电喷雾离子源(ESI)中带电液滴的形成与碎裂模拟

基于电喷雾离子源(ESI)中液流的输运行为,构建了相应的物理模型,并利用Fluent软件对电喷雾离子源中带电液滴的形成与裂变过程进行模拟研究.分别考察了毛细管电压、离子源温度和溶液表面张力3个参数对源内液滴粒径分布的影响.模拟结果表明,较大的毛细管电压、较高的离子源温度和较低的表面张力条件下得到的液滴粒径较小,液滴碎裂效果较好.模拟结果与文献报道及经验公式结果一致.     

键合方法对聚二甲基硅氧烷液滴型微流控芯片的影响

液滴型微流控芯片表面性质是影响其性能的重要因素. 研究了不同键合方法对基于聚二甲基硅氧烷(PDMS)的液滴型微流控芯片微管道表面性质的影响, 并分别观察和评价了不同键合方法所制作液滴型微流控芯片应用于制备油包水和水包油两种液滴分散体系的效果. 结果显示热扩散键合方法适用于制作油包水型PDMS液滴型微流控芯片, 而等离子键合方法制作的PDMS芯片适于形成水包油型的液滴分散体系.     

羟乙基纤维素中毛细管电泳DNA分离特性研究

本实验以羟乙基纤维素(HEC)为筛分介质,以100～1500 bp DNA ladder为分离对象,系统地研究了直流电场下毛细管电泳时DNA分离特性.论文考察了DNA迁移淌度及分离度随HEC溶液浓度和分子量、毛细管两端电场强度(E)、毛细管有效长度(le)及其内径形状、背景电解液(BGE)温度等因素变化规律.研究发现:(1)当筛分介质HEC浓度高于其阈值浓度c*时,HEC分子量越大,相邻DNA片段之间淌度差越大,HEC浓度越高,其迁移淌度越低;(2)对于相邻的DNA片段,le在一定范围内,其分离度随le增大而线性升高;(3)毛细管有效长度一定时,DNA淌度随毛细管侧面积与截面积之比R增大而升高,分离效率提高;(4)BGE温度升高,DNA在筛分介质中扩散效应增强,迁移淌度变大,相邻DNA片段间分离度减小.根据以上结论,在直流电场下毛细管电泳φ×174-Hirc II限制性酶切片段,并实现了其高分离度、快速分离.     

添加剂在毛细管电泳分离DNA中的作用研究进展

使用无胶筛分介质的毛细管电泳（包括毛细管阵列电泳和微芯片电泳）是最重要的DNA分离技术之一。在低粘度的无胶筛分介质中加入某种添加剂是一种有效且简单的克服填充困难和提高DNA分离性能的方法。本文就各种添加剂（如多羟基化合物、粘土、金纳米粒子、乳胶粒等）对提高无胶筛分介质中DNA的分离性能的作用进行了综述。     

毛细管电泳检测神经细胞凋亡

建立了毛细管电泳检测凋亡细胞DNA片段的方法.以DNA相对分子质量标准品为溶质,考察了分离条件(电压、进样时间、温度、聚合物浓度)对分离的影响.在优化条件下,利用毛细管无胶筛分电泳对缺氧缺血过程中不同时间点神经PC12细胞DNA片段进行了分析,并与流式细胞仪结果比较,研究缺氧缺血时胶质细胞凋亡过程.     

微流控芯片中微液滴的操控及其应用

微流控芯片中微液滴的操控方法主要有多相流法、电润湿法、热毛细管法、介电电泳法和气动法;应用范围包括乳化、混合、包埋、萃取、微反应器以及生物鉴定等。论文展望了微液滴的发展前景。     

食品包装材料中13种增塑剂的毛细管气相色谱法测定

建立了索氏提取、固相萃取净化浓缩、毛细管气相色谱法测定塑料食品包装材料中13种增塑剂的方法.优化了固相萃取淋洗剂、洗脱剂和洗脱剂体积等参数.样品经正己烷索氏提取后,用硅胶小柱净化浓缩.以正己烷-甲苯为淋洗剂,2 mL乙酸乙酯为洗脱剂.过滤后的洗脱液用气相色谱仪分析.结果显示,13种增塑剂在0.1～1000 mg/L范围...     

