Influence of gas media on the thermal decomposition of second valence iron sulphates

FeSO₄·H₂O and FeSO₄ represent the second valence of iron sulphates. Number of studies has been done to understand formation of intermediate sulphates like FeOHSO₄ and Fe₂O(SO₄)₂, representing the oxidation of Fe²⁺ to Fe³⁺. At selected temperatures, both the thermo-dynamical equilibrium in the Fe–S–O system and the formation of the crystal structures in the solid phase are controlled by the partial pressure of water vapour and oxygen in the gas phase. The effects of the temperature and the partial pressure of gas components on the solid-phase content are demonstrated by phase diagrams. The study puts the accent on the influence of oxygen content in gas environment on processes of thermal decomposition of FeSO₄·H₂O and FeSO₄. At three quantities of oxygen content—0% (100% Ar), 21% (dry air) and 100% (pure O₂) the processes of oxidation and formatting metastable iron sulphates were examined by several experimental techniques. The thermal decomposition of samples was investigated by TG–DTG–DTA method in the temperature range 293–1400 K. Partial pressure of water vapour was determined by the quantity of water released from dehydration process of FeSO₄·H₂O. Infrared spectroscopy, Mössbauer spectroscopy and X-Ray powder diffraction method were used for identification of the new formed solid structures and for characterization of the content of the iron sulphates with different valencies of iron. The experimental data and their analyses give the possibility to determine the different stages of decomposition, related to the formation of intermediates. Depending on gas environment, the basic relationships for reaction kinetics is drawn. It is demonstrated on that correlation exists between the kinetic’s parameters and the content of oxygen in the gas phase.     

Identification and characterization of fenton oxidation products of surfactants by electrospray mass spectrometry and by solid phase microextraction gas chromatography mass spectrometry. 2. Fatty alcohol polyethoxy sulphates

The Fenton reaction for the degradation of surfactants has been investigated and partial degradation products have been identified and characterized by mass spectrometry for the case of fatty alcohol polyethoxy sulphates. The polar water-soluble products were investigated by liquid chromatography/mass spectrometry (LC/MS) with electrospray ionization (ESI), and the volatile products leaving the mixture during the reaction were trapped by means of solid phase microextraction (SPME) and investigated by gas chromatography/mass spectrometry (GC/MS) with electron and chemical ionization. The oxidation leads to the formation of products with hydroxyl and epoxide groups due to insertion of oxygen atoms or with terminal ethoxylic moieties deriving from the loss of the hydrophilic sulphate group. The formation of volatile aldehydes is also observed, corresponding to the fragmentation between hydrocarbon and ethoxylic chains. The extent of mineralization is dependent on peroxide and iron(II) concentrations. Copyright 2000 John Wiley & Sons, Ltd.     

六羟基化合物为骨架的高分子固-固相变材料的合成与性能

分别使用三种含6个羟基的化合物(山梨醇、双季戊四醇和肌醇)作为分子骨架,聚乙二醇(PEG)作为相变功能链,4,4'-二苯基甲烷二异氰酸酯(MDI)为交联剂,合成了3种具有不同交联结构的新型固-固相变储能材料。通过傅里叶变换红外光谱(FT IR)、X-射线衍射(XRD)、偏光显微镜(POM)、示差扫描量热法(DSC)和热重量分析法(TG)分别对合成材料的分子结构、结晶性能、相变行为和热稳定性进行了研究。结果显示,所制备的材料在30~70℃温度范围内具有典型的固-固相变特性,其升温和冷却过程的相变焓最高可达107.5J/g和102.9J/g。此外,通过热重分析发现所合成材料具有较好的可重复使用性和热稳定性。因此,合成的新型固-固相变材料在热能储存和控温领域具有巨大的应用潜力。     

Phase equilibria of the Mn---Fe---O system (Fe/Mn = 2)

