PO43-掺杂Bi2O2CO3/Bi0的制备及其可见光催化性能

构建氧空位以及附着金属单质Bi(Bi⁰)是增强半导体材料光吸收性能、促进半导体光生载流子分离的有效方法。通过简单的共沉淀法及氢气热还原成功制备了PO₄^3-掺杂Bi₂O₂CO₃附着Bi⁰(Bi-P-BOC)的可见光催化剂,并对其在可见光下催化降解氧氟沙星(OFX)的性能及机理进行了研究。材料表征结果表明BOC随着PO₄^3-的均匀掺杂,可见光吸收能力增强,表面缺陷增多,比表面积增大。而随着氢气热还原,BOC表面形成Bi⁰的同时也原位构建了大量的氧空位。可见光催化性能测试表明,Bi-P-BOC可以在180 min内降解约85%的OFX,降解速率为0.013 0 min^-1,是BOC降解速率的8倍。Bi-P-BOC光催化降解机理表明其具有更好的可见光吸收能力,Bi⁰以及氧空位的存在促进了光生载流子的分离,h⁺是其...     

BiOI/Bi2WO6对甲基橙和苯酚的光催化降解及光催化机理

采用简单的沉积方法制备了不同碘化氧铋含量的BiOI/Bi₂WO₆光催化剂,通过X射线衍射(XRD)、扫描电子显微镜(SEM)、高分辨透射电子显微镜(HR-TEM)、紫外-可见漫反射光谱(UV-VisDRS)和BET比表面积测量对其进行了表征。在紫外和可见光的照射下,使用甲基橙和苯酚的光催化降解评价了BiOI/Bi₂WO₆催化剂的光催化性能。结果表明：与商业P₂₅和纯Bi₂WO₆相比,13.2%BiOI/Bi₂WO₆光催化剂具有更高的紫外和可见光催化性能。这明显增加的光催化活性主要归功于光生电子和空穴在Bi₂WO₆和BiOI界面上的有效转移,降低了电子-空穴对的复合。基于BiOI和Bi₂WO₆的能带结构,提出了光生载流子的一种转移过程。自由基清除剂的实验表明,OH,h⁺,O₂和H₂O₂,特别是h⁺,共同支配了甲基橙和苯酚的光催化降解过程。     

Highly efficient photocatalytic degradation for antibiotics and mechanism insight for Bi2S3/g-C3N4 with fast interfacial charges transfer and excellent stability

Bi₂S₃/g-C₃N₄ (BSCN) samples with different mass ratios of CN to BS were prepared by a facile and practicable hydrothermal method with 2D g-C₃N₄ nanosheets (CN). The microscopic morphology and structure of pure CN, BS and BSCN were measured by multiple testing methods. Analysis results show that the BSCN was prepared successfully, and the Bi₂S₃ nanoparticles closely and uniformly adhered to the surface of CN with sheet-like structure. The introduction of Bi₂S₃ did not change the structure of the CN. The results of the ultraviolet–visible spectroscopic analysis, photoluminescence spectra and electrochemical performance indicated that BSCN showed superior visible-light response compared with CN, and the separation and transfer efficiency of photogenerated carriers was significantly improved. With the decrease of mass ratio of CN/BS, the photocatalytic activity of BSCN initially increased and then decreased for 20 ppm of Rhodamine B solution (RhB), and the Bi₂S₃/g-C₃N₄-B with a mass ratio of 8:1 for CN to BS showed optimal photocatalytic performance (98.98%). Furthermore, the Bi₂S₃/g-C₃N₄-B exhibited apparent degradation effects (1.021 x10^-2, 0.879 x10^-2 and 0.793 x10^-2 min^?1) to three kinds of antibiotics (tetracycline, ciprofloxacin, and oxytetracycline). The BSCN samples still maintained higher degradation efficiency after five cycles of degradation to tetracycline. The capture experiments and the electron spin resonance (ESR) spectra analysis indicated that the h⁺ and ·O₂^? played a major role, and ·OH played secondary role during the photocatalytic reaction.     

