A N NMR study of tautomerism in dimethyl dihydro-1,2,4,5-tetrazine-3,6-dicarboxylate

Dimethyl dihydro-1,2,4,5-tetrazine-3,6-dicarboxylate can exist either in 1,2- or 1,4-dihydro tautomeric forms. The ¹⁵N NMR spectra of dimethyl dihydro-1,2,4,5-tetrazine-3,6-dicarboxylate were measured at the ¹⁵N natural abundance level as well as in ¹⁵N doubly labelled selectively and in ¹⁵N completely labelled compounds (20% ¹⁵N). The J(¹⁵N,¹⁵N) value was determined in ¹⁵N completely labelled compounds (20% ¹⁵N) using 1D ¹⁵N INADEQUATE and was found to be 12.2 ± 0.2 Hz in deuteriochloroform, acetonitrile-d₃, DMSO-d₆ and CD₃OH. Very similar ¹⁵N chemical shifts and ¹J(¹⁵N,¹H) values were also observed in all the solvents. This indicates that compound 1 exists completely in the 1,4-dihydro tautomeric form (i.e., as dimethyl 1,4-dihydro-1,2,4,5-tetrazine-3,6-dicarboxylate) in all the solvents tested.     

Synthesis of 9-substituted tetrahydrodiazepinopurines—asmarine A analogues

Asmarines are marine alkaloids, with a unique tetrahydro[1,4]diazepino-[1,2,3-g,h]purine (THDAP) structure and interesting biological properties. Three synthetic approaches were employed for the preparation of the THDAP system. Several N-9, of the purine, protecting groups were investigated. ¹⁵N-Chemical shifts measured from ¹⁵NH HMBC experiments for several compounds, that demonstrate the influence of various structural features on the ¹⁵N-resonances are reported.     

A squaraine-based chemosensor for Hg and Pb

A novel unsymmetrical cationic squaraine dye (USqH⁺), absorbing in the near-infrared region (600-850 nm), was synthesized by reacting a semi-squaric acid derivative 3-[4-(N,N-dioctylamino)phenyl]-4-hydroxycyclobutene-1,2-dione with the squarylium dye, bis(3-methylbenzothiazol-2-ylidene)squaraine. Addition of micromolar amounts of Hg²⁺ and Pb²⁺ to solutions of USqH⁺ in dichloromethane brings about significant changes in its absorption spectrum, resulting in a change in colour of the solution from green to pink. The absorption spectrum of the dye is relatively insensitive to other environmentally relevant metal ions, making it possible to visually detect Hg²⁺ and Pb²⁺ in the presence of other metal ions. Molecular modeling of the complexes at the density functional theory (DFT) and semiempirical PM3 levels strongly suggests that the oxygen atoms are the most likely choice for cation binding. The calculations also indicate a high affinity of Hg²⁺ and Pb²⁺ toward the formation of 2:1 complexes, which is in good agreement with the experimental results.     

A highly selective pyrene based fluorescent sensor toward Hg detection

A new pyrene-containing fluorescent sensor has been synthesized from 2,3,3-trimethylindolenine. Spectroscopic and photophysical properties of sensor are presented. The large change in fluorescence intensity (I/I₀ = 0.13) at 381 nm and affinity to Hg²⁺ over other cations such as K⁺, Na⁺, Ca²⁺, Mg²⁺, Pb²⁺, and Cu²⁺ make this compound a useful chemosensor for Hg²⁺ detection in hydrophilic media. The sensor (6.0 × 10⁻⁶ M) displays significant fluorescence quenching upon addition of Hg²⁺ in pH 7.4 HEPES buffer without excimer formation. Job’s plot analysis shows the binding stoichiometry to be 2:1 (host/guest).     

Cribrarione A, a new antimicrobial naphthoquinone pigment from a myxomycete Cribraria purpurea

Cribrarione A (1), a new dihydrofuranonaphthoquinone pigment with antimicrobial activity against Bacillus subtilis has been isolated from a myxomycete Cribraria purpurea and its structure was elucidated by spectral data. The ¹H-¹³C long-range couplings through an intramolecular hydrogen bond were clearly observed in the HMBC spectrum of 1.     

