Ternary Ag/Polyaniline/Au nanocomposites: Preparation,characterization and electrochemical properties

Ternary Ag/Polyaniline/Au nanocomposites were synthesized successfully by immobilizing of Au nanoparticles (NPs) on the surface of Ag/Polyaniline (PANI) nanocomposites. Ag/PANI nanocomposites were prepared via in situ chemical polymerization of aniline in the presence of 4-aminothiophenol (4-ATP) capped silver colloidal NPs. Then, uniform gold (Au) NPs were assembled on the surface of resulted Ag/PANI nanocomposites through electrostatic interaction to get Ag/Polyaniline/Au nanocomposites. The nanocomposites were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDX), ultraviolet visible spectroscopy (UV-Vis), thermogravimetric analysis (TGA) and Fourier transform infrared spectroscopy (FTIR). Moreover, Ag/PANI/Au nanocomposites were immobilized on the surface of a glassy carbon electrode and showed enhanced electrocatalytic activity for the reduction of H₂O₂ compared with Ag/PANI.     

Effect of Glass Substrates on the Formation of Gold-Silver Colloids in Nanocomposite Thin Films

A sol-gel route to synthesize nanocomposite thin films containing phase separated metal colloids of gold (Au) and silver (Ag) was developed. Ag—Au colloids were prepared in silica films using dip coating technique. The annealing of the samples in air results in the formation of phase separated Ag and Au colloids in SiO₂ thin films, showing the surface plasmon peaks at 410 nm and 528 nm. For the synthesis of phase separated Ag and Au colloids on float glass substrates, formation of the silver colloids was found strongly dependent on the surface of the float glass. On the tin rich surface formation of both gold and silver colloids took place, whereas, on the tin poor surface the formation of only gold colloids was observed. The surface dependence of the formation of silver colloids was attributed to the presence of tin as Sn²⁺ state on the glass surface, which oxidizes into Sn⁴⁺ during heat treatment, reducing Ag⁺ into silver colloids.     

Properties of conducting films of electrophoretic concentrates of silver and gold nanoparticles in AOT surfactant

Liquid concentrates of silver and gold nanoparticles with 1–2 M metal concentrations were isolated by electrophoresis in a capacitor-type cell from AOT reverse micellar solutions in n-decane. The electrophoretic concentrates and the starting micellar solutions were characterized by nonaqueous electrophoresis, transmission electron microscopy, photon correlation spectroscopy (dynamic light scattering), and spectrophotometry. The hydrodynamic diameter of silver and gold nanoparticles was 13.2 and 8.6 nm, respectively; the ζ-potential was 70 and 13 mV. The drying of the concentrates on glass and silicon substrates and subsequent treatment with a 30% solution of water in ethanol gave mirror conducting Ag, Au, Ag-Au, and Au/Ag films containing on the average 80% metal and 20 wt % AOT. The film structure, morphology, and composition were studied by scanning electron microscopy (SEM) and energy dispersion analysis (EDX).     

Observing Initial Steps in Gold‐Catalyzed Alkyne Transformations by Utilizing Bodipy‐Tagged Phosphine–Gold Complexes

The Pd‐catalyzed reactions of 3‐chloro‐bodipy with R₂PH (R=Ph, Cy) provide nonfluorescent bodipy–phosphines 3‐PR₂–bodipy 3 a (R=Ph) and 3 b (R=Cy; quantum yield Φ<0.001). Metal complexes such as [AgCl( 3 b )] and [AuCl( 3 b )] were prepared and shown to display much higher fluorescence (Φ=0.073 and 0.096). In the gold complexes, the level of fluorescence was found to be qualitatively correlated with the electron density at gold. Consequently, the fluorescence brightness of [AuCl( 3 b )] increases when the chloro ligand is replaced by a weakly coordinating anion, whereas upon formation of the electron‐rich complex [Au(SR)( 3 b )] the fluorescence is almost quenched. Related reactions of [AuCl( 3 b )] with [Ag]ONf)] (Nf= nonaflate) and phenyl acetylenes enable the tracking of initial steps in gold‐catalyzed reactions by using fluorescence spectroscopy. Treatment of [AuCl( 3 b )] with [Ag(ONf)] gave the respective [Au(ONf)( 3 b )] only when employing more than 2.5 equivalents of silver salt. The reaction of the “cationic” gold complex with phenyl acetylenes leads to the formation of the respective dinuclear cationic [{( 3 b )Au}₂(CCPh)]⁺ and an increase in the level of fluorescence. The rate of the reaction of [Au(ONf)( 3 b )] with PhCCH depends on the amount of silver salt in the reaction mixture; a large excess of silver salt accelerates this transformation. In situ fluorescence spectroscopy thus provides valuable information on the association of gold complexes with acetylenes.     