Entrapment of Bi<Subscript>2</Subscript>O<Subscript>3</Subscript> nanoparticles in TiO<Subscript>2</Subscript> nanotubes for visible light-driven photocatalysis

In this study, we prepared nanoparticles of the visible light-responsive photocatalyst, Bi₂O₃ entrapped in anatase TiO₂ nanotubes (Bi₂O₃-in-TNTs) via a vacuum-assisted precursor-filling process followed by annealing. Owing to the unique tubular electronic structure of TiO₂ nanotubes, the interior of the nanotube is in an electron-deficient state, which was confirmed by XPS spectra and H₂-TPR. Electrochemical impedance studies showed that the Bi₂O₃-in-TNTs demonstrated a more efficient separation of photogenerated carriers than when Bi₂O₃ nanoparticles were deposited on the outer wall of TiO₂ nanotubes (Bi₂O₃-out-TNTs). Due to the confinement effect of TiO₂ nanotubes, which inhibits photogenerated carriers’ recombination, the Bi₂O₃-in-TNTs exhibited a better photocatalytic performance for the photo-degradation of methyl orange under visible light compared to Bi₂O₃-out-TNTs.     

In situ preparation of Bi2O3/(BiO)2CO3 composite photocatalyst with enhanced visible-light photocatalytic activity

A Bi₂O₃/(BiO)₂CO₃ (BO/BOC) composite photocatalyst was in situ prepared via calcinating (BiO)₂CO₃. The as-prepared Bi₂O₃/(BiO)₂CO₃ composites displayed enhanced photocatalytic activity for the degradation of RhB under visible light. The structure–activity relationship between catalyst structure and properties was investigated by SEM, XRD, XPS, FTIR, BET, DRS and photoelectrochemical tests. Apart from the increased absorption of visible light, the accelerated charge separation and transfer was achieved via the intimate contact and matched band structure between Bi₂O₃ and (BiO)₂CO₃. The formation of heterogeneous structures could promote the production of reactive oxygen species (·O₂^?) and eventually improve the photocatalytic performance for the removal of organic contaminants. This heating treatment strategy might be extended for improving light absorbance and charge carriers separation for other UV-based photocatalysts.

     

BiOI/Bi_2WO_6对甲基橙和苯酚的光催化降解及光催化机理(英文)

采用简单的沉积方法制备了不同碘化氧铋含量的BiOI/Bi2WO6光催化剂,通过X射线衍射(XRD)、扫描电子显微镜(SEM)、高分辨透射电子显微镜(HR-TEM)、紫外-可见漫反射光谱(UV-Vis DRS)和BET比表面积测量对其进行了表征。在紫外和可见光的照射下,使用甲基橙和苯酚的光催化降解评价了BiOI/Bi2WO6催化剂的光催化性能。结果表明:与商业P25和纯Bi2WO6相比,13.2%BiOI/Bi2WO6光催化剂具有更高的紫外和可见光催化性能。这明显增加的光催化活性主要归功于光生电子和空穴在Bi2WO6和BiOI界面上的有效转移,降低了电子-空穴对的复合。基于BiOI和Bi2WO6的能带结构,提出了光生载流子的一种转移过程。自由基清除剂的实验表明,·OH,h+,·O2-和H2O2,特别是h+,共同支配了甲基橙和苯酚的光催化降解过程。     

四角星形BiVO4/Bi2O3催化剂的制备及性能研究

采用水热法合成具有四角星形貌的钒酸铋,再将钒酸铋浸渍在碱溶液里二次水热,制备出BiVO₄/Bi₂O₃催化剂。采用X射线粉末衍射(XRD)、扫描电子显微镜(SEM),紫外-射(UV-Vis DRS)等方法征。可见光下,BiVO₄/Bi₂O₃复合物的光催化降解丹明B性能及光电优于纯BiVO₄。BiVO₄/Bi₂O₃复合材料形成了异质结构,有效抑制了光电子与空穴的复合效率。     

四角星形BiVO4/Bi2O3催化剂的制备及性能

采用水热法合成具有四角星形貌的钒酸铋,再将钒酸铋浸渍在碱溶液里二次水热,制备出BiVO_4/Bi_2O_3催化剂。采用X射线粉末衍射(XRD)、扫描电子显微镜(SEM),紫外-可见漫反射(UV-Vis DRS)等方法对样品进行表征。可见光下,BiVO_4/Bi_2O_3复合物的光催化降解罗丹明B性能及光电流响应均优于纯BiVO_4。这是由于BiVO_4/Bi_2O_3复合材料形成了异质结构,有效抑制了光生电子与空穴的复合效率。     

Advanced Bi<Subscript>2</Subscript>O<Subscript>2.7</Subscript>/Bi<Subscript>2</Subscript>Ti<Subscript>2</Subscript>O<Subscript>7</Subscript> composite film with enhanced visible-light-driven activity for the degradation of organic dyes

Bi₂O_2.7/Bi₂Ti₂O₇ composite photocatalyst films are synthesized by sol–gel dip-coating. The ratio of adding Bi and Ti precursors can be controlled during the preparation process. The phase structure is confirmed by X-ray diffraction. The UV–visible diffuse reflectance spectrum shows that the composite catalysts present light absorption in the visible region. The obtained Bi₂O_2.7/Bi₂Ti₂O₇ composite films possess superior photocatalytic degradation of rhodamine B, owing to the visible light response of Bi₂O_2.7 and the separation of photogenerated electrons and holes between the two components. As a result, the Bi₂O_2.7/Bi₂Ti₂O₇ (Bi/Ti = 1:1) displays the highest photocatalytic activity under visible light or UV light irradiation for the degradation of different organic dyes, including methyl blue, methyl orange and acid orange 7.     

