Novel electroluminescent cationic polyelectrolyte based on poly[(fluorene‐2,7‐diylvinylene)‐alt‐(1,4‐phenylenevinylene)] and its precursor

A novel conjugated poly[(fluorene‐2,7‐vinylene)‐alt‐(1,4‐phenylenevinylene)] derivative 2 with quaternizable tertiary amino groups was synthesized by Heck coupling of a substituted 2,7‐dibromofluorene and 1,4‐dialkoxy‐2,5‐divinylbenzene. The corresponding quaternary ammonium cationic polyelectrolyte 3 was obtained by the treatment of 2 with bromoethane. Both polymers were soluble in common organic solvents, like tetrahydrofuran, chloroform, and dichloromethane. Polymer 3 showed a limited solubility in alcohols and was insoluble in water. Photophysical and electrochemical properties of the resulting polymers were fully investigated. An intensive green photoluminescence (PL) with maxima at 550 and 545 nm was observed from thin films of 2 and 3 polymers, respectively, red‐shifted compared with the PL emission spectra measured in the solution. The electrochemical band gaps were 2.38–2.45 eV. Single‐layer and double‐layer (with poly[3,4‐(ethylenedioxy)thiophene]/poly (styrenesulfonate) (PEDOT:PSS)) light‐emitting devices (LEDs) with ITO and Al electrodes were prepared and studied. They emitted a green light and their electroluminescence (EL) spectra were similar to those of PL thin films. The external EL efficiency was determined to be 0.43 and 0.32% for ITO/PEDOT:PSS/ 2 /Al and ITO/PEDOT:PSS/ 3 /Al LEDs, respectively. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1016–1027, 2007     

Enhancing quantum efficiency of MEH‐PPV through the reduction of chain aggregations by thermal treatments

The quantum efficiencies of photoluminescence (PL) and electro‐luminescence (EL) of poly[2‐methoxy‐5‐(2′‐ethyl‐hexyloxy)‐1,4‐phenylenevinylene] (MEH‐PPV) were significantly increased by heat treatments under vacuum with further removing the undissolved portion. The UV–vis absorption was found to decrease with heating time, while PL intensity increased. The maximum PL quantum yield was 6.5 times that of the untreated MEH‐PPV, which was attributed to the reduction of chain aggregations and the interruption of conjugation length. The maximum EL quantum yield of their prepared ITO/PANI/MEH‐PPV/Ca/AL light emitting diodes (PLED) was 46 (at 3 V) times that of the untreated sample. A typical turn‐on voltage of 2.5 V for MEH‐PPV PLED was able to decrease to 1 V after heat treatments, which was believed to result from the decrease of cis linkages in the polymer chains as revealed by the ¹H NMR spectroscopy. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1705–1711, 2005     

Synthesis and optoelectronic properties of silole‐containing polyfluorenes with binary structures

2,5‐Bis(2‐bromofluorene‐7‐yl)silole was prepared by a modified one‐pot synthesis with a reverse addition procedure, from which novel silole‐containing polyfluorenes with binary random and alternating structures (silole contents between 4.5 and 25% and high M_w up to 509 kDa were successfully synthesized. The well‐defined repeating unit of the alternating copolymer comprises a terfluorene and a silole ring. Optoelectronic properties including UV absorption, electrochemistry, photoluminescence (PL), and electroluminescence (EL) of the copolymers were examined. The different excitation energy transfers from fluorene to silole of the copolymers in solution and in the solid state were compared. The films of the copolymers showed silole‐dominant green emissions with high absolute PL quantum yields up to 83%. EL devices of the copolymers with a configuration of ITO/PEDOT/copolymer/Ba/Al displayed exclusive silole emissions peaked at around 543 nm and the highest EL efficiency was achieved with the alternating copolymer. Using the alternating copolymer and poly(9,9‐dioctylfluorene) as the blend‐type emissive layer, a maximum external quantum efficiency of 1.99% (four times to that of the neat film) was realized, which was a high efficiency so far reported for silole‐containing polymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 756–767, 2007     

Synthesis and evaluation of photoluminescent and electrochemical properties of new aromatic polyamides and polyimides with a kink 1,2‐phenylenediamine moiety

