Temperature-reversible ultrathin films of N-isopropylacrylamide terpolymer adsorbed at the solid-liquid interface

This article describes the stability and reversibility of ultrathin films of N-isopropylacrylamide (NIPA)-vinylimidazole (VI)-poly(ethylene glycol) (PEG) graft terpolymer adsorbed at the solid-liquid interface upon temperature cycling from below to above its phase transition temperature. The coil-to-globule and globule-to-coil phase transitions were captured by in situ fluid tapping atomic force microscopy (AFM). The film thickness of 1 nm was determined by AFM, X-ray photoelectron spectroscopy, and X-ray reflectivity. The concentration required to reach full coverage was found to be higher when adsorption occurred below the phase transition temperature. From 23 to 42 degrees C, the adsorbed NIPA terpolymer film was observed to be molecularly smooth, corresponding to the close-packed structure of flexible polymer coils. Particles containing between one and a few globules appeared abruptly at the interface at 42-43 degrees C, the same temperature as the solution phase transition temperature, which was determined by dynamic light scattering. The size of the particles did not change with temperature, whereas the number of particles increased with increasing temperature up to 60 degrees C. The particles correspond to the collapsed and associated state of the globules. The film morphological changes were found to be reversible upon temperature cycling. Subtle differences were observed between dip-coated and spin-coated films that are consistent with a higher degree of molecular freedom for spin-coated films. The study contributes to the fundamental understanding and applications of smart ultrathin films and coatings.     

Atomic Force Microscopy of freely suspended liquid crystal films transferred to octadecyltriethoxysilane self-assembled monolayers

Thin freely suspended films of 4-(2-methylbutyl)phenyl 4'-octylbiphenyl-4-carboxylate (8SI) in the smectic C phase were transferred to self-assembled monolayer coated glass and imaged by atomic force microscopy. Upon rapid cooling to room temperature, the smectic C quenches into a lamellar phase, exhibiting islands and single smectic layer steps. The surface of such films can be imaged with molecular resolution, revealing a partially disordered lattice of fixed molecular positions. Over a period of several days these films undergo a transition to a crystal phase having a different film morphology.     

Atomic Force Microscopy of freely suspended liquid crystal films transferred to octadecyltriethoxysilane self-assembled monolayers

Thin freely suspended films of 4-(2-methylbutyl)phenyl 4'-octylbiphenyl-4-carboxylate (8SI) in the smectic C phase were transferred to self-assembled monolayer coated glass and imaged by atomic force microscopy. Upon rapid cooling to room temperature, the smectic C quenches into a lamellar phase, exhibiting islands and single smectic layer steps. The surface of such films can be imaged with molecular resolution, revealing a partially disordered lattice of fixed molecular positions. Over a period of several days these films undergo a transition to a crystal phase having a different film morphology.     

微纳米VO2膜层高温相变原位X射线衍射测试方法研究

通过设计、自制加热样品台结合商业X射线衍射仪的小角掠入射衍射模式,开发了微纳米膜层的原位高温相变测试方法,解决了样品表面微纳米膜层材料（厚度 < 10 μm）的高温相变难以原位测量的问题.研究了样品台与膜层表面的温度分布特征,验证了自制加热样品台的控温效果,原位测试了不同温度下二氧化钒（VO₂）膜层的X射线衍射图谱,揭示了VO₂膜层的高温相变行为.     

Influence of the order parameter and of the director orientation on the surface tension of free nematic films

A radial hydrodynamic flow in the nematic phase of free, suspended cylindrical films of 4-n-heptyl- and decyloxybenzoic acid and in 4,4'-di-n-heptyl-oxyazoxybenzene has been observed. The flow starts about 7°C before the phase transition into the smectic C phase. Under the same experimental conditions such a hydrodynamic flow is not established in free nematic films of 4-n-heptyl-and octyloxy-4'-cyanobiphenyl, 4,4'-dimethoxyazoxybenzene and N-(4-ethoxybenzylidene)-4'-n-butylaniline after the completion of the transition from the isotropic liquid to the nematic phase. The observed hydrodynamic flow is explained by a non-linear temperature dependence of the surface tension.     