G1 dendrimers-mediated evolution of silver nanostructures from nanoparticles to solid spheres

With the control of G1 poly(amidoamine) (PAMAM), an evolutionary course of stable colloidal silver from discrete nanoparticles to solid spheres through ultraviolet irradiation reduction of silver nitrate solutions was observed by transmission electron microscopy (TEM). The morphologies of the products depend on the Ag+ concentration. A mechanism of globular assembly was put forward to interpret the evolution of the nanostructures. Powder X-ray diffraction (XRD), electron diffraction (ED) patterns, and X-ray photoelectron spectroscopy (XPS) indicate the presence of cubic symmetry silver. XPS and Fourier transform infrared (FT-IR) spectroscopy confirm that dendrimers have participated in the stabilization and control of Ag nanostructures. In the UV-vis spectra, the intense surface plasmons are centered at 425 and 430 nm corresponding to the shapes of dots and solid spheres, respectively. The solid spheres exhibit excellent catalytic efficiency on the reduction of 2,7-dicholoroflurescein (DCF).     

Differing Coordination Modes of (O‐Alkyl)‐p‐Ethoxyphenyldithiophosphonato Ligands in Copper(I), Silver(I) and Gold(I) Triphenylphosphine Complexes

The three (O‐methyl)‐p‐ethoxyphenyldithiophosphonato triphenylphosphine complexes of copper, silver and gold, [(Ph₃P)_nM{S₂P(OMe)C₆H₄OEt‐p}] (M = Cu, n = 2; M = Ag, Au, n = 1) investigated structurally by X‐ray diffraction exhibit remarkable structural differences. The copper compound is a four‐coordinate chelate monomer with Cu–S 2.4417(6) and 2.5048(6) Å; P–Cu–S 104.24(2)–114.01(2)°; Cu–S–P 82.49(3)° and 80.85(2)°. The silver compound is a cyclic dimer with bridging dithiophosphonato ligands and three‐coordinate silver atoms [Ag–S 2.5371(5) and 2.6867(5) Å; P–Ag–S 122.88(2)° and 122.17(2)°; Ag–S–P 89.32(2)° and 103.56(2)°]. The gold compound is monomeric with linear dicoordinate gold [Au–S 2.3218(6) Å; P–Au–S 177.72(2)°, Au–S–P 100.97(3)°].     

A novel approach to prepare silver chloride nanoparticles grown on the surface of PAN nanofibre via electrospinning combined with gas–solid reaction

Well-defined silver chloride nanoparticles grown on the surface of PAN nanofibre were synthesized by electrospinning technology combined with gas–solid reaction. This method can avoid the possibility of the waste of raw material as well as enhance the usage rate of AgNO₃. The PAN nanofibre can be recycled easily. X-ray powder diffraction (XRD) shows the presence of crystal AgCl, X-ray photoelectron spectroscopy (XPS) confirm that there are chemical bonds and interaction between the surface modified PAN nanofibre and Ag ions. This will be propitious to prevent nanoparticles from aggregation. Field-emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) gave the direct evidence that AgCl nanoparticles have been dispersed on the surface of PAN nanofibre homogeneously.     

Preparation of Ag Nanowire @ Au Nanoparticle Hybrid Nanowires and their Influence on the Fluorescence Properties of P3HT

In this study, the galvanic displacement reaction between silver and AuCl₄⁻ was carried out to synthesize a series of silver nanowire (Ag NW) @ gold nanoparticle (Au NP) hybrid nanowires. The influence of Ag NW @ Au NP hybrid nanowires on the fluorescence properties of the poly (3‐hexylthiophene) (P3HT) was investigated. The particle sizes of Au NPs on the hybrid nanowires could be adjusted by varying the reaction time and the concentration of the HAuCl₄ solution. Furthermore, steady‐state fluorescence measurements showed that the fluorescence intensity of the P3HT films was higher on various Ag NW @ Au NP hybrid nanowires compared to that on a bare silicon substrate. This was due to the increase in the intensity of electromagnetic field by the localized surface plasmon resonances of Au NPs and surface plasmon polaritons of Ag NWs from the hybrid nanowires. The results were further confirmed by the Raman spectra of the P3HT films on different substrates.     

