Oligomerization and regioselective hydrosilylation of styrenes catalyzed by cationic allyl nickel complexes bearing allylphosphine ligands

The complexes [Ni(eta(3)-CH(2)CHCH(2))Br(kappa(1)P-PR(2)CH(2)CH=CH(2))] (R = Ph 1, (i)Pr2 ) and [Ni(eta(3)-CH(2)C(R')CH(2))(kappa(1)P-PR(2)CH(2)CH=CH(2))(2)][BAr'(4)] (R' = H, R = Ph 4a, R = (i)Pr 4b; R' = CH(3), R = Ph 5a, R = (i)Pr 5b; Ar' = 3,5-C(6)H(3)(CF(3))(2)) have been prepared and characterized. The X-ray crystal structures of 1, 2 and 5b have been determined. 4a-b and 5a-b are catalyst precursors for the oligomerization of RC(6)H(4)CH=CH(2) to oligostyrene (R = H) or oligo(4-methylstyrene) (R = CH(3)) respectively, without the need of a co-catalyst such as methylalumoxane. The catalytic activities range from moderate to high. The oligomerization reactions are carried out in the temperature interval 25-40 degrees C in 1,2-dichloroethane, using an olefin/catalyst ratio equal to 200, yielding oligostyrenes with a high isotactic fraction content P(m), with M(n) in the range 700-1900 Dalton, and polydispersities between 1.22 and 1.64. The cationic complexes 4a-b and 5a-b are also effective catalyst precursors for the hydrosilylation reactions of styrene or 4-methylstyrene with PhSiH(3) in 1,2-dichloroethane at 40 degrees C using an olefin/catalyst ratio equal to 100, leading selectively to RC(6)H(4)CH(SiH(2)Ph)CH(3) (R = H, CH(3)) in 50-79% yield.     

Asymmetric inter- and intramolecular cyclopropanation of alkenes catalyzed by chiral ruthenium porphyrins. Synthesis and crystal structure of a chiral metalloporphyrin carbene complex.

Extensive investigations of asymmetric intermolecular cyclopropanation of terminal alkenes with diazoacetates catalyzed by ruthenium porphyrin [Ru(P*)(CO)(EtOH)] (1, H2P = 5,10,15,20-tetrakis[(1S,4R,5R,8S)-1,2,3,4,5,6,7,8-octahydro-1,4:5,8-dimethanoanthracene-9-yl]porphyrin) and the application of catalyst 1 to asymmetric intramolecular cyclopropanation of allylic or homoallylic diazoacetates are described. The intermolecular cyclopropanation of styrene and its derivatives with ethyl diazoacetate afforded the corresponding cyclopropyl esters in up to 98% ee with high trans/cis ratios of up to 36 and extremely high catalyst turnovers of up to 1.1 x 10(4). Examination of the effects of temperature, diazoacetate, solvent, and substituent in the intermolecular cyclopropanation reveals that (i) both enantioselectivity and trans selectivity increase with decreasing temperature, (ii) sterically encumbered diazoacetates N2CHCO2R, such as R = Bu(t), and donor solvents, such as diethyl ether and tetrahydrofuran, are beneficial to the trans selectivity, and (iii) electron-donating para substituents on styrene accelerate the cyclopropanations, with the log(k(X)/k(H)) vs sigma(+) plot for para-substituted styrenes p-X-C6H4CH=CH2 (X = MeO, Me, Cl, CF3) exhibiting good linearity with a small negative rho(+) value of -0.44 +/- 0.09. In the case of intramolecular cyclopropanation, complex 1 promoted the decomposition of a series of allylic diazoacetates to form the cyclopropyl lactones in up to 85% ee, contributing the first efficient metalloporphyrin catalyst for an asymmetric intramolecular cyclopropanation. Both the inter- and intramolecular cyclopropanations were proposed to proceed via a reactive chiral ruthenium carbene intermediate. The enantioselectivities in these processes were rationalized on the basis of the X-ray crystal structures of closely related stable chiral carbene complexes [Ru(P*)(CPh2)] (2) and [Ru(P*)(C(Ph)CO2CH2CH=CH2)] (3) obtained from reactions of complex 1 with N2CPh2 and N2C(Ph)CO2CH2CH=CH2, respectively.     