A set of triple-resonance nuclear magnetic resonance experiments for structural characterization of organophosphorus compounds in mixture samples

The ¹H, ¹³C correlation NMR spectroscopy utilizes J_CH couplings in molecules, and provides important structural information from small organic molecules in the form of carbon chemical shifts and carbon-proton connectivities. The full potential of the ¹H, ¹³C correlation NMR spectroscopy has not been realized in the Chemical Weapons Convention (CWC) related verification analyses due to the sample matrix, which usually contains a high amount of non-related compounds obscuring the correlations of the relevant compounds. Here, the results of the application of ¹H, ¹³C, ³¹P triple-resonance NMR spectroscopy in characterization of OP compounds related to the CWC are presented. With a set of two-dimensional triple-resonance experiments the J_HP, J_CH and J_PC couplings are utilized to map the connectivities of the atoms in OP compounds and to extract the carbon chemical shift information. With the use of the proposed pulse sequences the correlations from the OP compounds can be recorded without significant artifacts from the non-OP compound impurities in the sample. Further selectivity of the observed correlations is achieved with the application of phosphorus band-selective pulse in the pulse sequences to assist the analysis of multiple OP compounds in mixture samples. The use of the triple-resonance experiments in the analysis of a complex sample is shown with a test mixture containing typical scheduled OP compounds, including the characteristic degradation products of nerve agents sarin, soman, and VX. The viability of the approach in verification analysis is demonstrated in the analysis of the 30th OPCW Proficiency Test sample.     

A label-free and signal-on supersandwich fluorescent platform for Hg sensing

A label-free supersandwich fluorescent assay was demonstrated for the first time by taking Hg²⁺ as a detection candidate. The principle of the proposed supersandwich fluorescent platform is based on the formation of supersandwich structure by T-Hg²⁺-T coordination and the fluorescence enhancement of the intercalated Genefinder (GF) in double strand DNA (dsDNA). Such supersandwich fluorescent DNA sensor exhibits a linear range of 10–300 nM for the detection of Hg²⁺, with a detection limit of 2.5 nM on the basis of the 3σ/slope (σ represents the standard deviation of the blank samples), which is well below the permit of the U.S. Environmental Protection Agency (<10 nM). The detection can be fulfilled in less than 10 min. The proposed mix-and-detect fluorescent platform exhibits excellent sensitivity, selectivity, and convenient manipulation. The assay was successfully used to detect Hg²⁺ in the lake water samples, which suggested its potential in practical samples.     

Biomimetic sensor based on MnMn complex as manganese peroxidase mimetic for determination of rutin

A novel biomimetic sensor for rutin determination based on a dinuclear complex [Mn^IIIMn^II(Ldtb)(μ-OAc)₂]BPh₄ containing an unsymmetrical dinucleating ligand, 2-[N,N-bis(2-pyridylmethyl)-aminomethyl]-6-[N-(3,5-di-tert-butyl-2-oxidoben-zyl)-N-(2-pyridylamino)aminomethyl]-4-methylphenol (H₂Ldtb), as a manganese peroxidase mimetic was developed. Several parameters were investigated to evaluate the performance of the biomimetic sensor obtained after the incorporation of the dinuclear complex in a carbon paste. The best performance was obtained in 75:15:10% (w/w/w) of the graphite powder:Nujol:Mn^IIIMn^II complex, 0.1 mol L⁻¹ phosphate buffer solution (pH 6.0) and 4.0 × 10⁻⁵ mol L⁻¹ hydrogen peroxide. The response of the sensor towards rutin concentration was linear using square wave voltammetry in the range of 9.99 × 10⁻⁷ to 6.54 × 10⁻⁵ mol L⁻¹ (r = 0.9998) with a detection limit of 1.75 × 10⁻⁷ mol L⁻¹. The recovery study performed with pharmaceuticals ranged from 96.6% to 103.2% and the relative standard deviation was 1.85% for a solution containing 1.0 × 10⁻³ mol L⁻¹ rutin (n = 6). The lifetime of this biomimetic sensor was 200 days (at least 750 determinations). The results obtained for rutin in pharmaceuticals using the biomimetic sensor and those obtained with the official method are in agreement at the 95% confidence level.     

