THE EFFECT OF SLNGLE AND MIXED MICELLES OF SURFACTANTS ON POLYMERIZATION OF ACRYLAMIDE

Acrylamide is conveniendy polymerized in aqueous solution lo a water soluble polymer. The measurements of kinetic parameters of polymerization of acrylamide, in aqueous and micellar solution, have been earned out by conduction calorimeter. The polymerization is initiated by sodium sulfite and sulfite-persulfate redox system. The effect of initiator and monomer concentration as well as temperature and surfactants on polymerization rale constant has been investigated. The analog thermogram method has been employed to calculate the rate constants. The activation energy is calculated from Arrhenius relationship and molecular weights are determined by viscometry. Rate equations have been derived and reaction mechanism hove been suggested. The rate of reaction is found to increase with temperature and monomer concentration.     

热动力学对比进度法(Ⅲ)——2-Ⅰ型可逆反应的热动力学研究

本文建立了2-Ⅰ型可逆反应的热动力学对比进度方程和热动力学模型。用热导式自动热量计研究了一个2-Ⅰ型吸热反应体系,并对结果进行了讨论。     

Fitting isoperibolic calorimeter data for reactions with pseudo-first order chemical kinetics

The non-linear least squares fitting of the chemical heat flow and the reactor temperature are compared for reactions with pseudo-first order chemical kinetics carried out in an isoperibolic calorimeter operating quasi-isothermally. Both methods give very similar results for the reaction rate constant and enthalpy of reaction but fitting the reactor temperature appears to have some advantages especially when there is an enthalpy of mixing of the reagents.     

Thermokinetic Research Method for Faster First-order Reaction. Double-parameter method

This paper presents a novel data processing method for thermokinetics of faster first-order reaction on the basis of the double-parameter theoretical model of a conduction calorimeter, in which the rate constant of a first-order reaction can be calculated from only four peak height data from the same thermoanalytical curve without using any peak-area. The saponifications of ethyl acetate and methyl acetate in aqueous solution and ethyl benzoate in aqueous alcohol have been studied to test the validity of this method. The rate constants calculated with this method are in fair agreement with those in literature; hence the validity of this method is demonstrated. This revised version was published online in August 2006 with corrections to the Cover Date.     

Gas-phase Boudouard disproportionation reaction between highly vibrationally excited CO molecules

The gas-phase Boudouard disproportionation reaction between two highly vibrationally excited CO molecules in the ground electronic state has been studied in optically pumped CO. The gas temperature and the CO vibrational level populations in the reaction region, as well as the CO₂ concentration in the reaction products have been measured using FTIR emission and absorption spectroscopy. The results demonstrate that CO₂ formation in the optically pumped reactor is controlled by the high CO vibrational level populations, rather than by CO partial pressure or by flow temperature. The disproportionation reaction rate constant has been determined from the measured CO₂ and CO concentrations using the perfectly stirred reactor (PSR) approximation. The reaction activation energy, 11.6 ± 0.3 eV (close to the CO dissociation energy of 11.09 eV), was evaluated using the statistical transition state theory, by comparing the dependence of the measured CO₂ concentration and of the calculated reaction rate constant on helium partial pressure. The disproportionation reaction rate constant measured at the present conditions is k_f = (9 ± 4) × 10⁻¹⁸ cm³/s. The reaction rate constants obtained from the experimental measurements and from the transition state theory are in good agreement.     

热动力学的研究 Ⅲ. 正脂肪酸乙酯皂化反应的热动力学

根据热动力学的基础理论, 应用一级反应的无量纲参数法, 在20和30 ℃下测定了乙酸乙酯、丙酸乙酯和丁酸乙酯在乙醇-水混合溶剂中皂化反应速度常数, 并计算了它们的活化能, 结果在误差范围内与文献值相符合。还计算了这三个反应体系的活化自由能。本文讨论了反应物初始浓度和反应的速度常数与量热计冷却常数的关系。     

热动力学对比参量法 --简单级数反应

根据化学反应动力学和热动力学基本理论, 建立了简单级数反应的热动力学对比参量方程, 提出了一种新的热动力学研究法--对比参量法. 利用该法可以从一张热谱图上同时解析出化学反应的速率常数、半衰期和热动力学体系的冷却常数. 实验结果验证了方法的正确性.     

室温CO催化氧化反应动力学的研究

本文采用无梯度反应器,考察了纳米金催化剂以及其它商品化的催化CO氧化催化剂,在不同CO浓度下催化CO氧化反应的转化率和反应速率,证明在CO初始浓度从ppm到pct数量级范围内,纳米金催化剂具有最好的催化CO室温转化的能力.     

Evaluation of a biological aneroid microbomb calorimeter with calcium carbide

A robust, inexpensive commercial microbomb combustion calorimeter, which has previously only been used with biological samples, has been evaluated for applications involving inorganic materials. The calorimeter has been calibrated extensively using N.P.L. standardised benzoic acid, and has been evaluated with calcium carbide. Measurements on the combustion of calcium carbide were made using the carbide alone, and using benzoic acid, graphite and calcium as addition agents. The calorimeter is shown to have an uncertainty of ±1.3% (2 × standard deviation of mean) in calibration. The measurements on the combustion of calcium carbide have a total uncertainty of the order of ±7% (2 × standard deviation of mean), which is shown to be too large to permit any significant determination of the enthalpy of formation of the carbide. The potential applications of this calorimeter are outlined.     