硝基环氧化合物的单体结构对其聚合活性和聚合物性能的影响

研究了一些环氧化合物:[R=H(Ⅰ),NO_2(Ⅱ),NO_3(Ⅲ),OCH_2CH_2NO_2(Ⅳ),OCH_2CH_2NO_3(Ⅴ)]的单体结构对其阳离子开环聚合活性及其聚合物性能的影响。在催化系统下,其聚合活性大小有如下顺序:(Ⅰ)>(Ⅳ)≥(Ⅴ)>(Ⅲ)>(Ⅱ)。着重研究了上述硝基环氧化合物与四氢呋喃的共聚物的热稳定性、化学稳定性、玻璃化温度以及其胶片的力学性能。     

Synthesis of Al complexes containing phenoxy-imine ligands and their use as the catalyst precursors for efficient living ring-opening polymerisation of epsilon-caprolactone

Al complexes containing phenoxy-imine ligands of type, Me2Al[O-2-R1-6-(R2N=CH)C6H3] [R1 = Me, R2 = 2,6-iPr2C6H3 (1a), tBu (1b); R1 = tBu, R2 = 2,6-iPr2C6H3 (2a), tBu (2b), cyclohexyl (2c), adamantyl (2d), C6H5 (2e), 2,6-Me2C6H3 (2f), C6F5 (2g)] have been prepared in high yields from AlMe3 by treating with 1.0 equiv. of 2-R1-6-(R2N=CH)C6H3OH in n-hexane. Structures for 1a, 1b, 2a-e and 2g were determined by X-ray crystallography, and these complexes have a distorted tetrahedral geometry around Al; both the Al-O and the Al-N bond distances were influenced by substituents in both the aryloxo and the imino groups. Me2Al[mu2-O-2-(R2N=CH)C6H4](AlMe3) [R2 = 2,6-iPr2C6H3 (3a), tBu (3b)] were prepared exclusively by reaction of AlMe3 with 2-(R2N=CH)C6H4OH, and these complexes form a distorted tetrahedral geometry around each Al centre with additional AlMe3 coordinating to the oxygen in the phenoxy-imine ligand. Complexes 1a, 1b and 2a-g were tested as catalyst precursors for ring-opening polymerisation (ROP) of epsilon-caprolactone (CL) in the presence of (n)BuOH (1.0 equiv. to Al), and their catalytic activities were strongly influenced by the imino substituent (R2). The efficient ROP has been achieved using the C6F5 analogue (2g), with the ROP taking place in a living manner.     

Homogeneous catalysts supported on soluble polymers: biphasic Sonogashira coupling of aryl halides and acetylenes using MeOPEG-bound phosphine-palladium catalysts for efficient catalyst recycling

The Sonogashira coupling of various aryl bromides and iodides with different acetylenes was studied under biphasic conditions with soluble, polymer-modified catalysts to allow the efficient recycling of the homogeneous catalyst. For this purpose, several sterically demanding and electron-rich phosphines of the type R(P)PR(2) were synthesised. They are covalently linked to a monomethyl polyethylene glycol ether with a mass of 2000 Dalton (R(P)=MeOPEG(2000)) R(P)PR(2): -PR(2)= -CH(2)C(6)H(4)CH(2)P(1-Ad)(2), -C(6)H(4)-P(1-Ad)(2), -C(6)H(4)-PPh(2). To couple aryl iodides and acetylenes, the catalyst [(MeCN)(2)PdCl(2)]/2 R(P)-C(6)H(4)-PPh(2) was used in CH(3)CN/Et(3)N/n-heptane (5/2/5). The combined yields of coupling product over five reaction cycles are between 80-95 percent. There is no apparent leaching of the catalyst into n-heptane, as evidenced by (1)H NMR spectroscopy. The new catalyst [(MeCN)(2)PdCl(2)]/2 (1-Ad)(2)PBn can be used for room-temperature coupling of various aryl bromides and acetylenes in THF with HNiPr(2) as a base. A closely related catalyst Na(2)[PdCl(4)]/2 R(P)-CH(2)C(6)H(4)CH(2)P(1-Ad)(2) linked to the polymer was used to couple aryl bromides and acetylenes in DMSO or DMSO/n-heptane at 60 degrees C with 0.5 mol percent Na(2)[PdCl(4)], 1 mol percent R(P)PR(2) and 0.33 mol percent CuI. The combined yield of coupling products over five cycles is always greater than 90 percent, except for sterically hindered aryl bromides. The determination of the turnover frequency (TOF) of the catalyst indicates only a small decrease in activity over five cycles. Leaching of the catalyst into the product containing n-heptane solution could not be detected by means of (1)H NMR and TXRF; this is indicative of >99.995 percent catalyst retention in the DMSO solvent.     

