可见光下具有高光子效应和光催化活性的CuS-石墨烯氧化物/TiO2复合材料的制备（英文）

CuS-graphene oxide/TiO2 composites were prepared using a sol-gel method to improve the photocatalytic performance of the photocatalyst. The composites were characterized by X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray analysis, and transmission electron microscopy. The photocatalytic activities were examined by the degradation of methylene blue (MB) under visible-light irradiation. The photodegradation of MB under visible-light irradiation reached 90.1% after 120 min. The kinetics of MB degradation was plotted alongside the values calculated from the Langmuir-Hinshelwood equation. The CuS-graphene oxide/TiO2 sample prepared using 0.2 mol of TiO2 showed the best photocatalytic activity. This was attributed to a cooperative reaction as a result of increased photoabsorption by graphene oxide and an increased photocatalytic effect by CuS.     

高活性多壁碳纳米管/TiO2纳米复合物光催化剂光催化降解活性黑5染料（英文）

A nanocomposite UV-visible light-responsive multiwalled carbon nanotube (MWCNT)/titanium dioxide(TiO2) nanophotocatalyst was successfully synthesized by a modified sol-gel method using titanium isopropoxide and functionalized MWCNTs as the starting precursors. The photocatalytic activity of the TiO2 and the nanohybrid material was investigated through the photodegradation of Reactive Black 5 dye under ultraviolet light irradiation. X-ray diffraction analysis indicated that anatase phase was obtained for both the pure TiO2 and the MWCNT/TiO2 composite, while Raman spectroscopy confirmed the presence of MWCNTs in the composite. Field emission scanning elec-tron microscopy revealed that TiO2 nanoparticles with an individual diameter of about 10–20 nm were coated on the surface of the MWCNTs. The specific surface areas of the samples were found to be 80 and 181 m2/g for the pure TiO2 and MWCNT/TiO2, respectively. As a result, MWCNT/TiO2 showed better photocatalytic performance than pure TiO2 because the high surface area of MWCNTs enabled them to function as good electron acceptors for the retardation of electron-hole pair recombination.     

Ag2S-石墨烯/TiO2的声化学法合成及可见光催化活性（英文）

Ag2S‐graphene/TiO2 composites were synthesized by a facile sonochemical method.The products were characterized by X‐ray diffraction,scanning electron microscopy,energy dispersive X‐ray spectroscopy,transmission electron microscopy,and UV‐Vis diffuse reflectance spectrophotometry.During the synthesis reaction,the reduction of graphene oxide and loading of Ag2S and TiO2 particles were achieved.The Ag2S‐graphene/TiO2 composites possessed a large adsorption capacity for dyes,an extended light absorption range,and efficient charge separation properties.Hence,in the photodegradation of rhodamine B,a significant enhancement in the reaction rate was observed with the Ag2S‐graphene/TiO2 composites as compared to pure TiO2.The generation of reactive oxygen species was detected by the oxidation of 1,5‐diphenyl carbazide to 1,5‐diphenyl carbazone.The high activity was attributed to the synergetic effects of high charge mobility and the red shift in the absorption edge of the Ag2S‐graphene/TiO2 composites.     

超声辅助法合成的石墨烯-TiO2复合材料声催化降解罗丹明B（英文）

A series of graphene-TiO2 composites was fabricated from graphene oxide and titanium n-butoxide(TNB) by an ultrasonic-assisted method.The structure and composition of the nanocomposites were characterized by Raman spectroscopy,BET surface area measurements,X-ray diffraction,transmission electron microscopy,and ultraviolet-visible absorption spectroscopy.The average size of the TiO2 nanoparticles on the graphene nanosheets was controlled at around 10-15 nm without using surfactant,which is attributed to the pyrolysis and condensation of dissolved TNB into TiO2 by ultrasonic irradiation.The catalytic activity of the composites under ultrasonic irradiation was determined using a rhodamine B(RhB) solution.The graphene-TiO2 composites possessed a high specific surface area,which increased the decolorization rate for RhB solution.This is because the graphene and TiO2 nanoparticles in the composites interact strongly,which enhances the photoelectric conversion of TiO2 by reducing the recombination of photogenerated electron-hole pairs.     

