Fe Spin crossover materials based on dissymmetrical N4 Schiff bases including 2-pyridyl and 2R-imidazol-4-yl rings: Synthesis,crystal structure and magnetic and Mössbauer properties

The synthesis and characterization of new symmetrical Fe^II complexes, [FeL^A(NCS)₂] (1), and [FeL^Bx(NCS)₂] (2–4), are reported (L^A is the tetradentate Schiff base N,N′-bis(1-pyridin-2-ylethylidene)-2,2-dimethylpropane-1,3-diamine, and L^Bx stands for the family of tetradentate Schiff bases N,N′-bis[(2-R-1H-imidazol-4-yl)methylene]-2,2-dimethylpropane-1,3-diamine, with: R = H for L^B1 in 2, R = Me for L^B2 in 3, and R = Ph for L^B3 in 4). Single-crystal X-ray structures have been determined for 1 (low-spin state at 293 K), 2 (high-spin (HS) state at 200 K), and 3 (HS state at 180 K). These complexes remain in the same spin-state over the whole temperature range [80–400 K]. The dissymmetrical tetradentate Schiff base ligands L^Cx, N-[(2-R₂-1H-imidazol-4-yl)methylene]-N′-(1-pyridin-2-ylethylidene)-2,2-R₁-propane-1,3-diamine (R₁ = H, Me; R₂ = H, Me, Ph), containing both pyridine and imidazole rings were obtained as their [FeL^Cx(NCS)₂] complexes, 5–10, through reaction of the isolated aminal type ligands 2-methyl-2-pyridin-2-ylhexahydropyrimidine (R₁ = H, 5–7) or 2,5,5-trimethyl-2-pyridin-2-ylhexahydropyrimidine (R₁ = Me, 8–10) with imidazole-4-carboxaldehyde (R₂ = H: 5, 8), 2-methylimidazole-4-carboxaldehyde (R₂ = Me: 6, 9), and 2-phenyl-imidazole-4-carboxaldehyde (R₂ = Ph: 7, 10) in the presence of iron(II) thiocyanate. Together with the single-crystal X-ray structures of 7 and 9, variable-temperature magnetic susceptibility and Mössbauer studies of 5–10 showed that it is possible to tune the spin crossover properties in the [FeL^Cx(NCS)₂] series by changing the 2-imidazole and/or C2-propylene susbtituent of L^Cx.     

Synthesis and X-ray diffraction analysis/crystal structure of new germatranes containing methyl substituents in three five-membered chelating rings

Three monomeric germatranes, 1-isopropoxy-3,3,7,7,10,10-hexamethyl-2,8,9-trioxa-5-aza-1-germatricyclo[3.3.3.0^1,5]undecane (1), 1-isopropoxy-3,3,7,7-tetramethyl-2,8,9-trioxa-5-aza-1-germatricyclo[3.3.3.0^1,5]undecane (2), and 1-isopropoxy-3,3-dimethyl-2,8,9-trioxa-5-aza-1-germatricyclo[3.3.3.0^1,5]undecane (3) have been synthesized by the reaction of Ge(O-i-Pr)₄ in refluxing toluene with corresponding triethanolamines, (HOCH₂CH₂)_nN(CH₂CMe₂OH)_3−n (n = 0, L1H₃; n = 1, L2H₃; n = 2, L3H₃), where the number of CMe₂ groups adjacent to a OH functionality varied from 3 (L1H₃) to 2 (L2H₃), and to 1 (L3H₃). These germatranes 1-3 have been characterized by solution ¹H and ¹³C{¹H} NMR and the solid state structure of 2 has been determined by single crystal X-ray diffraction.     