Organolathanide-catalyzed regioselective intermolecular hydroamination of alkenes, alkynes, vinylarenes, di- and trivinylarenes, and methylenecyclopropanes. Scope and mechanistic comparison to intramolecular cyclohydroaminations

Organolanthanide complexes of the type Cp'(2)LnCH(SiMe(3))(2) (Cp' = eta(5)-Me(5)C(5); Ln = La, Nd, Sm, Lu) and Me(2)SiCp' '(2)LnCH(SiMe(3))(2) (Cp' ' = eta(5)-Me(4)C(5); Ln = Nd, Sm, Lu) serve as efficient precatalysts for the regioselective intermolecular hydroamination of alkynes R'Ctbd1;CMe (R' = SiMe(3), C(6)H(5), Me), alkenes RCH=CH(2) (R = SiMe(3), CH(3)CH(2)CH(2)), butadiene, vinylarenes ArCH=CH(2) (Ar = phenyl, 4-methylbenzene, naphthyl, 4-fluorobenzene, 4-(trifluoromethyl)benzene, 4-methoxybenzene, 4-(dimethylamino)benzene, 4-(methylthio)benzene), di- and trivinylarenes, and methylenecyclopropanes with primary amines R' 'NH(2) (R' ' = n-propyl, n-butyl, isobutyl, phenyl, 4-methylphenyl, 4-(dimethylamino)phenyl) to yield the corresponding amines and imines. For R = SiMe(3), R = CH(2)=CH lanthanide-mediated intermolecular hydroamination regioselectively generates the anti-Markovnikov addition products (Me(3)SiCH(2)CH(2)NHR' ', (E)-CH(3)CH=CHCH(2)NHR' '). However, for R = CH(3)CH(2)CH(2), the Markovnikov addition product is observed (CH(3)CH(2)CH(2)CHNHR' 'CH(3)). For internal alkynes, it appears that these regioselective transformations occur under significant stereoelectronic control, and for R' = SiMe(3), rearrangement of the product enamines occurs via tautomerization to imines, followed by a 1,3-trimethylsilyl group shift to stable N-SiMe(3)-bonded CH(2)=CMeN(SiMe(3))R' ' structures. For vinylarenes, intermolecular hydroamination with n-propylamine affords the anti-Markovnikov addition product beta-phenylethylamine. In addition, hydroamination of divinylarenes provides a concise synthesis of tetrahydroisoquinoline structures via coupled intermolecular hydroamination/subsequent intramolecular cyclohydroamination sequences. Intermolecular hydroamination of methylenecyclopropane proceeds via highly regioselective exo-methylene C=C insertion into Ln-N bonds, followed by regioselective cyclopropane ring opening to afford the corresponding imine. For the Me(2)SiCp' '(2)Nd-catalyzed reaction of Me(3)SiCtbd1;CMe and H(2)NCH(2)CH(2)CH(2)CH(3), DeltaH() = 17.2 (1.1) kcal mol(-)(1) and DeltaS() = -25.9 (9.7) eu, while the reaction kinetics are zero-order in [amine] and first-order in both [catalyst] and [alkyne]. For the same substrate pair, catalytic turnover frequencies under identical conditions decrease in the order Me(2)SiCp' '(2)NdCH(SiMe(3))(2) > Me(2)SiCp' '(2)SmCH(SiMe(3))(2) > Me(2)SiCp' '(2)LuCH(SiMe(3))(2) > Cp'(2)SmCH(SiMe(3))(2), in accord with documented steric requirements for the insertion of olefinic functionalities into lanthanide-alkyl and -heteroatom sigma-bonds. Kinetic and mechanistic evidence argues that the turnover-limiting step is intermolecular C=C/Ctbd1;C bond insertion into the Ln-N bond followed by rapid protonolysis of the resulting Ln-C bond.     