一种用于核酸高灵敏检测的液滴式数字聚合酶链式反应芯片

为了实现对核酸的高灵敏度检测,构建了一种新型的液滴式数字聚合酶链式反应(dd PCR)芯片.该芯片由产生液滴的聚二甲基硅氧烷(PDMS)模块和储存液滴的玻璃腔室构成.实验结果表明,该芯片可以在25 min内产生2×106个直径为20μm的微液滴(体积4.187 p L).利用该芯片定量检测了表皮生长因子受体(EGFR)基因第19号外显子,在DNA浓度为106~101copies/μL范围内呈现良好的线性关系(R2=0.9998);在浓度为106copies/μL的19号外显子野生型DNA中检测105~100copies/μL的突变型DNA,其检测敏感度可达到0.0001%.该方法在同一芯片上实现了液滴产生、核酸扩增和荧光信号读取的功能,在核酸绝对定量及痕量突变基因的检测中具有潜在应用前景.     

高效毛细管电泳-激光诱导荧光技术在荧光标记DNA分析中的研究进展

激光诱导荧光检测器是目前最灵敏的检测器之一,已广泛用于毛细管电泳DNA分析中.该文对毛细管电泳-激光诱导荧光技术在DNA分析中3种主要的DNA荧光标记方式:荧光基团共价标记、PCR后标记、内插荧光染料标记进行了综述,并对其发展前景进行了展望.引用了78篇文献.     

基于液滴微流控接口的高效液相色谱-毛细管电泳二维分离平台初探

蛋白质组体系的高度复杂性需要更高分辨率的多维分离技术。近年兴起的液滴技术在微纳尺度样品操控方面具有微体积、低扩散、无返混等独特优势,有望为多维分离平台的接口提供解决方案。通过采用不同结构的液滴微流控芯片可以实现“液滴生成”与“油相排除”功能,进行样品由连续流-非连续流-连续流的高效转移,将不同的分离模式进行二维耦联。本研究利用液滴作为接口技术耦联高效液相色谱与毛细管电泳构建二维分离系统,以蛋白质降解的复杂多肽混合物为样品,考察了液滴接口二维分离平台的可行性和有效性,并获得3000以上的峰容量,初步展示了该接口技术在多维分离分析领域的应用潜力。     

Non‐hybridization single nucleotide polymorphism detection and genotyping assay through direct discrimination of single base mutation by capillary electrophoretic separation of single‐stranded DNA

The significant demands for single nucleotide polymorphism detection and genotyping assays have grown. Most common assays are based on the recognition of the target sequence by the hybridization with its specific probe having the complementary sequence of the target. Herein, a simple, label‐free, and economical non‐hybridization assay was developed for single nucleotide polymorphism detection and genotyping, based on the direct discrimination of single base mutation by simple capillary electrophoresis separation for single‐stranded DNA in an acidic electrophoretic buffer solution containing urea. Capillary electrophoresis separation of single‐base sequential isomers of DNA was achieved due to charge differences resulting from the different protonation properties of the DNA bases. Single nucleotide polymorphism detection and genotyping were achieved by discriminating the electropherogram pattern change, that is, peak number in the electropherogram, obtained by the proposed method. The successful practical application of the proposed method was demonstrated through single nucleotide polymorphism detection and genotyping on a known gene region of 84‐mer, in which guanine to adenine single‐base mutation is commonly observed, using a human hair sample in combination with genomic DNA extraction, polymerase chain reaction amplification, DNA purification from polymerase chain reaction products, and capillary electrophoresis separation.     

N-Methylimidazolium modified magnetic particles as adsorbents for solid phase extraction of genomic deoxyribonucleic acid from genetically modified soybeans

N-Methylimidazolium modified magnetic particles (MIm-MPs) were prepared and applied in the solid phase extraction of genomic deoxyribonucleic acid (DNA) from genetically modified soybeans. The adsorption of MIm-MPs for DNA mainly resulted from the strong electrostatic interaction between the positively charged MPs and the negatively charged DNA. The elution of DNA from MPs–DNA conjugates using phosphate buffer resulted from the stronger electrostatic interaction of phosphate ions with MPs than DNA. In the extraction procedure, no harmful reagents (e.g. phenol, chloroform and isopropanol, etc.) used, high yield (10.4 μg DNA per 30 mg sample) and high quality (A₂₆₀/A₂₈₀ = 1.82) of DNA can be realized. The as-prepared DNA was used as template for duplex-polymerase chain reaction (PCR) and the PCR products were analyzed by a sieving capillary electrophoresis method. Quick and high quality extraction of DNA template, and fast and high resolution detection of duplex PCR products can be realized using the developed method. No toxic reagents are used throughout the method.     