A series of novel triphenylamine‐containing aromatic polyamides and polyimides having a crank and twisted noncoplanar structures were synthesized in inherent viscosities of 0.14–0.64 dL/g and 0.11–0.67 dL/g, respectively. These polymers had useful levels of thermal stability associated with relatively high glass‐transition temperatures (174–311 °C). They exhibited strong UV–Vis absorption bands at around 300 nm in NMP solutions. The PL spectra of these polymers in NMP solutions (1 × 10^?5 M) showed maximum peaks around 396–479 nm. The hole‐transporting and electrochromic properties were examined by electrochemical and spectroelectrochemical methods. Cyclic voltammetry (CV) of the polymer films cast onto an indium‐tin oxide (ITO)‐coated glass substrate exhibited two reversible oxidation redox couples at potentials of 0.70–1.01 V and 1.10–1.46 V, respectively, vs. Ag/AgCl in acetonitrile solution. The polymer films revealed electrochromic characteristics, with a color change from neutral pale yellowish to green and then to a blue oxidized form at applied potentials ranging from 0.00 to 1.75 V. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2587–2603, 2006     

Bipolar poly(p‐phenylene vinylene)s bearing electron‐donating triphenylamine or carbazole and electron‐accepting quinoxaline moieties

Two new poly(phenylene vinylene)s (PPVs) carrying electron‐donating triphenylamine or carbazole and electron‐deficient quinoxaline units were synthesized and characterized. Their properties were compared with those of PPV containing only quinoxaline unit. The two polymers showed PL maximum at 501–510 in solution and 533–540 in thin film. Because of the presence of electron donor and acceptor units they displayed strong intramolecular charge transfer (ICT) effects; hence, low‐photoluminescence quantum yields. The polymers showed reversible electrochemical reduction with electron affinity of 2.75 eV and irreversible oxidation with ionization potential of 5.10–5.24 eV. Single‐layer LED of configuration ITO/PEDOT/polymer/Al showed low turn‐on voltage at 5 V, but limited brightness of 50–60 cdm^?2. The electroluminescence maximum was voltage‐tunable varying from 500 to 542 nm. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2367–2378, 2008     

Intramolecular energy transferable (2,2‐diphenylvinyl)phenyl substituted poly(p‐phenylenevinylene) derivative with efficient photoluminescence and electroluminescence

A poly(p‐phenylenevinylene) (PPV) derivative containing a bulky (2,2‐diphenylvinyl)phenyl group in the side chain, EHDVP‐PPV, was synthesized by Gilch route. The reduced tolane‐bisbenzyl (TBB) defects, as well as the structure of the polymer, was confirmed by various spectroscopic methods. The intramolecular energy transfer from the (2,2‐diphenylvinyl)phenyl side group to the PPV backbone was studied by UV‐vis and photoluminescence (PL) of the obtained polymer and model compound. The polymer film showed maximum absorption and emission peaks at 454 and 546 nm, respectively, and high PL efficiency of 57%. A yellow electroluminescence (λ_max = 548 nm) was obtained with intensities of 6479 cd/m² when the light‐emitting diodes of ITO/PEDOT/EHDVP‐PPV/LiF/Al were fabricated. The maximum power efficiency of the devices was 0.729 lm/W with a turn‐on voltage of 3.6 V. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5636–5646, 2004     

Enhancement of color purity in blue light emitting poly(fluorene)s and poly(p‐phenylene)s with 2,6‐distyrylpyridine kinked segments along the backbone

2,6‐bis(4‐Distyrylpyridine) ( 1 ) was synthesized by the condensation of 2,6‐dimethylpyridine with 4‐bromobenzaldehyde. Two new series of soluble random or alternating polyfluorenes ( PF‐Py ) and poly‐p‐phenylenes ( PP‐Py ) with various compositions were prepared by Suzuki coupling utilizing 1 as a comonomer. These polymers showed optical band gaps of 3.00–3.07 eV and photoluminescence (PL) quantum yields in solution of 0.37–0.91 for PF‐Py and 0.29–0.38 for PP‐Py . Polymers PF‐Py emitted blue light with PL maximum at 410–424 nm in solution and 406–428 nm in thin films that was red shifted with increasing distyrylpyridine content. Polymers PP‐Py behaved as blue emitters both in solution and in solid state, with PL maximum at 416–436 nm. The optical properties of these polymers could be tuned by the reversible protonation–deprotonation process of the pyridine ring. The emitted color of the polymers in solution and thin film could be changed continuously between blue and green (PL maximum up to about 520 nm) by exposing the polymers to the acid or base environment. Thin films of PF‐Py displayed excellent color stability with a small red shift of 10 nm but without additional emission band in the long wave region of the spectrum, even after being annealed at high temperature for a long time. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4486–4495, 2005     