Glycine- and sarcosine-based models of vanadate-dependent haloperoxidases in sulfoxygenation reactions

Reaction of R-styreneoxide with glycine-tert-butylester yielded amino alcohols of the general formula NR1R2R3, where R1 = CH2COOtBu and R2 = R3 = 2-phenyl-2-hydroxyethyl (H2LA); R2 = 2-phenyl-2-hydroxyethyl and R3 = 1-phenyl-2-hydroxyethyl (H2LB); R2 = H and R3 = 2-phenyl-2-hydroxyethyl (HLC); and R2 = H and R3 = 1-phenyl-2-hydroxyethyl (HLD). The corresponding reaction with sarcosine-tert-butylester and subsequent hydrolysis provided the zwitterion +NH(CH3){CH2CHPh(OH)}(CH2CO2-), HLE* (asterisk refers to unprotected carboxylate). Reaction of these ligands with VO(OiPr)3 in CH2Cl2 gave the oxovanadium(V) complexes [VOL(OiPr)2] and [VOL2(OiPr)] (for LC and LD) or, when reacted in the presence of MeOH, [VOL'(OMe)], where L' represents the methyl ester of LA, LB, and LE. The crystal and molecular structures of R-HLC, S-HLD, R,S-HLE* x H2O, and lambda-[VO(R,S-LB')OMe] have been determined. The complex [VOLB'(OMe)] contains vanadium in a distorted trigonal-bipyramidal array (tau = 0.72), the oxo group in the equatorial plane, and methoxide and N in the apical positions, and thus, it structurally models the active center of vanadate-dependent haloperoxidases. The structure and the bonding parameters, including a particularly long d(V-N) of 2.562 A, are backed up by DFT calculations. The isolated oxovanadium(V) complexes and the in situ systems L + VO(OiPr)3 catalyze the oxidation, by cumylhydroperoxide HO2R', of prochiral sulfides (MeSPh, MeSp-Tol, PhSBn) to chiral sulfoxides plus some sulfone. The best results with respect to enantioselectivity (enantiomeric excess (ee) = 38%) were obtained with the system VO(OiPr)3/LA, and the best selectivity with respect to sulfoxide (100%) was obtained with [VOLA(OiPr)]. The reaction with the hexacoordinated [VO(OMe)(HOMe)LD*] was very slow. Oxidation of PhSBn is faster than that of MeSPh and MeSpTol. Turn-over numbers are up to 60 mol of sulfoxide mol-1 of catalyst h-1 (-20 degrees C). The unspectacular ee apparently is a consequence of flexibility of the active catalyst in solution, as shown by the 51V NMR of the catalysts [VOL(OR)] and the oxo-peroxo intermediates [VOL(O2R')]. As shown by DFT calculations, the peroxo ligand coordinates in the tilted end-on fashion in the axial or equatorial position (energy difference = 17.6 kJ/mol).     

Remarkably stable iron porphyrins bearing nonheteroatom-stabilized carbene or (alkoxycarbonyl)carbenes: isolation,X-ray crystal structures,and carbon atom transfer reactions with hydrocarbons

Reactions of [Fe(TPFPP)] (TPFPP = meso-tetrakis(pentafluorophenyl)porphyrinato dianion) with diazo compounds N(2)C(Ph)R (R = Ph, CO(2)Et, CO(2)CH(2)CH=CH(2)) afforded [Fe(TPFPP)(C(Ph)R)] (R = Ph (1), CO(2)Et (2), CO(2)CH(2)CH=CH(2) (3)) in 65-70% yields. Treatment of 1 with N-methylimidazole (MeIm) gave the adduct [Fe(TPFPP)(CPh(2))(MeIm)] (4) in 65% yield. These new iron porphyrin carbene complexes were characterized by NMR and UV-vis spectroscopy, mass spectrometry, and elemental analyses. X-ray crystal structure determinations of 1.0.5C(6)H(6).0.5CH(2)Cl(2) and 4 reveal Fe=CPh(2) bond lengths of 1.767(3) (1) and 1.827(5) A (4), together with large ruffling distortions of the TPFPP macrocycle. Complexes 2 and 4 are reactive toward styrene, affording the corresponding cyclopropanes in 82 and 53% yields, respectively. Complex 1 is an active catalyst for both intermolecular cyclopropanation of styrenes with ethyl diazoacetate and intramolecular cyclopropanation of allylic diazoacetates. Reactions of 2 and 4 with cyclohexene or cumene produced allylic or benzylic C-H insertion products in up to 83% yield.     

Enols of amides. The effect of fluorine substituents in the ester groups of dicarboalkoxyanilidomethanes on the enol/amide and E-enol/Z-enol ratios. A multinuclei NMR study.

