Nanofibers prepared by electrospinning from solutions of biobased polyamide 4

A successful preparation of polyamide 4 nanofibers via electrostatic spinning with diameters close to 100 nm is described. Polyamide 4 was prepared by the anionic ring‐opening polymerization of 2‐pyrrolidone and characterized. The effect of the system parameters (i.e., molar mass of the polymer, the solvent system) and the process parameters (i.e., the electrode‐to‐collector distance) during the electrostatic spinning have been studied. The morphology of the polyamide 4 fiber layers is given except molar mass of the polymer and the concentration of its solution primarily by the conformation of polyamide chains due to polyelectrolyte effect which was confirmed by viscosity measurements. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2203–2210     

Nonstoichiometric polyelectrolyte complex of carboxymethylcellulose and N‐methylated poly(2‐vinylpyridine): Formation of a gel‐like structure

The formation of polyelectrolyte complexes between carboxymethylcellulose and N‐methylated poly(2‐vinylpyridine), at a nonstoichiometric mixing ratio, was studied. Various methods, such as viscometry, turbidimetry, electrophoresis, and optical spectroscopy, were used to investigate the complexes with respect to their composition, structure, and stability in aqueous systems of different ionic strengths. A gel‐like structure was proposed for the nonstoichiometric polyelectrolyte complexes. Two steps of complex formation—ionic bond formation followed by its rearrangement—were identified. The conformational change of the polyelectrolyte chains in the complexes, responsible for the slower and latter step, was followed by viscometry, and the results were interpreted on the basis of a model proposed for the kinetics of swelling of hydrogels. A similarity was found between the kinetics of diffusion of polymer segments responsible for the swelling of a macrogel of a nonionic polymer and the rearrangement of ionic bonds leading to the formation of a nonstoichiometric polyelectrolyte complex el. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2288–2295, 2003     

Photoinduced surface relief gratings in high-Tg main-chain azoaromatic polymer films

We have synthesized two classes of polyureas with mono- and bisazoaromatic groups in their main chains via reactions between isophorone diisocyanate and the corresponding diamines. Holographic gratings were fabricated on azoaromatic polyurea films prepared by spin-coating from solutions. The effect of high glass transition temperature and dipole moment of azo groups on the formation of gratings was investigated. Although the two polymers have relatively high glass transition temperatures (197 and 236°C), chromophore alignment was induced by laser beam irradiation at modest light intensities. Regularly spaced surface relief gratings on the polymer film were also recorded upon exposure to an interference pattern of two polarized argon laser beams. Erasure could be achieved by heating above T_g or by exposure to one of the beams in a manner similar to low-T_g side-chain azo polymers. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 283–289, 1998     

Luminescence of monolayer thin films of the fully conjugated rigid‐rod polymer poly(p‐phenylenebenzobisthiazole)

Poly(p‐phenylenebenzobisthiazole) (PBT) is a heterocyclic, aromatic rigid‐rod polymer with a fully conjugated backbone and excellent dimensional, thermo‐oxidative, and solvent stabilities. A PBT polymer with an intrinsic viscosity of 18.0 dL/g was dissolved in methanesulfonic acid or Lewis acid. The PBT solution was spin‐coated and doctor‐bladed for freestanding films or onto an indium tin oxide (ITO) substrate. The acid was removed via coagulation. Scanning electron microscopy determined that the resultant film thicknesses were about 340 and 60 nm for PBT freestanding films and films on the ITO substrate, respectively. X‐ray scattering demonstrated that the freestanding films were in‐plane isotropic without long‐range order. The freestanding films were excited with a He‐Cd laser at 325 nm for photoluminescence (PL) response. PL spectra showed a distinct intensity maximum at 580 nm, regardless of the film‐forming conditions. After the films cooled to 67 K, the PL maximum shifted to 566 nm with enhanced intensity. Aluminum was evaporated onto the monolayer PBT thin film on the ITO substrate as an electron injector for electroluminescence (EL) response. Diodic electric behavior was observed for all monolayer PBT EL devices for the first time. A threshold voltage as low as 4 V was achieved for the monolayer EL devices. In addition, PBT EL spectra were tunable, with a maximum intensity at 570 nm at a bias voltage of 4.5 V changing to 496 nm at 7.5 V (i.e., a blueshift) with greatly increased intensity. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1760–1767, 2002     

