}晶面比例的实心金红石晶体.透射电镜及选区电子衍射以及结合X射线衍射进一步证实,多孔的金红石Ti O2晶体与实心金红石单晶均都为单晶结构,孔结构贯穿于样品内部且具有较高的晶面结晶性.氮气吸附实验发现,虽然三个不同晶面比例介孔金红石单晶样品间的形貌具有显著的差异,但比表面积非常相近(分别为24,25,28 m2/g),孔径也都为50 nm左右,该值与所用SiO 2模板球的直径以及TEM观察结果相一致.光催化产氢性能结果表明,选择性的暴露活性晶面显著提高了光催化活性,仅含高能面{111}的介孔金红石单晶样品具有最高的产氢速率(约800μmol h–1 g–1),比常规{110}晶面占优的介孔单晶样品速率提高了约一倍.尤其比实心单晶样品的产氢速率提高了至少一个数量级,这应归结于介孔结构特性所导致的表面反应活性位增加、电子传输距离缩短以及光吸收增强协同作用的结果.     

{111}晶面暴露对介孔金红石TiO2单晶光催化产氢的促进作用

光催化反应发生在半导体材料的表面,材料表面的原子/电子结构直接影响光催化剂的活性或选择性。因此,发展具有特定晶面的半导体光催化剂受到各国学者的普遍关注,被认为是调控光催化材料性能的有效途径之一。自2008年yang等首次合成高表面能{001}晶面占优的锐钛矿TiO2单晶以来,控制合成暴露不同晶面TiO2晶体的研究得到了迅猛的发展,已发展了多种方法合成了具有不同晶面的TiO2晶体。研究表明,选择性地暴露特定的活性晶面能够显著地提高光催化剂的活性或者改变光催化反应的选择性。但是,含有完整晶面构型的TiO2单晶样品的颗粒尺寸一般都较大,通常为几微米,因而显著增加了光生载流子传输与分离的难度,并且导致材料较小的比表面积,限制了对光催化活性的进一步提高。能否在合成含特定晶面单晶的同时增加多孔结构成为有效解决这一问题的关键。最近, Crossland等采用晶种模板法成功合成了介孔的锐钛矿TiO2单晶,并且通过光电器件研究证实了采用该思路可进一步提高材料的光电性能。金红石TiO2在光催化全分解水方面具有独特的优势,然而关于多孔单晶金红石TiO2的研究相对较少,尤其是合成热力学不稳定的高表面能{111}晶面完全暴露的多孔金红石单晶面临较大的技术挑战因而一直未见文献报道。本文利用晶种模板法,以TiCl4溶液为含Ti前驱体、NaF为形貌控制剂、采用水热处理制备出不同比例{111}晶面的介孔金红石单晶。我们前期工作表明, NaF可作为形貌控制剂合成低表面能{110)晶面占优的介孔金红石单晶。本文发现,通过改变NaF的添加量,可有效调变{111}/{110}晶面比例,最终合成完全暴露{111}高表面能的介孔金红石TiO2单晶。扫描电镜结果显示,当添加20 mg NaF时,合成{110}占优的具有高长径比的介孔晶体;当NaF用量增加到40 mg时{110}晶面进一步缩短;至80 mg时则制备出{111})高能面完全暴露的金红石TiO2晶体。值得注意的是,对比研究表明,不采用模板合成了与多孔晶体完全相对应的不同{111}/(110}晶面比例的实心金红石晶体。透射电镜及选区电子衍射以及结合X射线衍射进一步证实,多孔的金红石TiO2晶体与实心金红石单晶均都为单晶结构,孔结构贯穿于样品内部且具有较高的晶面结晶性。氮气吸附实验发现,虽然三个不同晶面比例介孔金红石单晶样品间的形貌具有显著的差异,但比表面积非常相近(分别为24,25,28 m2/g),孔径也都为50 nm左右,该值与所用SiO2模板球的直径以及TEM观察结果相一致。光催化产氢性能结果表明,选择性的暴露活性晶面显著提高了光催化活性,仅含高能面{111}的介孔金红石单晶样品具有最高的产氢速率(约800μmol h–1 g–1),比常规{110}晶面占优的介孔单晶样品速率提高了约一倍。尤其比实心单晶样品的产氢速率提高了至少一个数量级,这应归结于介孔结构特性所导致的表面反应活性位增加、电子传输距离缩短以及光吸收增强协同作用的结果。     

