碳纳米管负载Cu-Co复合氧化物的富氢气氛中CO催化消除

采用超声处理辅助浸渍法制备了多壁碳纳米管负载的Cu-Co复合氧化物催化剂. 利用XRD、TEM、H₂-TPR、XPS和Raman光谱等表征了催化剂的结构性质. 在Cu和Co氧化物以及金属氧化物与碳纳米管载体间存在强相互作用. 催化剂在富氢气氛中CO催化消除反应中,与单一Cu或Co催化剂相比,Cu-Co复合氧化物催化剂表现出独特的反应特性,特别是在较高反应温度下可同时结合CO优先氧化和CO甲烷化的反应途径来实现高效CO消除. 当Cu/Co比为1/8时活性最优,可以实现在150～250 o和高反应空速 (120 L/(h·g))富氢气氛中CO的完全消除.     

海胆状CoCu双金属纳米复合材料的合成及其在甘油氢解制丙二醇中的催化性能

以Ru为多相成核剂和硬脂酸为表面活性剂,在多元醇溶液中合成了CoCu双金属纳米复合物,并在甘油选择性氢解制丙二醇中评价了其催化性能．结果表明,硬脂酸作为结构导向剂可诱使Co纳米晶沿着一维方向生长,形成纳米线．当Co²⁺和Cu²⁺共存于多元醇溶液中,由于Cu²⁺较高的氧化还原电位,首先被还原成Cu⁰,进而增长成100～300 nm的球形粒子．在Cu粒子表面,Co²⁺被还原成核,在表面活性剂的结构导向作用下生长为长度为100～500 nm的纳米棒,从而形成海胆状CoCu双金属纳米复合结构．在甘油选择性氢解制丙二醇反应中,海胆状CoCu双金属复合催化剂的单位表面活性与丙二醇选择性均明显高于单金属Co纳米线和Cu球形粒子,在Co₉₀Cu₁₀催化剂上获得33%的丙二醇收率．这可能是由于Co和Cu界面的协同效应促进了甘油的转化所致．     

Formation of single-wall carbon nanohorn aggregates hybridized with carbon nanocapsules by laser vaporization

Single-wall carbon nanohorn (SWNH) aggregates hybridized with carbon nanocapsules (CNCs) were fabricated at a high yield (∼70%). The carbon was laser-vaporized for 2 s into an Ar gas atmosphere with one of the following: Fe, Al, Si, Co, Ni, Cu, Ag, La₂O₃, Y₂O₃, and G₂O₃. By optimizing the Ar gas pressure and metal content, we were able to produce hybridized SWNH structures for Fe, Co, Ni, Cu, and Ag. Possible mechanisms for governing hybrid production, which occurs with smaller CNCs (<100 nm) with only certain metals and carbide, are discussed on the basis of thermal and catalytic graphitization. PACS 61.46.Df; 68.37.Lp; 81.16.Mk     

Effects of controlling Cu spacer inter-diffusion by diffusion barriers on the magnetic and electrical stability of GMR spin-valve devices