Synthesis and nonlinear optical properties of methacrylate polymers based on 2‐[4‐(N‐methyl,N‐hydroxyethylamino)phenylazo]‐phenyl‐6‐nitrobenzoxazole chromophore

Methacrylate polymers containing different molar contents of nonlinear optical (NLO) active molecular segments based on 2‐[4‐(N‐methyl,N‐hydroxyethylamino)phenylazo]‐phenyl‐6‐nitrobenzoxazole chromophores were synthesized, and their phase behavior and second‐order NLO properties were investigated. Polymers containing 6–17 mol % chromophore segments allowed the preparation of amorphous and optically clear thin films. Some mesomorphic structuration was exhibited by a polymer with 33 mol % chromophoric units. However, this feature did not prevent the possibility of investigating the NLO properties. Nonlinear resonance‐enhanced d₃₃ coefficients were determined by second harmonic generation experiments on spin‐coated, corona‐poled thin films at λ = 1064 nm. Values ranging from 40 to 60 pm/V were measured with increasing chromophore molar contents. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1841–1847, 2003     

Light‐emitting diodes and lasers based on polymer films doped with small organic molecules and rare‐earth complexes

We investigated the lasing properties of optically pumped polymer films. Amplified spontaneous emission (ASE) around 400 nm was observed in polymer films of polystyrene (PS) and poly(N‐vinylcarbazole) (PVK) doped up to 20% with the hole‐transporting organic molecule N,N′‐bis(3‐methylphenyl)‐N,N′‐diphenylbenzidine (TPD). Thus, TPD‐based films are candidates for blue‐emitting organic diode lasers. Films containing several semiconducting organic molecules and polymers and rare‐earth complexes were also investigated. Energy transfer was observed in PVK films doped with various europium and samarium complexes. PS films containing the electron‐transporting organic molecule 2‐(4‐biphenylyl)‐5‐(4‐tert‐butylphenyl)‐1,3,4‐oxadiazole and small amounts of TPD also showed energy transfer to the europium complexes, but not to the samarium ones. None of these films demonstrated ASE; therefore, they are not appropriate for lasing purposes. However, because rare‐earth ions have very sharp emission spectra, these materials are candidates for very monochromatic light‐emitting diodes. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2706–2714, 2003     

Synthesis and optical properties of novel blue‐light‐emitting poly(p‐phenylene vinylene) derivatives with pendant oxadiazole or cyano groups

Two novel poly(p‐phenylene vinylene) polymers, which carried side substituents with cyano groups or 1,3,4‐oxadiazole, were synthesized by Heck coupling. They consisted of alternating conjugated segments and nonconjugated aliphatic spacers. The polymers had moderate molecular weights, were amorphous, and dissolved readily in tetrahydrofuran and halogenated organic solvents. They were stable up to approximately 340 °C in N₂ and 290 °C in air, and the anaerobic char yield was around 60% at 800 °C. The polymer with cyano side groups emitted blue light in solutions and thin films with identical photoluminescence (PL) maximum at 450 nm; this supported the idea that chain interactions were hindered even in the solid state. The PL maximum of this polymer in thin films was blueshifted upon annealing at 120 °C, indicating a thermochromic effect as a result of conformational changes in the polymer backbone. The polymer containing side substituents with oxadiazole rings emitted blue light in solutions with a PL maximum at 474 nm and blue‐greenish light in thin films with a PL maximum at 511 nm. The PL quantum yields of the polymers in tetrahydrofuran were 0.13–0.24. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1768–1778, 2004     

Photoinduced reversible pH change in aqueous solution of azoaromatic poly(carboxylic acid)

To regulate the pH value of an aqueous solution containing polyelectrolyte by photoirradiation, an azoaromatic poly(carboxylic acid), acrylic acid(AA)-p-phenylazoacrylanilide (PAAn) copolymer was synthesized and the photoresponse of the polymer solution was investigated. AA-PAAn copolymer, which takes a compact form in the ordinary state owing to the presence of azoaromatic side chains, is transformed into an extended form when azoaromatic moieties are isomerized by photoirradiation. Thus, the pH value of the solution can be reversible regulated by irradiation and interruption of light through a change in polymer conformation. The range of the pH change was about 0.15. These phenomena can be explained on the basis of polarity change induced by the photoisomerization of azoaromatic side chains.     

