Shape-stabilized phase change materials with high phase change enthalpy based on synthetic comb-like poly(acrylonitrile-co-ethylene glycol) for thermal management

Shape-stabilized poly(acrylonitrile-co-ethylene glycol)(PANEG) copolymer with comb-like structure was prepared via simple free-radical solution polymerization, where acrylic acid poly(ethylene glycol) methyl ether ester(MPEGA) and acrylonitrile(AN) were employed as monomers. Fourier transform infrared spectroscopy(FTIR), 1 H and 13 C nuclear magnetic resonance spectroscopy(1 H and 13 C NMR), wide-angle X-ray diffraction(WXAD) were used to characterize the chemical structure of resultant PANEG. In addition, the influences of MPEGA contents on energy storage performance, thermal reliability and thermal stability of PANEG materials were evaluated based on differential scanning calorimetry(DSC), polarizing optical microscopy(POM), thermal infrared imager and thermogravimetry analyzer(TG). The comb-like PANEG demonstrated a favorable temperature regulation performance and thermal reliability. With the increase of MPEGA contents, the enthalpy of PANEG increased, and when the content of MPEGA was 80 wt%, the phase change enthalpy of synthesized PANEG-80 reached to 106.70 J/g with a stable heat storage performance after 100 thermal cycling. Thermal infrared images and cooling curves revealed that synthetic PANEG could sustain a temperature in ranges of 22–31 °C for continuous 25 min, presenting excellent temperature regulation performance. Also, comb-like PANEG could be uniformly dissolved in dimethyl sulfoxide(DMSO),indicating that PANEG phase change fibers with potential applications in fields of intelligent thermoregulating textile and heat energy management could be obtained via one-step wet spinning.     

Theoretical Investigations on the Structure,Density, Thermodynamic and Performance Properties of Bis（2,2-dinitropropyl） formal

Density functional method was used to investigate the IR spectrum,heat of formation and thermal stability of a new energetic material bis(2,2-dinitropropyl) formal(BDNPF).The detonation velocity and pressure were evaluated by using the Kamlet-Jacobs equations based on the theoretical density and heat of formation.The bond dissociation energies for the weakest bonds were analyzed to investigate the thermal stability of the title compound.The results show that the C(1)-N(1) bond is predicted to be the trigger bond during pyrolysis.The crystal structure obtained by molecular mechanics belongs to the P21 space group,with the lattice parameters to be Z = 2,a = 11.5254,b = 6.2168,c = 9.5000  and ρ= 1.66 g/cm3.     

Thermal degradation kinetics of structurally diverse poly(bispropargyl ethers-bismaleimide) blends

Structurally diverse bispropargyl ethers using resorcinol,quinol,4,4￠-dihydroxy biphenyl,bisphenol-A,4,4￠-dihydroxy diphenyl ketone,4,4￠-dihydroxy diphenylsulphone,trimethyl indane bisphenol and tetramethyl spirobiindane bisphenol were prepared by using phase transfer catalyst.Synthesized materials were separately blended with 4,4￠-bismaleimido diphenyl methane(BMIM)in mole ratios(0.5:0.5).The materials were thermally cured and the structural characterisation and the thermal properties of these cross-linked materials are investigated using Fourier-transform infrared(FTIR)spectrophotometer and thermogravimetric analyzer(TGA).Among the different materials investigated poly MRPE,poly MBPEBPA and poly MSPE show higher onset degradation temperature of 300°C indicating higher thermal stability.The degradation kinetics is investigated using Flynn-Wall-Ozawa(FWO),Vyazovkin(VYZ)and Friedman(FRD)methods.Amongst the various cured materials investigated,the activation energy(Ea-D)values obtained for poly MRPE and poly MKPE were observed to increase continuously froma=0.2 to 0.8 and the values range from 199 kJ/mol to 245 k J/mol and 153 k J/mol to 295 k J/mol respectively.The crosslinked materials resulting from these bispropargyl monomers definitely need more energy for bond cleavage due to the presence of more aromatic units.The volatile products obtained during the thermal degradation of the polymers were analyzed using thermogravimetric-Fourier transform infrared analyses(TG-FTIR).The phenols,substituted phenols,carbon monoxide,carbon dioxide and small amount of aniline were found to be the major products during thermal degradation of these cured blends.     

