Photocontrolled Multidirectional Differentiation of Mesenchymal Stem Cells on an Upconversion Substrate

The effective guidance of mesenchymal stem cell (MSC) differentiation on a substrate by near‐infrared (NIR) light is particularly attractive for tissue engineering and regenerative medicine. However, most of current substrates cannot control multidirectional differentiation of MSCs like natural tissues. Herein, a photocontrolled upconversion‐based substrate was designed and constructed for guiding multidirectional differentiation of MSCs. The substrate enables MSCs to maintain their stem‐cell characteristics due to the anti‐adhesive effect of 4‐(hydroxymethyl)‐3‐nitrobenzoic acid modified poly(ethylene glycol) (P1) attached on the upconversion substrate. Upon NIR irradiation, the P1 is released from the substrate by photocleavage. The detachment of P1 can change cell–matrix interactions dynamically. Moreover, MSCs cultured on the upconversion substrate can be specifically induced to differentiate to adipocytes or osteoblasts by adjusting the NIR laser. Our work provides a new way of using NIR‐based upconversion substrate to modulate the multidirectional differentiation of MSCs.     

Improved efficacy of bio‐mineralization of human mesenchymal stem cells on modified PLLA nanofibers coated with bioactive materials via enhanced expression of integrin α2β1

Current therapeutic interventions in bone defects are mainly focused on finding the best bioactive materials for inducing bone regeneration via activating the related intracellular signaling pathways. Integrins are trans‐membrane receptors that facilitate cell‐extracellular matrix (ECM) interactions and activate signal transduction. To develop a suitable platform for supporting human bone marrow mesenchymal stem cells (hBM‐MSCs) differentiation into bone tissue, electrospun poly L‐lactide (PLLA) nanofiber scaffolds were coated with nano‐hydroxyapatite (PLLA/nHa group), gelatin nanoparticles (PLLA/Gel group), and nHa/Gel nanoparticles (PLLA/nHa/Gel group) and their impacts on cell proliferation, expression of osteoblastic biomarkers, and bone differentiation were examined and compared. MTT data showed that proliferation of hBM‐MSCs on PLLA/nHa/Gel scaffolds was significantly higher than other groups (P < .05). Alkaline phosphatase activity was also more increased in hBM‐MSCs cultured under osteogenic media on PLLA/nHa/Gel scaffolds compared to others. Gene expression evaluation confirmed up‐regulation of integrin α2β1 as well as the osteogenic genes BGLAP, COL1A1, and RUNX2. Following use of integrin α2β1 blocker antibody, the protein level of integrin α2β1 in cells seeded on PLLA/nHa/Gel scaffolds was decreased compared to control, which confirmed that most of the integrin receptors were bound to gelatin molecules on scaffolds and could activate the integrin α2β1/ERK axis. Collectively, PLLA/nHa/Gel scaffold is a suitable platform for hBM‐MSCs adhesion, proliferation, and osteogenic differentiation in less time via activating integrin α2β1/ERK axis, and thus it might be applicable in bone tissue engineering.     

Preparation and characterization of composite nanofibers of polycaprolactone and nanohydroxyapatite for osteogenic differentiation of mesenchymal stem cells

Nanocomposites of nanohydroxyapatite (nHAP) dispersed in poly(?-caprolactone) (PCL) were prepared by electrospinning (ES) to obtain PCL/nHAP nanofibers. Nanofibers with similar diameters (340 ± 30 nm) but different nHAP concentrations (0-50%) were fabricated and studied for growth and osteogenic differentiation of bone marrow mesenchymal stem cells (MSCs). The nanofibrous membranes were subjected to detailed analysis for its physicochemical properties by scanning electron microscopy (SEM), thermogravimetric analysis, X-ray diffraction, Fourier-transform infrared spectroscopy, and mechanical tensile testing. nHAP particles (~30 nm diameter) embedded in nanofibers increased the nanofibrous membrane's ultimate stress and the elastic modulus, while decreased the strain at failure. When cultured under an osteogenic stimulation condition on nanofibers, MSCs showed normal phenotypic cell morphology, and time-dependent mineralization and osteogenic differentiation from SEM observations and alkaline phosphatase activity assays. The nanofibers could support the growth of mesenchymal stem cells without compromising their osteogenic differentiation capability up to 21 days and the enhancement of cell differentiation by nHAP is positively correlated with its concentration in the nanofibers. Energy dispersive X-ray analysis of Ca and P elements indicated mineral deposits on the cell surface. The mineralization extent was significantly raised in nanofibers with 50% nHAP where a Ca/P ratio similar to that of bone was found. The present study indicated that electrospun composite PCL/nHAP nanofibrous membranes are suitable for mineralization of MSCs intended for bone tissue engineering.     