Synthesis,photoluminescence, and electrochromism of polyamides containing (3,6‐di‐tert‐butylcarbazol‐9‐yl)triphenylamine units

A new carbazole‐derived, triphenylamine (TPA)‐containing aromatic dicarboxylic acid monomer, 4,4′‐dicarboxy‐4″‐(3,6‐di‐tert‐butylcarbazol‐9‐yl)TPA, was synthesized, and it led to a series of electroactive aromatic polyamides with main‐chain TPA and pendent 3,6‐bis(tert‐butyl)carbazole units by reacting it with various aromatic diamines via the phosphorylation polyamidation technique. The polyamides were amorphous with good solubility in many organic solvents and could be solution‐cast into flexible and strong films. They showed high glass‐transition temperatures (282–335 °C) and high thermal stability (10% weight loss temperatures >480 °C). The electroactive polymer films had well‐defined and reversible redox couples with good cycle stability in acetonitrile solutions. The polymer films also exhibited fluorescent and multielectrochromic behaviors. The anodically electrochromic polyamide films had moderate coloration efficiency (～100 cm²/C) and high optical contrast ratio of transmittance change (Δ%T) up to 47% at 813 nm and 48% at 414 nm for the green coloring. After hundreds of cyclic switches, the polymer films still retained good redox and electrochromic activity. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Electrochromic material containing unsymmetrical substituted N,N,N′,N′‐tetraaryl‐1,4‐phenylenediamine: Synthesis and their optical,electrochemical, and electrochromic properties

A novel dibromo compound containing unsymmetrical substituted bi‐triarylamine was synthesized. A conjugated polymer was prepared via the Suzuki coupling from the newly prepared dibromo compound and 9,9‐dioctylfluorene‐2,7‐bis(trimethyleneboronate). The glass transition temperature (T_g) of the conjugated polymer was 140 °C, 10% weight‐loss temperatures (T_d10) in nitrogen was 458 °C, and char yield at 800 °C in nitrogen higher than 64%. Cyclic voltammogram of the polymer film cast onto an indium‐tin oxide (ITO)‐coated glass substrate exhibited two reversible oxidation redox couples at 0.70 and 1.10 V versus Ag/Ag⁺ in acetonitrile solution. The polymer films revealed excellent stability of electrochromic characteristics, with a color change from yellow green of the neutral form to the dark green and blue of oxidized forms at applied potentials ranging from 0 to 1.3 V. The color switching time and bleaching time were 4.25 and 7.22 s for 860 nm and 5.51 s and 6.48 s for 560 nm. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1469–1476, 2010     

Synthesis of autophotosensitive hyperbranched polyimides based on 3,3′,4,4′‐benzophenonetetracarboxylic dianhydride and 1,3,5‐tris(4‐aminophenoxy)benzene via end capping of the terminal anhydride groups by ortho‐alkyl aniline

Benzophenone‐containing, anhydride‐terminated hyperbranched poly(amic acid)s were end‐capped by ortho‐alkyl aniline in situ and then chemically imidized, yielding autophotosensitive hyperbranched polyimides. The polyimides were soluble in strong polar solvents, such as N‐methyl‐2‐pyrrolidone, N‐dimethylformamide, dimethylacetamide, and dimethyl sulfoxide. Thermogravimetric analysis revealed their excellent thermal stability, with a 5 wt % thermal loss temperature in the range of 527–548 °C and a10 wt % thermal loss temperature in the range of 562–583 °C. The strong absorption of the polyimide films in ultraviolet–visible spectra at 365 nm indicated that the hyperbranched polyimides were patternable. Highly resolved images with a line width of 6 μm were developed by ultraviolet exposure of the polymer films. A well‐defined image with lines as thin as 3 μm was also patterned, but the lines were rounded at the edges. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2026–2035, 2003     

Formation of pore‐filled ion‐exchange membranes with in situ crosslinking: Poly(vinylbenzyl ammonium salt)‐filled membranes