Phase equilibria of the Mn---Fe---O system (Fe/Mn = 2) were studied in the temperature range 1223–1393 K and in oxygen partial pressure from 10⁻¹ to 10⁵ Pa by measuring the electrical conductivity and the weight of the sample. The standard enthalpy and entropy changes per one mole oxygen for the phase boundary reaction between spinel and spinel + hematite were calculated from thermogravimetric data. A slight break in the plots between the oxygen partial pressure and weight change at constant temperature was observed in the single phase of manganese ferrite, where the lattice constant also showed a break in the plots of lattice constant against oxygen partial pressure. The oxygen potentials were calculated by assuming that the break point in the plots between the oxygen partial pressure and weight change is the stoichiometric composition of manganese ferrite.     

A Novel Solid-Solid Phase Change Material Based on Poly(styrene-co-acrylonitrile) Grafting With Palmitic Acid Copolymers

(SAN-g-PA) as new solid-solid phase change materials (SSPCMs) were synthesized starting from poly(styrene-co- acrylonitrile) (SAN) and palmitic acid (PA). The chemical structure of the synthesized SAN-g-PA were characterized with Fourier transform infrared (FTIR), and Nuclear Magnetic Resonance (¹H-NMR), their thermal energy storage properties and thermal stability were investigated with differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA), respectively. Moreover, the crystalline morphology and crystal structures were also measured with polarized optical microscopy (POM) and X-Ray Diffraction (XRD). The result shows that the PA molecule was grafted onto the SAN, SAN-g-PA were obtained successfully. The crystalline morphology and crystal structures of the synthesized SAN-g-PA are different from palmitic acid and SAN. As novel SSPCMs, SAN-g-PA possess suitable phase transition temperature, the higher enthalpy value, and good heat stability.     

Calorimetric Investigation of Conversion to The Most Stable Subgel Phase of Phosphatidylethanolamine-water System

The conversion of either the gel or the liquid crystal phase to the most stable subgel phase in dimyristoylphosphatidylethanolamine (DMPE)-water system at a water content of 25 mass% was studied by differential scanning calorimetry and isothermal calorimetry. The calorimetric experiments were performed for two samples depending on whether the thermal treatment of cooling to -60°C was adopted or not. In DSC of varying heating rate, exothermic peaks due to the partial conversion were observed at either temperatures just below the gel-to-liquid crystal phase transition at 50°C or temperatures where the liquid crystal phase is present as a metastable state. The enthalpies of conversion for both the gel and the liquid crystal phase were measured directly by the isothermal calorimetries at 47 and 53°C, respectively, where the exothermic peaks were observed by DSC and were compared with the enthalpy difference between the gel and subgel phases and that between the liquid crystal and subgel phases. This revised version was published online in July 2006 with corrections to the Cover Date.     

Etude du comportement thermique des n-alcanes dans des milieux hydrocarbones complexes par analyse calorimetrique differentielle. I. Etude du comportement thermique des n-alcanes en programmation lineaire de temperature

Middle distillates contain various amounts of n-alkanes which are responsible for low temperature properties. The thermal behavior of 14 alkanes ranging from n-C₁₂H₂₆ to C₂₅H₅₂ has been studied by means of a Mettler TA 2000 B heat flow DSC. Different hydrocarbon matrices such as gas oil (diesel) where n-alkanes have previously been removed, kerosene and gas oil containing a known distribution of n-alkanes have been used. A comparative study of the values of the enthalpy of dissolution obtained for each n-alkane in a gas oil with or without a distribution of n-alkanes has been carried out.     