Engineering Substrate Topography at the Micro‐ and Nanoscale to Control Cell Function

The interaction of mammalian cells with nanoscale topography has proven to be an important signaling modality in controlling cell function. Naturally occurring nanotopographic structures within the extracellular matrix present surrounding cells with mechanotransductive cues that influence local migration, cell polarization, and other functions. Synthetically nanofabricated topography can also influence cell morphology, alignment, adhesion, migration, proliferation, and cytoskeleton organization. We review the use of in vitro synthetic cell–nanotopography interactions to control cell behavior and influence complex cellular processes, including stem‐cell differentiation and tissue organization. Future challenges and opportunities in cell–nanotopography engineering are also discussed, including the elucidation of mechanisms and applications in tissue engineering.     

Three-dimensional scaffolds for tissue engineering: the importance of uniformity in pore size and structure

To validate the importance of uniformity in pore size and structure of a scaffold for tissue engineering, we fabricated two types of scaffolds with uniform (inverse opal scaffolds) and nonuniform pore sizes and structures, and then evaluated their properties in terms of diffusion of macromolecules, spatial distribution of fibroblasts, and differentiation of preosteoblasts. Our results confirmed the superior performance of the inverse opal scaffolds due to the uniform pore size, homogeneous environment, and high interconnectivity: a higher diffusion rate, a uniform distribution of cells, and a higher degree of differentiation. In addition, we found that both the differentiation of cells and secretion of extracellular matrix were dependent on the properties of the individual pore to which the cells were attached, rather than the bulk properties of a scaffold. Our results clearly indicate that inverse opal scaffolds could provide a better microenvironment for cells in comparison to a scaffold with nonuniform size and structure.     

Modifying the Pores of an Inverse Opal Scaffold With Chitosan Microstructures for Truly Three‐Dimensional Cell Culture

Inverse opal scaffolds have recently emerged as a novel class of scaffolds with uniform and controllable pore sizes for tissue engineering to provide better nutrient transport, a uniform cell distribution, and an adjustable microenvironment for cell differentiation. However, when the pore size of the scaffold is much larger than the dimension of a cell, the cell actually encounters a local 2D environment and the void space associated with the pore can not be efficiently utilized. Here, we demonstrate that a truly 3D microenvironment can be created inside a pore by further functionalizing the as‐prepared inverse opal scaffold with a second polymer by freeze‐drying. The resultant inverse opal scaffold with hierarchically structured pores can enhance both cell proliferation and tissue infiltration.     

Mouse bone marrow‐derived mesenchymal stem cell response to nanostructured titanium substrates produced by high‐pressure torsion

Mesenchymal stem cells (MSCs) with the ability to differentiate into various mesoderm‐like cells are known to migrate to various organs to repair injured tissues. They can attach to the implant surface, differentiate into bone‐forming cells, and ultimately osseointegrate with the prosthesis. This study investigates bone marrow‐derived mesenchymal stem cellular response to the grain structure of titanium substrates produced by high‐pressure torsion and annealing processes. Cell attachment, proliferation, viability, and morphology are evaluated on the surface of differently processed nanostructured and coarse‐grained samples. The bacterial adhesion and calcium phosphate crystal formation and growth are also assessed on the surface of the substrates. The nanostructured titanium shows significantly higher cell adhesion, proliferation, spreading, and viability compared with the untreated and coarse‐grained titanium substrates. The adhesion of bacteria is lower and surface bioactivity is higher on the surface of the nanostructured titanium substrate. The results demonstrate the superior MSC compatibility, antibacterial efficacy, and surface bioactivity of the nanostructured titanium substrates, which could lead to early implant fixation and improved osseointegration. Copyright © 2012 John Wiley & Sons, Ltd.     