Thermal and environmental stability of poly(4-ethynyl-p-xylylene-co-p-xylylene) thin films

The aim of this paper was to test the thermal and environmental stability of poly(4-ethynyl-p-xylyleneco-p-xylylene) thin films prepared by chemical vapor deposition(CVD) and to optimize the reaction conditions of the polymer.Fourier transformed infrared spectroscopy(FTIR),thermogravimetric analysis(TGA) and fluorescence microscopy were employed to investigate the stability of the reactive polymer coatings in various environmental conditions.Chemical reactivity of the thin films were then tested by Huisgen 1,3-dipolar cycloaddition reaction(‘‘click' reaction).The alkyne functional groups on poly(4-ethynyl-p-xylylene-co-p-xylylene) thin films were found to be stable under ambient storage conditions and thermally stable up to 100 8C when annealed at 0.08 Torr in argon.We also optimized the click reaction conditions of azide-functionalized molecules with poly(4-ethynyl-p-xylylene-co-p-xylylene).The best reaction result was achieved,when copper concentration was 0.5 mmol/L,sodium ascorbate concentration to copper concentration was 5:1.In contrast,the azide concentration and temperature had no obvious effect on the surface reaction.     

Chemical synthesis, spectral characterization and stability of some electrically conducting polymers

<正>The synthesis,characterization,thermal degradation and stability of polyaniline(PANI),poly(m-nitroaniline), poly(m-chloroaniline) and poly(o-methylaniline) were reported.Different properties were measured and compared with PANI to find out the effect of electron donating groups(-CH_3) and electron withdrawing groups(-Cl,- NO_2).It was found that the presence of any type of substitution in the benzene ring of aniline increased the solubility but reduced the yield,thermal stability and electrical conductivity.Two probe methods were used to measure the electrical conductivity of these polymers.The structural properties of these polymers were characterized by using FTIR and UV-Vis spectroscopic methods.Thermal degradation and stability of these polymers were explained by using thermogravimetric analysis(TGA) and conductivity measurements.     

ENVIRONMENTAL STABILITY OF THE POLYENE PREPARED BY DEHYDROCHLORINATION OF POLY(VINYL CHLORIDE)

A high-quality polyene can be obtained by exensive dehydrochlorination of poly(vinyl chloride) (PVC) in aliquid/solid two-phase system. The liquid phase is a tetrahydrofuran solution of PVC containing a small amount ofpoly(ethylene glycol) with molar mass of 400 g as a phase transfer catalys. The solid phase is potassium hydroxide particles.The structure of the polyene is polyacetylene-like and has a long conjugated C=C sequence and a narrow dispersity ofpolyene sequences according to its FT-infrared and Raman spectra. The environmental stability of the polyene was alsostudied by IR, Raman spectra and elemental analysis. Experimental results demonstrated that the polyene was susceptible toair and could be changed into a material containing high concentrations of hydroxyl and carbonyl groups. The polyenesequences were shortened and its dispersity became broader due to the effect of dioxygen.     

Preparation, Curing Reactivity and Thermal Properties of Titanium-doped Silicone Resins

Novel titanium-doped silicone resins were synthesized from low-cost silane monomers and tetrabutyl titanate as raw materials and hydrochloric acid as catalyst, with titanium element as dopant into principal chain of Si-O-Si. The resins were characterized by means of FTIR, 1 H NMR and 13 C NMR spectra, their thermal properties and curing properties were investigated and their corresponding films were determined. The results show that the thermal stability and storage stability of the resins were influenced by the types of silane monomers containing different carbon atomicities of organic group. The thermal stability of the titanium-doped silicone resin with a molar ratio of silane monomer B(n-propyl triethoxysilane) to silane monomer C(n-octyl triethoxysilane) being 1:1 is superior to that of the resin with a molar ratio of silane monomer B to silane monomer C being 1:3. However, the storage stability of the former is inferior to that of the latter.This work also showed that the synthesized titanium-doped silicone resins have the highest thermal stability up to 450―500 °C with an atomicity molar ratio of 1:4 of titanium to silicon in the reactants. But the best storage stability of the resin prepared from the reactants with an atomicity molar ratio of 1:6[n(Ti):n(Si)] was obtained. The effect of the type and content of curing agent on the curing properties of the resin was also studied. Moreover, thermal mechanism and curing mechanism were proposed in this work.     