Structural studies of phosphor-1,1-diselenoato Mn(I) and Re(I) complexes

Mononuclear complexes of the type, M(CO)₄[Se₂P(OR)₂] (M = Mn, R = ⁱPr, 1a; Et, 1b; M = Re, R = ⁱPr, 3a; Et, 3b) can be prepared from either [-Se(Se)P(OⁱPr)₂]₂ (A) or [Se{-Se(Se)P(OEt)₂}₂] (B) with M(CO)₅Br. O,O′-dialkyl diselenophosphate ([(RO)₂PSe₂]^-, abbreviated as dsep) ligands generated from A and B act as a chelating ligand in these complexes. Upon refluxing in acetonitrile, these mononuclear complexes yield dinuclear complexes with a general formula of [M₂(CO)₆{Se₂P(OR)₂}₂] (M = Mn, R = ⁱPr, 2a; Et, 2b; M = Re, R = ⁱPr, 4a; Et, 4b). Dsep ligands display a triconnective, bimetallic bonding mode in the dinuclear compounds and this kind of connective pattern has never been identified in any phosphor-1,1-diselenoato metal complexes. Compounds 2b, 3b, and 4 are structurally characterized. Compounds 2b and 3b display weak, secondary Se?Se interactions in their lattices.     

F NMR spectroscopy as useful tool for determining the structure in solution of coordination compounds of MF5 (M = Nb, Ta)

The salts [S(NMe₂)₃][MF₆] (M = Nb, 2a; M = Ta, 2b) and [S(NMe₂)₃][M₂F₁₁] (M = Nb, 2c; M = Ta, 2d) have been prepared by reacting MF₅ (M = Nb, 1a; M = Ta, 1b) with [S(NMe₂)₃][SiMe₃F₂] (TASF reagent) in the appropriate molar ratio. The solid state structure of 2b has been ascertained by X-ray diffraction. The 1:1 molar ratio reactions of 1a with a variety of organic compounds (L) give the neutral adducts NbF₅L [L = Me₂CO, 3a; L = MeCHO, 3b; L = Ph₂CO, 3c; L = tetrahydrofuran (thf), 3d; L = MeOH, 3e; L = EtOH, 3f; L = HOCH₂CH₂OMe, 3g; L = Ph₃PO, 3h; L = NCMe, 3i] in good yields. The complexes MF₅L [M = Nb, L = HCONMe₂, 3j; M = Nb, L = (NMe₂)₂CO, 3k; M = Ta, L = (NMe₂)₂CO, 3l; M = Nb, L = OC(Me)CHCMe₂, 3m] have been detected in solution in admixture with other unidentified products, upon 2:1 molar reaction of 1 with the appropriate reagent L. The ionic complexes [NbF₄(tht)₂][NbF₆], 4a, and [NbF₄(tht)₂][Nb₂F₁₁], 4b, have been obtained by combination of tetrahydrothiophene (tht) and 1a, in 1:1 and 2:3 molar ratios, respectively. The treatment of 1 with a two-fold excess of L leads to the species [MF₄L₄][MF₆] [M = Nb, L = HCONMe₂, 5a; M = Ta, L = HCONMe₂, 5b; M = Nb, L = thf, 5c; M = Ta, L = thf, 5d; M = Nb, L = OEt₂, 5e]. The new complexes have been fully characterised by NMR spectroscopy. Moreover, the revised ¹⁹F NMR features of the known compounds MF₅L [M = Ta, L = Me₂CO, 3n; M = Ta, L = Ph₂CO, 3o; M = Ta, L = MePhCO, 3p; M = Ta, L = thf, 3q; M = Nb, L = CH₃CO₂H, 3r; M = Nb, L = CH₂ClCO₂H, 3s; M = Ta, L = CH₂ClCO₂H, 3t], TaF₄(acac), TaF₄(Me-acac) and [TaF(Me-acac)₃][TaF₆] (Me-acac = methylacetylacetonato anion) are reported.     