偏氟乙烯-四氟乙烯共聚物高取向薄膜的形态结构研究

聚偏氟乙烯(PVF₂)至少有四种晶相结构,即α、β、γ和δ相,PVF₂的压电性和热电性直接依赖其β相结构。 本工作报导以特殊的熔体拉伸方法制备不同组成偏氯乙烯(VF₂)和四氟乙烯(VF₄)的共聚物高取向薄膜与对其结构的研究结果。     

Phase transition properties of vanadium oxide films deposited by polymer-assisted deposition

Vanadium dioxide (VO₂) films were synthesized on mica substrates by a polymer-assisted deposition method, followed by rapid annealing with different annealing temperatures. The crystalline structure and morphology of the films were investigated by XRD and FE-SEM, and their phase transition properties were studied by in situ FT-IR. The results indicated that the annealing temperature affected the crystalline structure and morphology of the films remarkably, which then resulted in varied phase transition properties. In particular, the films annealed at higher temperature showed more polycrystalline structure, increased particle size and reduced phase transition intensity. But the films exhibited the similar hysteresis temperature width with increasing annealing temperature.     

Structural phase transition in ultrathin films of disk-shaped molecules

We have used grazing-incidence X-ray diffraction and atomic force microscopy to study Langmuir-Blodgett films of 2-(3-hydroxypropyl)oxy-3,6,7,10,11-pentapentyloxytriphenylene, a disk-shaped molecule which also forms a bulk liquid crystalline columnar phase. Upon heating, we observe a phase transition from a low symmetry ordered crystalline structure to a high temperature liquid crystal. The transition is reversible, with considerable hysteresis.     

Effect of the synthetic procedure on the properties of thin films of liquid crystals

Liquid-crystal films prepared by different procedures and having different thicknesses were studied. A structural phase transition was found in these films at ～75°C. The nature of this transition was examined by investigating the temperature dependences of the electric capacity and conductivity of the films; the optical absorption and reflection spectra were also studied. It was concluded that the samples contained a ferroelectric phase. The structure of the films was studied by atomic force microscopy. As a result of the structural studies, the peculiarities of the temperature dependences of conductivity and capacity, in particular, the temperature range in which the phase transition was observed were explained.     

Characterization of Langmuir-Blodgett films of a ferroelectric liquid crystal

Molecular orientation, structure, and phase transition behaviors in Langmuir-Blodgett (LB) and cast films of a ferroelectric liquid crystal of sec-butyl 6-(4-(nonyloxy)benzoyloxy)-2-naphthoate (FLC-1) are determined by ultraviolet (UV) spectroscopy, X-ray diffraction, and infrared (IR) spectroscopy. It is found that the orientation angle of chromophores theta in LB films is 41 degrees from the surface normal. The tilt angle of the chromophore changes at 56, 70, and 88 degrees C, respectively, which denotes the presence of phase transitions. Two kinds of layered or isomeric crystal structures of the LB films with layer spacings of 3 and 3.5 nm at room temperature have been found while the latter disappears above 45 degrees C, as confirmed by measurement of temperature-dependent IR spectra.     

聚苯乙烯/聚二甲基硅氧烷嵌段共聚物的表面形态研究

采用原子力显微镜(AFM)和透射电镜(TEM)研究了聚苯乙烯/聚二甲基硅氧烷嵌段共聚物(PS-b-PDMS)薄膜的相形态.结果表明,当采用甲苯作为溶剂,旋转涂膜的薄膜样品呈现网络状的形态分布在表面,而样品所对应的透射电镜照片中,PDMS相作为球状分布在PS的连续相中.退火温度对共聚物表面形态有一定的影响,当退火温度高于PDMS的玻璃化温度,表面中PDMS相增多.PS-b-PDMS嵌段共聚物的表面形态随着所用溶剂的变化而有所不同,当采用甲苯作为溶剂时,样品的PS相形成凹坑分布在PDMS的相区之中,而采用环己烷作为溶剂时,PS相作为突起分布在PDMS相区之中.另外,基底对共聚物薄膜表面形态的有较大的影响,当采用硅晶片作为基底时,样品中的PDMS相和PS相呈现近似平行于表面的层状结构.     

High Resolution Tip Enhanced Raman Mapping on Polymer Thin Films

Advanced tip enhanced Raman mapping (TERM) was applied to high resolution chemical identification on nanoscale. Thin poly(methyl methacrylate)/poly(styrene acrylonitrile) (SAN28/PMMA) blend films were measured at different stages of phase separation. New insights into the phase evolution behavior of the thin films were obtained, when the TERM images were compared. An unexpected morphology transition was observed after a few minutes annealing at 250 °C. No surface enrichment of PMMA was observed, differing from the previous reports on a similar well-studied system of SAN33/PMMA. The glass transition temperature, the surface and interfacial tension were found to be the main factors responsible for the phase evolution behavior of SAN28/PMMA films.     

