Syntheses and structures of the first heavy-alkali-metal tris(trimethylsilyl)germanides

The first heavy-alkali-metal tris(trimethylsilyl)germanides were obtained in high yield and purity by a simple one-pot reaction involving the treatment of tetrakis(trimethylsilyl)germane, Ge(SiMe3)4, with various alkali metal tert-butoxides. The addition of different sizes of crown ethers or the bidentate TMEDA (TMEDA=N,N,N',N'-tetramethylethylenediamine) provided either contact or separated species in the solid state, whereas in aromatic solvents the germanides dissociate into separated ions, as shown by 29Si NMR spectroscopic studies. Here we report on two series of germanides, one displaying M-Ge bonds in the solid state with the general formula [M(donor)n Ge(SiMe3)3] (M=K, donor=[18]crown-6, n=1, 1; Rb, donor=[18]crown-6, n=1, 4; and M=K, donor=TMEDA, n=2, 6). The silicon analogue of 6, [K(tmeda)2Si(SiMe3)3] (7) is also included to provide a point of reference. The second group of compounds consists of separated ions with the general formula [M(donor)2][Ge(SiMe3)3] (M=K, donor=[15]crown-5, 2; M=K, donor=[12]crown-4, 3; and M=Cs, donor=[18]crown-6, 5). While all target compounds are highly sensitive towards hydrolysis, use of the tridentate nitrogen donor PMDTA (PMDTA=N,N,N',N',N'-pentamethyldiethylenetriamine) afforded even more reactive species of the composition [K(pmdta)2Ge(SiMe3)3] (8). We also include the silanide analogue [K(pmdta)2Si(SiMe3)3] (9) for sake of comparison. The compounds were typically characterized by X-ray crystallography, and 1H, 13C, and 29Si NMR and IR spectroscopy, unless extremely high reactivity, as observed for the PMDTA adducts 8 and 9, prevented a more detailed characterization.     

Cation complexing of crown ethers using fluorescence spectroscopy, part II

The complex formations of benzo[12]crown-4, benzo[15]crown-5 and benzo[18]crown-6 with perchlorate salts of Mg(2+), Li(+) and Na(+) were investigated using the steady state fluorescence emission spectroscopy in acetonitrile. The complexation enhanced quenched fluorescence spectra, (CEQFS) exhibited the ion complexation role of the macrocyclic ethers and equilibrium constant, K(e) of 1:1 stoichiometry were estimated. The K(e) were found in the order of Mg(+)>Na(+)>Li(+) for benzo[15]crown-5 whilst Na(+)>Mg(+)>Li(+) order was found with benzo[12]crown-4 at 298 K.     

Synthesis and characterisation of helical beta-peptide architectures that contain (S)-beta3-HDOPA(Crown Ether) derivatives

A new set of beta-amino acids that carry various crown ether receptors on their side chains of the general formula (S)-beta(3)-HDOPA(crown ether) (HDOPA: homo-3,4-dihydroxyphenylalanine; (crown ether): [15]crown-5 ([15-C-5]), [18]crown-6 ([18-C-6]), [21]crown-7 ([21-C-7]), 1,2-Benzo-[24]crown-8 ([Benzo-24-C-8]) and (R)-Binol-[20]crown-6 ([(R)-Binol-20-C-6])) was prepared. Peptides that are based on these new crowned beta-amino acids combined with (1S,2S)-ACHC (2-aminocyclohexanecarboxylic acid), which is known to be a potent 3(14)-helix inducer, to the hexamer level, with two crowned residues at the i and i+3 positions of the main-chain, were synthesized in solution by stepwise coupling using Boc-N(alpha)-protection (Boc: tert-butoxycarbonyl) and the EDC/HOAt C-activation method. Their conformational analysis was performed by using FTIR absorption, NMR and CD spectroscopy techniques. Our results are in full agreement with a 3(14)-helix conformation.     

苯并-15-冠-5和二苯并-18-冠-6萃取分离铟(III)的研究

本文用斜率法、饱和法以及通过与萃取合物相对应的冠醚配合物晶体的制备及其性质研究, 探讨了In^3^+的萃取机理, 测定并计算了表观萃取平衡常数, 将此萃取体系应用于铟和某些体系应用于铟和某些金属离子的萃取分离, 亦获得较好的结果.     