An ultra-thin Co or CoFe diffusion barrier inserted at the NiFe/Cu interfaces was revealed to effectively control the electrical and magnetic stability of NiFe/Cu/NiFe-based giant magnetoresistance (GMR) spin-valve spintronics devices (SVSDs) operating at high current density. It was found that the activation energy, E_a, related to the electromigration (EM)-induced inter-diffusion process for the patterned NiFe(3)/Cu(2)/NiFe(3 nm) magnetic multi-layered devices (MMLD) was remarkably increased from 0.52±0.2 eV to 1.17±0.16 eV after the insertion of an ultra-thin Co diffusion barrier at the NiFe/Cu interfaces. The dramatically reduced “current shunting paths” from the Cu spacer to the NiFe thin films and the development of “self-healing process” resulted from the effectively restrained Cu inter-diffusion (intermixing with Ni atoms) due to the diffusion barriers were found to be primarily responsible for the improvement of electrical and magnetic stability. The further investigation on the effects of controlling Cu spacer inter-diffusion by diffusion barriers on the EM and thermomigration (TM)-induced magnetic degradation was carried out for the NiFe/(Co or Co₉₀Fe₁₀)/Cu/(Co or Co₉₀Fe₁₀)/NiFe/FeMn top exchange-biased GMR (EBGMR) SVSDs electrically stressed under the applied DC current density of J=2.5×10⁷ A/cm² (I=16.5∼17.25 mA). It was clearly confirmed that the Co and the CoFe diffusion barriers effectively control the Cu spacer inter-diffusion resulting in a smaller reduction in both GMR ratio and exchange bias field of the EBGMR SVSDs. Furthermore, it was obviously observed that the effects of CoFe diffusion barrier on controlling the Cu spacer inter-diffusion are more significant than that of Co. The effectively reduced Mn atomic inter-diffusion at the NiFe/FeMn interface and the well-maintained interfacial spin-dependent scattering resulted from the control of EM and TM-induced Cu spacer inter-diffusion were the main physical reasons for the significant improvement of magnetic and electrical degradation of top EBGMR SVSDs.     

YBa2(Cu0.95M0.05)3O7-δ的代换效应及其中子衍射研究

X射线衍射实验表明YBa₂(Cu_0.95M_0.05)₃O_7-δ(M=Ti,V,Cr,Mn,Fe,Co,Ni,Cu和Zn)均为单相结构。Fe,Co,Ni和Zn对Cu的替代使超导临界温度T_c显著下降,而同样含量的Ti,V,Cr,Mn对Cu的替代并未对超导性能产生显著影响。并利用中子衍射分析了Ti,Mn,Fe和Co对Cu原子的取代,发现代换原子对Cu的两个晶位各自存在不同的择优占据 关键词：     

The scattering of light on sound waves in the hypersonic range of frequencies the directional sensitivity of Brillouin light scattering

Brillouin spectroscopy of acoustic phonons in transparent crystals and nontransparent metallic Co/Cu superlattices is reviewed. The method presents a directional sensitivity of the experiment. This feature is useful in elastic constants measurements in crystals and analysis of in-plane anisotropies of hyper-sound and spin waves in superlattices. Results for the LiTaO₃, LiNbO₃, LiNbO₃:Cu, SLGO, SLAO crystals are provided. Spin wave results for the Co/Cu superlattices are presented.     

Antiferromagnetic coupling between Co/Ni multilayers with perpendicular magnetization across MBE-grown Cu(111) layers

A cleat oscillatory exchange coupling has been observed for an epitaxial (111) M₁/Cu/M₂ structure, grown by Molecular Beam Epitaxy (MBE) on a single crystal Cu(111) substrate. The magnetic layers M₁ and M₂ were designed to have perpendicular easy axis by using Co/Ni multilayers. The Cu layer was deposited in the form of a wedge. The magneto-optically measured hysteresis loops show, in the case of antiferromagnetic (AF) coupling, clear first-order spin-flip transitions between the saturated and antiparallel states. Signatures of a ferromagnetic or biquadratic component, observed earlier in loops of an AF coupled Co/Cu/Co(111) sandwich, were absent in the present loops. The absence of these signatures is believed to be a consequence of the relatively strong (perpendicular) uniaxial anisotropy of the present samples.     