Evaluation of methylation degree from formalin-fixed paraffin-embedded DNA extract by field-amplified sample injection capillary electrophoresis with UV detection

Alterations in global DNA methylation are implicated in several pathobiological processes. The tissues stored as paraffin blocks represent an important source of DNA for retrospective genetic and epigenetic analysis on a large scale. Therefore, we developed the first capillary electrophoresis method able to measure global methylation in formalin-fixed, paraffin-embedded (FFPE) DNA extracts. A field-amplified sample injection capillary electrophoresis method with UV detection for the separation and quantification of cytosine and 5-methylcytosine released following DNA hydrolysis by means of formic acid was employed. Analytes were baseline-separated within 8 min by using 300 mM tris(hydroxymethyl)aminomethane phosphate pH 3.75 as the running buffer. With use of electrokinetic injection the limit of detection (LOD) in real sample was 0.1 nM, thus improving by about 400-fold the LOD of the previously described methods based on capillary electrophoresis. Sample extraction and purification were optimized so that evaluation of the DNA methylation degree was possible starting from 0.5-1 μg of DNA with intra- and interassay relative standard deviations for the 5-methylcytosine to total cytosine ratio of 2.0 and 3.2%, respectively. Because of its high accuracy and throughput, our method will be useful for large-scale applications to determine the implications of genomic DNA methylation levels in tumorigenesis.     

Polymer-coated synthetic fibers designed for miniaturized sample preparation process

Miniaturized sample preparation technique for complex sample matrices has been developed with a polymer-coated fibrous extraction medium. Several hundreds of fine fibrous materials were packed longitudinally into a fused-silica capillary followed by a polymeric coating on it to prepare the extraction capillary. The extraction capillary was installed in a liquid chromatograph as a sample loop of the injection valve. The on-line coupled sample preparation/separation system demonstrated a good validity for the analysis of phthalates in real river and wastewater samples. The lowest limits of quantification for several phthalates were less than 1 ng/ml. The effect of polymeric coating to the filaments on the extraction power was also investigated.     

Determination of urinary 8-hydroxy-2′-deoxyguanosine by capillary electrophoresis with molecularly imprinted monolith in-tube solid phase microextraction

<正>Urinary 8-hydroxy-2'-deoxyguanosine(8-OHdG) is an excellent marker of oxidative DNA damage.In this study,employing guanosine as dummy template a novel molecularly imprinted(MIP) monolithic capillary column had been synthesized,and that was used as medium of in-tube solid phase microextraction(SPME).Coupled with capillary electrophoresis-electrochemical detection(CE-ECD),the system of extraction and detection of 8-OHdG in urinary sample had been developed.Because of its greater phase ratio combined with convective mass transfer and inherent selectivity,the MIP monolithic column exhibited high extraction efficiency on target analyte with the limit of detection(LOD) and quantity(LOQ) reached 2.6 nmol/L(S/N = 3) and 8.6 nmol/L(S/N= 10),respectively.The linear range was from 10 nmol/L to 1.5μmol/L(r = 0.9999) with relative standard deviation(RSD) 3.7%for peak current,and 0.5%for migration time,and the average recovery of spiked 20-200 nmol/L 8-OHdG was 85%±3.5%(n = 6).This highly sensitive method was applied to analysis of 8-OHdG in urinary samples from healthy volunteers,coking plant workers and lung cancer patients.     

A novel automated device for rapid nucleic acid extraction utilizing a zigzag motion of magnetic silica beads

We report a novel automated device for nucleic acid extraction, which consists of a mechanical control system and a disposable cassette. The cassette is composed of a bottle, a capillary tube, and a chamber. After sample injection in the bottle, the sample is lysed, and nucleic acids are adsorbed on the surface of magnetic silica beads. These magnetic beads are transported and are vibrated through the washing reagents in the capillary tube under the control of the mechanical control system, and thus, the nucleic acid is purified without centrifugation. The purified nucleic acid is automatically extracted in 3 min for the polymerase chain reaction (PCR). The nucleic acid extraction is dependent on the transport speed and the vibration frequency of the magnetic beads, and optimizing these two parameters provided better PCR efficiency than the conventional manual procedure. There was no difference between the detection limits of our novel device and that of the conventional manual procedure.     