The importance of alkali cations in the [{RuCl2(p-cymene)}2]-pseudo-dipeptide-catalyzed enantioselective transfer hydrogenation of ketones

We studied the role of alkali cations in the [{RuCl2(p-cymene)}2]-pseudo-dipeptide-catalyzed enantioselective transfer hydrogenation of ketones with isopropanol. Lithium salts were shown to increase the enantioselectivity of the reaction when iPrONa or iPrOK was used as the base. Similar transfer-hydrogenation systems that employ chiral amino alcohol or monotosylated diamine ligands are not affected by the addition of lithium salts. These observations have led us to propose that an alternative reaction mechanism operates in pseudo-dipeptide-based systems, in which the alkali cation is an important player in the ligand-assisted hydrogen-transfer step. DFT calculations of the proposed transition-state (TS) models involving different cations (Li+, Na+, and K+) confirm a considerable loosening of the TS with larger cations. This loosening may be responsible for the fewer interactions between the substrate and the catalytic complex, leading to lower enantiodifferentiation. This mechanistic hypothesis has found additional experimental support; the low ee obtained with [BnNMe3]OH (a large cation) as base can be dramatically improved by introducing lithium cations into the system. Also, the complexation of Na+, K+, and Li+ cations by the addition of [15]crown-5 and [18]crown-6 ethers and cryptand 2.1.1 (which selectively bind to these cations and, thus, increase their bulkiness), respectively, to the reaction mixture led to a significant drop in the enantioselectivity of the reaction. The lithium effect has proved useful for enhancing the reduction of different aromatic and heteroaromatic ketones.     

The first ionic liquid-promoted three-component coupling strategy for an expeditious synthesis of β-nitrocarbonitriles/thiocyanates

A novel and convenient three-component coupling reaction of nitromethane, aromatic aldehydes and trimethylsilyl cyanide (TMSCN) or ammonium thiocyanate has been developed for an expeditious synthesis of β-nitrocarbonitriles or β-nitrothiocyanates, respectively, via C-C and C-S bond-forming reactions. The synthetic protocol strategically involves a one-pot sequential Henry reaction and a Michael addition efficiently promoted by the same ionic liquid [bmim]OH. The main advantages of the present approach include the use of inexpensive simple substrates and an ionic liquid as an efficient reaction promoter for the mild synthesis in a one-pot procedure.     

How charging corannulene with one and two electrons affects its geometry and aggregation with sodium and potassium cations

Bowl-shaped mono- and dianions are prepared by reduction of corannulene (C(20)H(10), 1) with sodium and potassium metals in the presence of [18]crown-6 ether. Single-crystal X-ray diffraction studies of two sodium salts, [Na(THF)(2)([18]crown-6)](+)[1(-)] (2a) and [Na([18]crown-6)](+)[1(-)] (2b), reveal the presence of naked corannulene monoanions 1(-) in both cases. In contrast, the potassium adduct, [K([18]crown-6)](+)[1(-)] (3), shows an η(2)-binding of the K(+) ion to the convex face of 1(-). For the first time, corannulene dianions have been isolated as salts with sodium, [Na(2)([18]crown-6)](2+)[1(2-)] (4a) and [Na(THF)(2)([18]crown-6)](+)[Na([18]crown-6)](+)[1(2-)] (4b), and potassium counterions, [K([18]crown-6)](2)(+)[1(2-)] (5). Their structural characterization reveals geometry perturbations upon addition of two electrons to a bowl-shaped polyarene. It also demonstrates η(5)- or η(6)-binding of metals to the curved carbon surface of 1(2-), depending on the crystallization conditions. Both mono- and doubly-charged corannulene bowls show the preferential exo binding of Na(+) and K(+) ions in all investigated compounds. Various types of C-H···π interactions are found in the crystals of 2-5. The UV/Vis, ESR, and (1)H NMR spectroscopic studies of 2-5 indicate different coordination environment of corannulene anions in solution, depending on the metal ion.     