Robust, polyelectrolyte‐filled, microporous membranes were prepared by the introduction and crosslinking of a preformed polymer within the pores of a poly(propylene) host membrane. Specifically, poly(vinylbenzyl chloride) (PVBCl) was reacted with piperazine or 1,4‐diaminobicyclo[2.2.2]octane in an N,N‐dimethylformamide (DMF) solution contained in the pores of the microporous base membrane. The remaining chloromethyl groups were reacted with an amine, such as trimethylamine, to form positively charged ammonium sites. This simple two‐step procedure gave dimensionally stable, anion‐exchange membranes in which the degree of crosslinking and the mass loading were determined by the concentration of PVBCl and crosslinker in the starting DMF solution. The incorporated polyelectrolyte gel was evenly distributed within the pores of the host membrane with no surface layers present. The membranes are fully characterized. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 807–820, 2001     

New materials for optical rectification and electrooptic sampling of ultrashort pulses in the terahertz regime

The synthesis and nonlinear optical characterization of new electrooptic (EO) materials useful for terahertz (THz) applications is presented. Semiempirical calculations were used to guide the development of a series of chromophores on the basis of 2‐dicyanomethylen‐3‐cyano‐4,5,5‐trimethyl‐2,5‐dihydrofuran acceptors acting as guests in polymer films used in the generation of THz radiation via optical rectification. Amorphous films, 65–250 μm thick, with EO coefficients as high as 52 pm/V at 785 nm were used to generate sub‐picosecond pulses with bandwidths up to 3 THz. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2492–2500, 2003     

Self‐crosslinking borate anions for the production of tough UV‐cured polyelectrolyte surfaces

The first anion with four polymerizable groups has been synthesized and used to produce durable, crosslinked polyelectrolyte (PE) coatings in a single step. Sodium tetrakis(4‐vinylphenyl)borate (NaBSty₄) was produced by the reaction of BCl₃ and the Grignard of 4‐bromostyrene. The full series of borates NaBPh_xSty_4?x, x = 1?3, were also synthesized analogously by reaction of the styryl‐Grignard and PhBCl₂, Ph₂BCl, or Ph₃B. Anion exchange of the borates with tributyl 4‐vinylbenzylphosphonium chloride gave a family of organic salts developed for applications in photopolymerized coatings. The percent UV cure of the polymer films was determined by infrared spectroscopy and this relative level of curing was corroborated by differential scanning calorimetry analysis. The degree of crosslinking imparted to the polymer films by the different monomers has resulted in varied mechanical properties, which were probed by diamond tip scratch tests and nanoindentation. These clearly demonstrated that as the number of polymerizable groups increased, the film hardness increased correspondingly. The final hardness of the films exceeds those of other related systems and identifies styryl borates as viable crosslinking additives in UV curable technologies, especially in the production of durable PE films. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis of PEG‐PNIPAM‐PLys hetero‐arm star polymer and its variation of thermo‐responsibility after the formation of polyelectrolyte complex micelles with PAA

A hetero‐arm star polymer, poly(ethylene glycol)‐poly(N‐isopropylacrylamide)‐poly(L‐lysine) (PEG‐PNIPAM‐PLys), was synthesized by “clicking” the azide group at the junction of PEG‐b‐PNIPAM diblock copolymer with the alkyne end‐group of poly(L‐lysine) (PLys) homopolymer via 1,3‐dipolar cycloaddition. The resultant polymer was characterized by gel permeation chromatography, proton nuclear magnetic resonance, and Fourier transform infrared spectroscopes. Surprisingly, the PNIPAM arm of this hetero‐arm star polymer nearly lose its thermal responsibility. It is found that stable polyelectrolyte complex micelles are formed when mixing the synthesized polymer with poly(acrylic acid) (PAA) in water. The resultant polyelectrolyte complex micelles are core‐shell spheres with the ion‐bonded PLys/PAA chains as core and the PEG and PNIPAM chains as shell. The PNIPAM shell is, as expected, thermally responsive. However, its lower critical solution temperature is shifted to 37.5 °C, presumably because of the existence of hydrophilic components in the micelles. Such star‐like PEG‐PNIPAM‐PLys polymer with different functional arms as well as its complexation with anionic polymers provides an excellent and well‐defined model for the design of nonviral vectors to deliver DNA, RNA, and anionic molecular medicines. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1450–1462, 2009     