Gold surface plasmon crystal structure based‐on polystyrene template for biosensor application

In this communication, we assembled ordered polystyrene (PS) microsphere array as a template with the drop‐coating method, and the oxygen plasma was used to etch the template to adjust the spacing between the PS microspheres. Nano‐triangular gold array and silver nano‐pyramid array were obtained by ion beam sputtering to deposit precious metal gold and silver. We observed the surface morphology of Au and Au/Ag composite films by scanning electron microscope and characterized the films by X‐ray diffraction and ultraviolet/visible light spectrophotometer. The results show that the etching time of oxygen plasma has an obvious effect in adjusting the spacing between PSs and has a significant effect on the morphology of Au structure.     

高活性Au/SnO2催化剂的制备及其在1,4-丁二醇氧化制γ-丁内酯反应中的催化应用

采用沉积沉淀法制备了一系列商业SnO₂负载的纳米Au催化剂, 通过电感耦合等离子体发射光谱、X射线粉末衍射、透射电镜和X射线光电子能谱等方法研究了溶液酸碱性、沉淀剂种类、Au负载量和焙烧温度等对催化剂性质的影响.结果表明, Au的负载量以及催化剂的焙烧温度对Au颗粒状态有较大影响.其中, 于573 K焙烧的3%Au/SnO₂催化剂在1,4-丁二醇氧化制备γ-丁内酯反应中的催化活性最好, TOF值是Au/TiO₂催化剂的15倍.这主要是由于SnO₂载体独特的性质对所负载的Au颗粒的影响.     

Preparation and characterization of gold nanoparticles and nanowires loaded into rod-shaped silica by a one-step procedure

Rod-shaped mesoporous silica nanoparticles (RMSN) with built-in gold nanoparticles or thin gold nanowires in the pore channels were in situ synthesized via a one-step procedure. The insertion of a hydrophobic gold precursor into the mesopores of RMSN was reached through a micellar solubilization mechanism and gold nanoparticles were achieved through a thermal reduction. The resulting RMSN and Au-RMSN samples were characterized by using X-ray diffraction, transmission and scanning microscopies (TEM and SEM), X-ray photoelectron spectroscopy (XPS), nitrogen physisorption and solid-state Nuclear Magnetic Resonance (NMR). The interaction of Au precursor (a carbene complex) with the thiol group at the silica surface was identified and found to play a crucial role in the dispersion of the uniform metal nanoparticles at the internal surface of RMSN. Moreover, TEM micrographs revealed the absence of large gold particles outside the mesopore network. The shape of Au nanoparticles and their loading amount in the mesoporous silica could be easily tuned by altering the concentration of gold precursor.     

One‐Step Synthesis of Folic Acid Protected Gold Nanoparticles and Their Receptor‐Mediated Intracellular Uptake

We report here a facile method to obtain folic acid (FA)‐protected gold nanoparticles (Au NPs) by heating an aqueous solution of HAuCl₄/FA in which FA acts as both the reducing and stabilizing agent. The successful formation of FA‐protected Au NPs is demonstrated by UV/Vis spectroscopy, transmission electron microscopy (TEM), selected‐area electron diffraction (SAED), X‐ray photoelectron spectroscopy (XPS), and Fourier transform infrared spectroscopy (FTIR). The intracellular uptake of these nanoparticles is facilitated by HeLa cells overexpressing the folate reporter, which itself is significantly inhibited by free FA in a competitive assay as quantified by inductively coupled plasma mass spectroscopy (ICP‐MS). This simple one‐step approach affords a new perspective for creating functional nanomaterials, and the resulting biocompatible, functional Au NPs may find some prospective applications in various biomedical fields.     

Influence of borohydride concentration on the synthesized Au/graphene nanocomposites for direct borohydride fuel cell

Au/graphene nanocomposites are prepared via a one-pot chemical reduction process at room temperature, using graphene oxide (GO) and chloroauric acid (HAuCl₄) as precursors. The obtained Au/graphene nanocomposites are characterized with scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, thermogravimetric analysis (TGA), Raman spectroscopy and X-ray photoelectron spectroscopy (XPS). TEM shows that the Au nanoparticles with size of approximately 8.7 nm disperse randomly on the surface of graphene. XPS confirms that the Au/graphene nanocomposites show a higher atomic percentage of C/O (6.3/1), in contrast to its precursor GO (2.2/1). Electrochemical studies reveal that the Au/graphene nanocomposites have electrochemically active surface area of 9.82 m² g^?1. Besides, the influence of borohydride concentration on the as-prepared Au/graphene nanocomposites is investigated in details by cyclic voltammetry, chronoamperometry, and chronopotentiometry. The results indicate that high concentration of borohydride can significantly improve the electrochemical performance of the Au/graphene catalyst.     