Ni/TiO2-SiO2上光催化重整葡萄糖以低CO选择性制H2（英文）

Nano-sized Ni particles on TiO2-SiO2 were synthesized by the two methods of photo-assisted deposition(PAD) and impregnation.H2,which is a promising energy carrier,with a low CO concentration was produced by the photocatalytic reforming of glucose(a model biomass) on the Ni/TiO2-SiO2 catalyst.The supported Ni enhanced the rate of H2 production while it suppressed CO selectivity.The catalysts were characterized by X-ray diffraction,X-ray absorption fine structure,transmission electron microscope,and nitrogen adsorption analysis.Both H2 production and CO selectivity were strongly dependent on the preparation method,and PAD-Ni/TiO2-SiO2 was the better catalyst for H2 production with the lowest CO concentration.     

紫外光照射下 Fe-碳纳米管/TiO2 复合材料降解罗丹明 B

 The composites comprising Fe-carbon nanotubes (CNTs) on TiO2 were prepared by a modified sol-gel method and characterized by nitrogen adsorption, scanning electron microscopy, transmission electron microscopy, X-ray diffraction, and energy dispersive X-ray analysis. The photocatalytic decomposition of rhodamine B (Rh.B) under UV irradiation and air aeration catalyzed by the composites was measured. The photocatalytic activity of TiO2 nanoparticles was significantly enhanced by the large CNT network that facilitated electron transfer between adsorbed Rh.B molecules and the catalyst substrate and the simultaneous occurrence of the photo-Fenton reaction in the presence of Fe particles. A marked acceleration of the decomposition rate was observed with aeration by flowing air aeration due to the formation of the circulatory photo-Fenton system. Chemical oxygen demand of piggery waste was measured at regular intervals to evaluate the mineralization of wastewater.     

溶胶-凝胶法制备Ca10(PO4)6(OH)2 /TiO2复合涂层及其在模拟生理体液中的行为

The composite films consisting of hydroxyapatite (HAP) submicron particles embedded in the gel composed of the titania nanoparticles were prepared on commercial Ti6A14V plates with titania buffer layer obtained by a spin-coating technique. The films were calcined in air at various temperatures, and the bioactivities of the films were investigated by immersing them in acellular simulated body fliud (SBF). X-ray diffraction(XRD), Fourier transform infrared spectroscopy (FTIR), Field emission-scanning electron microscopy(FESEM) and Energy dispersive X-ray (EDS) analysis were employed to investigate the phase formation and structure of the films before and after immersion, and the variations of Ca and P contents in SBF were measured by Inductively Coupled Plasma Spectroscopy(ICP). The results show that the as-prepared films were dense, homogeneous, all well-crystallized, and there was a close interracial bond between the film and the substrate. The characterisatics of the grown layer on the surfaces of the HAP/TiO2 films after immersion in SBF for different periods of time are specially discussed.     

TiO2担载镍催化剂上硝基苯液相加氢（英文）

The catalytic hydrogenation of nitrobenzene to aniline employing nickel impregnated on rutile,anatase,and high surface area titania supports has been investigated.The nickel is present in elemental state as fcc phase on the catalyst as evidenced by X-ray diffraction results.The Ni crystallite size was found to be greater for Ni/anatase.The temperature-programmed reduction results suggest a greater metal-support interaction for Ni/rutile.The observed order of catalytic activity for the hydrogenation of nitrobenzene is Ni/rutile > Ni/anatase > Ni/TiO2.A conversion of 99% was observed for Ni/rutile at 140 oC and hydrogen pressure of 1.96 MPa.Interestingly,aniline is the only product formed which demonstrates the catalytic hydrogenation of nitrobenzene proceeds with atom economy.Both Ni/rutile and Ni/anatase exhibited a better stability than Ni/TiO2.The hydrogenation proceeds with the preferential adsorption of hydrogen on nickel present in the catalyst surface,possibly assisted by TiOx species.     

微乳液合成胶体CuO/γ-Al2O3及其催化芳香硝基化合物还原（英文）

Monodispersed colloidal copper oxide nanoparticles were synthesized by water-in-oil microemulsion using CuCl 2·H2O and NaOH.The effect on CuO particle size was studied by varying the water-to-surfactant molar ratio,precursor concentration and molar ratio of NaOH to CuCl2.The morphology,size and size distribution of the particles were studied by transmission electron microscopy and dynamic light scattering.Dispersion destabilization of the colloidal copper oxide nanoparticles was detected by a Turbiscan apparatus.CuO/γ-Al2O3 catalysts were prepared by dispersing highly stable CuO nanoparticles on γ-alumina by mechanical stirring.The catalysts were analyzed by scanning electron microscopy,transmission electron microscopy,X-ray photoelectron,and X-ray diffraction,which confirmed the uniform dispersion of CuO on the support.The reduction of the nitro aromatic compounds,4-nitrophenol,3-nitrophenol,and 2-nitrophenol,were studied.The CuO/γ-Al2O3 catalysts were active for the reduction of these nitro aromatic compounds.     