N-溴代丁二酰亚胺氧化异丙醇反应的热动力学研究

利用Batch型热导式热量计测定了N-溴代丁二酰亚胺(NBS)氧化异丙醇反应的热谱曲线,并分别利用简单级数反应和连续一级反应热动力学特征对比参量法的数学模型计算了反应的动力学参数,计算结果表明:利用连续一级反应热动力学研究法处理得到的动力学参数与文献通过碘量法的测定值是吻合的,因此,在质子性溶剂中的NBS氧化异丙醇反应遵从连续一级反应的动力学规律。     

热动力学的研究 X. 一级反应的热谱峰高法

本文根据一级反应的热谱曲线方程、建立了速度常数的一种新算法。这种新方法,只需要热谱曲线在各个特征时刻的峰高,而不需要任何峰面积,即可算得反应体系的无量纲参数和速度常数,称为一级反应的热谱峰高法。     

较快一级化学反应的热动力学研究法: 热弛豫法

分析了非稳态传热情况下热导式热量计的动态性能,通过对输出信号的剖析,建立了热导式热量计冷却常数的经验动态模型。通过对热弛豫现象的分析,建立了可用于研究快速化学反应的热动力学研究法-热弛豫法,应用此种量热研究法可用于研究速率常数小于5s^-^1的一级化学反应。研究了25℃下乙酸甲酯、甲酸乙酯和甲酸甲酯在水溶液中的皂化反应,其计算结果与文献值相吻合,从而验证了热弛豫法的正确性。     

Curing reaction of biphenyl epoxy resin with different phenolic functional hardeners

The investigation of cure kinetics and relationships between glass transition temperature and conversion of biphenyl epoxy resin (4,4′-diglycidyloxy-3,3′,5,5′-tetramethyl biphenyl) with different phenolic hardeners was performed by differential scanning calorimeter using an isothermal approach over the temperature range 120–150°C. All kinetic parameters of the curing reaction including the reaction order, activation energy, and rate constant were calculated and reported. The results indicate that the curing reaction of formulations using xylok and dicyclopentadiene type phenolic resins (DCPDP) as hardeners proceeds through a first-order kinetic mechanism, whereas the curing reaction of formulations using phenol novolac as a hardener goes through an autocatalytic kinetic mechanism. The differences of curing reaction with the change of hardener in biphenyl epoxy resin systems were explained with the relationships between T_g and reaction conversion using the DiBenedetto equation. A detailed cure mechanism in biphenyl-type epoxy resin with the different hardeners has been suggested. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 773–783, 1998     

模拟热谱曲线法(Ⅱ)──不可逆连串-级反应的热动力学研究

研究连串反应的动力学有十分重要的意义,文献［1,2]建立了两种连串一级反应的热动力学研究法．我们在前文[1]的基础上,建立了模拟热谱曲线法．该法可以直接从热导式量热计的热谱曲线上解析出连串一级反应中两步反应的速率常数．应用该法测定了邻苯二甲酸二乙酯和丁二酸...     

热导式热量计冷却常数的化学标定法

热导式热量计是热力学研究的重要工具,其量热体系之仪器常数的标定目前所广泛采用的方法是电能标定法,有时也采用化学标定法．前者简单、方便,能满足热静力学与热动力学研究中的需要,但电能标定所得仪器常数与化学反应时的仪器常数不一定完全相同［１］,特别是有些热...     

A new reaction calorimeter and calorimetric tools for safety testing at laboratory scale

Calorimetry combined with thermal analysis is an essential tool for the evaluation of thermal risks linked with chemical reactions at industrial scale. The energies of synthesis reactions or decomposition reactions as well as the heat capacities of reaction masses can be measured using such techniques. The capacity of the SETARAM differential reaction calorimeter (DRC) to determine essential safety data has been demonstrated with the measurement of heat capacities of cyclohexane and propanoic acid. Results of an industrial reaction are also presented.     

Studies of thermokinetics in an adiabatic calorimeter

Thermokinetic research methods for irreversible and reversible reactions in the adiabatic calorimeter are proposed. Four reaction systems, including an endothermic reaction, have been studied with an adiabatic calorimeter and the validity of these methods is verified.     

On-line reaction calorimetry optimization of safety parameters

When chemical reactions are performed in semi-batch mode and the reaction rate is relatively low, the reactant added may be accumulated. The resulting thermal accumulation is of major concern regarding process safety, as a fault in the cooling system may lead to a run-away reaction. The feed rate in semi-batch processes is usually constant, but this paper discusses methods of optimizing the feed rate interactively, based on the measured heat flow and the calculated amount of compound that has actually reacted. The prerequisite of such procedures is to run the experiments in a reaction calorimeter in which the heat flows can be measured accurately and continuously. For this purpose a ChemiSens reaction calorimeter CPA202, which is calibration free and gives stable, flat ‘zero-line-type’ baselines, was employed.     

速率常数-秩分析法在化学反应过程分析中的应用

针对化学反应动力学谱-吸收光谱组成的两维数据,提出了以优化速率常数而消去反应物波谱信息为减秩手段的速率常数-秩分析法(RCRA).结果表明,RCRA在一次优化过程中可同时获得两个最优解,分别对应于两步速率常数.在获得动力学参数的前提下,利用最小二乘回归可解出包括中间体在内的各组分的吸收光谱.该方法用于处理苯胺电解降解的两维数据,发现苯胺降解过程中有一种表观中间体存在,降解过程符合一级连串反应模型.