Polyfluorenes minimally doped with 1,4‐bis(2‐thienyl‐2‐cyanovinyl)benzene chromophore: Their synthesis,characterization, and application to white‐light‐emitting materials

Copolyfluorenes ( PFR1 and PFR2 ), chemically doped with 0.1 and 0.025 mol % 2,5‐dihexyloxy‐1,4‐bis(2‐thienyl‐2‐cyanovinyl)benzene (MR chromophere) were synthesized by the Suzuki coupling reaction. The PFR s were used to fabricate white‐light‐emitting devices through incomplete energy transfer. Because of the low content of the MR chromophore, the optical, thermal, and electrochemical properties of the PFR s were almost identical to those of polyfluorene, except for their photoluminescent (PL) and electroluminescent (EL) properties. The copolymer films showed PL peaks at about 428 and 570 nm originating from fluorene segments and MR chromophores, respectively. Compared with the model compound ( MR ), the polymer chains extended the conjugation length of the MR chromophores and exhibited a 20–48 nm red‐shift in the emission band. In addition, the lower LUMO level of the MR (?3.27 eV) was expected to improve the electron injection. The EL devices [ITO/PEDOT:PSS/ PFR s/Ca (50 nm)/Al (100 nm)] showed a broad emission band, covering the entire visible region, with chromaticity coordinates of (0.36, 0.35) and (0.32, 0.30) for PFR1 and PFR2 devices, respectively. The emission color of the PFR2 device was very similar to that of a pure white light (0.33, 0.33); and the maximal brightness and current efficiency were 3011 cd/m² and 1.98 cd/A, respectively, which surpass those found for polyfluorene devices (1005 cd/m², 0.28 cd/A). A). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3703–3713, 2008     

Synthesis and electro‐optical properties of light‐emitting polymers containing oxadiazole derivatives for light‐emitting diodes applications

Two PPV‐based bipolar polymers containing 1,3,4‐oxadiazole pendant groups were synthesized via the Gilch polymerization reaction for use in light‐emitting diodes (LEDs). The resulting polymers were characterized using ¹H and ¹³C NMR, elemental analysis, DSC, and TGA. These polymers were found to be soluble in common organic solvents and are easily spin‐coated onto glass substrates, producing high optical quality thin films without defects. The electro‐optical properties of ITO/PEDOT/polymer/Al devices based on these polymers were investigated using UV‐visible, PL, and EL spectroscopy. The turn‐on voltages of the OC₁Oxa‐PPV and OC₁₀Oxa‐PPV devices were found to be 8.0 V. The maximum brightness and luminescence efficiency of the OC₁Oxa‐PPV device were found to be 544 cd/m² at 19 V and 0.15 cd/A, respectively. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1098–1110, 2008     

Synthesis and characterization of novel poly(p‐phenylenevinylene) derivatives containing phenothiazine‐5‐oxide and phenothiazine‐5, 5‐dioxide moieties

PPV‐based copolymers containing phenothiazine‐5‐oxide and phenothiazine‐5, 5‐dioxide moieties have been successfully synthesized by Wittig‐Horner reaction and characterized by means of UV‐vis, photoluminescence, electroluminescence spectra, and cyclic voltammetry. All of these copolymers can be dissolved in common organic solvents such as chloroform, tetrahydrofuran, and toluene. The PL maxima in the film state are located at 582, 556, and 552 nm for P1, P2, and P3, respectively. The HOMO and LUMO levels of P2 are found to be ?5.21 and ?2.68 eV, respectively; whereas those of P3 are found to be ?5.26 and ?2.71 eV, respectively. The cyclic voltammetry result indicates that the conversion of electron‐donating sulfide to electron‐withdrawing sulfoxide or sulfone group in polymers plays a dominating role in increasing its oxidation potential. Yellowish‐green light ranging from 568 to 540 nm was observed for the single layer device with the configuration of ITO/Polymer/Ca/Al. Double layer devices with Zn (BTZ)₂ as a hole blocking layer exhibited enhanced EL performance compared to the single layer devices. The maximum brightness of the double layer devices of P1, P2, and P3 is 278, 400, and 796 cd/m², respectively. The results of EL and electrochemical analyses revealed that they are promising candidate materials for organic, light‐emitting diodes with hole‐transporting ability. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4291–4299, 2007     