APPLICATION OF TIME-TEMPERATURE SUPERPOSITION PRINCIPLE TO EVALUATION OF SCATTERING INTENSITY EVOLUTION IN PHASE SEPARATION FOR PMMA/SAN BLENDS

Spinodal phase separation behavior of poly(methyl methacrylate)/poly(styrene-co-acrylonitrile)(PMMA/SAN)blends was investigated by the time-resolved small angle light scattering (SALS) technique. It was found that the influence oftemperature on the scattering intensity evolution followed the time-temperature superposition principle. The relationshipbetween temperature and the relaxation time of scattering intensity I(t) can be well described by the Williams-Landel-Ferry(WLF) function.     

酸碱处理后纳米微晶纤维素的热行为分析

Nanocrystalline cellulose (NCC) was prepared from microcrystalline cellulose (MCC) by acid hydrolysis. It was observed that the diameter of NCC particles mainly distributed over 30-50nm by transmission electron microscope (TEM) . The crystal form and degree of crystallinity were detected by X-Ray diffraction. The results showed that NCC and MCC have the same crystal form of cellulose I, and that the reactions mainly occurred in the amorphous region of MCC during the acid hydrolysis process. The thermal behavior of NCC in different pH conditions was characterized by differential scanning calorimetry (DSC) . The consequences indicate that the thermal stability of NCC distinctly decreased by contrast with the thermal stability of MCC, and that the thermal stability of NCCs in alkali conditions was higher than that of NCCs in acid conditions. The specific surface area distinctly increased with sharp decreasing of the particle size of NCC. This induced the end carbons and active groups of surface of NCC to increase sharply, therefore caused the thermal stability of NCC to distinctly abate. That NCC has very strong adsorption affinity is the cause of the obvious difference of thermal behavior of NCC in different pH. In acid conditions the surface of NCC adsorbed a great lot of H^ , which induced the cellulose chains of surface of NCC to decompose at low temperature catalyzed by H^ . When adding sodium hydroxide solution, on one hand the H^ of surface of NCC was neutralized; on the other hand, the cellulose chains of low molecular weight were dissolved in sodium hydroxide solution and the defects of surface of NCC rearranged and stable structure formed. These factors improved the thermal stability of NCC in alkali conditions.     

Thermal degradation of poly(arylene sulfide sulfone)/N-methylpyrrolidone crystal solvate

<正>The thermal degradation of poly(arylene sulfide sulfone)/N-methylpyrrolidone(PASS/NMP) crystal solvate was studied by thermogravimetric analysis(TGA) and was compared with pure PASS in order to determine the way in which the formation of the crystal solvate affected the thermal properties of the polymer.The activation energy of the solid state process was determined using Kissinger's method,which does not require knowledge of the reaction mechanism(RM),to be 174.18 kJ/mol which was lower than that for pure PASS(E=214 kJ/mol).The study of master curves together with interpretation of integral methods,allows confirmation that the thermal degradation mechanism for PASS in the crystal solvate system is a decelerated R_n type,which is a solid-state process based on a phase boundary controlled reaction,in the conversion range considered.Whereas,the pure PASS follows a decelerated D_n thermodegradation mechanism in the same conversion range.     

Thermal Characteristics of Room Temperature Inorganic Phase Change System Containing Calcium Chloride

A novel inorganic calcium-based phase change material(PCM-Ca) consisted of 47.1%(mass fraction) water, 47.7% calcium chloride, 2% potassium nitrate, 2% potassium bromide and 1.2% strontium chloride with a solid-liquid phase change temperature of 21.4 ℃ was investigated systematically. Among the components of PCM-Ca, calcium chloride and water act as the latent heat storage materials, and potassium nitrate, potassium bromide and strontium chloride work as the modifier, thickener and nucleating agent, respectively. Thermochemical properties including melting point, latent heat, density and thermal conductivity of the PCM-Ca were measured experimentally. The experimental results indicate that the melting latent heat, thermal conductivity at the melting point and density at room temperature for the PCM-Ca are 203.3 kJ/kg, 1.3637 W·m^-1·K^-1 and 1.55×103 kg/m³, respectively. Moreover, a thirty-run-cycling test showed that the PCM-Ca has a good thermal characteristic with no phase segregation or supercooling, and the maximum deviations of latent heat and phase change temperature are only 0.2% and 1.6%, respectively.     