Condensation of phenyl isocyanate substituted by 4-MeO, 4-Me, 4-H, 4-Br, and 2,4-(MeO)(2) with esters CH(2)(CO(2)R)CO(2)R', R = CH(2)CF(3), R' = CH(3), CH(2)CF(3), CH(CF(3))(2), or R = CH(3), R' = CH(CF(3))(2) gave 17 "amides" ArNHCOCH(CO(2)R)CO(2)R' containing three, six, or nine fluorines in the ester groups. X-ray crystallography of six of them revealed that compounds with > or =6 fluorine atoms exist in the solid state as the enols of amides ArNHC(OH)=C(CO(2)R)CO(2)R' whereas the ester with R = R' = CH(3) was shown previously to have the amide structure. In the solid enols, the OH is cis and hydrogen bonded to the better electron-donating (i.e., with fewer fluorine atoms) ester group. X-ray diffraction could not be obtained for compounds with only three fluorine atoms, i.e., R = CH(2)CF(3), R' = CH(3) but the (13)C CP-MAS spectra indicate that they have the amide structure in the solid state, whereas esters with six and nine fluorine atoms display spectra assigned to the enols. The solid enols show unsymmetrical hydrogen bonds and the expected features of push-pull alkenes, e.g., long C(alpha)=C(beta) bonds. The structure in solution depends on the number of fluorine atoms and the solvent, but only slightly on the substituents. The symmetrical systems (R = R' = CH(2)CF(3)) show signals for the amide and the enol, but all systems with R not equal R' displayed signals for the amide and for two enols, presumably the E- and Z-isomers. The [Enol I]/[Enol II] ratio is 1.6-2.9 when R = CH(2)CF(3), R' = CH(3), CH(CF(3))(2) and 4.5-5.3 when R = CH(3), R' = CH(CF(3))(2). The most abundant enol display a lower field delta(OH) and a higher field delta(NH) and assigned the E-structure with a stronger O-H.O=C(OR) hydrogen bond than in the Z-isomer. delta(OH) and delta(NH) values are nearly the same for all systems with the same cis CO(2)R group. The [Enols]/[Amide] ratio in various solvents follows the order CCl(4) > CDCl(3) > CD(3)CN > DMSO-d(6). The enols always predominate in CCl(4) and the amide is the exclusive isomer in DMSO-d(6) and the major one in CD(3)CN. In CDCl(3) the major tautomer depends on the number of fluorines. For example, in CDCl(3,) for Ar = Ph, the % enol (K(Enol)) is 35% (0.54) for R = CH(2)CF(3,) R' = CH(3), 87% (6.7) for R = R' = CH(2)CF(3), 79% (3.8) for R = CH(3), R' = CH(CF(3))(2) and 100% (> or =50) for R = CH(2)CF(3), R' = CH(CF(3))(2). (17)O and (15)N NMR spectra measured for nine of the enols are consistent with the suggested assignments. The data indicate the importance of electron withdrawal at C(beta), of intramolecular hydrogen bonding, and of low polarity solvents in stabilizing the enols. The enols of amides should no longer be regarded as esoteric species.     

An investigation into the allylic imidate rearrangement of trichloroacetimidates catalysed by cobalt oxazoline palladacycles

Dimeric palladacycles, di-mu-X-bis[{eta(5)-(S)-((p)R)-2-[2'-(4'-methylethyl)oxazolinyl]cyclopentadienyl,1-C,3'-N}(eta(4)-tetraphenylcyclobutadiene)cobalt]dipalladium (COP-X), containing bridging groups X=OAc, Cl, Br, I, O(2)CCF(3), p-O(2)CC(6)H(4)F, were synthesised and compared as catalysts for the asymmetric allylic imidate rearrangement of (E)-Cl(3)CC(=NH)OCH(2)CH=CHR with R=nPr. The enantiomeric excess of the product (S)-Cl(3)CC(=O)NHCHRCH=CH(2) was essentially invariant of X (93-96%) and the yield increased in the sequence I相似文献   

Reaction of primary aromatic amines with alkyl carbonates over NaY faujasite: a convenient and selective access to mono-N-alkyl anilines.