XPS studies on the gold oxide surface layer formation

The initial stage of gold oxide layer formation on the gold electrode surface was investigated in 0.5 M H₂SO₄. X-ray photoelectron spectroscopy (XPS) spectra of pure gold and the anodically polarized gold electrode surface were compared quantitatively. It was found that gold anodic polarization in the E range from ∼1.3 to 2.1 V causes increase in intensity of the XPS spectra at an electron binding energy ε_b=85.9 eV for gold and at ε_b=530 eV for oxygen. These ε_b values correspond to Au³⁺ and O²⁻ oxidation states in hydrous or anhydrous gold oxide. The larger the amount of the anodically formed surface substance the higher is the intensity of the spectrum at the ε_b values mentioned above. It was concluded that gold anodic oxidation, yielding most likely an Au(III) hydroxide surface layer, takes place in the E range of the anodic current wave beginning at E≈1.3 V. At E_B=1.7 V (the potential of the Burshtein minimum) the stationary surface layer consists of 2.5 to 3 molecular layers of Au(OH)₃. The theoretical amount of charge required for the reduction of one molecular layer of Au(OH)₃ is ∼0.15 mC cm⁻², since the Au(OH)₃ molecule is planar and occupies about four atomic sites on the electrode surface.     

The influence of electron confinement,quantum size effects,and film morphology on the dispersion and the damping of plasmonic modes in Ag and Au thin films

Plasmons are collective longitudinal modes of charge fluctuation in metal samples excited by an external electric field. Surface plasmons (SPs) are waves that propagate along the surface of a conductor. SPs find applications in magneto-optic data storage, optics, microscopy, and catalysis.The investigation of SPs in silver and gold is relevant as these materials are extensively used in plasmonics. The theoretical approach for calculating plasmon modes in noble metals is complicated by the existence of localized d electrons near the Fermi level. Nevertheless, recent calculations based on linear response theory and time-dependent local density approximation adequately describe the dispersion and damping of SPs in noble metals.Furthermore, in thin films the electronic response is influenced by electron quantum confinement. Confined electrons modify the dynamical screening processes at the film/substrate interface by introducing novel properties with potential applications. The presence of quantum well states in the Ag and Au overlayer affects both the dispersion relation of SP frequency and the damping processes of the SP.Recent calculations indicate the emergence of acoustic surface plasmons (ASP) in Ag thin films exhibiting quantum well states. The slope of the dispersion of ASP decreases with film thickness.High-resolution electron energy loss spectroscopy (HREELS) is the main experimental technique for investigating collective electronic excitations, with adequate resolution in both the energy and momentum domains to investigate surface modes.Herein we review on recent progress of research on collective electronic excitations in Ag and Au films deposited on single-crystal substrates.     

钙钛矿型氧化物负载纳米金属催化剂结构的动态调变及其催化氧化CO反应性能

研究了钛酸钡和钛酸钙担载的Ag和Pt纳米催化剂的表面结构随氧化-还原处理过程的动态变化及其对CO完全氧化反应性能的影响.发现氧化物担载的Ag催化剂在氧化处理后其催化活性较还原处理的高; X射线衍射(XRD)和X射线光电子能谱(XPS)表征结果表明,氧化处理能够提高载体表面Ag颗粒的分散度,而还原处理导致Ag颗粒的聚集,从而降低了催化氧化CO反应的活性.氧化-还原处理改变了担载Ag纳米粒子的尺寸并影响其CO氧化反应活性.与此相反,氧化物担载的Pt催化剂在还原处理后所表现出的CO氧化反应活性较氧化处理的高; 对比研究发现,氧化和还原处理后Pt纳米粒子的尺寸基本相同,但是氧化处理的样品中Pt表面物种以氧化态为主,而还原处理后Pt表面物种主要为金属态.Pt纳米粒子表面化学状态随氧化-还原处理的调变是导致表面催化活性差异的主要原因.     