Synthesis and characterization of polyfluorenevinylene with cyano group and carbazole unit

The present investigation deals with the synthesis, characterization, and EL properties of new polyfluorenevinylenes, CzCNPFVs, with cyano‐substituted vinylene unit and carbazole pendant. In CzCNPFVs, synthesized by the Knoevenagel condensation, the carbazole pendant was introduced to improve the efficiency of reported CNPFV. The PL emission spectra of the CzCNPFVs in chloroform solution show maximum peaks at 476–479 nm. In thin films, maximum peaks of the CzCNPFVs appeared at 501–504 nm, red‐shifted around 25 nm as compared to those in solution. The emission maxima of the EL spectra of the polymers appear at around 496–504 nm. The maximum luminescence (L_max) of CzCNPFV2 of the device with the configuration of ITO/PEDOT/CzCNPFVs/Ca/Al is 1724 cd/m² at 8 V. The maximum luminescence efficiency of CzCNPFV1 is 0.18 cd/A. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6540–6551, 2009     

Single layer light‐emitting diodes from copolymers comprised of mesogen‐jacketed polymer containing oxadiazole units and PVK

A series of copolymers PCt‐co‐Poly(N‐vinylcarbazole) were synthesized through common radical polymerization, in which P‐Ct as a kind of mesogen‐jacketed liquid crystalline polymer was introduced, and the effects of copolymers composing variation on the optical properties of the polymers were studied. The structures and properties of the copolymers were characterized and evaluated by thermogravimetric (TGA), UV, photoluminescence (PL), cyclic voltammetry (CV), and electroluminescence (EL) analyses. All the polymers enjoy high thermal stability. PL peaks in the film show blue‐shift compared with in solutions and fluorescent quantum efficiency decreased with the N‐vinylcarbazole (nvk) content increasing, which supported the efficient energy transfer from nvk units to the oxadiazole units. CV revealed that, with the incorporation of nvk to the copolymer, these copolymers had high‐lying HOMO energy levels ranging from ?5.94 to ?6.09 eV. Single‐layer light‐emitting diodes (LEDs) with the configuration of ITO/PEDOT/PCt‐nvk/Mg:Ag/Ag were fabricated, which emit a blue light around 450 and 490 nm with a maximum luminance of 703 cd/m². The device performance varies with the content of nvk and device configuration, with device configuration ( b ) and PCt‐nvk8 giving the best value of external quantum efficiency of 0.27%. We show here that by proper design copolymer structure and modification of device configuration can exhibit strong blue EL in higher external quantum efficiency. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1843–1851, 2008     

Synthesis,characterization, and application of light‐emitting copolyfluorenes slightly doped with distyrylbenzene derivatives

Copolyfluorenes PFG1～PFG4 slightly doped with 0.006–0.5 mol % of 2,5‐dihexyloxy‐1,4‐bis(2‐phenyl‐2‐cyanovinyl)benzene (green chromophore) were synthesized by the Suzuki coupling reaction to be evaluated as hosts for white‐light electroluminescent (EL) devices. Their optical, thermal and electrochemical properties were almost identical to those of polyfluorene ( PF ) due to minimal chromophore content. However, the electroluminescent (EL) spectra of the PFGn were very different from photoluminescence spectra in film state. Relative intensity of green emission (ca. 521 nm) in EL spectra are much stronger than those in PL spectra, which can be attributed to charges trapping in the chromophores due to its narrow band gap (E_g ≈ 2.56 eV). The performance of EL devices [ITO/PEDOT:PSS/polymer/Ca (50 nm)/Al (100 nm)] were improved with an increase in chromophore content. The PFG4 device revealed the best performance (6790 cd/m², 1.69 cd/A), and the PFG1 and PFG2 devices exhibited comparable intensity in blue and green emissions. Blend EL devices were fabricated by using the PFGn as the hosts and a red iridium complex [Ir(piq)₂(acac)] as dopant. By controlling the amount of the iridium complex, the white‐light emitting device was achieved with PFG2 , with maximum brightness and CIE coordinate being 4120 cd/m² and (0.31, 0.28), respectively. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 149–160, 2009     