Aqueous developable dual switching photoresists for nanolithography

Photon‐mediated switching of polymer solubility plays a crucial role in the manufacture of integrated circuits by photolithography. Conventional photoresists typically rely on a single switching mechanism based on either a change in polarity or, molecular weight of the polymer. Here we report a photoresist platform that uses both mechanisms. The molecular weight switch was achieved by using a poly(olefin sulfone) designed to undergo photo‐induced chain scission. The polarity switch was achieved using pendant groups functionalized with o‐nitrobenzyl esters. These are hydrophobic photosensitive‐protecting groups for hydrophilic carboxylic acids. On irradiation, they are cleaved, making the polymer soluble in aqueous base. Importantly, the resists do not contain photoacid generator, so do not suffer from problems associated with acid diffusion that are detrimental to pattern fidelity. The 193 nm photochemistry of polymer thin films was followed using grazing angle attenuated total reflectance Fourier transform infrared spectroscopy, variable angle spectroscopic ellipsometry, and measurements of solubility in aqueous base. The nanoscale patterning performance of the polymers was also assessed using 193 nm interference lithography and electron‐beam lithography. The implications of using dual switching mechanisms are discussed. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Poly(perylene‐alt‐phenyleneethynylene)s with multiple pendant ester groups in various lengths: Synthesis,photophysics and selective hydrolysis

Five fluorescence polymers with poly(perylene‐alt‐phenyleneethynylene)s (PPPEs) backbone and multiple side chains containing ester‐groups were synthesized via Sonogashira coupling reaction. These polymers were soluble in common organic solvents to form red‐orange solution. The polymer powders had dark red color. The absorption/emission spectra of these polymers were similar, with absorption bands between 300 and 600 nm and an emission peak between 520 and 700 nm. Furthermore, the ester groups of the side chains were partially or completely hydrolyzed, resulting in the fluorescence PPPEs with tunable density of carboxylic acid functional groups on the polymer chains as interaction/reaction sites for further applications. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1880–1886     

Modification of the microstructure of emulsion polymers

The effect of treating several commercially important emulsion polymers with different initiator systems was investigated. The initiator system producing highly reactive tert‐butoxyl radicals was able to cause polymer modification. This represented an opportunity to extend the range of properties achievable with a given emulsion polymer. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3744–3749, 2003     

Conjugated polymer nanoparticles with aggregation induced emission characteristics for intracellular Fe3+ sensing

In this article, a novel zwitterionic conjugated polyelectrolyte containing tetraphenylethene unit was synthesized via Pd‐catalyzed Sonogashira reaction. The resulting polymer (P2), which exhibited typical aggregation‐induced emission (AIE) properties, was weakly fluorescent in dilute DMSO solution and showed bright fluorescence emissions when aggregated in DMSO/water mixtures or fabricated into conjugated polymer nanoparticles (CPNs). The nanoparticles from P2 could be prepared by reprecipitation method with an average diameter around 23 nm. Notably, the cell‐staining efficiencies of lipid‐P2 nanoparticles could be enhanced with lipid encapsulation and these nanoparticles were endocytosed via caveolae‐mediated and clathrin‐mediated endocytosis pathways. Furthermore, the lipid‐P2 nanoparticles with low cytotoxicity, high photostability and efficient cell staining ability could be employed for in vitro detection of Fe³⁺ ions in A549 cells. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1686–1693     

Metalloporphyrin–polyelectrolyte assemblies in aqueous solution: Influence of the metal center and the polyelectrolyte architecture

This study investigates the influence of different metal centers in porphyrins and of different polyelectrolyte architectures on the formation of supramolecular metalloporphyrin–polyelectrolyte assemblies in aqueous solution via electrostatic self‐assembly. Metal‐analogues of the tetravalent anionic meso‐tetrakis(4‐sulfonatophenyl)‐porphyrin (with Zn²⁺, Co²⁺, Ni²⁺, Mn³⁺, and Fe³⁺) are combined with the cationic dendrimer of generation 4 or with the linear polydiallyldimethyl‐ammoniumchloride. Dynamic light scattering and atomic force microscopy reveal that the different molecular geometries of the metalloporphyrins resulting from axial ligands determine the size and the stability of the aggregates. A thermodynamic study elucidates the importance of the polymer architecture in controlling the size of the assembly and the role of the metal center. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 484–500