Co doped ZnO nanowires as visible light photocatalysts

High aspect ratio cobalt doped ZnO nanowires showing strong photocatalytic activity and moderate ferromagnetic behaviour were successfully synthesized using a solvothermal method and characterized by scanning electron microscopy (SEM), X-ray powder diffraction (XRD), X-ray photoelectron spectroscopy (XPS), X-ray absorption spectroscopy (XAS), vibrating sample magnetometry (VSM) and UV–visible absorption spectroscopy. The photocatalytic activities evaluated for visible light driven degradation of an aqueous methylene orange (MO) solution were higher than for Co doped ZnO nanoparticles at the same doping level and synthesized by the same synthesis route. The rate constant for MO visible light photocatalytic degradation was 1.9·10⁻³ min⁻¹ in case of nanoparticles and 4.2·10⁻³ min⁻¹ in case of nanowires. We observe strongly enhanced visible light photocatalytic activity for moderate Co doping levels, with an optimum at a composition of Zn_0.95Co_0.05O. The enhanced photocatalytic activities of Co doped ZnO nanowires were attributed to the combined effects of enhanced visible light absorption at the Co sites in ZnO nanowires, and improved separation efficiency of photogenerated charge carriers at optimal Co doping.     

Formation of Mesoporous Heterostructured BiVO4/Bi2S3 Hollow Discoids with Enhanced Photoactivity

Semiconductor heterostructures are of great interest in a wide range of applications. In this work, we design and synthesize a novel heteronanostructure with controlled relative composition, i.e., BiVO₄/Bi₂S₃ hollow discoid‐like particles with mesoporous shell. The synthesis involves a facile anion exchange process by reacting pre‐synthesized BiVO₄ discoid‐like particles with Na₂S in an aqueous solution. Benefiting from the unique structural features and the formation of heterostructure, the as‐prepared BiVO₄/Bi₂S₃ hollow discoids exhibit significantly enhanced photoelectrochemical current response and photocatalytic activity for reduction of Cr^VI under visible‐light illumination.     

NiCo2O4/BiOCl/Bi24O31Br10 ternary Z-scheme heterojunction enhance peroxymonosulfate activation under visible light: Catalyst synthesis and reaction mechanism

The Z-scheme heterostructure for photocatalyst can effectively prolong the lifetime of photogenerated carriers and retain a higher conduction/valence band position, promoting the synergistic coupling of photocatalysis and peroxymonosulfate (PMS) activation. In order to fully utilize the luminous energy and realize the efficient activation of PMS, this work achieved successful construction of NiCo₂O₄/BiOCl/Bi₂₄O₃₁Br₁₀ ternary Z-scheme heterojunction by simultaneously synthesizing BiOCl and NiCo₂O₄ with NiCl₂ and CoCl₂ as the precursors. The intercalated BiOCl could serve as a carrier migration ladder to further achieve the spatial separation of electron-hole pairs, so that the oxidation and reduction processes separately occurred in different regions. Compared with the reported catalysts, the as-prepared composites exhibited the enhanced removal efficiency for tetracycline hydrochloride (TCH) in the visible light/PMS system, with a degradation efficiency of 85.30% in 2 min, and possessed good stability. Z-scheme heterojunction was shown to be beneficial for maximizing the superiority of photo-assisted Fenton-like reaction system. The experimental and characterization results confirmed that both non-radicals (¹O₂) and radicals (SO₅^?? and SO₄^??) were involved in the reaction process and the SO₅^?? generated by the oxidation of PMS played a crucial role in the TCH degradation. The possible reaction mechanism was finally proposed. This study provided new insight into the Z-scheme heterostructure to promote the photo-assisted Fenton-like reaction.     

Construction of a novel ZnCo2O4/Bi2O3 heterojunction photocatalyst with enhanced visible light photocatalytic activity

A novel ZnCo₂O₄/Bi₂O₃ heterojunction photocatalyst was prepared via balling method. The enhanced photocatalytic activity is mainly attributed to the broad photoabsorption and low recombination rate of photogenerated electron-hole pairs, which is driven by the photogenerated potential difference formed at the ZnCo₂O₄/Bi₂O₃ heterojunction interface.     