水热法合成多孔Ag_2S敏化二氧化钛催化剂及其可见光催化活性(英文)

Porous Ag2S sensitized TiO2 catalysts were synthesized by the hydrothermal process.The crystallization and porous structure of the Ag2S/TiO2 composite photocatalysts were investigated by X-ray diffraction,scanning electron microscopy with energy dispersive X-ray analysis,UV-Vis diffuse reflectance spectroscopy,and N2 adsorption.The Ag2S/TiO2 composites were mainly composed of anatase TiO2 and acanthite Ag2S.The absorption edge wavelengths of TiO2 and the Ag2S/TiO2 composite prepared with 3 mmol Na2S.5H2O were 400 and 800 nm,respectively,that is,the absorption edge of the composite had a pronounced red shift.The photocatalytic activity under visible light was investigated by the degradation of methylene blue with a UV-Vis spectrophotometer.The photocatalytic activities under visible light of the Ag2S/TiO2 photocatalysts were much higher than that of TiO2.     

Intermolecular forces for D2, N2, O2, F2 and CO2

The intermolecular potentials for D₂, N₂, O₂, F₂ and CO₂ are determined on the basis of the second virial coeffincients, the polarizabilities parallel and perpendicular to the molecular axes, and the electric quadrupole moment. The repulsive parts of the potentials are taken from the corresponding Kihara core-potentials. Effects of the octopolar induction are taken into consideration in a unique way. The potential depends on relative orientations of the two molecules as well as the distance r between the molecular centers. This dependence is shown in graphs. A measure of the anisotropy of the potential depth is 0.72 for CO₂ 0.36 for D₂, and smaller than 0.27 for N₂ O₂ and F₂. The remarkable anisotropy for CO₂ and D₂ is due to strong electrostatic quadrupole interactions.     

Zur Trennung von H2, O2, N2, NO, CO, N2O, CO2, C2H6, C2H4, C2H2, NO2(N2O4) und Feuchtigkeit

Ohne Zusammenfassung     

Ionization gauge sensitivities of N2, O2, N2O, NO, NO2, NH3, CClF3 and CH3OH

A Bayard-Alpert (BA) gauge was used to determine apparent relative sensitivites S_rel,X for O₂, N₂O, NO, NO₂, NH₃, CClF₃ and CH₃OH from gauge calibration measurements in the range 1.3×10^–1 Pap1.3·10^–3Pa. Nitrogen was used as a calibration standard.     

Spuren von Fremdgasen (H2, N2, O2, CO2) in Chlor

Ohne Zusammenfassung     

The geometry, vibrational frequencies, thermochemistry, quadrupole moments and electronic structure of C2Na2: Comparison with C2Li2, C2H2, C2F2 and C2Cl2

The electronic structure of Na₂C₂ is studied using ab initio electronic structure methods and is compared to the companion molecule Li₂C₂. Both the linear D_∞h and planar structures are minima on the ground state potential surface with the planar D_2h conformation being the lowest energy form, similar to Li₂C₂. At the CCSD(t) level the planar form is more stable that the linear by 11.2 kcal/mol as compared with 7.34 kcal/mol for Li₂C₂. Both molecules are significantly ionic. The vibrational frequencies, atomization energy at 0 K, D₀, and the standard enthalpy of formation, are calculated and compared to those of Li₂C₂ as well as HCCH, FCCF and ClCCCl. We find D₀ and to be 331.1 and 84.92 kcal/mol for Li₂C₂ and 298.3 and 93.25 kcal/mol for Na₂C₂. We calibrate these by calculating the same quantities for HCCH, FCCF and ClCCCl.     