A Generic Micropatterning Platform to Direct Human Mesenchymal Stem Cells from Different Origins Towards Myogenic Differentiation

Human mesenchymal stem cells (MSCs) derived from various origins show varied differentiation capability. Recent work shows that cell shape manipulation via micropatterning can modulate the differentiation of bone‐marrow‐derived MSCs. Herein, the effect of micropatterning on the myogenesis of MSCs isolated from three different sources (bone marrow, fetal tissue, and adipose) is reported. All the well‐aligned cells, regardless of source, predominantly commit to myogenic lineage, as shown by the significant upregulation of myogenic gene markers and positive myosin heavy chain staining. It is demonstrated that our novel micropattern can be used as a generic platform for inducing myogenesis of MSCs from different sources and may also have the potential to be extended to induce other lineage commitment.

     

骨及生物材料中的纳米磷酸钙

纳米磷酸钙在自然界骨组织的形成过程中起到了关键作用。尽管骨的类型有所不同,但在其初级结构中的无机成分都是纳米磷酸钙。纳米磷酸钙结构能够给予骨良好的机械性能和生物学活性。在生物体中,无机纳米磷酸钙在有机基质的调控下能定向自组装成特定的生物矿物。体外细胞实验显示小尺寸纳米羟基磷灰石更能促进骨髓基质干细胞的增殖,而同尺寸的结晶型纳米磷酸钙则比无定形磷酸钙更能利于干细胞分化。鉴于纳米磷酸钙具有很好的生物相容性和骨诱导性,可以发展成为理想的生物材料常用于骨组织工程和生物医学。     

骨及生物材料中的纳米磷酸钙

纳米磷酸钙在自然界骨组织的形成过程中起到了关键作用。尽管骨的类型有所不同,但在其初级结构中的无机成分都是纳米磷酸钙。纳米磷酸钙结构能够给予骨良好的机械性能和生物学活性。在生物体中,无机纳米磷酸钙在有机基质的调控下能定向自组装成特定的生物矿物。体外细胞实验显示小尺寸纳米羟基磷灰石更能促进骨髓基质干细胞的增殖,而同尺寸的结晶型纳米磷酸钙则比无定形磷酸钙更能利于干细胞分化。鉴于纳米磷酸钙具有很好的生物相容性和骨诱导性,可以发展成为理想的生物材料常用于骨组织工程和生物医学。     

Scaffold Effects on Osteogenic Differentiation of Equine Mesenchymal Stem Cells: An In Vitro Comparative Study

The in vitro viability, osteogenic differentiation, and mineralization of four different equine mesenchymal stem cells (MSCs) from bone marrow, periosteum, muscle, and adipose tissue are compared, when they are cultured with different collagen‐based scaffolds or with fibrin glue. The results indicate that bone marrow cells are the best source of MSCs for osteogenic differentiation, and that an electrochemically aggregated collagen gives the highest cell viability and best osteogenic differentiation among the four kinds of scaffolds studied.

     

Regulation of mesenchymal stem cell adhesion and orientation in 3D collagen scaffold by electrical stimulus

Cell adhesion and orientation are important for both natural and engineered tissues to fully achieve physiologic functions. Based on diverse cellular responses induced by electrical stimulus on 2D substrate, we applied non-invasive electrical stimulus to regulate cell adhesion and orientation of bone marrow-derived mesenchymal stem cells (MSCs) and fibroblasts in a reconstituted 3D collagen-based scaffold. While fibroblasts were induced to reorient perpendicularly in response to direct current electrical stimulus, rat MSCs showed only slight changes in cell reorientation. Multiphoton microscopy revealed that rat MSCs exhibited much stronger 3D adhesion, which appears to resist cell reorientation. Only in response to a large electrical stimulus (e.g., 10 V/cm), collagen fibers around rat MSCs became disconnected and loosely reorganized. In contrast, the collagen fibers surrounding the fibroblasts were entangled in a random network and became preferentially aligned in the direction of the electrical stimulus. When incubated with integrin antibodies, both fibroblasts and rat MSCs failed to respond to electrical stimulus, providing evidence that integrin-dependent molecular mechanisms are involved in 3D cell adhesion and orientation. Elucidation of physical regulation of 3D cell adhesion and orientation may offer a novel approach in controlling cell growth and differentiation and could be useful for stem cell-based therapeutic application and engineering tissue constructs.     