At atmospheric pressure and at 130-160 degrees C, primary aromatic amines (p-XC6H4NH2, X = H, Cl, NO2) are mono-N-alkylated in a single step, with symmetrical and asymmetrical dialkyl carbonates [ROCOOR', R = Me, R' = MeO(CH2)2O(CH2)2; R = R' = Et; R = R' = benzyl; R = R' = allyl; R = Et, R' = MeO(CH2)2O(CH2)2], in the presence of a commercially available NaY faujasite. No solvents are required. Mono-N-alkyl anilines are obtained with a very high selectivity (90-97%), in good to excellent yields (68-94%), on a preparative scale. In the presence of triglyme as a solvent, the mono-N-alkyl selectivity is independent of concentration and polarity factors. The reaction probably takes place within the polar zeolite cavities, and through the combined effect of the dual acid-base properties of the catalyst.     

一种新型阳离子三硅氧烷表面活性剂的合成及其表面性能

以1,2-环氧-9癸烯(ED)和1,1,1,3,5,5,5-七甲基三硅氧烷(MDHM)为原料,在氯铂酸催化下,经硅氢加成反应先制得烷基环氧基三硅氧烷(AETS),再将AETS与二乙醇胺(DEA)进行开环反应合成了一种新型阳离子三硅氧烷表面活性剂(CTSS)。 通过IR和1H NMR对CTSS的结构进行了表征,测定了CTSS的表面张力、润湿性和对pH值的稳定性。 同时对AETS及CTSS的合成条件进行了优化,优化后的工艺条件为:合成AETS的最佳条件为n(ED)∶n(MDHM)(n为物质的量)为1.1∶1,催化剂用量为n(MDHM)的0.075%,反应时间为5 h,反应温度为80 ℃;合成CTSS的最佳条件为n(AETS)∶n(DEA)=1∶1.05,反应时间3 h,反应温度80 ℃。 性能测试结果表明,CTSS在临界胶束浓度(CMC)为1.3×10-3 mol/L时,可以将水的表面张力降低至20.0 mN/m,同时具有良好的润湿性,另外,CTSS在pH值为6.5~8.0时稳定存在。     

Effect of ligand substituents in olefin polymerisation by half-sandwich titanium complexes containing monoanionic iminoimidazolidide ligands-MAO catalyst systems

Various half-sandwich titanium complexes containing iminoimidazolidide ligands, CpTiCl(2)[1,3-R(2)(CH(2)N)(2)C=N] (1a-d) [R = Ph (a), 2,6-Me(2)C(6)H(3) (b), cyclohexyl (c), (t)Bu (d)], have been employed as the catalyst precursors for ethylene polymerisation, syndiospecific styrene polymerisation, and copolymerisation of ethylene with 1-hexene in the presence of MAO cocatalyst; 1d showed the highest catalytic activity for ethylene polymerisation whereas 1b showed the highest activity for syndiospecific styrene polymerisation.     

Half-sandwich rhodium (and iridium) complexes as enantioselective catalysts for the 1,3-dipolar cycloaddition of 3,4-dihydroisoquinoline N-oxide to methacrylonitrile

Cationic half-sandwich complexes containing the [(eta(5)-C(5)Me(5))M(Diphos*)] moiety (M=Rh, Ir; Diphos*=chiral diphosphine ligand) catalyze the cycloaddition of the nitrone 3,4-dihydroisoquinoline N-oxide (A) to methacrylonitrile (B) with excellent regio and endo selectivity and low-to-moderate enantioselectivity. The most active and selective catalyst, (S(Rh),R(C))-[(eta(5)-C(5)Me(5))Rh{(R)-Prophos)} (NC(Me)C==CH(2))](SbF(6))(2), has been isolated and fully characterized including the determination of the molecular structure by X-ray diffraction. The R-at-metal epimers of the complexes [(eta(5)-C(5)Me(5))M{(R)-Prophos)}(NC(Me)C==CH(2))](SbF(6))(2) (M=Rh, Ir) isomerize to the corresponding S-at-metal diastereomers. The stoichiometric cycloaddition of A with B is catalyzed by diastereopure (S(M),R(C))-[(eta(5)-C(5)Me(5))M{(R)-Prophos)}(NC(Me)C==CH(2))](SbF(6))(2) with perfect regio and endo selectivity and very good (up to 95 %) ee. The catalyst can be recycled up to nine times without significant loss of either activity or selectivity.     

Fluorous phase-transfer activation of catalysts: application of a new rate-enhancement strategy to alkene metathesis

Reactions of the bis(pyridine) complex (H2IMes)(Py)2(Cl)2Ru(=CHPh) and fluorous phosphines P(CH2CH2R(fn))3 (n = a, 6; b, 8; c, 10; R(fn) = (CF2)(n-1)CF3) give (H2IMes)(P(CH2CH2R(fn))3)(Cl)2Ru(=CHPh) (2a-c, 64-73%), which are analogs of Grubbs' second generation catalyst and effective alkene metathesis catalysts under organic monophasic and fluorous/organic biphasic conditions. The latter give rate accelerations, which are believed to arise from phase transfer of the dissociated fluorous phosphine.     