Titanium (IV) complexes based on substituted 2-[(2-hydroxyethyl)]aminophenols

Novel substituted 2-[(2-hydroxyethyl)]aminophenols, MeN(CHR¹CR²R³OH)(C₆H₄-o-OH) (2-5), were synthesized by the reaction of 2-methylaminophenol with corresponding oxiranes. Titano-spiro-bis(ocanes) [MeN(CHR¹CR²R³O)(C₆H₄-o-O)]₂Ti 6-9 (2, 6, R¹ = H, R² = R³ = Me; 3, 7, R¹ = R² = Ph (treo-), R³ = H; 4, 8, R¹ = Ph, R² = R³ = H; 5, 9, R¹ = R² = H, R³ = Ph) based on [ONO]-ligands have been synthesized. The obtained compounds were characterized by ¹H and ¹³C NMR spectroscopy and elemental analysis data. The complex [Ti(μ²-O){O-o-C₆H₄}{μ²-CMe₂CH₂}NMe]₆ (10) was obtained by controlled hydrolysis of 6. Molecular structure of 10 was determined by X-ray structure analysis.     

Palladium and platinum complexes of chiral and achiral calix[4]arene bisphosphite ligands

Chiral and achiral p-tert-butyl-calix[4]arene bisphosphites (L¹–L³) have been synthesized by the reaction of p-tert-butyl-calix[4]arene and the phosphorodichloridites, ROPCl₂ [R = (1S,2R,5R)-(+)-iso-menthyl (L¹), (1R,2S,5R)-(−)-menthyl (L²) or C₆H₄Bu^t-4 (L³)]. These bisphosphites function as chelating ligands in palladium(II) and platinum(II) complexes which are formed in good yields by the reaction of PdCl₂(PhCN)₂, MCl₂(COD) (M = Pd or Pt) or PdMeCl(COD) with the respective calix[4]arene bisphosphite. Single crystal X-ray diffraction studies performed on the complexes [PdCl₂(L¹)], [PdCl₂(L²)], [PdCl₂(L³)] and [PtCl₂(L³)] reveal a near square planar geometry around the metal with the two chloride ligands in a cis disposition. The crystal packing in the complexes [PdCl₂(L¹)] and [PdCl₂(L²)], which crystallize in the chiral (P6₁22) space group, shows different hydrophobic channels with intermolecular C–H?Cl hydrogen bonding. The complexes [PdCl₂(L³)] and [PtCl₂(L³)] are isostructural and the molecules in the crystal lattice are linked by intermolecular C–H?Cl and C–H?O hydrogen bonds.     

The dimerization and photochemical rearrangement of pentacyclo-[5.4.0.0.0.0]undecane-8-thione

Pentacyclo[5.4.0.0^2,6.0^3,10.0^5,9]undecan-8-one 1 is readily sulfurated into pentacyclo[5.4.0.0^2,6.0^3,10.0^5,9]undecane-8-thione 2 with Lawesson’s reagent in dry THF. Upon standing at ambient temperature the thione 2 formed the corresponding thio-dimer 3 within 10 days. When the thio-dimer 3 was exposed to oxygen and ultraviolet light an unexpected photochemical oxidation and rearrangement took place to form the stable disulfenate 5.     

Dioxomolybdenum(VI) complexes containing N-heterocyclic carbenes

Compound MoO₂Cl₂(THF)₂ reacts with two equivalents of 1,3-dialkyl substituted 4,5-dimethylimidazol-2-ylidenes to give the dioxomolybdenum(VI) complexes MoO₂Cl₂(L^R)₂ [R = Me (1), i-Pr (2)]. Treatment of MoO₂Cl₂(THF)₂ with one equivalent of the N-heterocyclic carbenes L^Me, L^i-Pr and ^C1L^n-Bu (L^Me = 1,3,4,5-tetramethylimidazol-2-ylidene, L^i-Pr = 1,3-diisopropyl-4,5-dimethylimidazol-2-ylidene, and ^C1L^n-Bu = 1,3-dibutyl-4,5-dichloroimidazol-2-ylidene) affords the monocarbene adducts MoO₂Cl₂(L^R) [R = Me (3), i-Pr (4)] and MoO₂Cl₂(^C1L^n-Bu) (5), respectively. Decomposition of complexes 1-5 affords a molybdenum oxychloride anion [Mo₂O₅Cl₄]²⁻ as an imidazolium salt.     