Recruitment of endogenous stem cells for tissue repair

The traditional concept of stem cell therapy envisions the isolation of stem cells from patients, propagation and differentiation in vitro, and subsequent re-injection of autologous cells into the patient. There are many problems associated with this paradigm, particularly during the in vitro manipulation process and the delivery and local retention of re-injected cells. An alternative paradigm that could be easier, safer, and more efficient, would involve attracting endogenous stem cells and precursor cells to the defect site for new tissue regeneration. Hepatocyte growth factor (HGF), a pleiotropic cytokine of mesenchymal origin, exerts a strong chemoattractive effect on mesenchymal stem cells (MSCs) and neural stem cells (NSCs), and induces migration of MSCs in vitro. However, HGF undergoes rapid proteolysis in vivo, which results in a very short lifetime of the bioactive cytokine. To maintain the therapeutic level of HGF at the defect site necessary for endogenous stem cell recruitment, sustained, long-term, and localized delivery of HGF is required. Thiol-modified glycosaminoglycans hyaluronan (HA) and heparin (HP), combined with modified gelatin (Gtn), have been crosslinked with poly(ethylene glycol) diacrylate (PEGDA) to afford semisynthetic ECM-like (sECM) hydrogels that can both provide controlled growth factor release and permit cell infiltration and proliferation. Herein we compare the use of different sECM compositions for controlled release of HGF and concomitant recruitment of human bone marrow MSCs into the scaffold in vitro. [Figure: see text].     

Adhesive peptides conjugated PAMAM dendrimer as a coating polymeric material enhancing cell responses

This present work aims to functionalize poly(amidoamine) (PAMAM) dendrimers with various reported adhesive peptides, including Arg-Gly-Asp (RGD), Tyr-Ile-Gly-Ser-Arg (YIGSR), and Ile-Lys-Val-Ala-Val (IKVAV) for enhancing cell responses. The RGD, YIGSR, or IKVAV functionalized PAMAM coated substrate could promote cell adhesion of bone marrow mesenchymal stem cells (BMSCs) within 1 h after incubation. The neurite differentiation and proliferation of pheochromocytoma (PC12) cells were also significantly enhanced after culturing on the peptide functionalized PAMAM dendrimers for two and four days. This peptide functionalized PAMAM dendrimers are considered as the potential candidates for various tissue engineering applications.     

Laponite–Gelatin Nanofibrous Microsphere Promoting Human Dental Follicle Stem Cells Attachment and Osteogenic Differentiation for Noninvasive Stem Cell Transplantation

Nanofibrous microspheres (NFM) are emerging as prominent next-generation biomimetic injectable scaffold system for stem cell delivery and different tissue regeneration where nanofibrous topography facilitates ECM-like stem cells niches. Addition of osteogenic bioactive nanosilicate platelets within NFM can provide osteoconductive cues to facilitate matrix mediated osteogenic differentiation of stem cells and enhance the efficiency of bone tissue regeneration. In this study, gelatin nanofibrous microspheres are prepared containing fluoride-doped laponite XL21 (LP) using the emulsion mediated thermal induce phase separation (TIPS) technique. Systematic studies are performed to understand the effect of physicochemical properties of biomimicking NFM alone and with different concentrations of LP on human dental follicle stem cells (hDFSCs), their cellular attachment, proliferation, and osteogenic differentiation. The study highlights the effect of LP nanosilicate with biomimicking nanofibrous injectable scaffold system aiding in enhancing stem cell differentiation under normal physiological conditions compared to NFM without LP. The laponite–NFM shows suitability as excellent injectable biomaterials system for stem cell attachment, proliferation and osteogenic differentiation for stem cell transplantation and bone tissue regeneration.     

生物材料表面性能调控骨髓间充质干细胞分化

结合细胞和生物可降解支架的组织工程和再生医学技术为组织、器官的修复和再生提供了一种新途径。骨髓间充质干细胞(BMSCs)具有多向分化潜能,因其取材简单、来源广泛、增殖能力强,无伦理争议,免疫排斥反应小而备受关注。BMSCs在特定区域定向分化成为靶细胞是干细胞治疗的一个重要前提,尤其受到生物材料表面正负电荷、亲疏水和不同的拓扑结构的影响。材料表面涂层蛋白或接枝多肽能够促进BMSCs的分化能力,而生物材料不同的机械性能、几何形状也会影响BMSCs的分化方向。本文综述了近期生物材料调控BMSCs分化的研究结果,为基于BMSCs的组织工程和再生医学材料的设计提供借鉴和指导。     

Molecular Mechanism Study on Effect of Biodegradable Amino Acid Ester–Substituted Polyphosphazenes in Stimulating Osteogenic Differentiation