碳量子点在八面双锥和纳米片TiO2上的光催化

依次用溶剂热法和水热法制备得到暴露(101)晶面的八面双锥体二氧化钛OBP-TiO2和不同碳负载量的N-CDs/OBP-TiO2复合催化剂,以及暴露(001)晶面的纳米片二氧化钛TNS和不同碳负载量的N-CDs/TNS复合催化剂。利用TEM、XRD、XPS等表征手段对这2类复合催化剂的形貌结构、化学成分等作了鉴定。系统研究了碳量子点负载量对可见光降解RhB的光催化性能影响。实验发现,由于N-CDs的加入,均能较大提高2类复合催化剂的光催化性能。(101)高裸露晶面N-CDs/OBP-TiO2比(001)高裸露晶面N-CDs/TNS的光催化活性高。     

红外驱动的动态褶皱图案:一种实现智能材料表面的有效途径

响应性表面微纳米图案可以通过外界刺激动态调控表面微纳米结构,从而实现对材料表面性能的动态调控。其中,利用材料表面不稳定性构筑褶皱是制备表面微纳米图案的通用方法,然而如何实现微纳米褶皱图案的动态调控仍然面临挑战。上海交通大学姜学松研究团队在刺激响应性高分子表面方面开展的研究工作取得了一系列阶段性成果。最近该团队提出了一种简单、普适的制备具有近红外光响应性的动态微纳米表面褶皱图案的策略,实现了对材料表面微纳米结构的多重刺激响应性调控,为构建智能材料表面开辟了新途径。     

TiO2掺杂调控聚苯乙烯微球折射率及胶体光子晶体结构色

胶体光子晶体由于其可调变的结构色在绿色印刷、印染等领域备受关注,而其光子带隙的宽度和位置由光子晶体的晶格参数(晶面间距,通常受胶体微球尺寸影响)和介质的折射率决定。现有人工胶体光子晶体主要基于SiO_2和高分子(如聚苯乙烯(PS)等)微球的组装制备,由于胶体微球材质种类有限,折射率调控受限,因而目前调控胶体光子晶体结构色主要靠改变胶体微球的尺寸来实现。本文首先制备高折射率(2.6)的TiO_2纳米晶,在乳液聚合制备单分散的PS(折射率1.6)微球过程中,将所制备的TiO_2纳米晶掺杂于PS微球中,通过TiO_2的掺杂量有效调控胶体微球的折射率,进而实现胶体光子晶体的结构色调控。以多色胶体光子晶体微球的水溶液为墨水,采用彩色喷墨打印技术打印了电脑设计的光子晶体彩画。本文发展的光子晶体结构色调控新技术拓展了胶体光子晶体的应用。     

具特定晶面且大比表面积贵金属纳米晶催化基元的构筑

贵金属纳米晶在电催化等领域具有广泛应用. 其催化活性往往与纳米晶体的表面结构直接相关,而催化剂的贵金属原子利用率与比表面积密切相关. 因小尺寸纳米晶难以保留特定的晶面,而具有特定表面的纳米晶通常结晶成尺寸较大、比表面积比较小的晶体,调控纳米晶的尺寸和表面结构两种策略似乎相互矛盾. 如何可控合成同时具有特定表面结构和大比表面积的贵金属纳米晶具有重要的意义. 本综述从形貌调控角度详细介绍提高贵金属纳米晶原子利用率的方法策略;总结调控单贵金属及其合金同时具有特定晶面和大比表面积的研究现状;最后,对纳米晶的形貌调控领域未来的发展趋势提出展望.     

Controlled synthesis and enhanced catalytic and gas-sensing properties of tin dioxide nanoparticles with exposed high-energy facets

A morphology evolution of SnO(2) nanoparticles from low-energy facets (i.e., {101} and {110}) to high-energy facets (i.e., {111}) was achieved in a basic environment. In the proposed synthetic method, octahedral SnO(2) nanoparticles enclosed by high-energy {111} facets were successfully synthesized for the first time, and tetramethylammonium hydroxide was found to be crucial for the control of exposed facets. Furthermore, our experiments demonstrated that the SnO(2) nanoparticles with exposed high-energy facets, such as {221} or {111}, exhibited enhanced catalytic activity for the oxidation of CO and enhanced gas-sensing properties due to their high chemical activity, which results from unsaturated coordination of surface atoms, superior to that of low-energy facets. These results effectively demonstrate the significance of research into improving the physical and chemical properties of materials by tailoring exposed facets of nanomaterials.     