First identification of benzo[cd]phenanthro[1,2,3-lm]perylene by high-pressure liquid chromatography with ultraviolet-visible spectroscopy and mass spectrometry

Benzo[cd]phenanthro[1,2,3-lm]perylene has been identified as a product of supercritical 1-methylnaphthalene pyrolysis from an experiment performed at 585 °C, 110 atm, and 140 s in a supercritical fluid flow reactor. The identification of benzo[cd]phenanthro[1,2,3-lm]perylene is based on the product's mass spectrum, HPLC elution time, and UV absorbance spectrum. The mass spectrum of the identified 1-methylnaphthalene pyrolysis product, called component I here, reveals a molecular weight of 426, corresponding to a C₃₄H₁₈ polycyclic aromatic hydrocarbon (PAH). The extremely long HPLC elution time, 20–48 min longer than those of the four other C₃₄H₁₈ PAH components in this product mixture, indicates that component I has a planar structure with a high length-to-breadth ratio. Annellation theory is used to interpret and compare the UV spectrum of component I with those of the C₃₀H₁₆ benzo[cd]naphtho[1,2,3-lm]perylene and the C₃₆H₁₈ teropyrene, structures with one ring less and one ring more, respectively, than that of component I. This analysis of component I's UV spectrum, in conjunction with its mass spectrum and HPLC elution behavior, all lead to the identification of component I as the nine-ring PAH benzo[cd]phenanthro[1,2,3-lm] perylene, a molecule whose existence has never before been documented.     

Synthesis and crystal structures of boratranes with methyl substituents on the atrane cage

Three monomeric boratranes B[(OCH₂CH₂)_nN(CH₂CMe₂O)_3−n] (n = 0, 1; n = 1, 2; n = 2, 3) have been synthesized by the reaction of B(OMe)₃ with a series of triethanolateamines such as [(OCH₂CH₂)_nN(CH₂CMe₂O)_3−n]³⁻ (n = 0, L1; n = 1, L2; n = 2, L3), where the number of CMe₂ groups adjacent to the OH functionality varied from 3 (L1H₃) to 2 (L2H₃) to 1 (L3H₃). These boratranes 1-3 have been characterized by solution ¹H, ¹³C{¹H} and ¹¹B NMR, and the crystal structures of 1 and 2 have been determined by single crystal X-ray diffraction.     

Synthesis and characterization of fluorinated ionomer p-perfluoro-[1-(2-sulfonic)ethoxy]ethylated polyacrylonitrile-styrene

Fluorinated ionomer p-perfluoro[1-(2-sulfonic)ethoxy]ethylated polyacrylonitrile-styrene (SFAS) (5) was synthesized via electron transfer reaction between polyacrylonitrile-styrene (AS) (1) and perfluoro-di[2-(2-fluorosulfonyl)ethoxy]propionyl peroxide (FAP) (2) and followed by alkali hydrolysis and acidification of p-perfluoro[1-(2-fluorosulfonyl)ethoxy]ethylated polyacrylonitrile-styrene (3). The microstructure of ionomer 5 was well characterized by FTIR and ¹⁹F NMR. Its desulfonation occurred above 197 °C was found by TGA, the degree of substitution (DS) and ion exchange capacity (IEC) determined by titration were well controlled through changing the molar ratio of 2:1. The proton exchange membranes made of ionomer 5 have water uptake from 13.4 to 135.3% and conductivity up to 10⁻² S cm⁻¹ at 25 °C.     