Segregation and phase transition in mixed lipid films

Energy dispersion X-ray diffraction (EDXD) was applied to investigate the structure of partly dehydrated mixed films formed by the phospholipid dimyristoyl phosphatidylcoline (DMPC) and any of the three diastereomers of the dicationic gemini surfactant (2S,3S)-2,3-dimethoxy-1,4-bis(N-hexadecyl-N,N-dimethylammonium) butane dibromide. As the surfactant to lipid molar ratio (R(S/L)) increases, the gemini monotonically solubilizes the lipid bilayer promoting the formation of a cubic phase of space group Pmn segregating from the residual lamellar phase of the lipid. Finally, at R(S/)(L) = 1, the phase transition is complete. The mixed film at the highest surfactant to lipid molar ratio (R(S/L) = 2.3) was hydrated by a vapor saturated atmosphere. At full hydration, a cubic to lamellar phase transition occurs. Coarse grain dynamic investigations, carried out as a function of both the surfactant to lipid molar ratio and the number of water molecules for amphiphile unit, allowed us to elucidate the structure of the emerging cubic phase and the hydration-induced structural pathway of the cubic to lamellar phase transition observed by EDXD.     

芳香席夫碱衍生物在有序分子膜中的相行为与二维-三维形变

研究了芳香席夫碱的设计合成、界面相行为以及与铜离子的配位过程,并与离位合成的铜复合物的界面组装行为进行了对比.利用表面压-面积等温线、紫外光谱、红外光谱、原子力显微镜等一系列实验方法来详细表征组装膜.结果表明,席夫碱配体与铜复合物均可在气液界面上形成稳定的有序组装膜,并可以转移到固体基片上构筑多层膜.进而,席夫碱配体在纯水界面上表现出奇特的相变.在相变点前后,二维的平膜变化成了三维的纤维状组装结构.然而,对于铜离子亚相上的组装过程却没有出现较大的变化.两者之间明显的差异可归因于在气液界面超分子组装过程中的分子构型以及疏水性能的不同引起的.目前的工作为制备和调控有序组装膜提供了有益探索.     

Influence of the order parameter and of the director orientation on the surface tension of free nematic films

Abstract

A radial hydrodynamic flow in the nematic phase of free, suspended cylindrical films of 4-n-heptyl- and decyloxybenzoic acid and in 4,4′-di-n-heptyl-oxyazoxybenzene has been observed. The flow starts about 7°C before the phase transition into the smectic C phase. Under the same experimental conditions such a hydrodynamic flow is not established in free nematic films of 4-n-heptyl-and octyloxy-4′-cyanobiphenyl, 4,4′-dimethoxyazoxybenzene and N-(4-ethoxybenzylidene)-4′-n-butylaniline after the completion of the transition from the isotropic liquid to the nematic phase. The observed hydrodynamic flow is explained by a non-linear temperature dependence of the surface tension.     

Direct electron transfer for hemoglobin in biomembrane-like dimyristoyl phosphatidylcholine films on pyrolytic graphite electrodes

Stable thin films made from dimyristoyl phosphatidylcholine (DMPC) with incorporated hemoglobin (Hb) on pyrolytic graphite (PG) electrodes were characterized by electrochemical and other techniques. Cyclic voltammetry (CV) of Hb-DMPC films showed a pair of well-defined and nearly reversible peaks at about -0.27 V vs. saturated calomel electrode (SCE) at pH 5.5, characteristic of Hb heme Fe(III)/Fe(II) redox couple. The electron transfer between Hb and PG electrodes was greatly facilitated in DMPC films. Apparent heterogeneous rate constants (ks) were estimated by fitting square wave voltammograms of Hb-DMPC films to a model featuring thin layer behavior and dispersion of formal potentials for redox center. The formal potential of Hb heme Fe(III)/Fe(II) couple in DMPC films shifted linearly between pH 4.5 to 11 with a slope of -48 mV pH-1, suggesting that one proton is coupled to each electron transfer in the electrochemical reaction. Soret absorption band positions suggest that Hb retains a near native conformation in DMPC films at medium pH. Differential scanning calorimetry (DSC) showed the phase transition for DMPC and Hb-DMPC films, suggesting DMPC has an ordered multibilayer structure. Trichloroacetic acid (TCA) was catalytically reduced by Hb-DMPC films with significant decreases in the electrode potential required.     