Scattering effects of primary electrons in Co/Cu(1 1 1) measured by Auger; elastic and loss electrons

Electron energy losses were measured as a function of the incidence angle of the primary electron beam for the Co/Cu(1 1 1) adsorption system. The measurements performed for the clean and covered substrate reveal characteristic intensity maxima associated with the close packed rows of atoms, as it was observed in the so called directional Auger and directional elastic peak electron spectroscopy profiles. The incidence angle dependent signal of electron energy losses measured for the clean (Cu 3p_3/2) and covered (Co 3p_3/2) substrate gives the so called directional electron energy loss spectroscopy (DEELS) profiles which contain structural as well as chemical information. The scattering of primaries and different emission processes associated with electron energy losses, Auger, and elastically backscattered electrons are discussed. A change in the h_Cu (Cu M_2,3VV transition) Auger signal recorded during the continuous cobalt deposition shows that the growth mode is not a pure layer by layer type. The complete covering of the substrate by Co at higher coverages is confirmed by the comparison between experimental and theoretical ratios of the Auger peak heights.     

Effect of substitution elements on magnetization of monodispersed MFe2O4 particles

The monodispersed hydrophilic magnetic fluids with nanometric M_xFe_3−xO₄ (M = Cu, Co, Ca and Ni) particles were prepared by sonochemical method. The substituted M amounts were analyzed with different x values by ICP-AES quantitatively. The excellent substitutability and magnetic property for Co, Ni was observed compared to those for Cu and Ca relatively. In particular, the applicability of Co was confirmed for novel radiotherapy.     

Coercivity mechanism of Sm(Co, Cu)5

The mechanism of the high intrinsic coercivity of the Sm(Co_1−xCu_x)₅ (0≦x<1) system was studied by relating the coherency between the lattice constants of hexagonal Sm(Co, Cu)₅ and hcp Co to the coercive force. It was found analytically that the intrinsic coercive force reaches a maximum in the composition range from x=0.6 to 0.8, where the lattice mismatch approaches zero, so that there is a strong correlation between lattice matching and coercive force. When a Sm ion was located within a Sm(Co, Cu)₅ grain and in the outmost edge of the a and c planes of its grain surrounded or not surrounded by the coherent Co phase, the crystal field parameter at each Sm³⁺ site was calculated using a point charge model under the assumption that the Co and Cu atoms located in a grain and the hcp Co atoms situated at the interface uniformly have a charge of 3/5−. The results indicated that the Co phase precipitated coherently along the grain boundaries effectively enhances the magnetocrystalline anisotropy of Sm ions located in the outmost edges of the a and c planes of a Sm(Co, Cu)₅ grain.     

Spin-valve magnetoresistive structures based on Co/Tb multilayer films

The effect of the layer thickness on the magnetic properties of {Co/Tb}_n, {Co/Tb}_n/Co, and {Co/Tb}_n/Co/Cu/Co multilayer films is studied. The dependence of the hysteresis and magnetoresistive properties of {Co(1 nm)/Tb(1 nm)}_n/Co(5 nm)/Cu(L _Cu)/Co(5 nm) structures on the thickness of the {Co/Tb}_n layer and copper spacing are obtained. The feasibility of spin-valve structures based on {Co/Tb}_n multilayer films with in-plane anisotropy is demonstrated.     

Effect of spin contamination error on surface catalytic reaction: NO reduction by core-shell catalysts

ABSTRACT

The effects of spin contamination errors on the activation barriers of catalytic NO reduction by TiO₂/Ag and ZrO₂/Cu core-shell catalyst models were investigated using an approximate spin projection method and an unrestricted density functional theory calculation with the plane-wave basis set. The estimated barrier of the TiO₂/Ag system increased (0.03?eV), whereas that of the ZrO₂/Cu system decreased (0.04?eV) after the correction of the spin contamination error. This difference in the estimated barriers of the two systems can be attributed to the difference in their surface structures. The error obtained for the TiO₂/Ag system was larger than that obtained for the gas phase, i.e. the spin contamination error was induced by the molecule/surface interaction. Moreover, the error correction also changed the rate-determining step of ZrO₂/Cu. These results demonstrate the importance of the correction of spin contamination errors for the detailed investigation of catalytic reactions.     