Cu(2+)-assisted synthesis of hexoctahedral Au-Pd alloy nanocrystals with high-index facets

Controlled syntheses of multicomponent metal nanocrystals (NCs) and high-index surfaces have attracted increasing attention due to the specific physical and chemical properties of such NCs. Taking advantage of copper underpotential deposition as a bridge, hexoctahedral Au-Pd alloy NCs with {hkl} facets exposed were successfully synthesized, while phase separation occurred in the absence of Cu(2+) ions. The as-prepared hexoctahedral Au-Pd alloy NCs exhibited very excellent performance in terms of both formic acid electro-oxidation and methanol tolerance due to synergism between the high-index facets and the alloy.     

Facet-dependent antibacterial activity of Au nanocrystals

Engineered nanomaterials have attracted significantly attention as one of the most promising antimicrobial agents for against multidrug resistant infections. The toxicological responses of nanomaterials are closely related to their physicochemical properties, and establishment of a structure-activity relationship for nanomaterials at the nano-bio interface is of great significance for deep understanding antibacterial toxicity mechanisms of nanomaterials and designing safer antibacterial nanomaterials. In this study, the antibacterial behaviors of well-defined crystallographic facets of a series of Au nanocrystals, including {100}-facet cubes, {110}-facet rhombic dodecahedra, {111}-facet octahedra, {221}-facet trisoctahedra and {720}-facet concave cubes, was investigated, using the model bacteria Staphylococcus aureus. We find that Au nanocrystals display substantial facet-dependent antibacterial activities. The low-index facets of cubes, octahedra, and rhombic dodecahedra show considerable antibacterial activity, whereas the high-index facets of trisoctahedra and concave cubes remained inert under biological conditions. This result is in stark contrast to the previous paradigm that the high-index facets were considered to have higher bioactivity as compared with low-index facets. The antibacterial mechanism studies have shown that the facet-dependent antibacterial behaviors of Au nanocrystals are mainly caused by differential bacterial membrane damage as well as inhibition of cellular enzymatic activity and energy metabolism. The faceted Au nanocrystals are unique in that they do not induce generation of reactive oxygen species, as validated for most antibiotics and antimicrobial nanostructures. Our findings may provide a deeper understanding of facet-dependent toxicological responses and suggest the complexities of the nanomaterial-cell interactions, shedding some light on the development of high performance Au nanomaterials-based antibacterial therapeutics.     

Facet-dependent antibacterial activity of Au nanocrystals

Engineered nanomaterials have attracted significantly attention as one of the most promising antimicrobial agents for against multidrug resistant infections. The toxicological responses of nanomaterials are closely related to their physicochemical properties, and establishment of a structure-activity relationship for nanomaterials at the nano-bio interface is of great significance for deep understanding antibacterial toxicity mechanisms of nanomaterials and designing safer antibacterial nanomaterials. In this study, the antibacterial behaviors of well-defined crystallographic facets of a series of Au nanocrystals, including {100}-facet cubes, {110}-facet rhombic dodecahedra, {111}-facet octahedra, {221}-facet trisoctahedra and {720}-facet concave cubes, was investigated, using the model bacteria Staphylococcus aureus. We find that Au nanocrystals display substantial facet-dependent antibacterial activities. The low-index facets of cubes, octahedra, and rhombic dodecahedra show considerable antibacterial activity, whereas the high-index facets of trisoctahedra and concave cubes remained inert under biological conditions. This result is in stark contrast to the previous paradigm that the high-index facets were considered to have higher bioactivity as compared with low-index facets. The antibacterial mechanism studies have shown that the facet-dependent antibacterial behaviors of Au nanocrystals are mainly caused by differential bacterial membrane damage as well as inhibition of cellular enzymatic activity and energy metabolism. The faceted Au nanocrystals are unique in that they do not induce generation of reactive oxygen species, as validated for most antibiotics and antimicrobial nanostructures. Our findings may provide a deeper understanding of facet-dependent toxicological responses and suggest the complexities of the nanomaterial-cell interactions, shedding some light on the development of high performance Au nanomaterials-based antibacterial therapeutics.     