Analysis of decomposition processes of ausferrite in copper–nickel austempered ductile iron

Analysis of thermal decomposition processes of the ausferrite obtained during simulation of austempering heat treatment was performed on austempered ductile iron (ADI). The analysis method consisting in investigation of inverse phase transformations was applied. The material with specified phase composition and well-defined thermophysical properties, both resulting from the conducted heat treatment cycle, was heated under controlled conditions and the thermal effects—enthalpy change and volume change were recorded by means of differential scanning calorimetry (DSC) and differential dilatometry. The process of ausferrite decomposition in the range of 100–800 °C was discussed; the identification scheme and temperature sequence of phase transformations accompanying the ausferrite decomposition were established. The elaborated decomposition scheme allows selection of the ADI heat treatment and its optimization by means of the non-isothermal thermal analysis methods.     

Structural, physico-chemical, thermal and pasting properties of potato (Solanum tuberosum L.) flour

In this work, two varieties of potato flour (Ágata and IAPAR Cristina) were studied by simultaneous thermogravimetry–differential thermal analysis (TG–DTA), differential scanning calorimetry (DSC), rapid viscoamylographic analysis (RVA), and microscopy (NC-AFM) that were compared with conventional physico-chemical analysis, according different granulometry of each flour. Flours of IAPAR Cristina showed higher levels of starch, fiber, and phosphate and it showed higher thermal stability (TG–DTA), as well as higher pasting temperature and viscosity (RVA), and lower enthalpy of gelatinization (DSC) in the two granulometries. Flours of Agata showed higher gelatinization enthalpy (DSC) and lower pasting temperature (RVA). Atomic force microscopy—non contact method (NC-AFM), was important to check for protrusions and pores of the flour surfaces. The differences between cultivars can be attributed mainly to the genotypes and growth conditions of the tubers, which can modify the flour properties.     

Preparation and characterization of pentaerythritol/butane tetracarboxylic acid/polyethylene glycol crosslinking copolymers as solid-solid phase change materials

Pentaerythritol/butane tetracarboxylic acid/polyethylene glycol (PBPEG) crosslinking copolymers as a novel solid-solid phase change material (SSPCM) were successfully synthesized through the reaction mechanism and conditions of hydroxyl-carboxyl condensation reaction. The composition and chemical structure, crystalline properties, phase change behaviors, thermal reliability and chemical stability of PBPEG crosslinking copolymers were investigated by Fourier transform infrared spectroscopy (FT-IR), wide-angle X-ray diffraction (WAXD), polarization optical microscopy (POM), differential scanning calorimetry (DSC), and thermogravimetry (TGA), respectively. The results show that PBPEG crosslinking copolymers have typical solid-solid phase transition temperatures in the range of 10.31～53.27°C and high latent heat enthalpy in the range of 89.6～102.8 J/g, the synthesized SSPCMs have good thermal reliability and chemical stability after 300 thermal cycles, and PBPEG crosslinking copolymers have good thermal stability before 364°C. In summary, the synthesized PBPEG crosslinking copolymers could be potentially used for thermal energy storage.     

Calculation of isentropic compressibility and sound velocity in two-phase fluids

Derivative properties from equations of state (EoS) are well defined for homogeneous fluid systems. However, some of these properties, such as isothermal and isentropic (or adiabatic) compressibilities and sound velocity need to be calculated at conditions for which a homogeneous fluid splits into two (or more) phases, liquid or vapor. The isentropic compressibility and sound velocity of thermodynamically equilibrated fluids exhibit important discontinuities at phase boundaries, as noticed long ago by Landau and Lifschitz in the case of pure fluids. In this work, the two-phase isentropic compressibility (or inverse bulk modulus) is expressed in terms of the two-phase isothermal compressibility, two-phase thermal expansivity and an apparent heat capacity, defined as the partial derivative of total enthalpy with respect to temperature at constant pressure and composition. The proposed method is simple (simpler than previous approaches), easy to implement and versatile; it is not EoS-dependent and it requires only a flash routine and the expression of total enthalpy at given pressure, temperature and composition. Our approach is applied to a variety of fluid systems representative of reservoir applications and geophysical situations, including petroleum fluids (oil and gas condensate) and mixtures of water and gas (methane or CO₂). For low gas content in the two-phase fluid, i.e., near bubble point conditions, we obtain significantly lower bulk moduli and sound velocities than predicted within Wood's conventional approach, in which the liquid and gas phases are considered to be “frozen” at the passage of the acoustic wave.     