A mass spectrometric method to determine activities of enzymes involved in polyamine catabolism

An analytical method for the determination of three polyamines (putrescine, spermidine, and spermine) and five acetylpolyamines [N¹-acetylspermidine (N¹AcSpd), N⁸-acetylspermidine (N⁸AcSpd), N¹-acetylspermine, N¹,N⁸-diacetylspermidine, and N¹,N¹²-diacetylspermine] involved in the polyamine catabolic pathway has been developed using a hybrid tandem mass spectrometer. Heptafluorobutyryl (HFB) derivatives of these compounds and respective internal standards labeled with stable isotopes were analyzed simultaneously by TOF MS, based on peak areas appearing at appropriate m/z values. The isomers, N¹AcSpd and N⁸AcSpd were determined from their fragment ions, the acetylamidopropyl and acetylamidobutyl groups, respectively, using MS/MS with ¹³C₂-N¹AcSpd and ¹³C₂-N⁸AcSpd which have the ¹³C₂-acetyl group as an internal standard. The TOF MS method was successfully applied to measure the activity of enzymes involved in polyamine catabolic pathways, namely N¹-acetylpolyamine oxidase (APAO), spermine oxidase (SMO), and spermidine/spermine N¹-acetyltransferase (SSAT). The following natural substrates and products labeled with stable isotopes considering the application to biological samples were identified; for APAO, [4,9,12-¹⁵N₃]-N¹-acetylspermine and [1,4,8-¹⁵N₃]spermidine (¹⁵N₃-Spd), respectively; for SMO, [1,4,8,12-¹⁵N₄]spermine and ¹⁵N₃-Spd, respectively; and for SSAT, ¹⁵N₃-Spd and [1,4,8-¹⁵N₃]-N¹-acetylspermidine, respectively.     

Preparation of the novel fluorine-18-labeled VIP analog for PET imaging studies using two different synthesis methods

Vasoactive intestinal peptide (VIP) receptors are expressed on various tumor cells in much higher density than somatostatin receptors, which provides the basis for radiolabeling VIP as tumor diagnostic agent. However, fast proteolytic degradation of VIP in vivo limits its clinical application. With the aim to develop and evaluate new ligands for depicting the VIP receptors with positron emission tomography (PET), the structure modified [R^8,15,21, L¹⁷]-VIP analog was radiolabeled with ¹⁸F using two different methods. With the first method, N-4-[¹⁸F]fluorobenzoyl-[R^8,15,21, L¹⁷]-VIP ([¹⁸F]FB-[R^8,15,21, L¹⁷]-VIP 7) was produced in a decay-corrected radiochemical yield (RCY) of 33.6 ± 3%, a specific radioactivity of 255 GBq/μmol (n = 5) within 100 min in four steps. Similarly, N-4-[¹⁸F](fluoromethyl)-benzoyl-[R^8,15,21, L¹⁷]-VIP ([¹⁸F]FMB-[R^8,15,21, L¹⁷]-VIP 8) was synthesized in a RCY of 34.85 ± 5%, a specific radioactivity of 180 GBq/μmol (n = 5) within 60 min in only one step. The two products 7 and 8 were both shown good stability in HSA. Moreover, the low bone uptakes of 7 and 8 in vivo of mice showed good defluorination stability.     

A New Coumarin-Acridone Compound as a Fluorescence Probe for Fe3+ and Its Application in Living Cells and Zebrafish

A new coumarin-acridone fluorescent probe S was designed and synthesized, and the structure was confirmed with ¹H/¹³C NMR spectrometry, single-crystal X-ray diffraction, and high-resolution mass spectrometry. This probe has high sensitivity and selectivity for Fe³⁺ over other testing metal ions at 420 or 436 nm in acetonitrile–MOPS (3-Morpholinopropanesulfonic Acid) buffer solution (20.0 μM, pH = 6.9, 8:2 (v/v)). Under physiological conditions, the probe displayed satisfying time stability with a detection limit of 1.77 µM. In addition, probe S was successfully used to detect intracellular iron changes through a fluorescence-off mode, and the imaging results of cells and zebrafish confirmed their low cytotoxicity and satisfactory cell membrane permeability, as well as their potential biological applications.     

Site-specific C content by quantitative isotopic C Nuclear Magnetic Resonance spectrometry: A pilot inter-laboratory study

Isotopic ¹³C NMR spectrometry, which is able to measure intra-molecular ¹³C composition, is of emerging demand because of the new information provided by the ¹³C site-specific content of a given molecule. A systematic evaluation of instrumental behaviour is of importance to envisage isotopic ¹³C NMR as a routine tool. This paper describes the first collaborative study of intra-molecular ¹³C composition by NMR. The main goals of the ring test were to establish intra- and inter-variability of the spectrometer response. Eight instruments with different configuration were retained for the exercise on the basis of a qualification test. Reproducibility at the natural abundance of isotopic ¹³C NMR was then assessed on vanillin from three different origins associated with specific δ¹³C_i profiles. The standard deviation was, on average, between 0.9 and 1.2‰ for intra-variability. The highest standard deviation for inter-variability was 2.1‰. This is significantly higher than the internal precision but could be considered good in respect of a first ring test on a new analytical method. The standard deviation of δ¹³C_i in vanillin was not homogeneous over the eight carbons, with no trend either for the carbon position or for the configuration of the spectrometer. However, since the repeatability for each instrument was satisfactory, correction factors for each carbon in vanillin could be calculated to harmonize the results.     