Selective removal and patterning of a Co/Cu/Co trilayer created by femtosecond laser processing

The selective removal and patterning of a typical pseudo-spin-valve structure, consisting of a Co(20 nm)/ Cu(6 nm)/Co(3 nm) trilayer, by femtosecond laser has been examined in terms of irradiation parameters and layer structure. Ablation thresholds of the individual Co and Cu thin films and the SiO₂/Si substrate have been measured for single-shot irradiation with a 200 femtosecond (fs) laser pulses of a Ti:sapphire laser operating at 775 nm. Ablation of the entire trilayer structure was characterized by a sequential removal of the layers at a threshold level of fluence of 0.28 J/cm². Atomic Force Microscopy, optical microscopy, profilometry and Sputtered Neutral Mass Spectroscopy were employed to characterize the laser-induced single-shot laser selective removal and patterned areas. As a result, two phenomena were found to characterize the laser process: (i) selective removal of the Co and Cu layer due to the change of the laser fluence and (ii) regular pillars’ area of Co/Cu/Co could be achieved in a regular manner with the lowest pillar width size of 1.5 μm. Ablation through the layers was accompanied by the formation of bulges at the edges of the pillars, which was the biggest inconvenience in lowering the pillar size through the femtosecond laser process.     

Spin-pumping-enhanced magnetic damping in ultrathin Cu(0 0 1)/Co/Cu and Cu(0 0 1)/Ni/Cu films

The influence of the Cu capping layer thickness on the spin pumping effect in ultrathin epitaxial Co and Ni films on Cu(0 0 1) was investigated by in situ ultrahigh vacuum ferromagnetic resonance. A pronounced increase in the linewidth is observed at the onset of spin pumping for capping layer thicknesses d_Cu larger than 5 ML, saturating at d_Cu = 20 ML for both systems. The spin mixing conductance for Co/Cu and Ni/Cu interfaces was evaluated.     

Phase separation and rapid solidification of liquid Cu<Subscript>60</Subscript>Fe<Subscript>30</Subscript>Co<Subscript>10</Subscript> ternary peritectic alloy

The metastable liquid phase separation and rapid solidification of Cu₆₀Fe₃₀Co₁₀ ternary peritectic alloy were investigated by using the drop tube technique and the differential scanning calorimetry method. It was found that the critical temperature of metastable liquid phase separation in this alloy is 1623.5 K, and the two separated liquid phases solidify as Cu(Fe,Co) and Fe(Cu,Co) solid solutions, respectively. The undercooling and cooling rate of droplets processed in the drop tube increase with the decrease of their diameters. During the drop tube processing, the structural morphologies of undercooled droplets are strongly dependent on the cooling rate. With the increase of the cooling rate, Fe(Cu,Co) spheres are refined greatly and become uniformly dispersed in the Cu-rich matrix. The calculations of Marangoni migration velocity (V _M) and Stokes motion velocity (V _S) of Fe(Cu,Co) droplets indicated that Marangoni migration contributes more to the coarsening and congregation of the minor phase during free fall. At the same undercooling, the V _M/V _S ratio increases drastically as Fe(Cu,Co) droplet size decreases. On the other hand, a larger undercooling tends to increase the V _M/V _S value for Fe(Cu,Co) droplets with the same size. Supported by the National Natural Science Foundation of China (Grant Nos. 50121101 and 50395105) and the Scientific and Technological Creative Foundation of Youth in Northwestern Polytechnical University of China (Grant No. W016223)     

Orbital moments of 3d adatoms and Co nanostructures on Cu(0 0 1) surfaces

We use ab initio calculations to investigate spin and orbital moments of 3d transition-metal adatoms and Co nanostructures on Cu(0 0 1) surfaces. For Fe and Co adatoms on Cu(0 0 1) we predict extremely large orbital moments, comparable to the spin moments at these sites. For Mn and Cr adatoms the orbital moments are extremely small and can be neglected in face of their rather large spin moments. Ni adatoms on Cu(0 0 1) were found to be non-magnetic. Our investigations for adsorbed flat clusters of Co on Cu(0 0 1) address the persistence and extent of these large orbital moments in the clusters as a function of their size. We find that, the average orbital moment (M_orb) per Co atom is strongly correlated with the coordination number, decreasing drastically and monotonically as the average number of first Co neighbors around the sites in the cluster (N_Co) is increased.     