Vapour-liquid equilibrium data for the systems C2H6 + N2, C2H4 + N2, C3H8 + N2, and C3H6 + N2

High pressure vapour-liquid equilibrium data for the C₂H₆ + N₂, C₂H₄ + N₂, C₃H₈ + N₂, and C₃H₆ + N₂ systems are presented. The data are obtained isothermally in the range from 200 K to 290 K. For each point of data, temperature, pressure and liquid and vapour phase mole fractions are measured.Values for the vapour phase mole fractions are calculated from the obtained pressure, temperature and liquid phase mole fractions. The calculated values are compared with the experimental results, and it is found that the average mean deviation between calculated and experimental mole fractions is less than 0.009 for the systems considered in this work.     

Conversion of NO in NO/N2, NO/O2/N2, NO/C2H4/N2 and NO/C2H4/O2/N2 Systems by Dielectric Barrier Discharge Plasmas

An experimental study on the conversion of NO in the NO/N₂, NO/O₂/N₂, NO/C₂H₄/N₂ and NO/C₂H₄/O₂/N₂ systems has been carried out using dielectric barrier discharge (DBD) plasmas at atmospheric pressure. In the NO/N₂ system, NO decomposition to N₂ and O₂ is the dominating reaction; NO conversion to NO₂ is less significant. O₂ produced from NO decomposition was detected by an on-line mass spectrometer. With the increase of NO initial concentration, the concentration of O₂ produced decreases at 298 K, but slightly increases at 523 K. In the NO/O₂/N₂ system, NO is mainly oxidized to NO₂, but NO conversion becomes very low at 523 K and over 1.6% of O₂. In the NO/C₂H₄/N₂ system, NO is reduced to N₂ with about the same NO conversion as that in the NO/N₂ system but without NO₂ formation. In the NO/C₂H₄/O₂/N₂ system, the oxidation of NO to NO₂ is dramatically promoted. At 523 K, with the increase of the energy density, NO conversion increases rapidly first, and then almost stabilizes at 93–91% of NO conversion with 61–55% of NO₂ selectivity in the energy density range of 317–550 J L⁻¹. It finally decreases gradually at high energy density. A negligible amount of N₂O is formed in the above four systems. Of the four systems studied, NO conversion and NO₂ selectivity of the NO/C₂H₄/O₂/N₂ system are the highest, and NO/O₂/C₂H₄/N₂ system has the lowest electrical energy consumption per NO molecule converted.     

Lithium intercalation into PbNb2S5, PbNbS3, SnNb2Se5, BiVS3, SnVSe3, and PbNb2Se5 misfit layer chalcogenides

The intercalation of lithium into various misfit layer chalcogenides of two different stoichiometries was performed by using n-butyl lithium on powders. The reaction was found to proceed topochemically, and a greater expansion in the c direction and higher lithium contents were observed in the lithiated phases with “MM′₂X₅” approximate stoichiometries compared to “MM′X₃” stoichiometries. This behaviour difference is assigned to the different stacking sequence of the slices of the two sublattices formed by double layers of MX and sandwiches of M′X₂. Lattice distortions are induced during lithiation, leading to changes in the relative orientation of MS-type bilayers and to complete amorphization after long reaction times. The synthesis and partial characterization of a new misfit layer selenide of nominal composition “PbNb₂Se₅” is also reported. The value of the c-dimension (c = 37.3₇ Å) suggests a stacking sequence PbSe---NbSe₂---NbSe₂---PbSe---NbSe₂---NbSe₂, etc. This material becomes highly unstable on lithium intercalation and decomposes to its constituents after a few hours of lithiation.     

High temperature crystal structures and superionic properties of SrCl2, SrBr2, BaCl2 and BaBr2

The structural properties of the binary alkaline-earth halides SrCl₂, SrBr₂, BaCl₂ and BaBr₂ have been investigated from ambient temperature up to close to their melting points, using the neutron powder diffraction technique. Fluorite-structured SrCl₂ undergoes a gradual transition to a superionic phase at 900–1100 K, characterised by an increasing concentration of anion Frenkel defects. At a temperature of 920(3) K, the tetragonal phase of SrBr₂ undergoes a first-order transition to a cubic fluorite phase. This high temperature phase shows the presence of extensive disorder within the anion sublattice, which differs from that found in superionic SrCl₂. BaCl₂ and BaBr₂ both adopt the cotunnite crystal structure under ambient conditions. BaCl₂ undergoes a first-order structural transition at 917(5) K to a disordered fluorite-structured phase. The relationship between the (disordered) crystal structures and the ionic conductivity behaviour is discussed and the influence of the size of the mobile anion on the superionic behaviour is explored.