AgBi(WO4)2: A New Modification Material to Bi2WO6 for Enhanced and Stable Visible‐Light Photocatalyic Performance

In this work, we report a novel AgBi(WO₄)₂–Bi₂WO₆ heterostructure, which was designed and synthesized by using a simple hydrothermal method. Methyl orange was used as a representative dye indicator to evaluate the visible‐light catalytic activity and the catalytic mechanism was investigated. The as‐synthesized AgBi(WO₄)₂–Bi₂WO₆ composite displayed a 43 times higher photocatalytic activity than Bi₂WO₆. Owing to the matched band gap and distinctive heterostructure, AgBi(WO₄)₂–Bi₂WO₆ reveals a high visible‐light response and high‐efficiency utilization of both photogenerated electrons and holes. AgBi(WO₄)₂ reveals a similar energy level to and good lattice match with Bi₂WO₆, which are favorable qualities for band bending and fluent electron transfer. Furthermore, the photoexcited electrons can produce oxygen to generate ^.O₂^? radicals, which is vital for the overall utilization of both holes and electrons. This is the first example of AgBi(WO₄)₂ being used as photocatalytic material.     

Synthesis of Bi2WO6/Bi2O3 Composite with Enhanced Photocatalytic Activity by a Facile One‐step Hydrothermal Synthesis Route

In this study, the characterization and photocatalytic activity of Bi₂WO₆/Bi₂O₃ under visible‐light irradiation was investigated in detail. The results suggested that Bi₂WO₆/Bi₂O₃ can be synthesized by a facile one‐pot hydrothermal route using a super big 200 mL Teflon‐lined autoclave with optimal sodium oleate/Bi molar ratio of 1.25. Through the characterization of Bi₂WO₆/Bi₂O₃ by X‐ray diffraction, scanning electron microscopy, X‐ray photoelectron spectroscopy, Fourier transform infrared, UV‐vis diffuse reflectance spectra and Photoluminescence spectra, it was found that the as‐prepared composite possessed smaller crystallite size and higher visible‐light responsive than the pure Bi₂WO₆. Moreover, it was expected that the as‐prepared composites exhibited enhanced photocatalytic activity for the degradation of Rhodamine B under visible‐light irradiation, which could be ascribed to their improved light absorption property and the reduced recombination of the photogenerated electrons and holes during the photocatalytic reaction. In general, this study could provide a principle method to synthesize Bi₂WO₆/Bi₂O₃ with enhanced photocatalytic activity by one‐step hydrothermal synthesis route for environmental purification.     

Visible-light-driven heterostructure Ag/Bi2WO6 nanocomposites synthesized by photodeposition method and used for photodegradation of rhodamine B dye

Visible-light-driven heterostructure Ag/Bi₂WO₆ nanocomposites were prepared by transforming Ag⁺ ions into metallic Ag⁰ nanoparticles loaded on top of Bi₂WO₆ nanoplates under visible light irradiation for 1 h. XRD, XPS, SEM and TEM analyses indicated that spherical metallic Ag nanoparticles were uniformly dispersed on top of orthorhombic Bi₂WO₆ thin nanoplates. Rhodamine B (RhB) was used as a dye model for investigation of photocatalytic performance of Bi₂WO₆ nanoplates with different weight contents of Ag nanoparticles illuminated by visible radiation. In this research, 10% Ag/Bi₂WO₆ nanocomposites have the highest photocatalytic activity in the degradation of RhB at 94.21% within 210 min because of the rapid diffusion of electronic charge through the Schottky barrier between metallic Ag nanoparticles and Bi₂WO₆ thin nanoplates, good electrical conductivity of metallic Ag nanoparticles, inhibited recombination of charge carriers and enhanced photocatalytic activity of Ag/Bi₂WO₆ nanocomposites. Main active species of the photocatalysis and stability of the photocatalyst were also evaluated.