Theoretical study of H-abstraction reactions from CH3Cl and CH3Br molecules by ClO and BrO radicals

The rate constants of the H-abstraction reactions from CH(3)Cl and CH(3)Br molecules by ClO and BrO radicals have been estimated over the temperature range of 300-2500 K using four different levels of theory. Calculations of optimized geometrical parameters and vibrational frequencies are performed using B3LYP and MP2 methods combined with the cc-pVTZ basis set. Single-point energy calculations have been carried out with the highly correlated ab initio coupled cluster method in the space of single, double, and triple (perturbatively) electron excitations CCSD(T) using the cc-pVTZ and cc-pVQZ basis sets. Canonical transition-state theory combined with an Eckart tunneling correction has been used to predict the rate constants as a function of temperature. In order to choose the appropriate levels of theory with chlorine- and bromine-containing species, the reference reaction Cl ((2)P(3/2)) + CH(3)Cl → HCl + CH(2)Cl (R(ref)) was first theoretically studied because its kinetic parameters are well-established from numerous experiments, evaluation data, and theoretical studies. The kinetic parameters of the reaction R(ref) have been determined accurately using the CCSD(T)/cc-pVQZ//MP2/cc-pVTZ level of theory. This level of theory has been used for the rate constant estimation of the reactions ClO + CH(3)Cl (R(1)), ClO + CH(3)Br (R(2)), BrO + CH(3)Cl (R(3)), and BrO + CH(3)Br (R(4)). Six-parameter Arrhenius expressions have been obtained by fitting to the computed rate constants of these four reactions (including cis and trans pathways) over the temperature range of 300-2500 K.     

Branching ratios for the reaction of selected carbonyl-containing peroxy radicals with hydroperoxy radicals

An important chemical sink for organic peroxy radicals (RO(2)) in the troposphere is reaction with hydroperoxy radicals (HO(2)). Although this reaction is typically assumed to form hydroperoxides as the major products (R1a), acetyl peroxy radicals and acetonyl peroxy radicals have been shown to undergo other reactions (R1b) and (R1c) with substantial branching ratios: RO(2) + HO(2) → ROOH + O(2) (R1a), RO(2) + HO(2) → ROH + O(3) (R1b), RO(2) + HO(2) → RO + OH + O(2) (R1c). Theoretical work suggests that reactions (R1b) and (R1c) may be a general feature of acyl peroxy and α-carbonyl peroxy radicals. In this work, branching ratios for R1a-R1c were derived for six carbonyl-containing peroxy radicals: C(2)H(5)C(O)O(2), C(3)H(7)C(O)O(2), CH(3)C(O)CH(2)O(2), CH(3)C(O)CH(O(2))CH(3), CH(2)ClCH(O(2))C(O)CH(3), and CH(2)ClC(CH(3))(O(2))CHO. Branching ratios for reactions of Cl-atoms with butanal, butanone, methacrolein, and methyl vinyl ketone were also measured as a part of this work. Product yields were determined using a combination of long path Fourier transform infrared spectroscopy, high performance liquid chromatography with fluorescence detection, gas chromatography with flame ionization detection, and gas chromatography-mass spectrometry. The following branching ratios were determined: C(2)H(5)C(O)O(2), Y(R1a) = 0.35 ± 0.1, Y(R1b) = 0.25 ± 0.1, and Y(R1c) = 0.4 ± 0.1; C(3)H(7)C(O)O(2), Y(R1a) = 0.24 ± 0.15, Y(R1b) = 0.29 ± 0.1, and Y(R1c) = 0.47 ± 0.15; CH(3)C(O)CH(2)O(2), Y(R1a) = 0.75 ± 0.13, Y(R1b) = 0, and Y(R1c) = 0.25 ± 0.13; CH(3)C(O)CH(O(2))CH(3), Y(R1a) = 0.42 ± 0.1, Y(R1b) = 0, and Y(R1c) = 0.58 ± 0.1; CH(2)ClC(CH(3))(O(2))CHO, Y(R1a) = 0.2 ± 0.2, Y(R1b) = 0, and Y(R1c) = 0.8 ± 0.2; and CH(2)ClCH(O(2))C(O)CH(3), Y(R1a) = 0.2 ± 0.1, Y(R1b) = 0, and Y(R1c) = 0.8 ± 0.2. The results give insights into possible mechanisms for cycling of OH radicals in the atmosphere.     

