光子晶体耦合波导实现光开关效应的研究

提出了一种基于光子晶体耦合波导实现光开关效应的方法:将线缺陷引入二维光子晶体以形成两平行的邻近波导,两邻近波导及其中间的两排介质柱构成了光开关模型耦合区;利用平面波展开法计算了不同介质填充率情况下的色散特性.结果发现:减小介质填充率可以实现波导耦合长度的减小;分段调整中间介质柱的填充率和选择不同的耦合搭配长度,定向耦合...     

Polarization-independent grating couplers for silicon-on-insulator nanophotonic waveguides

We propose the use of subwavelength structures in a waveguide grating to achieve polarization-independent coupling of light between an optical fiber and a silicon-on-insulator (SOI) optical waveguide. The subwavelength structure allows the mode effective indices of the TE and TM modes in the grating section to be precisely engineered. We calculate that coupling efficiency of over 64% is possible using the proposed design for polarization-independent coupling between single-mode optical fibers and SOI nanophotonic waveguides.     

Bi-wavelength two dimensional chirped grating couplers for low cost WDM PON transceivers

We propose and demonstrate a bi-wavelength two dimensional (2D) waveguide grating coupler on silicon-on-insulator which has efficient coupling of optical light with two-wavelength bands independently between standard optical single mode fibers and nanophotonic waveguides. The details of design are described and the measurement results as well as system performance are experimentally characterized. The bi-wavelength grating coupler can be used as wavelength-division-multiplexing (WDM) splitter/combiner for monolithically silicon integrated transceivers, potentially meeting the low cost requirements for future WDM passive optical network (PON).     

Grating-assisted coupling of optical fibers and photonic crystal waveguides

We propose and analyze a highly efficient method of coupling light from optical fibers to two-dimensional photonic crystal waveguides. Efficient coupling is achieved by positioning of a tapered fiber parallel to the linear defect, where the photonic crystal's cladding functions as a grating coupler and provides field confinement as well. Numerical simulations indicate that better than 90% transmission is possible with a full width at half-magnitude bandwidth of 12nm. It is shown that one can increase the bandwidth by increasing the field overlap between the two waveguides.     

分布反馈量子级联激光器光栅反馈特性北大核心CSCD

为探究Bragg光栅结构对TM模反馈特性的影响,利用有限时域差分法对具有TM模的分布反馈(DFB)量子级联激光器Bragg光栅结构进行仿真研究。重点分析了侧向耦合光栅的光学特性以及光栅侧壁倾角对光栅反射谱、损耗的影响及原因,并探究了光栅刻蚀深度及占空比与TM模的耦合系数、损耗的关系。结果表明有效折射率是影响Bragg波长的主要因素,而光限制因子是不同周期的侧向耦合光栅结构耦合系数产生巨大差别的原因,当光栅侧壁倾角90°时镜面损耗最小。光栅周期、占空比、刻蚀深度与耦合系数的关系表明:这些参数不仅影响光栅的相对介电常数,也会对光限制因子产生作用,从而影响耦合系数的大小;耦合系数与刻蚀深度具有正比关系,大周期光栅耦合系数随占空比的变化率较小。对光栅光反馈特性的理论研究有利于提升对DFB量子级联激光器的认识,促进激光器性能的提升和发展。     

Compact double-layer subwavelength binary blazed grating 1×4 splitter based on silicon-on-insulator

We describe a compact double-layer waveguide grating splitter that not only achieves efficient coupling between single mode fiber and a silicon-on-insulator optical waveguide but also realizes effective splitting. By appropriate choice of waveguide/grating parameters, including thicknesses, periods, height, and fill factor to optimize the mode matching, coupling efficiency is improved and the value of power difference of each output port is also significantly decreased. The maximum of power difference between four output ports is about 6.2%; however, the minimum value is only 0.6% or so. Moreover, the average power difference of four output ports is lower than 10% for TE polarization light over the 10?nm wavelength bandwidth centered at 1.54?μm. In addition, the splitter structure has the best tolerance for grating fabrication with deviations of grating depth 90?nm.     

Design for broadband high-efficiency grating couplers

In this Letter, we propose general optimization methods to design broadband high-efficiency grating couplers for planar waveguides. We attribute the coupling bandwidth to the mismatch of effective indices between the diffracted beam and the actual grating structure around the operation wavelength for fiber to waveguide excitation. The coupling bandwidth formula is deduced. A simple parameter-separate optimization procedure is proposed for general layered grating couplers for high coupling efficiency. Using our principle, we optimized a grating coupler for a horizontal slot waveguide operating at wavelength 1.55 μm for TM polarization. The grating coupler has 1 dB bandwidth of 60 nm and coupling efficiency of 65% with incident light from single-mode optical fiber (SMF) at 8°.     