A “sodium trap” based on benzo-15-crown-5 with an exocyclic N-(thiophosphoryl)thiourea moiety

For N-(thio)phosphorylthioureas of the common formula RC(S)NHP(X)(OiPr)₂HL^I (R = N-(4′-aminobenzo-15-crown-5), X = S), HL^II (R = N-(4′-aminobenzo-15-crown-5), X = O), HL^III (R = PhNH, X = S), HL^IV (R = PhNH, X = O), and (N,N′-bis-[C(S)NHP(S)(OiPr)₂]₂-1,10-diaza-18-crown-6) H₂L^V, salts LiL^I,III,IV, NaL^I–IV, KL^I–IVM₂L^V (M = Li⁺, Na⁺, K⁺), Ba(L^I,III,IV)₂, and BaL^V have been synthesized and investigated. Compounds NaL^I,II quantitatively drop out as a deposit in ethanol medium, allowing the separation of Na⁺ and K⁺ cations. This effect is not displayed for the other compounds. The crystal structures of HL^III and the solvate of the composition [K(Me₂CO)L^III] have been investigated by X-ray crystallography.     

Synthesis and characterisation of six Fe(II or III), Co(II) or Zr(IV) complexes containing the ligand [CH(SiMe2R)P(Ph)2NSiMe3] (R = Me, NEt2) and of [Co{N(SiMe3)C(Ph)C(H)P(Ph)2NSiMe3}2]

The C,N-(trimethylsilyliminodiphenylphosphoranyl)silylmethylmetal complexes [Fe(L)₂] (3), [Co(L)₂] (4), [ZrCl₃(L)]·0.83CH₂Cl₂ (5), [Fe(L)₃] (6), [Fe(L′)₂] (7) and [Co(L′)₂] (8) have been prepared from the lithium compound Li[CH(SiMe₂R)P(Ph)₂NSiMe₃] [1a, (R = Me) {≡ Li(L)}; 1b, (R = NEt₂) {≡ Li(L′)}] and the appropriate metal chloride (or for 7, FeCl₃). From Li[N(SiMe₃)C(Ph)C(H)P(Ph)₂NSiMe₃] [≡ Li(L″)] (2), prepared in situ from Li(L) (1a) and PhCN, and CoCl₂ there was obtained bis(3-trimethylsilylimino- diphenylphosphoranyl-2-phenyl-N-trimethylsilyl-1-azaallyl-N,N′)cobalt(II) (9). These crystalline complexes 3-9 were characterised by their mass spectra, microanalyses, high spin magnetic moments (not 5) and for 5 multinuclear NMR solution spectra. The X-ray structure of 3 showed it to be a pseudotetrahedral bis(chelate), the iron atom at the spiro junction.     

Palladium(II)/allylpalladium(II) complexes with xanthate ligands: Single-source precursors for the generation of palladium sulfide nanocrystals

In an effort to find simple and common single-source precursors for palladium sulfide nanostructures, palladium(II) complexes, [Pd(S₂X)₂] (X = COMe (1), COⁱPr (2)) and η³-allylpalladium complexes with xanthate ligands, [(η³-CH₂C(CH₃)CR₂)Pd(S₂X)] (R = H, X = COMe (3); R = H, X = COEt (4); R = H, X = COⁱPr (5); R = CH₃, X = COMe (6)), have been investigated. The crystal structures of [Pd(S₂X)₂] (X = COMe (1), CoⁱPr (2)) and [(η³-CH₂C(CH₃)CH₂)Pd(S₂COMe)] (3) have been established by single crystal X-ray diffraction analysis. The complexes, 1, 2 and 3 all contain a square planar palladium(II) centre. In the allyl complex 3, this is defined by the two sulfurs of the xanthate and the outer carbons of the 2-methylallyl ligand, while in the complexes, 1 and 2 it is defined by the four sulfur atoms of the xanthate ligand. Thermogravimetric studies have been carried out to evaluate the thermal stability of η³-allylpalladium(II) analogues. The complexes are useful precursors for the growth of nanocrystals of PdS either by furnace decomposition or solvothermolysis in dioctyl ether. The solvothermal decomposition of complexes in dioctyl ether gives a new metastable phase of PdS which can be transformed to the more stable tetragonal phase at 320 °C. The nanocrystals obtained have been characterized by PXRD, SEM, TEM and EDX.     