Electrocatalytic oxidation of formate by [Ni(P(R)2N(R')2)2(CH3CN)]2+ complexes

[Ni(P(R)(2)N(R')(2))(2)(CH(3)CN)](2+) complexes with R = Ph, R' = 4-MeOPh or R = Cy, R' = Ph , and a mixed-ligand [Ni(P(R)(2)N(R')(2))(P(R'(2))N(R'(2)))(CH(3)CN)](2+) with R = Cy, R' = Ph, R' = Ph, have been synthesized and characterized by single-crystal X-ray crystallography. These and previously reported complexes are shown to be electrocatalysts for the oxidation of formate in solution to produce CO(2), protons, and electrons, with rates that are first-order in catalyst and formate at formate concentrations below ～0.04 M (34 equiv). At concentrations above ～0.06 M formate (52 equiv), catalytic rates become nearly independent of formate concentration. For the catalysts studied, maximum observed turnover frequencies vary from <1.1 to 15.8 s(-1) at room temperature, which are the highest rates yet reported for formate oxidation by homogeneous catalysts. These catalysts are the only base-metal electrocatalysts as well as the only homogeneous electrocatalysts reported to date for the oxidation of formate. An acetate complex demonstrating an η(1)-OC(O)CH(3) binding mode to nickel has also been synthesized and characterized by single-crystal X-ray crystallography. Based on this structure and the electrochemical and spectroscopic data, a mechanistic scheme for electrocatalytic formate oxidation is proposed which involves formate binding followed by a rate-limiting proton and two-electron transfer step accompanied by CO(2) liberation. The pendant amines have been demonstrated to be essential for electrocatalysis, as no activity toward formate oxidation was observed for the similar [Ni(depe)(2)](2+) (depe = 1,2-bis(diethylphosphino)ethane) complex.     

Claisen rearrangement of aliphatic allyl vinyl ethers in the presence of copper(II) bisoxazoline

The Claisen rearrangement of 1-methyl-2-isopropyoxycarbonyl-6-propyl allyl vinyl ether catalyzed by copper(II) bisoxazoline (Cu-box) has been investigated using density functional theory. Both the phenyl- and tert-butyl-substituted Cu-box systems have been studied. Three different reaction media (vacuum, CH2Cl2, CH3CN) have been considered. In vacuum, the phenyl Cu-box catalyzed reaction yields a (1R,6R) configured major product with a low selectivity. The solvent induces a higher selectivity and a reversal of the absolute configuration (1S,6S). However, the tert-butyl Cu-box catalyzed reaction yields (1R,6R) as the major product both in the gas phase and in the solvent with a good selectivity. Although chair-like TSs are lower in energy than boat-like TSs, the energy difference is small. This is because in the presence of the catalyst the distance between the allyl and vinyl parts of the substrate is relatively large, and thus the steric repulsion between them is smaller than would normally be expected for boat-like structures. The enantioselectivity of tert-butyl Cu-box originates from the steric interactions between the substrate and the catalyst, which are less important for the phenyl Cu-box where the enantioselectivity is determined by the solvent effects.     

含有烯丙基亚胺酚配体的ⅣB族烯烃聚合催化剂以及制备双峰分布聚乙烯(英)

选择含有烯丙基亚胺酚为辅助配体，设计合成了5个ⅣB族钛锆金属络合物[{CH₂=CHCH₂N=CH-C₆H₃(3-R)O}₂MCl₂](4a：R=t-Bu，M=Zr；4b：R=t-Bu，M=Ti；4c：R=Ph，M=Zr；4d：R=Ph，M=Ti)和[{(CH₃)₂CHCH₂N=CH-C₆H₃(3-t-Bu)O}₂ZrCl₂] (5)，对它们进行了红外光谱、核磁共振及元素分析表征。并用X-射线单晶衍射法测定了化合物4a和4d的晶体结构。部分配合物在助催化剂MMAO的作用下对烯烃聚合显示了较好的催化活性，其中自固载催化剂4a生成了双峰分布的聚烯烃产品 (M_w/M_n=15.3～31.9)。