环二硅氮烷-聚硅氧烷共聚物高温气相色谱固定相的研究

含苯基的环二硅氮烷聚硅氧烷共聚物(TMCDPS)主链上含有刚性结构,具有良好的耐热性能。将此材料用作毛细管气相色谱固定相,考察该固定相的柱效、极性、热稳定性,并对石蜡、聚乙烯裂解产物、原油等样品进行色谱分析。实验结果表明:该固定相有着良好的分离效果,属于中等极性固定相,其最为突出的特点就是在聚硅氧烷主链上引入大分子基团,使得其耐温性能大大提高,温度达到400℃时,柱流失量依然不高。     

Calorimetry and thermogravimetry as tools for the assessment of the thermal stability of polyoxide-based nonionic surfactants

Differential scanning calorimetry (DSC) and thermogravimetry (TGA) have been used to evaluate the thermal stability of nonionic surfactants. We have studied monofunctional diblock copolymers of poly(ethylene oxide-propylene oxide) (R-PEO–PPO–OH, where R length is linear C₄ or C_12–14) as nonionic surfactants. It was observed that the thermal stability was dependent on the copolymer structure. Moreover, the higher the EO/PO ratio in the copolymers the higher the oxidative thermal stability. The autoxidation exhibits exothermic behaviour and the enthalpy related to the process depends on the EO/PO ratio. The initial temperatures of degradation obtained from DSC and TGA were in agreement.     

Particle size effects on the thermal behavior of hematite

Hematite with different particle sizes was obtained through isothermal annealing and mechanochemical ball-milling methods. The hematite phase is very stable under air atmosphere. The thermal stabilities of hematite under argon atmosphere were characterized by thermal analysis studies up to 800 °C using a simultaneous DSC–TG technique. The lattice parameters a and c of hematite with different particle sizes were extracted from the Rietveld structural refinement of powder X-ray diffraction patterns. Decomposition of hematite into a lower oxidation state in inert argon atmosphere was studied by the TG experiments for the first time and the enthalpy associated with the decomposition reaction was determined from the DSC studies. Particle size has a strong effect on the thermal behavior of hematite samples. Ball-milled hematite samples with smaller particle size showed that the phase transformation was extended to higher temperature range with larger enthalpy. Hematite with larger average particle size showed higher stability under argon atmosphere.     

The silver-oxygen system in catalysis: new insights by near ambient pressure X-ray photoelectron spectroscopy

We addressed the interaction of oxygen with silver by synchrotron based near ambient pressure X-ray photoelectron spectroscopy at temperatures relevant for industrial oxidation reactions performed with silver catalysts. For silver single crystals, polycrystalline foils and powders in equilibrium with gas phase O(2), we observed the dynamics of the formation of five different atomic oxygen species with relative abundances depending on the temperature and time. Correlation of their formation kinetics with spectroscopic features and thermal stability indicates that these are distinct species with different electronic structures, which might relate to the different roles of silver in oxidation reactions.     

Mechanism and kinetics of inorganic sulphates decomposition

Thermal decomposition of different inorganic sulphates are presented. A number of techniques, but mainly TG and DTA, are used to prove the mechanism and kinetics of CaSO₄, BaSO₄, FeSO₄·xH₂O, Al₂(SO₄)₃·xH₂O under various gas atmospheres. It is shown how the partial pressure of gas components and heating rate may effect the mechanism and kinetic parameters. There are also examples on the effects of some additives and initial treatment on the thermal processes. On the base of the results obtained some recommendations are given concerning the precautions to be taken into account in the thermal decomposition studies and the sulphur recovering.     