C-F?M interaction in anionic α-fluorovinyl rhenium oxycarbene complexes and their β-fluoroenolate analogs

The C-F?M⁺ interaction in anionic σ-(α-fluorovinyl)rhenium oxycarbene complexes, [RCFCFReC(O)R′(CO)₄]M (1-6), M = Na, Li, K is studied by ¹⁹F NMR in THF and Et₂O. The coordination of α-F to M⁺ results in an upfield shift of the corresponding ¹⁹F NMR signal and a decrease of ¹J_CF. The maximum shift is found for the Li salt of complex 4 in Et₂O (Δδ_Fα = 36.4 ppm), in which case a ⁷Li-¹⁹F spin-spin coupling is also observed (J_LiF = 40 Hz). The ΔE of C-F?M⁺ interaction and its effect on ¹⁹F shielding was further studied by DFT calculations using β-fluoroenolates as models, which confirmed a strong impact of CF-bond environment on the coordination ability of fluorine in these F,O-chelates. A compound with a β-fluoroenolate backbone but without rhenium, o-(α-fluorovinyl)phenolate 12, was prepared and studied by ¹⁹F NMR, and similarly showed indications of C-F?M⁺ interaction in THF solution. It is concluded that the donor ability of fluorine in the studied system is enhanced because of the conjugation of α-fluorovinyl group with the enolate π-system and back donation from the transition metal.     

Synthesis, characterization and electrochemical behavior of some N-heterocyclic carbene-containing active site models of [FeFe]-hydrogenases

Treatment of parent compounds [(μ-SCH₂)₂X]Fe₂(CO)₆ (A, X = O; B, X = NBu-t; C, X = NC₆H₄OMe-p) with N-heterocyclic carbene I_Mes (I_Mes = 1,3-bis(mesityl)imidazol-2-ylidene) generated in situ through reaction of imidazolium salt I_Mes ·HCl with n-BuLi or t-BuOK afforded the monocarbene-substituted complexes [(μ-SCH₂)₂X]Fe₂(CO)₅(I_Mes) (1, X = O; 2, X = NBu-t; 3, X = NC₆H₄OMe-p). Similarly, the monocarbene and dicarbene-substituted complexes [(μ-SCH₂)₂NBu-t]Fe₂(CO)₅[I^∗_Mes(CH₂)₃I^∗_Mes]·HBr (4) and [(μ-SCH₂)₂CH₂Fe₂(CO)₅]₂[μ-I^∗_Mes(CH₂)₃I^∗_Mes] (5, I^∗_Mes = 1-(mesityl)imidazol-2-ylidene) could be prepared by reactions of parent compound B with the mono-NHC ligand-containing imidazolium salt [I^∗_Mes(CH₂)₃I^∗_Mes] · HBr and parent compound [(μ-SCH₂)₂CH₂]Fe₂(CO)₆ (D) with di-NHC ligand I^∗_Mes(CH₂)₃I^∗_Mes (both NHC ligands were generated in situ from reaction of n-BuLi with imidazolium salt [I^∗_MesI^∗_Mes(CH₂)₃I^∗_Mes] · 2HBr), respectively. The imidazolium salt [I^∗_Mes(CH₂)₃I^∗_Mes] · 2HBr was prepared by reaction of 1-(mesityl)imidazole with Br(CH₂)₃Br. All the new model compounds 1-5 and imidazolium salt [I^∗_Mes(CH₂)₃I^∗_Mes] · 2HBr were fully characterized by elemental analysis, spectroscopy, and X-ray crystallography. On the basis of electrochemical studies of 1 and 2, compound 2 was found to be a catalyst for proton reduction to hydrogen. In addition, an EECC mechanism for this electrocatalytic reaction is preliminarily suggested.     