Apodized grating coupler using fully-etched nanostructures

A two-dimensional apodized grating coupler for interfacing between single-mode fiber and photonic circuit is demonstrated in order to bridge the mode gap between the grating coupler and optical fiber. The grating grooves of the grating couplers are realized by columns of fully etched nanostructures, which are utilized to digitally tailor the effective refractive index of each groove in order to obtain the Gaussian-like output diffractive mode and then enhance the coupling efficiency.Compared with that of the uniform grating coupler, the coupling efficiency of the apodized grating coupler is increased by 4.3% and 5.7%, respectively, for the nanoholes and nanorectangles as refractive index tunes layer.     

Coupling coefficients of gratings with graded refractive index waveguides

In this paper, the effective coupling coefficient κeff and the self-coupling coefficient ζ1 are introduced to describe the characteristic of gratings in a resonant situation when the effects of radiation and other partial waves coupling are considered. The dependence of these two coupling coefficients on grating tooth shapes and depths and the dimensions of graded refractive index (GRIN) waveguides is numerically analysed. The results show that the gratings with linear GRIN waveguides have the largest |κeff|. The possibility of realizing a complex-coupled DFB laser, even a pure gain or loss coupled DFB laser, employing only a real refractive index coupled grating is also discussed. This revised version was published online in November 2006 with corrections to the Cover Date.     

Grating couplers for thick SOI rib waveguides

The use of grating couplers in high index contrast waveguides like silicon on insulator (SOI) offers several advantages over other coupling approaches, including better alignment tolerances and allowing for wafer-scale testing. The grating couplers were developed for nanometric SOI waveguides (Si-wires), and recently also for micrometric rib waveguides. In this paper we review our work in fiber-to-chip grating couplers for thick SOI rib waveguides, where a coupling efficiency of ?2.2?dB was demonstrated experimentally. We also discuss the use of grating couplers to improve optical throughput (étendue) of a planar waveguide Fourier-Transform (FT) spectrometer implemented in thick rib waveguides.     

High efficiency grating couplers based on shared process with CMOS MOSFETs

Grating couplers are widely investigated as coupling interfaces between silicon-on-insulator waveguides and optical fibers.In this work,a high-efficiency and complementary metal-oxide-semiconductor(CMOS) process compatible grating coupler is proposed.The poly-Si layer used as a gate in the CMOS metal-oxide-semiconductor field effect transistor(MOSFET) is combined with a normal fully etched grating coupler,which greatly enhances its coupling efficiency.With optimal structure parameters,a coupling efficiency can reach as high as ～ 70% at a wavelength of 1550 nm as indicated by simulation.From the angle of fabrication,all masks and etching steps are shared between MOSFETs and grating couplers,thereby making the high performance grating couplers easily integrated with CMOS circuits.Fabrication errors such as alignment shift are also simulated,showing that the device is quite tolerant in fabrication.     

Design of an augmented reality display based on polarization grating

A new optical system for an augmented reality(AR) display is proposed in this paper.The optical system mainly includes a ray deflector, coupling input grating, optical waveguide, and coupling output grating.Both the ray deflector and the coupling input grating are designed based on the diffraction characteristics of the polarization grating, and the coupling output grating is the Bragg reflection grating.Compared with other AR schemes, this AR optical system not only reduces the number of projections from two to one, but also improves the efficiency of light coupling into the optical waveguides.The energy loss is reduced by utilizing the single-order diffraction characteristics of the polarization grating in its coupling input structure.The light deflector uses the polarization selectivity of the polarization grating and the characteristics of the rotating light of the twisted nematic liquid crystal layer to realize beam deflection.The working principle of the optical system is experimentally and theoretically demonstrated.     

Gradient-index antireflective subwavelength structures for planar waveguide facets

We demonstrate the use of subwavelength gratings etched into the facets of silicon-on-insulator ridge waveguides as a means of reducing facet reflectivity by the gradient-index effect. Reflectivities as low as 2.0% and 2.4% for the fundamental TE and TM modes, respectively, are demonstrated experimentally for light of 1.55 microm wavelength, in agreement with both effective medium theory and finite-difference time domain calculations. Simulations show that facet reflectivites can be further reduced to less than 1% by increasing the grating modulation depth.     

Single etch grating couplers for mass fabrication with DUV lithography

Surface grating couplers enable efficient coupling of light between optical fibers and planar waveguide circuits. While traditional grating designs require two etch steps for efficient coupling to silicon-on-insulator waveguides, recently proposed subwavelength structured gratings can achieve the same coupling efficiencies with a single etch step, thereby significantly reducing fabrication complexity. Here we demonstrate that such couplers can be fabricated on a large scale with ultra-violet lithography, achieving a 5?dB coupling efficiency at 1,550?nm. Through both simulations and experiments we give physical insight on how pattern fidelity impacts the performance of these couplers, and propose strategies to deal with inevitable process variations.     