Heteroepitaxial growth of high-index-faceted palladium nanoshells and their catalytic performance

The development of high-performance nanocatalysts relies essentially on the generation of stable and active surface sites at the atomic scale through synthetic control of the size, shape, and chemical composition of nanoscale metals and metal oxides. One promising route is to induce the exposure of catalytically active high-index facets of nanostructures through shape-controlled syntheses. We have designed and prepared two types of Pd nanoshells that are enclosed by high-index {730} and {221} facets through heteroepitaxial growth on high-index-faceted Au nanocrystals. The turnover numbers per surface atom of the high-index-faceted Pd nanoshells have been found to be 3-7 times those of Pd and Au-Pd core-shell nanocubes that possess only {100} facets in catalyzing the Suzuki coupling reaction. These results open up a potential for the development of inexpensive and highly active metal nanocatalysts.     

一氧化碳辅助钯、铂纳米晶的形貌控制

形貌控制对调控贵金属纳米晶的催化和光学性能至关重要．近年来,在发展铂、钯纳米晶的形貌控制的方法过程中,一氧化碳（CO）不仅作为合成铂、钯纳米晶的优良还原剂,还可通过在特定晶面的选择性吸附辅助铂、钯纳米晶的形貌控制．CO辅助铂、钯纳米晶形貌控制的方法正逐步展现出独特的优越性,甚至帮助我们制备了一些目前其他方法所无法制备的纳米晶．该综述文章首先从表面科学的角度分析讨论CO分子在铂、钯单晶面上的不同吸附行为,然后总结分析了CO调控铂、钯纳米晶形貌的几个典型例子（超薄钯纳米片、介晶钯纳米花、钯四角叉／四面体以及铂纳米立方体、铂钴削角八面体）,讨论了CO在控制铂、钯纳米晶的形貌控制作用及其化学本质,最后提出CO在辅助贵金属纳米晶的形貌控制中的挑战和展望．     

Shape-Controlled Nanocrystals for Catalytic Applications

The activity, selectivity, and long-term stability of catalyst nanoparticles can be enhanced by shape modulation. Such shaped catalytic nanocrystals have well-defined surface crystalline structures on which the cleavage and recombination of chemical bonds can be rationally controlled. Metal and metal oxide nanocrystals have been synthesized in various shapes using wet chemistry techniques such as reducing metal precursors in the presence of the surface-capping agents. The surface-capping agents should be removed prior to the catalytic chemical reaction, which necessitates clean catalytically active surface. The removal process should be performed very carefully because this removal often causes shape deformation. A few examples in which the surface-capping agents contribute positively to the chemical reactions have been reported. The examples described in this review include shaped metal, metal composite, and metal oxide nanocrystals that show enhanced catalytic activity, selectivity, and long-term stability for various gas-phase, liquid-phase, or electrocatalytic reactions. Although most of the studies using these shaped nanocrystals for catalytic applications have focused on low-index surfaces, nanocrystals with high-index facets and their catalytic applications have recently been reported. By bridging surface studies with nanoparticle catalysts using shape modulation, catalysts with improved properties can be rationally designed.     

Synthesis of polyhedral iron oxide nanocrystals bound by high-index facets

High surface energy of high-index facets endows nanocrystals with high activities and thus promotes potential applications such as highly efficient catalysts,special optical,electrical and magnetic devices.But the high surface energy of the high-index facets usually drives them to grow faster than the other facets and finally disappear during the crystal growth,which leads the synthesis of nanocrystals with high-indexed facets exposed to be a great challenge.Herein,we introduced two routes to control the synthesis of-Fe2O3polyhedrons with different sets of high-index facets,one using different metal ions(Ni2+,Cu2+or Zn2+)as structure-directing agents and the other applying polymer surfactant sodium carboxymethyl cellulose(CMC)as additive.The growth process of high-index-Fe2O3polyhedrons was also discussed and possible growth mechanism was proposed.