A ratiometric and exclusively selective Cu fluorescent probe based on internal charge transfer (ICT)

A new ratiometric and exclusively selective fluorescent probe N-butyl-4,5-di[N-(phenyl)-2-(amino)-acetamino]-1,8-naphthalimide (1) was designed and synthesized on the basis of the mechanism of internal charge transfer (ICT). The probe 1 showed exclusively selectivity for Cu^II in the presence of a variety of other metal ions in aqueous ethanol solutions and the binding mode of probe 1 with Cu^II was 1:1 metal-ligand complex. Fluorescent emission spectra of probe 1 in the presence of Cu^II showed a 50 nm blue shift, which is from 521 nm to 471 nm. Furthermore, probe 1 shows the same fluorescent change with the Cu^II in living cells.     

Electronic state of Fe used as Mössbauer probe in the perovskites LaMO3 (M=Ni and Cu)

For the first time a comparative study of rhombohedral LaNiO₃ and LaCuO₃ oxides, using ⁵⁷Fe Mössbauer probe spectroscopy (1% atomic rate), has been carried out. In spite of the fact that both oxides are characterized by similar crystal structure and metallic properties, the behavior of ⁵⁷Fe probe atoms in such lattices appears essentially different. In the case of LaNi_0.99Fe_0.01O₃, the observed isomer shift (δ) value corresponds to Fe³⁺ (3d⁵) cations in high-spin state located in an oxygen octahedral surrounding. In contrast, for the LaCu_0.99Fe_0.01O₃, the obtained δ value is comparable to that characterizing the formally tetravalent high-spin Fe⁴⁺(3d⁴) cations in octahedral coordination within Fe(IV) perovskite-like ferrates. To explain such a difference, an approach based on the qualitative energy diagrams analysis and the calculations within the cluster configuration interaction method have been developed. It was shown that in the case of LaNi_0.99Fe_0.01O₃, electronic state of nickel is dominated by the d⁷ configuration corresponding to the formal ionic “Ni³⁺-O²⁻” state. On the other hand, in the case of LaCu_0.99Fe_0.01O₃ a large amount of charge is transferred via Cu-O bonds from the O:2p bands to the Cu:3d orbitals and the ground state is dominated by the d⁹L configuration (“Cu²⁺−O” state). The dominant d⁹L ground state for the (CuO₆) sublattice induces in the environment of the ⁵⁷Fe probe cations a charge transfer Fe³⁺+O⁻(L)→Fe⁴⁺+O²⁻, which transforms “Fe³⁺” into “Fe⁴⁺” state. The analysis of the isomer shift value for the formally “Fe⁴⁺” ions in perovskite-like oxides clearly proved a drastic influence of the 4s iron orbitals population on the Fe−O bonds character.     

Nucleophilic substitution of nitro groups by [F]fluoride in methoxy-substituted ortho-nitrobenzaldehydes—A systematic study

As model reactions for the introduction of [¹⁸F]fluorine into aromatic amino acids, the replacement of NO₂ by [¹⁸F]fluoride ion in mono- to tetra-methoxy-substituted ortho-nitrobenzaldehydes was systematically investigated. Unexpectedly, the highly methoxylated precursors 2,3,4-trimethoxy-6-nitrobenzaldehyde and 2,3,4,5-tetramethoxy-6-nitrobenzaldehyde showed high maximum radiochemical yields (82% and 48% respectively). When the electrophilicity of the leaving group substituted carbon atom is expressed by its ¹³C NMR chemical shift a good correlation with the reaction rate at the beginning of the reaction (first min) was found (R² = 0.89), whereas the maximum radiochemical yields correlated much poorer with this electrophilicity parameter. This may be caused by side reactions becoming influencial in the further reaction course. As possible side reactions the demethylation of methoxy groups and intramolecular redox reactions could be detected by HPLC/MS.     