聚甲基丙烯酸甲酯/苯乙烯-丙烯腈无规共聚物薄膜表面原位原子力显微镜相图

采用原位原子力显微镜在线跟踪方法,研究了聚甲基丙烯酸甲酯/苯乙烯 丙烯腈无规共聚物共混体系表面相分离行为,得到了具有下临界共溶温度（临界温度约为175 ℃）原位相图。 与文献报道的用离位方法所得结果的主要差别是原位的临界相分离温度稍有提高,以及离位结果中存在的组成对称性。 这些差别主要来源于离位和原位实验方法上的差别,薄膜厚度减小导致的相容性,热力学历史的变化以及基底效应的加剧。     

PPESK/PES共混物热性能及动态机械性能研究

采用熔融共混法制备了不同重量比例的新型含二氮杂萘酮结构聚芳醚砜酮(PPESK)与聚醚砜(PES)共混物.利用热失重(TGA)及动态热机械仪(DMTA)对该共混物的热性能及动态机械性能进行了研究.研究结果表明,在氮气氛围中,PPESK热分解分为两步反应进行,反应级数n=1,说明PPESK在氮气氛围中的热分解反应类型与β(升温速率)无关而与材料物性有关;采用Ozawa方法得出在15%热失重前,热分解活化能的平均值为240 kJ/mol;随着升温速率的提高,PPESK热降解速率有减缓趋势.在280℃以前,PPESK储能模量值随温度变化较小,保持在较高值,温度在280~330℃之间,储能模量值降低幅度突变.另外,PPESK中加入PES会降低其储能模量值及其热稳定性.     

聚甲基丙烯酸甲酯与苯乙烯-丙烯腈共聚物混合体系相分离初期的固体NMR研究

本文用氢谱宽线固体NMR技术研究了聚甲基丙烯酸甲酯(PMMA)和苯乙烯-丙烯腈共聚物(SAN)混合体系不稳相分离初期阶段, 得到了在分相过程中弛豫谱的变化规律, 测定了相分离增长速率。结果指出: 随着退火时间的增加, 两相体系形成; 大分子扩散方式是由浓度低的区域向浓度高的区域扩散, 扩散系数为负值; 相分离增长速率的数量级与用光散射研究的结果相同; 分子相互作用的相关距离为46.5 nm。     

Preparation and thermal properties of palmitic acid/expanded graphite/carbon fiber composite phase change materials for thermal energy storage

Using palmitic acid (PA), expanded graphite (EG), and carbon fiber (CF) as raw materials, PA/EG/CF composite phase change materials (CPCMs) with diverse CF contents were invented by melt blending approach. The effects of different ratios on thermal properties were studied by experimental characterization and testing. Scanning electron microscopy images displayed that PA was adsorbed in the pores of the EG surface, while CF was disorderly but uniformly embedded in the interior and surface of pores. The chemical stability and thermal decomposition stability of CPCM at low temperature were proved by Fourier transform infrared spectrometer and thermogravimetric analyzer results, respectively. According to the law of heat storage/release time and latent heat variation, the optimal ratio scheme was determined, and its heat storage/release time was 65% and 59% lower than pure PA, respectively. The form-stable materials were prepared by compression forming method, and thermal cycling experiment results demonstrated that the higher the content of CF, the stronger the inhibition of mass loss. Based on the experimental results, the PA/EG/CF CPCM has the advantages of stable phase transition, strong stability, and fast heat storage and release rate, so it has a marvelous application prospect in the field of low-temperature heat storage engineering.