煅烧温度对Cu/HMOR催化剂结构及其催化二甲醚羰基化反应性能影响

采用离子交换法在不同煅烧温度下制备HMOR负载Cu(Cu/HMOR)催化剂,用于催化二甲醚(DME)羰基化合成乙酸甲酯(MA)反应. 活性测试结果表明430 oC煅烧制得Cu/HMOR具有较好催化活性,在210 oC、1.5 MPa、空速4883 h^-1下DME转化率为97.2%,MA选择性为97.9%. 对催化剂进行X射线衍射、N₂物理吸附、NH₃程序升温脱附、CO程序升温脱附及拉曼方法表征. 催化剂经一定的煅烧温度有利于Cu离子迁移及扩散和硝酸铜完全分解,从而使HMOR载体具有较多的酸性活性位、大比表面、适宜的微孔结构以及更多的CO吸附位.     

DOMAIN STRUCTURES AND ANISOTROPY IN Pt1-xCux/Co MULTILAYER THIN FILMS

The domain structures of Pt_1-xCu_x/Co multilayer films in as-grown and remanent states have been investigated by using magnetic force microscope. The magnetic domain patterns are strongly influenced by the Cu concentration. For pure Pt/Co multilayer in as-grown state, its domain pattern is depicted as island-like one; however, with the Cu doped in Pt spacer layers, the doman patterns become dot-like, but the island-like domain pattern appears again for the Cu concentration of 14 at%. The domain patterns variation can be attributed to the change of effective perpendicular anisotropy K_ueff due to the effect of Cu atom doped in the Pt spacer layers. Besides, the domain structures of Pt/Co multilayer films in remanent state after the application of various perpendicular magnetic fields have also been studied.     

Cu/HMOR催化二甲醚羰基化合成乙酸甲酯: 催化剂制备方法的影响 (cited: 2)

采用氨蒸发法、尿素水解法、离子交换法及浸渍法制备HMOR负载的Cu催化剂, 考察其催化二甲醚(DME)羰基化合成乙酸甲酯(MA)性能. 结果表明离子交换法制得Cu/HMOR催化剂在Cu的金属中心和酸性分子筛载体的共同作用下具有较好催化反应活性. 在210 oC、1.5 MPa、空速4883 h^-1,DME转化率为95.3%,MA选择性为94.9%. 对催化剂进行N2物理吸附、X射线衍射、NH₃程序升温脱附和CO程序升温脱附等表征发现,离子交换法制得Cu/HMOR催化剂具有较高比表面、大量弱酸及一定中强酸、适中的CO吸附强度,提高了CO插入DME羰基化反应活性.     

Fabrication and characterization of a Cu seed layer on a 60-nm trench-patterned SiO2 substrate by a self-assembled-monolayer (SAM) process

Continuous electroless deposition of a 10-nm thick layer of Cu was successfully performed on a SiO₂/Si substrate coated with a 3-nm Au catalytic layer. The Au catalytic layer was formed by a self-assembled monolayer (SAM) process terminated with NH₂ headgroups, upon which negatively charged Au particles were deposited via electrostatic interaction with the positively charged NH₂-SAM. The Au and NH₂-SAM layers were analyzed by X-ray photoelectron spectroscopy (XPS) and contact angle analysis. Atomic force microscopy, field emission scanning electron microscopy, and XPS revealed that the Cu layer formed by this electroless processes had good step-coverage, small grain size, and excellent adhesion to the substrate. The proposed process is a very promising method for fabrication of a conductive Cu seed layer in a 60-nm trench-pattern.