Unexpected structural diversity in alkali metal azide-crown ether complexes: syntheses, X-ray structures, and quantum-chemical calculations

A series of alkali metal azide-crown ether complexes, [Li([12]crown-4)(N3)], [Na([15]crown-5)(N3)], [Na([15]crown-5)(H2O)2]N3, [K([18]crown-6)(N3)(H2O)], [Rb([18]crown-6)(N3)(H2O)], [Cs([18]crown-6)(N3)]2, and [Cs([18]crown-6)(N3)(H2O)(MeOH)], has been synthesised. In most cases, single crystals were obtained, which allowed X-ray crystal structures to be derived. The structures obtained have been compared with molecular structures computed by density functional theory (DFT) calculations. This has allowed the effects of the crystal lattice on the structures to be investigated. Also, a study of the M-N(terminal) metal-azide bond length and charge densities on the metal (M) and terminal nitrogen centre (N(terminal)) in these complexes has allowed the nature of the metal-azide bond to be probed in each case. The bonding in these complexes is believed to be predominantly ionic or ion-dipole in character, with the differences in geometries reflecting the balance between maximising the coordination number of the metal centre and minimising ligand-ligand repulsions. The structures of the crown ether complexes determined in this work show the subtle interplay of such factors. The significant role of hydrogen bonding is also demonstrated, most clearly in the structures of the K and Rb dimers, but also in the chain structure of the hydrated Cs complex.     

Stable Ketenyl Anions via Ligand Exchange at an Anionic Carbon as Powerful Synthons**

Under an atmosphere of carbon monoxide (CO), a (phosphino)diazomethyl anion salt [[P]-CN₂][K(18-C-6)(THF)] ( 1 ) ([P]=[(CH₂)(NDipp)]₂P; 18-C-6=18-crown-6; Dipp=2,6-diisopropylphenyl) undergoes a facile N₂/CO exchange reaction giving the (phosphino)ketenyl anion salt [[P]-CCO][K(18-C-6)] ( 2 ). Oxidation of 2 with elemental Se affords the (selenophosphoryl)ketenyl anion salt [P](Se)-CCO][K(18-C-6)] ( 3 ). These ketenyl anions feature a strongly bent geometry at the P-bound carbon and this carbon atom is highly nucleophilic. The electronic structure of the ketenyl anion [[P]-CCO]⁻ of 2 is examined by theoretical studies. Reactivity investigations demonstrate 2 as a versatile synthon for derivatives of ketene, enolate, acrylate and acrylimidate moieties.     

二维网状冠醚配合物－苯并15－冠－5、二苯并18－冠－6与Na_2[Pt(SCN)_6]配合物的合成与结构

合成了苯并15-冠-5、二苯并18-冠-6与Na_2[Pt(SCN)_6]的配合物：[Na(B15- C-5)]_2[Pt(SCN)_6] (1),[Na(DB18-C-6)]_2[Pt(SCN)_6] (2),并通过元素分析 、红外光谱、单晶X射线衍射进行了表征。1为单斜晶系,空间群P2_1/c,a = 1. 0974(5) nm,b = 1.5187(7) nm,c = 1.3632(6) nm,β = 96.407(7)°,V = 2. 2568(18) nm~3,Z = 2,D_(calcd) = 1.746 g/cm~3,F(000) = 1184,R_1 = 0. 0357,wR_2 = 0.0868。 2为三斜晶系,空间群 P1-bar,a = 1.2500(3) nm,b = 1.2825(3) nm,c = 1.9342(4) nm,α = 106.82(3)°,β = 102.51(3)°,γ = 103.04(3)°,V = 2.7562 nm~3,Z = 2,D_(calcd) = 1.579 g/cm~3,F(000) = 1316,R_1 = 0.0364,wR_2 = 0.0771。配合物分别由两个[Na(B15-C-5)]~+, [Na(DB18-C-6)]~+配阳离子和一个[Pt(SCN)_6]~(2-)配阴离子组成。配阳离子和配 阴离子通过Na-N键形成二维网状结构。     

Boron trifluoride catalysed reactions of 2,2,2-trichloroethyl 6-diazopenicillanate with aromatic aldehydes: rearrangements via penam c(5)-c(6) bond cleavage.

The BF₃·Et₂O catalysed reactions of diazopenicillanate 1 with aromatic aldehydes provide 2,3-dihydrothiazolo[2,3-b][1,3]oxazin-5-ones 4 $\text{via}$ C(5)-C(6) cleavage of 6-formyl-penicillanates 8.     