     

Multiple-SO3H functioned ionic liquid as efficient curing agent for phthalonitrile-terminated poly(phthalazinone ether nitrile)

Combined with the advantages of low melting point,high thermal stability and strong acidity,a multipleSO_3H functioned ionic liquid(MIL) was developed successfully as a curing agent to promote the curing reaction of phthalonitrile-terminated poly(phthalazinone ether nitrile)(PPEN-Ph).The curing kinetics over differential scanning calorimetry(DSC) showed that both the initial curing temperature T_(p0') and apparent activation energy Ea'(based on Kissinger equation) were reduced significantly over MIL(207.9℃ and 101.5 kJ/mol) compared to the common curing agent ZnCl_2(268.5℃ and 201.5 kJ/mol).Moreover,under identical curing conditions,the resulting thermosetting resin over former(T_(d5%)=526.1℃) showed better thermal stability than that over latter(T_(d5%)=512.1 ℃).These results indicated that MIL should be a good candidate as a curing agent for phthalonitrile resins.     

多孔聚苯醚的合成及气体储存

通过厄尔曼缩合反应合成了一种具有dia-c5 拓扑结构的多孔聚苯醚JUC-Z6, 并对其结构进行了表征. 结果表明, 该化合物具有高热稳定性(214℃ 失重5%), 高化学稳定性、 高BET比表面积(192 m²/g)及窄孔径分布(1.36 nm). 低压气体吸附测试结果表明, JUC-Z6在多孔材料中具有较高的吸附焓(氢气4.1 kJ/mol, 二氧化碳33.7 kJ/mol, 甲烷4.1 kJ/mol).     

过氧化苯甲酸叔丁酯的热分解动力学研究及SADT推算

研究了过氧化苯甲酸叔丁酯的热分解动力学及不同包装规格下的自加速分解温度(SADT),利用C600微量热仪测试了过氧化苯甲酸叔丁酯的热分解特征,得到升温速率分别为0.1 K/min、0.2 K/min、0.5 K/min、1 K/min下热流随时间的变化曲线,并使用Friedman等转化率法对所得的实验数据进行分析处理,得到了过氧化苯甲酸叔丁酯的分解反应活化能、指前因子等热动力学参数,推算了不同包装规格的过氧化苯甲酸叔丁酯的SADT。结果表明TBPB分解活化能及指前因子随转化率变化而变化,活化能范围为42-135.5 kJ/mol,指前因子范围为0.25-33.5,在25L聚乙烯桶包装下的SADT为59℃,50L下为52℃,200L下为46℃。     

Microwave-assisted synthesis of poly(urea-formaldehyde)/lauryl alcohol phase change energy storage microcapsules

In this study, lauryl alcohol suitable for thermal energy storage applications was microencapsulated in a poly(urea-formaldehyde) shell. The microcapsules were prepared by microwave-assisted in situ polymerization. The morphology and particle size of the poly(urea-formaldehyde)/lauryl alcohol phase change energy storage microcapsules(UF/LA PCESMs) were analyzed using transmission electron microscopy, scanning electron microscopy, atomic force microscopy and dynamic light scattering. The latent heat storage capacities of lauryl alcohol and UF/LA PCESMs were determined using differential scanning calorimetry. The chemical composition of the microcapsules was characterized using Fourier transform infrared spectroscopy. All of the results show that UF/LA PCESMs were synthesized successfully and that the latent heat storage capacity and encapsulation efficiency were 156.0 J/g and 75.0%, respectively, and the diameter of each microcapsule was around 150 nm.     

十八烷/聚(St-MMA)相变微胶囊制备及表征

采用乳液聚合的方法,分别选取聚苯乙烯(PS)、聚甲基丙烯酸甲酯(PMMA)或苯乙烯和甲基丙烯酸甲酯的共聚物为壁材,正十八烷为芯材,十二烷基苯磺酸钠(SDBS)为乳化剂,制作相变储能微胶囊。用粒径分析仪、透射电子显微镜(TEM)、热重分析仪(TG)和示差扫描量热测试仪(DSC)对微胶囊的形貌、相变热性能和热稳定性分别进行表征。结果表明:壁材选取两者共聚物,当两种单体的比例为St∶MMA=1∶5,SDBS用量为1.5g(总质量的3%)时,微胶囊粒径大小均匀,粒子分散性好,壁材的包裹性好。微胶囊的放热峰为起始温度为27.3℃,终止温度为31.9℃,相变温度为28.9℃,相变焓为48.4J/g。TG表明长期使用温度不能超过131℃。IR分析微胶囊中含有芯材和壁材。这种十八烷/聚(St-MMA)相变微胶囊可以用于诸能材料。