     

One-pot synthesis of peony-like Bi2S3/BiVO4(040) with high photocatalytic activity for glyphosate degradation under visible light irradiation

In this work, samples consisting of BiVO₄ with exposed (040) facets coupled with Bi₂S₃ (Bi₂S₃/BiVO₄) were prepared through a one-pot hydrothermal method, using ethylenediaminetetraacetic acid as directing agent and L-cysteine as sulfur source and soft template. X-ray diffraction, field emission scanning electron microscopy, and high-resolution transmission electron microscopy measurements indicated that the Bi₂S₃ content had a significant influence on the growth of (040) and (121) facets as well as on the morphology of the Bi₂S₃/BiVO₄ samples. When the Bi₂S₃ content reached 1 mmol, the Bi₂S₃/BiVO₄ samples exhibited a peony-like morphology. The results of transient photocurrent tests and electrochemical impedance spectroscopy measurements confirmed that a more effective charge separation and a faster interfacial charge transfer occurred in Bi₂S₃/BiVO₄ than BiVO₄. The enhanced photocatalytic activity of the Bi₂S₃/BiVO₄ samples could be attributed to the improved absorption capability in the visible light region and the enhanced electron-hole pair separation efficiency due to the formation of the Bi₂S₃/BiVO₄ heterostructure. In addition, the Bi₂S₃/BiVO₄ samples showed relative stability and reusability. The simple method presented in this work could be used to fabricate composite photocatalysts with high activity for different applications, such as photocatalytic degradation of organic pollutants, photocatalytic splitting of water, and photocatalytic reduction of carbon dioxide.     

铁电极化对层状Bi2MoO6光催化性能的增强

通过对铁电光催化剂Bi_2MoO_6和聚甲基丙烯酸甲酯(PMMA)构建的有机-无机复合膜材料施加电场极化,来探究铁电极化对Bi_2MoO_6光催化剂活性提升的影响。未极化的Bi_2MoO_6在光照40 min时降解罗丹明B(RhB)的效率为57.6%,在光照150min时对双酚A(BPA)的降解效率为33.4%。在15 V电压下极化1.5 h的Bi_2MoO_6材料在相同条件下降解罗丹明B和双酚A的效率分别达到98.1%和79.2%,光催化活性得到了较大的提升。光催化活性提升的原因归因于内部电场的增强。未极化的Bi_2MoO_6的内电场的铁电畴是无序、分布不均匀的,光生载流子非常容易发生体内复合。当外加电场极化Bi_2MoO_6时,Bi_2MoO_6的铁电畴趋于有序,极化方向趋于同一方向,表面一侧(C+区)产生正电荷,在另一侧(C-区)产生负电荷,从C-区指向C+区的极化电场推动光生电子和空穴分别迁移到C+和C-区域。这一过程促使光生电荷载流子快速从体内迁移至表面,提高和延长了光生载流子的分离效率和寿命,导致光催化活性的提升。     

Designed Construction of SrTiO3/SrSO4/Pt Heterojunctions with Boosted Photocatalytic H2 Evolution Activity

Efficient separation of photogenerated electron–hole pairs is a crucial factor for high-performance photocatalysts. Effective electron–hole separation and migration could be achieved by heterojunctions with suitable band structures. Herein, a porous SrTiO₃/SrSO₄ heterojunction is prepared by a sol-gel method at room temperature followed by an annealing process. XRD characterization suggests high crystallinity of the heterostructure. A well-defined interface between the two phases is confirmed by high-resolution (HR)TEM. The photocatalytic H₂ evolution productivity of the SrTiO₃/SrSO₄ heterojunction with Pt as co-catalyst reaches 396.82 μmol g⁻¹ h⁻¹, which is 16 times higher than that of SrTiO₃/Pt. The boosted photocatalytic activity of SrTiO₃/SrSO₄/Pt can be ascribed to the presence of SrSO₄, which promotes the transfer and migration of photogenerated carriers by forming the heterojunction and porous structure, which provides a large amount of active sites. This novel porous heterostructure brings new ideas for the development of high-efficiency photocatalysts for H₂ release.     

CeTiO4/g-C3N4复合材料的制备及其高效的光催化染料降解性能

采用简单固相法成功制备了CeTiO₄/g?C₃N₄?x(CTO/CN?x,x g为g?C₃N₄的添加量)复合材料,并通过X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、X射线光电子能谱(XPS)、N₂吸附-脱附测试、紫外可见吸收光谱(UV?Vis)及电化学测试对材料进行表征。研究发现:CeTiO₄与g?C₃N₄层状纳米片紧密复合,并成功构建了界面异质结结构;形成CTO/CN?x复合相的光催化材料具有良好的可见光光响应性能,且光生空穴-电子对的分离和迁移率明显提高;通过太阳光模拟不同样品光催化降解有机污染物罗丹明B,降解140 min后复合材料CTO/CN?6表现出最高的光催化活性,反应速率常数为0.0202 min^-1。其活性增强的主要原因是异质结结构的构筑降低了CTO光生载流子的复合几率,提高了光生载流子的迁移速率。