Facile access to redox-active C2-bridged complexes with half-sandwich manganese end groups

The dinuclear mixed-valent complex [(MeC5H4)(dmpe)MnC(2)Mn(dmpe)(C5H4Me)](+)[(eta2-MeC5H4)3Mn](-)[1](+)[2]- (dmpe=1,2-bis(dimethylphosphanyl)ethane) was prepared by the reaction of [Mn(MeC5H4)2] with dmpe and Me(3)SnC[triple chemical bond]CSnMe3. The reactions of [1](+)[2]- with K[PF6] and Na[BPh4] yielded the corresponding anion metathesis products [(MeC5H4)(dmpe)MnC2Mn(dmpe)(C5H4Me)][PF6] ([1][PF6]) and [(MeC5H4)(dmpe)MnC2Mn(dmpe)(C5H4Me)][BPh4] ([1][BPh4]). These mixed-valent species can be reduced to the neutral form by reaction with Na/Hg. The obtained complex [(MeC5H4)(dmpe)MnC2Mn(dmpe)(C5H4Me)] (1) displays a triplet/singlet spin equilibrium in solution and in the solid state, which was additionally studied by DFT calculations. The diamagnetic dicationic species [(MeC5H4)(dmpe)MnC2Mn(dmpe)(C5H4Me)][PF6]2 ([1][PF6]2) was obtained by oxidizing the mixed-valent complex [1][PF6] with one equivalent of [Fe(C5H5)2][PF6]. Both redox processes are fully reversible. The dinuclear compounds were characterized by NMR, IR, UV-visible, and Raman spectroscopy, cyclic voltammetry, and magnetic susceptibility measurements. X-ray diffraction studies were performed on [1][2], [1][PF6], [1][BPh4], and [1][PF6]2.     

Supramolecular cation assemblies of hydrogen-bonded (NH4+/NH2NH3+)(crown ether) in [Ni(dmit)2]-based molecular conductors and magnets

Hydrogen-bonded supramolecular cation assemblies of (NH4+/NH2-NH3+)(crown ether), where the crown ether is [12]crown-4, [15]crown-5, or [18]crown-6, were incorporated into electrically conducting [Ni(dmit)2] salts (dmit2- = 2-thioxo-1,3-dithiole-4,5-dithiolate). (NH4+)([12]crown-4)[Ni(dmit)2]3(CH3CN)2 had a pyramidal shape, while ionic channels were observed in (NH4+)(0.88)([15]crown-5)[Ni(dmit)(2)]2 and (NH4+)(0.70)([18]crown-6)[Ni(dmit)(2)]2. Both (NH4+)(0.88)([15]crown-5) and (NH4+)(0.70)([18]crown-6) contained regularly spaced [Ni(dmit)(2)] stacks formed by N-H.O hydrogen bonding between the oxygen atoms in crown ethers and the NH4+ ion. NH4+ occurred nonstoichiometrically; there were vacant ionic sites in the ionic channels. The ionic radius of NH4+ is larger than the cavity radius of [15]crown-5 and [18]crown-6. Therefore, NH4+ ions could not pass through the cavity and were distributed randomly in the ionic channels. The static disorder caused the conduction electrons to be randomly localized to the [Ni(dmit)2] stacks. Hydrazinium (NH2-NH3+) formed the supramolecular cations in (NH2-NH3+)([12]crown-4)2[Ni(dmit)2]4 and (NH2-NH3+)2([15]crown-5)3[Ni(dmit)2]6, possessing a sandwich and club-sandwich structure, respectively. To the best of our knowledge, these represent the first hydrazinium-crown ether assemblies to be identified in the solid. In the supramolecular cations, hydrogen bonding was detected between the ammonium or the amino protons of NH2-NH3+ and the oxygen atoms of crown ethers. The sandwich-type cations coexisted with the [Ni(dmit)2] dimer stacks. Although the assemblies were typically semiconducting, ferromagnetic interaction (Weiss temperature = +1 K) was detected in the case of (NH2-NH3+)2([15]crown-5)3[Ni(dmit)2]6. The (NH2-NH3+)0.8([18]crown-6)[Ni(dmit)2]2 and (NH4+)0.76([18]crown-6)[Ni(dmit)2]2 crystals were isomorphous. The large and flexible [18]crown-6 allowed for maintaining the same ionic channel structure through replacement of the NH4+ cation by NH2-NH3+.     