Development of miniaturized sample preparation with fibrous extraction media

Introducing fine polymeric filaments as the extraction medium, a miniaturized sample preparation technique for micro-column liquid chromatography (micro-LC) has been developed along with the investigation of a reproducible preparation scheme of the extraction capillary. The polymeric filaments were packed longitudinally into either a fused-silica capillary or a polyether ether ketone (PEEK) capillary of appropriate dimensions, and the extraction capillary was installed to the injection valve in micro-LC system. The number of packed filaments should be precisely counted before the packing process to make sure the reproducible preparation of the extraction capillary. With conventional stationary phase materials for open-tubular gas chromatography, polymeric coating to the surface of the filaments was also studied in order to further enhance the extraction performance and selectivity. Coated with the polymeric material suitable for the extraction of particular analyte, a dramatic improvement on the extraction power was obtained. The results suggest that the future possibility of novel tailored fibrous extraction medium with an appropriate coating on it, especially for the analysis of complex sample matrices.     

Poly(methacrylic acid-ethylene glycol dimethacrylate) monolith in-tube solid-phase microextraction applied to simultaneous analysis of some amphetamine derivatives in urine by capillary zone electrophoresis

A method based on in-tube solid-phase microextraction and capillary zone electrophoresis (CZE) was proposed for simultaneously determining four amphetamines (amphetamine, methamphetamine, 3,4-methylenedioxyamphetamine, and 3,4-methylenedioxymethamphetamine) in urine. A poly(methacrylic acid-ethylene glycol dimethacrylate) monolithic capillary column, which can provide sufficient extraction efficiency, was introduced for the extraction of amphetamines from urine samples. The hydrophobic main chains and acidic pendant groups of the monolithic column make it a superior material for extraction of basic analytes from aqueous matrix. After extraction, the samples were analyzed by CZE. The best separation was achieved using a buffer composed of 0.1 M disodium hydrogen phosphate (adjusted to pH 4.5 with 1 M hydrochloric acid) and 20% methanol v/v, with a temperature and voltage of 25 degrees C and 20 kV, respectively. By applying electrokinetic injection with field-amplified sample stacking, detection limits of 25-34 microg/L were achieved. Excellent method of reproducibility was found over a linear range of 0.1-5 mg/L. Determination of these analytes from abusers' urine sample was also demonstrated.     

In-tube solid phase microextraction using a beta-cyclodextrin coated capillary coupled to high performance liquid chromatography for determination of non-steroidal anti-inflammatory drugs in urine samples

A configuration of in-tube solid-phase microextraction (SPME) coupled to HPLC was constructed by using a pump and a six-port valve combined with a PEEK tube as the pre-extraction segment. The extraction capillary was fixed directly on the HPLC six-port valve to substitute for the sample loop. The whole system could be handled easily to perform accurate on-line extraction, and the possible inaccurate quantification caused by sample/mobile phase mixing when using an autosampler could be eliminated.A β-cyclodextrin coated capillary, prepared by sol-gel method, was used as the extraction capillary for in-tube SPME. Three non-steroidal anti-inflammatory drugs, ketoprofen, fenbufen and ibuprofen, were employed to evaluate the extraction performance of the capillary. After optimizing the extraction conditions, satisfactory extraction efficiency was obtained and detection limits for ketoprofen, fenbufen and ibuprofen in diluted urine samples were 38, 18 and 28 ng/mL, respectively. The extraction reproducibility was evaluated with intra-day and inter-day precision, and the R.S.D.s obtained were lower than 4.9 and 6.9%, respectively. The capillary was proved to be reusable and the extraction efficiency did not decrease after 250 extractions.     

Development of a real-world direct interface for integrated DNA extraction and amplification in a microfluidic device

Integrated DNA extraction and amplification have been carried out in a microfluidic device using electro-osmotic pumping (EOP) for fluidic control. All the necessary reagents for performing both DNA extraction and polymerase chain reaction (PCR) amplification were pre-loaded into the microfluidic device following encapsulation in agarose gel. Buccal cells were collected using OmniSwabs [Whatman?, UK] and manually added to a chaotropic binding/lysis solution pre-loaded into the microfluidic device. The released DNA was then adsorbed onto a silica monolith contained within the DNA extraction chamber and the microfluidic device sealed using polymer electrodes. The washing and elution steps for DNA extraction were carried out using EOP, resulting in transfer of the eluted DNA into the PCR chamber. Thermal cycling, achieved using a Peltier element, resulted in amplification of the Amelogenin locus as confirmed using conventional capillary gel electrophoresis. It was demonstrated that the PCR reagents could be stored in the microfluidic device for at least 8 weeks at 4 °C with no significant loss of activity. Such methodology lends itself to the production of 'ready-to-use' microfluidic devices containing all the necessary reagents for sample processing, with many obvious applications in forensics and clinical medicine.