Amino acid ester substituted polyphosphazenes are osteoactive benefiting from their phosphorus‐containing chemical structure, which highlights interests in bone tissue engineering. To correlate their chemical structures with cell activities, in this study, poly[(ethyl alanato)_0.3(ethyl glycinato)_0.7phosphazene] (PAGP) and poly[(ethyl phenylalanato)_0.3(ethyl glycinato)_0.7phosphazene] (PPGP) are synthesized to carry out studies on cell osteogenic differentiation. In the non‐contact culture manner, bone mesenchymal stromal cells (BMSCs) are cultured in transwell chambers containing PAGP or PPGP films, while the cells and the materials do not contact. In the contact culture manner, BMSCs are cultured on the PAGP or PPGP films. In the meantime, solutions containing PAGP or PPGP degradation products (i.e., phosphate, ammonium, and corresponding amino acids) are applied for cell culture using inorganic phosphate (Pi) ion as control. Thus, the influences from substrate surface and degradation products can be identified separately. The results reveal that both the phosphorus‐containing surface of PAGP and PPGP films and their degradation products play significant roles in regulating cell behaviors. In comparison with PAGP, PPGP seems able to provide relatively stable phosphorus‐containing surface to strengthen the cell‐scaffold interaction because of its slower degradation rate and higher Young's modulus, leading to greater promotion in osteogenic differentiation via contact effect.     

中国小型猪骨髓间充质干细胞的蛋白质组研究

报道了骨髓间充质干细胞(MSCs)的蛋白质组表达研究。从体外培养的MSCs提取细胞蛋白,经二维电泳分离后用银染方法可检出蛋白点约1600个,选取48个蛋白点进行胶内酶解及质谱分析,经数据库检索成功鉴定了37个蛋白,并对蛋白功能进行初步分析。本实验数据为进一步分析MSCs增殖、分化或凋亡的分子机理提供相关信息。     

Assembly of three-dimensional polymeric constructs containing cells/biomolecules using carbon dioxide

Using low-pressure carbon dioxide (CO2), we demonstrated a novel and versatile approach to assembling polymeric constructs in the presence of cells and/or biomolecules in an aqueous environment. By regulating the CO2 pressure, the assembly was completed at biologically permissive temperatures with excellent preservation of the original structures. We further demonstrated that mammalian cells can survive the CO2-assisted bioassembly process (37 degrees C, 1.38 MPa, approximately 1 h). Human mesenchymal stem cells from bone marrow (hMSCs) exhibited the same cell morphology and proliferation potential as the untreated control. Mouse embryonic stem cells (mESCs) maintained ES-specific Oct-4 gene expression and differentiation potential after CO2 treatment as well. This method highlights the ability to construct multiple biodegradable polymeric scaffolds with well-defined architecture, on which various types of cells were grown, into a predesigned three-dimensional complex. In addition, protein and DNA bioactivity can be preserved in the context of a CO2-assisted assembly. This CO2-assisted bioassembly method provides for a manufacturing platform that, thus far, has been lacking in the fields of tissue engineering, cell-based biochips, cell therapy, and drug delivery.     

Acceleration of osteogenic differentiation by sustained release of BMP2 in PLLA/graphene oxide nanofibrous scaffold

After about three decades of experience, tissue engineering has become one of the most important approaches in reconstructive medical research to treat non‐self‐healing bone injuries and lesions. Herein, nanofibrous composite scaffolds fabricated by electrospinning, which containing of poly(L‐lactic acid) (PLLA), graphene oxide (GO), and bone morphogenetic protein 2 (BMP2) for bone tissue engineering applications. After structural evaluations, adipose tissue derived mesenchymal stem cells (AT‐MSCs) were applied to monitor scaffold's biological behavior and osteoinductivity properties. All fabricated scaffolds had nanofibrous structure with interconnected pores, bead free, and well mechanical properties. But the best biological behavior including cell attachment, protein adsorption, and support cells proliferation was detected by PLLA‐GO‐BMP2 nanofibrous scaffold compared to the PLLA and PLLA‐GO. Moreover, detected ALP activity, calcium content and expression level of bone‐related gene markers in AT‐MSCs grown on PLLA‐GO‐BMP2 nanofibrous scaffold was also significantly promoted in compression with the cells grown on other scaffolds. In fact, the simultaneous presence of two factors, GO and BMP2, in the PLLA nanofibrous scaffold structure has a synergistic effect and therefore has a promising potential for tissue engineering applications in the repair of bone lesions.