Monosaccharides as silicon chelators: pentacoordinate bis(diolato)(phenyl)silicates with the cis-furanose isomers of common pentoses and hexoses

Five-coordinate phenylsilicates are formed from the reaction of trimethoxy(phenyl)silane with monosaccharides in methanol in the presence of a stoichiometric amount of base. Five complexes have been isolated and characterized with two ketoses and three aldopentoses. The silicon central atom in [K([18]crown-6)][PhSi(beta-D-Fruf 2,3H-2)2].MeOH (1, Fru=fructose) is part of two chelate rings, with the ligands being beta-D-fructofuranose-O2,O3 dianions. The beta-furanose isomer is best suited for silicon ligation because it exhibits a torsion angle close to 0 degrees for the most acidic diol function, thus assuring a flat chelate ring. The same structural principles are also found in [K([18]crown-6)][PhSi(beta-D-Araf1,2H-2)2].2 MeOH (2, Ara=arabinose), [K([18]crown-6)][PhSi(alpha-D-Ribf1,2H-2)2] (3, Rib=ribose), [K([18]crown-6)][PhSi(alpha-D-Xylf1,2H-2)2]. acetone (4, Xyl=xylose), and [K([18]crown-6)][PhSi(alpha-D-Rulf2,3H-2)2] (5, Rul=ribulose).     

18-冠-6与Na2[M(mnt)2](M=Cu,Ni)配合物的合成与结构

研究了18-冠-6分别与Na2[M(mnt)2][M=Cu,Ni;mnt=丁二腈烯二硫醇阴离子,C2S2(CN)^2^-~2]的反应,得到的配合物{[Na(18-C-6)][Na(18-C-6)(H2O)]}[Cu(mnt)2](1),[Na(18-C-6)(H2O)]2[Ni(mnt)2].(18-C-6)(2)通过元素分析、红外光谱、X射线单晶衍射进行了表征。两个配合物均为三斜晶系,空间群P1。1的晶体学结构数据：a=1.22697(19)nm,b=1.22780(19)nm,c=1.5665(3)nm,α=95.083(3)°,β=101.534(3)°,Υ=91.007(3)°,V=2.3016(6)nm^3,Z=2,Dcalcd=1.350g/cm^3,F(000)=976,R1=0.0726,wR2=0.1843.2的晶体学结构数据：a=1.11620(17)nm,b=1.22054(18)nm,c=1.27939(18)nm,α=111.647(2)°,β=29.792(3)°,Υ=103.201(2)°,V=2.5461(4)nm^3,Z=1,Dcalcd=1.304g/cm^3,F(000)=642,R1=0.0459,wR2=0.1003.1中的[Cu(mnt)2]^2^-通过mnt的氮原子与[Na(18-C-6)]^+中的钠原子成键,形成了一维链状结构;[Na(18-C-6)(H2O)]^+只起平衡电荷的作用。2中的[Ni(mnt)2]^2^-也通过配体的mnt氮原子与两个[Na(18-C-6)(H2O)]^+中的钠原子成键,形成稳定的中性配合物。     

Facile in situ synthesis of nanofluids based on ionic liquids and copper oxide clusters and nanoparticles

Two stable nanofluids comprising of mixed valent copper(I,II) oxide clusters (<1 nm) suspended in 1-butyl-3-methylimidazolium acetate, [C(4)mim][OAc], and copper(II) oxide nanoparticles (<50 nm) suspended in trioctyl(dodecyl)phosphonium acetate, [P(8 8 8 12)][OAc], were synthesised in a facile one-pot reaction from solutions of copper(II) acetate hydrate in the corresponding ionic liquids. Formation of the nanostructures was studied using (13)C NMR spectroscopy and differential scanning calorimetry (DSC). From a solution of Cu(OAc)(2) in 1-ethyl-3-methylimidazolium acetate, [C(2)mim][OAc], crystals were obtained that revealed the structure of [C(2)mim][Cu(3)(OAc)(5)(OH)(2)(H(2)O)]·H(2)O, indicating the formation of copper hydroxo-clusters in the course of the reaction. Synthesised nanostructures were studied using transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS). Physical properties of the prepared IL-nanofluids were examined using IR and UV-VIS spectroscopy, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) and densitometry.     

Silylation of 5′-O-DMT-2′-Deoxyncleosides Using Dibenzo [18] Crown-6 and PTC

3′O-silylated derivatives of 5′-O-DMT-2′deoxynucleoside (2) were synthesized in high yield by reaction of 5′-O-DMT-2′-deoxynucleosides (1) with tert-butyl dimethylsilylchloride using sodium hydride, benzyltriethylammonlum chloride [TEBA] and a catalytic amount of dibenzo-[18]-crown-6 [DB-18-C-6] or 15-crown-5 [15-C-51 under mild reaction conditions.     