Lyotropic and thermotropic phase transitions in films of ionene-alkyl sulfate complexes

Five [X,Y]-ionenes [(CH2)(X)N+(CH3)2(CH2)(Y)N+(CH3)2]nBr-(2n) were prepared (X = 3, 5; Y = 10, 12, 22). Using new preparation methods, dry, salt-free complexes with three n-alkyl sulfates (octyl, decyl, and dodecyl) were obtained. The ionenes and their complexes were characterized in methanol solution by light scattering, viscometry, and fluorescent probe studies. The solid materials were investigated by means of DSC, TG, and ATR-IR. Transparent films were formed from stoichiometric [3,10], [3,12], and [5,10]-ionene complexes with decyl and dodecyl sulfate. In the films, mesogenic phase transitions could be induced: dry films were optically isotropic; when exposed to elevated humidity, the films slowly became optically anisotropic because of a lyotropic transition to a hexagonal mesogenic phase. The relative humidity, at which the hexagonal phase developed, was distinct for each complex. The anisotropic phases were converted to isotropic in a thermotropic transition under controlled relative humidity at specific clearing temperatures, which were higher for dodecyl complexes than for decyl complexes. This thermotropic isotropic-anisotropic transition could be cycled several times, but partial hydrolysis of the alkyl sulfates reduced the reproducibility of transition points.     

Study of a plasticized‐unoriented P(VF2/VF3) (73/27 mol%) copolymer. I. The effects of crystallization conditions on morphology,physical, and thermal properties

The results of a study on the effects of a plasticizer, tricresyl phosphate, on the mechanical and thermal properties of unoriented films of poly(vinylidene fluoride–trifluoroethylene) (VF₂/VF₃) copolymer (73/27 mol%) are presented. Films were prepared by both quenching and slow‐cooling from the melt with plasticizer concentrations of 0, 5, and 10% by weight. For the slow‐cooled films, a reduction in crystallinity by 25% was observed for the heavily plasticized films, together with a reduced dynamic mechanical modulus (≈ 58%) and an increased dielectric constant (≈ 200%). For the quenched films, a small increase in crystallinity was observed together with a reduced modulus and an increased dielectric constant. Measurements of the temperature dependence of the modulus and dielectric constant at 10 Hz. were also carried out from −100°C to 100°C. This data showed that for slow‐cooled films the glass transition temperature decreased from −28°C to ‐52°C at the highest doping level. DSC thermal analysis shows a decrease in the Curie transition (≈ 4°C) and melting temperatures (≈ 9°C) for the quenched films, while the slow‐cooled films only showed a decrease in melting temperature (≈ 10°C), while the Curie transition temperature was unaffected. In addition, evidence of a two‐phase system or a nonferroelectric crystal phase is noted by the presence of two Curie transition temperature peaks. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 19–28, 1999     

An atomic force microscope study of thermal behavior of phospholipid monolayers on mica

We observed by using atomic force microscope (AFM) phospholipid (1,2-dipalmitoyl-sn-glycero-3-phosphocholine) monolayers on mica being annealed and cooled to a selection of temperatures through steps of 2-4 degrees C/min. The annealed phospholipid monolayers started to disappear at 45-50 degrees C and disappeared completely above 60-63 degrees C under AFM observation. The phospholipid monolayers reformed when the samples were cooled below 60 degrees C and developed from fractal into compact monolayer films with decreasing temperatures. Simultaneously the height of the reformed phospholipid films also increased with decreasing temperatures from 0.4 nm to the value before annealing. The observed thermal features are attributed to a phase-transition process that upon heating to above 45-50 degrees C, the lipids condensed in the monolayers transform into a low-density expanded phase in which the lipids are invisible to AFM, and the transformation continues and completes at 60-63 degrees C. The lipid densities of the expanded phase inferred from the dissociated area of the condensed phase are observed to be a function of the temperature. The behavior contrasts with a conventional first-order phase transition commonly seen in the Langmuir films. The temperature-dependent height and shape of the reformed phospholipid films during cooling are argued to arise from the adjustment of the packing and molecular tilting (with respect to the mica surface) of the phospholipids in order to accommodate more condensed phospholipids.     

Electric-field-induced antiferroelectric to ferroelectric and ferroelectric to paraelectric phase transition at various temperatures in (Pb,La)(Zr,Ti)O<Subscript>3</Subscript> antiferroelectric thick films

(Pb, La)(Zr, Ti)O₃ antiferroelectric thick films with (100)-preferred orientation were fabricated on Pt(111)/Ti/SiO₂/Si(100) substrates via a sol–gel method. The electric-field-induced antiferroelectric (AFE) to ferroelectric (FE) phase transition characteristics were studied by C (capacitance)–E (electric field) measurements at different temperature. The films were in AFE state under 0 kV/cm below 122 °C, and the switching field values decreased, with increasing temperature. The films were in FE state between 122 and 135 °C, and when the temperature above 135 °C, the films were in PE state. The temperature-dependent dielectric parameters were deconvoluted using a Gaussian fit multi-peaks showed that two typical phase transitions were discovered. The first peak is the AFE-to-FE phase transition and the second peak is the FE-to-PE phase transition which has been verified by C–E tests.