Two-dimensional colloidal crystal corrugated waveguides

We demonstrate, for what is to our knowledge the first time, two-dimensional (2D) corrugated waveguides at optical wavelengths obtained by use of 2D colloidal crystals. We report experimental studies of light coupling into and out of the waveguide structure. The diffracted light shows interesting optical properties that exist only in such 2D grating structures. Field distribution of the fundamental mode in the structure is studied by use of a simplified model in our analysis. Potential applications of this type of structure are discussed.     

小尺寸低折射率差硅基二氧化硅阵列波导光栅

随着AWG型器件在光通信系统中的大规模应用,对低成本AWG芯片的需求越来越多。在各种降成本方案中,减小AWG芯片的尺寸是最有效的方法之一。本文介绍了一种新型小尺寸低折射率差硅基二氧化硅阵列波导光栅（AWG）的设计。在该AWG中,输入波导/输出波导与平板波导连接的部分制作成两侧为空气槽的高折射率差波导,所以在与输出平板波导连接处的相邻输出波导间距较小,这样可以在设计上缩短平板波导的长度、减少阵列波导的数量,实现较小的AWG芯片尺寸。该AWG的其它部分,如输入/输出波导与光纤耦合的部分、阵列波导光栅等均采用常规的低折射率波导工艺,所以就同时具有与常规的低折射率波导AWG相同的优点：如低耦合损耗、较好的串扰以及光学特性等。根据这个原理,设计了一种40通道100 GHz频率间隔的低折射率差硅基二氧化硅AWG,其芯片尺寸只有23.88 mm?10.5 mm,是传统相同材料制作的AWG尺寸的1/6。     

光子晶体异质结耦合波导光开关

以二维三角晶格光子晶体为研究对象,在该光子晶体中引入两行平行的单模线缺陷波导,以一行耦合介质柱为间距,通过调节部分耦合介质柱的折射率,构筑了光子晶体异质结耦合波导光开关结构。利用平面波展开法和定向耦合原理计算了在不同入射光频率下,缺陷波导间耦合介质柱的折射率不同时的耦合长度,确定了合适的光子晶体异质结耦合波导光开关的结构参数。利用时域有限差分法研究了该光开关中耦合介质柱的折射率变化及异质结构介质柱的位置分布对光信号输出路径的影响。结果表明,通过改变该结构中耦合介质柱的折射率可以改变光的输出路径,可实现光的开关行为。并且异质结构介质柱位置的随机分布对该光开关的影响不大,有助于光子晶体新型滤波器、定向耦合器、波分复用器以及光开关等光子器件的研究。     

Optical properties of sub-wavelength dielectric gratings and their application for surface-enhanced Raman scattering

We fabricated and measured the far-field optical properties of a sub-wavelength Si₃N₄ (silicon nitride) two dimensional grating. Frequency-dependent transmission measurements from a white-light source revealed that both transverse magnetic (TM) and transverse electric (TE) modes were excited on the grating. We determined the dispersion relations of the modes by tilting the sample with respect to the incoming light beam and measuring the frequency shift of the absorption features. By comparing to a simple model, we determined the effective refractive index for the TM and TE modes and the geometrical constants for the grating. This information enables gratings with desired optical properties to be designed and fabricated. The application of the sub-wavelength grating for surface-enhanced Raman scattering (SERS) is demonstrated.     

含色散介质的一维光子晶体微腔中简正耦合模的物理图像

对一维光子晶体中的色散介质采用洛伦兹振子模型,对线性层及色散δ层均采用传输矩阵的方法,研究了一维含色散介质的光子晶体微腔中的简正耦合模.通过改变洛伦兹振子和微腔之间的失谐频率,分析了简正耦合模频率的变化情况.在失谐频率比较大时,光与洛仑兹振子间的耦合作用较小,简正耦合模中的一个接近腔模频率,而另一个则接近洛仑兹振子的共振频率;在失谐频率比较小时,光与洛仑兹振子间的耦合作用较大,简正耦合模与未耦合的腔模频率和洛仑兹振子的共振频率之间的差别较为明显.最后通过引进该结构的复有效折射率,对含色散介质的系统,由于带隙中间的共振模被湮灭并分裂为左右两个耦合模,其复有效折射率虚部在原共振峰处跃变为一较大值,而在新生成的两个耦合模附近趋近于零,光与色散介质相互耦合而形成的腔极化激元的物理图像十分清晰.     

A Novel Design of Grating Couplers for Efficient Broadband Coupling between Silicon-on-Insulator Nanophotonic Waveguides and Fibres

A novel design of out-of-plane grating couplers is proposed for coupling between silicon-on-insulator nanophotonic waveguides and single-mode fibres. The coupler with the first-order diffraction coupling to the optical fibre is actually a second-order reflected grating with two times of period of the first-order grating. To enhance outcoupled power, a back hole is designed to form in the silicon substrate and a kind of metals is placed on the top acting as a reflection layer. The coupler is optimized using coupled-mode-based simulations, showing that the coupling efficiency to and from tapered optical fibre can be as high as 85% with 1dB bandwidth about 23 nm.