Supramolecular cations of the m-fluoroanilinium(dibenzo[18]crown-6) in ferromagnetic salt

A supramolecular cation of (m-FAni(+))(DB[18]crown-6), where m-FAni(+) and DB[18]crown-6 denote m-fluoroanilinium(+) and dibenzo[18]crown-6, respectively, which is the polar unit rotating in the ferroelectric crystal of (m-FAni(+))(DB[18]crown-6)[Ni(dmit)(2)](-), was introduced into a ferromagnetic [MnCr(oxalate)(3)](-) salt as the counter cation. The crystal structure of (m-FAni(+))(DB[18]crown-6)[MnCr(oxalate)(3)](-)(CH(3)OH)(CH(3)CN) (1) is constructed from alternating layers of a two-dimensional honeycomb layer of [MnCr(oxalate)(3)](-) and (m-FAni(+))(DB[18]crown-6) supramolecular cations. The anionic layer is composed of Mn(II) and Cr(III) ions with S = 5/2 and S = 3/2 spins, respectively, bridged by the oxalate anions, which show ferromagnetic ordering at 5.5 K. The supramolecular structure is formed through the formation of hydrogen bonds between the ammonium hydrogen atoms of the m-FAni(+) cations and the oxygen atoms of the DB[18]crown-6 cavity. No orientational disorder of the fluorine atoms was observed in our X-ray structural analysis, suggesting that a two-fold flip-flop motion of the m-FAni(+) cations does not occur in the salt. The rotational freedom of the m-FAni(+) cations in the salt is restricted by the steric hindrance from neighbouring DB[18]crown-6 molecules. A design strategy for the rotation in a salt is discussed, based on the volume that the supramolecular cations occupy in the unit cell.     

Scandium(III) coordination polymers containing capsules based on two p-sulfonatocalix[4]arenes

Reactions of sodium p-sulfonatocalix[4]arene and scandium(III) tristriflate in the presence, and absence, of [18]crown-6 give the crystalline complexes [Sc2(mu-OH)2(H2O)10][Na4(H2O)8-[calix[4]arene(SO3)4]2).13 H2O and [[Sc2(mu-OH)2(H2O)8][Sc(H2O)4]2[calix[4]-arene(SO3)4-H+]2([18]crown-6).16H2O. Both complexes involve novel coordination polymers with calixarene units linked through sodium or scandium centers and also feature capsule assemblies through to the head-to-head association of calixarenes. A linear array of capsules associated with an infinite chain of aquo-bridged sodium ions, and an aquated hydroxy-bridged scandium(III) dimer, [Sc2(mu-OH)2(H2O)10]4+, are found in the absence of the crown ether. In the presence of [18]crown-6 both hydrated scandium monomers and dimers bridge between calixarenes in a two-dimensional coordination network. The crown ethers reside in cavities created by two calixarenes from adjacent polymeric sheets via a variety of supramolecular interactions(hydrogen-bonding, shape complementarity), and effectively add a third dimension to the network. The extended structure of both of these polymers is highly porous, and resembles a bilayer.     

Syntheses and Structures of 5-Membered Heterocycles Featuring 1,2-Diphospha-1,3-Butadiene and Its Radical Anion

LGa(P₂OC)cAAC 2 features a 1,2-diphospha-1,3-butadiene unit with a delocalized π-type HOMO and a π*-type LUMO according to DFT calculations. [LGa(P₂OC)cAAC][K(DB-18-c-6)] 3 [K(DB-18-c-6] containing the 1,2-diphospha-1,3-butadiene radical anion 3 ⋅ ⁻ was isolated from the reaction of 2 with KC₈ and dibenzo-18-crown-6. 3 reacted with [Fc][B(C₆F₅)₄] (Fc=ferrocenium) to 2 and with TEMPO to [L^−HGa(P₂OC)cAAC][K(DB-18-c-6)] 4 [K(DB-18-c-6] containing the 1,2-diphospha-1,3-butadiene anion 4⁻ . The solid state structures of 2 , 3 K(DB-18-c-6], and 4 [K(DB-18-c-6] were determined by single crystal X-ray diffraction (sc-XRD).