Chemically modified oximato complexes of titanium(IV) isopropoxide as new precursors for the sol-gel preparation of nano-sized titania: Crystal and molecular structure of [Ti{ONC10H16}4·2CH2Cl2]

Reactions of [Ti(OPrⁱ)₄] with various oximes, in anhydrous refluxing benzene yielded complexes of the type [Ti{OPrⁱ}_4−n{L}_n], where, n = 1-4 and LH = (CH₃)₂CNOH (1-4), C₉H₁₆CNOH (5-8) and C₉H₁₈CNOH (9-12). The compounds were characterized by elemental analyses, molecular weight measurements, FAB-mass, FT-IR and NMR (¹H, ¹³C{¹H}) spectral studies. The FAB-mass spectra of mono- (1), and di- (2), (6), (10) substituted products indicate their dimeric nature and that of tri- (3) and tetra- (4), (8) substituted derivatives suggest their monomeric nature. Crystal and molecular structure of [Ti{ONC₁₀H₁₆}₄·2CH₂Cl₂] (8A) suggests that the oximato ligands bind the metal in a dihapto η²-(N, O) manner, leading to the formation of an eight coordinated species. Thermogravimetric curves of (3), (6) and (10) exhibit multi-step decomposition with the formation of TiO₂ as the final product in each case, at 900 °C. Low temperature (∼600 °C) sol-gel transformations of (2), (3), (4), (6), (7) and (8) yielded nano-sized titania (a), (b), (c), (d), (e) and (f), respectively. Formation of anatase phase in all the titania samples was confirmed by powder XRD patterns, FT-IR and Raman spectroscopy. SEM images of (a), (b), (c), (d), (e) and (f) exhibit formation of nano-grains with agglomer like surface morphologies. Compositions of all the titania samples were investigated by EDX analyses. The absorption spectra of the two representative samples, (a) and (f) indicate an energy band gap of 3.17 eV and 3.75 eV, respectively.     

Palladiumdichloride (ferrocenylethynyl)phosphanes and their use in Pd-catalyzed Heck-Mizoroki- and Suzuki-Miyaura carbon-carbon cross-coupling reactions

In this work the synthesis of phosphane selenides (FcCC)_nPh_3−nPSe (2a, n = 1; 2b, n = 2; 2c, n = 3; Fc = ferrocenyl, (η⁵-C₅H₄)(η⁵-C₅H₅)Fe) from (FcCC)_nPh_3−nP (1a, n = 1; 1b, n = 2; 1c, n = 3) and selenium is described to estimate the σ-donor properties of these systems by ³¹P{¹H} NMR spectroscopy. Progressive replacement of phenyl by ferrocenylethynyl causes a shielding of the phosphorus atom with increasing of the ¹J(³¹P-⁷⁷Se) coupling constants.The palladiumdichloride metal-organic complexes [((FcCC)_nPh_3−nP)₂PdCl₂] (3a, n = 1; 3b, n = 2; 3c, n = 3) have been used as (pre)catalysts in the Suzuki-Miyaura (reaction of 2-bromo-toluene (4a) and 4-bromo-acetophenone (4b), respectively, with phenyl boronic acid (5) to give 2-methyl biphenyl (6a) and 4-acetyl biphenyl (6b)) and in the Heck-Mizoroki reaction (treatment of iodobenzene (7) with tert-butyl acrylate (8) to give E-tert-butyl cinnamate (9)).The structures of molecules 1a, 1c, 2c, and 3c in the solid state were determined by single X-ray structure analysis showing that the structural parameters of these systems are unexceptional and correspond to those of related phosphanes, seleno phosphanes, and palladium dichloride complexes.