Synthesis and properties of conjugated copolycondensates consisting of carbazole‐2,7‐diyl and fluorene‐2,7‐diyl

Carbazole and fluorene‐based random and alternating copolycondensates were synthesized to develop high‐performance blue light‐emitting polymers by improving electron injection ability of poly(N‐aryl‐2,7‐carbazole)s that showed intense blue electroluminescence (EL) with good hole‐injection and ‐transport ability. These copolycondensates absorbed light energy at about λ_max = 390 nm in CHCl₃ and 400 nm in film state, and fluoresced at about λ_max = 417 nm in CHCl₃ and 430 nm in the thin film state. Energy gaps between highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) of them were about 2.9 eV, and the energy levels of LUMO situated lower than that of corresponding polycarbazole. Polymer light‐emitting diode devices having configuration of indium tin oxide/poly(3,4‐ethylenedioxythiophene)‐poly(styrenesulfonate)/polymer/CsF/Al using the copolycondensates, poly(N‐arylcarbazole‐2,7‐diyl), and poly(9,9‐dialkylfluorene‐2,7‐diyl), emitted bluish EL at operating voltages lower than 7 V. The device embedded the random copolycondensate showed notably higher performance with maximum luminance of 31,200 cd m^?2 at 11.0 V, and the current efficiencies observed under operating voltages lower than 7 V were higher than those of the other devices. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and optical properties of novel blue‐light‐emitting poly(p‐phenylene vinylene) derivatives with pendant oxadiazole or cyano groups

Two novel poly(p‐phenylene vinylene) polymers, which carried side substituents with cyano groups or 1,3,4‐oxadiazole, were synthesized by Heck coupling. They consisted of alternating conjugated segments and nonconjugated aliphatic spacers. The polymers had moderate molecular weights, were amorphous, and dissolved readily in tetrahydrofuran and halogenated organic solvents. They were stable up to approximately 340 °C in N₂ and 290 °C in air, and the anaerobic char yield was around 60% at 800 °C. The polymer with cyano side groups emitted blue light in solutions and thin films with identical photoluminescence (PL) maximum at 450 nm; this supported the idea that chain interactions were hindered even in the solid state. The PL maximum of this polymer in thin films was blueshifted upon annealing at 120 °C, indicating a thermochromic effect as a result of conformational changes in the polymer backbone. The polymer containing side substituents with oxadiazole rings emitted blue light in solutions with a PL maximum at 474 nm and blue‐greenish light in thin films with a PL maximum at 511 nm. The PL quantum yields of the polymers in tetrahydrofuran were 0.13–0.24. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1768–1778, 2004     

Electroluminescent copolymers based on dihexylfluorene and 2‐{2,6‐bis[2‐(4‐diphenylaminophenyl)vinyl]pyran‐4‐ylidene}malononitrile units

A series of statistical copolymers (poly[(9,9‐di‐n‐hexylfluorene)‐co‐2‐{2,6‐bis‐[2‐(4‐diphenylaminophenyl)vinyl]pyran‐4‐ylidene}malononitrile) were synthesized by the Suzuki coupling reaction. The copolymers showed absorption bands at 379 and 483–489 nm, which were attributed to the oligofluorene segments and the segments containing 2‐[2,6‐bis(2‐{4‐[(4‐bromophenyl)phenylamino]phenyl}vinyl)pyran‐4‐ylidene]malononitrile ( 3 ), respectively. The absorption band around 483–489 nm increased with the feed ratio of 3 . The photoluminescence (PL) spectra of the copolymers showed emission bands at 420 and 573–620 nm. As the feed ratio of 3 increased, the PL emission in the longer wavelength region redshifted, and the intensity increased as well. The electroluminescence (EL) spectrum of the copolymers showed a very weak emission at 420 nm. The PL and EL emission colors redshifted dramatically with the increase in the feed ratio of 3 . The highest occupied molecular orbital and lowest unoccupied molecular orbital levels of the model compound (2‐{2,6‐bis[2‐(4‐diphenylaminophenyl)vinyl]pyran‐4‐ylidene}malononitrile) were determined to be ?5.34 and ?3.14 eV, respectively. It was concluded that energy transfer took place from the oligofluorene blocks to the segments containing 3 and that direct charge trapping occurred in the segments containing 3 during the EL operation. The Commission Internationale de l'Eclairage (CIE) chromaticity coordinates of the copolymer (x = 0.63, y = 0.37) containing 10 mol % 3 were very close to those (x = 0.67, y = 0.33) for National Television System Committee (NTSC) red with a maximum photometric power efficiency of 0.27 cd/A. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3729–3737, 2006     