Nanostructured polyamic acid membranes as novel electrode materials

This paper describes a new approach for the preparation of polyamic acid (PAA) composites containing Ag and Au nanoparticles. The composite film of PAA and metal particles were obtained upon electrodeposition of a PAA solution containing gold or silver salts with subsequent thermal treatment, while imidization to polyimide is prevented. The structural characterization of the films is provided by 1H NMR and Fourier transform infrared spectroscopy (FTIR), while the presence of metallic nanoparticles within the polymeric matrix was confirmed by scanning electron microscopy (SEM), cyclic voltammetry (CV), energy-dispersive X-ray analysis (EDX), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). This approach utilizes the unique reactivity of PAA by preventing the cyclization of the reactive soluble intermediate into polyimides at low temperature to design polymer-assisted nanostructured materials. The ability to prevent the cyclization process should enable the design of a new class of electrode materials by use of thermal reduction and/or electrodeposition.     

Cu、Ag、Au掺杂BiVO_4可见光催化剂的制备及性能研究

水热法制备了币族金属(Cu、Ag和Au)掺杂的BiVO4可见光催化剂,借助X-射线衍射(XRD)、X-射线光电子能谱(XPS)、紫外-可见漫反射光谱(DRS)和扫描电子显微镜(SEM)对其进行表征.XRD分析显示所有催化剂都呈现单斜结构.XPS结果显示掺杂元素均以其稳定氧化态形式存在与催化剂表面.DRS谱中掺杂样品的吸收边界比纯BiVO4都有不同程度的红移.以甲基橙的可见光催化降解反应为探针,研究了催化剂的可见光催化性能.结果表明,经币族金属掺杂改性的催化剂催化能力比纯BiVO4有所提高.对其掺杂增强催化能力的可能原因进行了分析讨论.     

First Principles Calculations Toward Understanding SERS of 2,2′-Bipyridyl Adsorbed on Au,Ag, and Au–Ag Nanoalloy

First principles electrodyanmics and quantum chemical simulations are performed to gain insights into the underlying mechanisms of the surface enhanced Raman spectra of 22BPY adsorbed on pure Au and Ag as well as on Au–Ag alloy nanodiscs. Experimental SERS spectra from Au and Ag nanodiscs show similar peaks, whereas those from Au–Ag alloy reveal new spectral features. The physical enhancement factors due to surface nano-texture were considered by numerical FDTD simulations of light intensity distribution for the nano-textured Au, Ag, and Au–Ag alloy and compared with experimental results. For the chemical insights of the enhancement, the DFT calculations with the dispersion interaction were performed using Au₂₀, Ag₂₀, and Au₁₀Ag₁₀ clusters of a pyramidal structure for SERS modeling. Binding of 22BPY to the clusters was simulated by considering possible arrangements of vertex and planar physical as well as chemical adsorption models. The DFT results indicate that 22BPY prefers a coplanar adsorption on a (111) face with trans-conformation having close energy difference to cis-conformation. Binding to pure Au cluster is stronger than to pure Ag or Au–Ag alloy clusters and adsorption onto the alloy surface can deform the surface. The computed Raman spectra are compared with experimental data and assignments for pure Au and Ag models are well matching, indicating the need of dispersion interaction to reproduce strong Raman signal at around 800 cm^–1. This work provides insight into 3D character of SERS on nanorough surfaces due to different binding energies and bond length of nanoalloys. © 2018 Wiley Periodicals, Inc.     

Silver embedded C-TiO2 exhibits improved photocatalytic properties with potential application in waste water treatment

Non-metal element doping on photocatalysts demonstrates a wide range of disadvantages. Hence metal embedding on nanomaterials is considered to enhance photocatalytic efficiency. In this study, we employed silver nano particle embedding on C-TiO₂ photocatalyst to improve its phtotocatytic degradation efficiency of organic water pollutant such as methyl orange. Modified sol-gel methods based on self-assembly technique was used to prepare the nanoformulations. The synthesized nanoparticles were characterized by X-Ray diffraction (XRD), Fourier transforms infrared (FT-IR), Scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), UV–vis diffuse reflectance spectroscopy, and photoluminescence spectra (PL). Compared to non-silver formulation (C-TiO₂), silver embedded nanomaterial (C-TiO₂/Ag) displayed an increased shift in the light absorption towards visible spectrum. A low photoluminescence (PL) intensity by 1 wt% C-TiO₂/Ag indicated improved photocatalytic efficiency. Further, higher degradation of organic dye methyl orange confirmed that 1 wt% C-TiO₂/Ag exhibited the best photodegradation rate over its non Ag embedded C-TiO₂. Embedding of silver on C-TiO₂ extends optical absorption edge of C-TiO₂ to more visible spectrum and inhibits electron-hole recombination resulting in enhanced photocatalytic activity. Photocatalytic degradation on methyl orange organic pollutant was considerably improved indicating its potential use in water treatment applications.