Luminescence of NaGdFPO4:Ln after VUV excitation: A comparison with GdPO4:Ln (Ln=Ce, Tb)

The phosphors NaGdFPO₄:Ln³⁺ and GdPO₄:Ln³⁺ (for Ln³⁺=Ce³⁺ and Tb³⁺) were prepared by solid-state reaction technique, the VUV-vis spectroscopic properties of the phosphors were investigated, and we vividly compare the luminescence of Ce³⁺ and Tb³⁺ in the hosts. For phosphors GdPO₄:Ln³⁺, the band near 155 nm in VUV excitation spectrum is assumed to be the host-related absorption, and for NaGdFPO₄:Ln³⁺ the absorption is moved to longer wavelength, near 170 nm, showing the P-O bond covalency increased after fluoridation. The f-d transitions of Ce³⁺ and Tb³⁺ in the host lattices are assigned and corroborated, and it was found that the 5d states are with lower energy in NaGdFPO₄:Ln³⁺ than those in GdPO₄:Ln³⁺. For fluoridation of GdPO₄:Ln³⁺ to NaGdFPO₄:Ln³⁺, the energy change of Ln³⁺ (Ln=Ce, Tb) 5d states is consistent with that of host-related absorption.     

Synthesis and spectral characterization of some complexes of platinum(II) containing η-methyleugenol

Several complexes of the formula trans-[Pt(Meug)(Am)Cl₂], Meug: methyleugenol (4-allyl-1,2-dimethoxybenzene), a η²-coordinated olefin, and Am: ammine, methylamine, diethylamine, o-toluidine, m-toluidine, p-toluidine, o-anisidine, m-anisidine and p-anisidine have been prepared. UV, IR, Raman, ¹H NMR, ¹³C NMR and 2D NMR spectra of the complexes were recorded and analyzed.     

Eu luminescence—a structural probe in BiCa4(PO4)3O, an apatite related phosphate

Eu³⁺ luminescence is studied in apatite-related phosphate BiCa₄(PO₄)₃O. Compositions of the formula Bi_1−xEu_xCa₄(PO₄)₃O [x=0.05, 0.1, 0.3, 0.5, 0.8 and 1.0] are synthesized and they are isostructural with parent BiCa₄(PO₄)₃O. Room temperature photoluminescence shows the various transitions ⁵D₀→⁷F_J(=0,1,2) of Eu³⁺. The emission results of compositions with different Eu³⁺ content show the difference in site occupancy of Eu³⁺ in Bi_1−xEu_xCa₄(PO₄)₃O. The intense ⁵D₀-⁷F₀ line at 574 nm for higher Eu³⁺ content is attributed to the presence of strongly covalent Eu-O bond that is possible by substituting Bi³⁺ in the Ca(2) site. This shows the preferential occupancy of Bi³⁺ in Ca(2) site and this has been attributed to the 6s² lone pair electrons of Bi³⁺. This is further confirmed by comparing the emission results with La_0.95Eu_0.05Ca₄(PO₄)₃O.     

Hydrolysis of ammonium oxofluorotungstates: A F, O and W NMR study

Fluorine-19 and natural abundance ¹⁷O and ¹⁸³W NMR spectroscopy were employed for the characterization of aqueous solutions of (NH₄)₂WO₂F₄ and (NH₄)₃WO₃F₃. Dissolution of the (NH₄)₂WO₂F₄ complex is accompanied by its partial acid hydrolysis to give the trans(mer)-dimer, [W₂O₅F₆]⁴⁻, and unreacted cis-[WO₂F₄]²⁻. The cis(fac)-[W₂O₅F₆]⁴⁻ anion is the major soluble product resulting from the alkaline hydrolysis of (NH₄)₂WO₂F₄ along with the isolation of the solid (NH₄)₂WO₃F₂. In addition, the edge-bridging dimer, [W₂O₆F₄]⁴⁻, and the cyclic trimer, [W₃O₉F₆]⁶⁻, are also suggested as hydrolysis products. Decomposition of (NH₄)₃WO₃F₃ occurs in aqueous solution to give NH₄WO₃F.     

Crosslinking and ageing of C labelled polyisoprene part 1: Synthesis and polymerisation of 4-C-isoprene

4-¹³C-isoprene was prepared by the Wittig reaction. All reaction steps were optimised using unlabelled compounds. By reaction with triphenyl phosphine, ¹³C labelled methyl iodide afforded labelled methyl-triphenyl phosphine iodide in 84% yield. This reacted with meth acrolein with production of 4-¹³C-isoprene in 64% yield. Labelled polyisoprene was prepared by anionic polymerisation initiated by t-butyl lithium. Based on ¹³CH₃I the overall yield is ca 30%. The polymer was characterized by ¹H and ¹³C NMR spectroscopy. The contribution of each microstructure was [cis 1-4, 72%]; [trans 1-4, 10%]; [3-4, 18%].