Synthesis and thermal properties of poly(styrene-co-acrylonitrile)-graft-polyethylene glycol copolymers as novel solid–solid phase change materials for thermal energy storage

A novel poly(styrene-co-acrylonitrile)-graft-polyethylene glycol(SAN-g-PEG) copolymer was synthesized as new solid–solid phase change materials(SSPCMs) by grafting PEG to the main chain of poly(styrene-co-acrylonitrile). The chemical structure of the SAN-g-PEG was confirmed by the Fourier transform infrared(FT-IR) and proton nuclear magnetic resonance(1H NMR) spectroscopy techniques. The thermal energy storage properties and the storage durability of the SAN-g-PEG were investigated by differential scanning calorimetry(DSC). The SAN-g-PEG was endowed with the solid–solid phase transition temperatures within the range of 23–36 8C and the latent heat enthalpy ranged from 66.8 k J/kg to 68.3 k J/kg. Thermal cycling tests revealed that the SAN-g-PEG kept great heat storage durability after 1000 thermal cycles. The thermal stability was evaluated by a thermal gravity analysis(TGA), and the initial decomposition temperature(Td) of SAN-g-PEG is 350 8C, which proves that the SAN-g-PEG possessed good thermal stability.     

A new series of materials containing basic sulphates of iron(III)

Series of basic sulphates which were precipitated by the hydrolysis of Fe(OH)SO₄ in the presence and absence of metallic iron were studied from compositional, crystallographic and thermal decomposition points of view. The results are presented and discussed. It was found that high pure iron oxides as well as high grade red iron oxide pigments can be obtained by agitating the basic sulphates in hot ammonical medium followed by roasting. Commercial exploitation of the results is suggested.Left the laboratory to settle in domestic life.The authors are thankful to the Director, Prof. H. S. Ray for his kind permission to publish the results. One of us (SM) is also thankful to the Council of Scientific and Industrial Research, New Delhi, for the award of a Senior Fellowship.     

Effects of medium and chemical modification on thermal characteristics of Β-lactoglobulin

The thermal properties of -lactoglobulin (-LG) were studied by differential scanning calorimetry (DSC) under different medium conditions.pH, neutral salts, protein perturbants, and polyols all affected the DSC characteristics of -LG. Acylation with fatty acids also changed the thermal properties, particularly peak width at half-height. The results suggest that the structural stability of -LG is controlled by non-covalent forces, particularly electrostatic and hydrophobic interactions. Disulfide bonds did not contribute to the thermal response of -LG. Fatty N-acyl-amino acids caused marked increases in thermal stability and decreases in denaturation enthalpy, and additional peaks were observed in the presence of some palmitoyl derivatives.Contribution No. 2310, Centre for Food and Animal Research.We thank D. Raymond for her excellent technical assistance.     

十八烷/聚(St-MMA)相变微胶囊制备及表征

采用乳液聚合的方法,分别选取聚苯乙烯(PS)、聚甲基丙烯酸甲酯(PMMA)或苯乙烯和甲基丙烯酸甲酯的共聚物为壁材,正十八烷为芯材,十二烷基苯磺酸钠(SDBS)为乳化剂,制作相变储能微胶囊。用粒径分析仪、透射电子显微镜(TEM)、热重分析仪(TG)和示差扫描量热测试仪(DSC)对微胶囊的形貌、相变热性能和热稳定性分别进行表征。结果表明:壁材选取两者共聚物,当两种单体的比例为St∶MMA=1∶5,SDBS用量为1.5g(总质量的3%)时,微胶囊粒径大小均匀,粒子分散性好,壁材的包裹性好。微胶囊的放热峰为起始温度为27.3℃,终止温度为31.9℃,相变温度为28.9℃,相变焓为48.4J/g。TG表明长期使用温度不能超过131℃。IR分析微胶囊中含有芯材和壁材。这种十八烷/聚(St-MMA)相变微胶囊可以用于诸能材料。