Synthesis and characterization of light‐emitting oligo(p‐phenylene‐vinylene)s and polymeric derivatives containing three‐ and five‐conjugated phenylene rings

Several series of light‐emitting oligo(p‐phenylene‐vinylene)s (BIII and BV series containing three‐ and five‐conjugated phenylene rings) with various side groups and end groups attached to the cores were synthesized and characterized. The analogous PBV polymers, derived from the BV series, were also synthesized and investigated. Blue and greenish light emissions were observed in the photoluminescence (PL) and electroluminescence (EL) spectra of the blend and pure films with these π‐conjugated structures. In contrast to the three‐conjugated ring oligomers, the five‐conjugated ring derivatives (oligomers and polymers) had larger maximum emission wavelength values of PL and EL emissions. Mesomorphism was introduced into the BV series by the replacement of three‐conjugated rings (BIII series) with five‐conjugated phenyl cores (BV series). The liquid‐crystalline properties of the BV series with end groups (on both end rings) were better than those of analogous BV‐OC₈ without end groups. Polarized PL emissions were obtained by the alignment of liquid‐crystalline phase in rubbing cells. Upon heating, different PL emission wavelengths and intensities were observed in various phases. Not only the solubility and thermal properties but also the PL and EL properties could be effectively adjusted by the attachment of flexible alkoxy groups either on the central rings or on both end rings of the conjugated cores. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 783–800, 2006     

Synthesis and electroluminescent properties of a novel 1,3,4‐oxadiazole‐containing polymer

The new blue light polymer, poly(1′,4′‐phenylene‐1″,4″‐[2″‐(2″″‐ethylhexyloxy)]phenylene‐1‴,4‴‐phenylene‐2,5‐oxadiazolyl) (PPEPPO) was synthesized through the Suzuki reaction of diboronic acid, 2‐methoxy‐[5‐(2′‐ethylhexyl)oxy]‐1,4‐benzene diboronic acid (MEHBBA) and dibromide, 2,5‐bis(4′‐bromophenyl)‐1,3,4‐oxadiazole. This polymer was characterized with various spectroscopic methods. The solid PL spectrum of PPEPPO has a maximum peak at 444 nm corresponding to blue light. Blue LED has been fabricated using this polymer as the electroluminescent layer, ITO as the anode, and aluminum as cathode. This device emitted a blue light, with 40 V of turn‐on voltage. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3086–3091, 2000     

Synthesis and characterization of 9,10‐diphenylanthracene‐based blue light emitting materials

A new series of conjugated polymers having diphenylanthracene vinylene biphenylene and diphenylanthracene vinylene terphenylene in the main chain and fluorene pendant group, were synthesized by nickel catalized Yamamoto coupling and palladium catalized Suzuki coupling. The obtained polymers showed good solubility in the common organic solvent and number average molecular weights of 14,000–9500 with a polydispersity indexes ranging from 1.7 to 2.1. Both polymers possess excellent thermal stability with glass transition temperatures of 123–127 °C and the onset decomposition temperatures of 420–400 °C. The obtained polymers showed blue emission (λ_max = 461 for PFPA and λ_max = 455 nm for PFPAME) in PL spectra, specially, PFPAME containing diphenylanthracene vinylene terphenylenevinylene showed the consistent emission in the solution and film. The double‐layered device with an ITO/PEDOT/PFPAME/LiF/Al structure has a turn‐on voltage of about 5.8 V, maximum brightness of 152 cd/m² and an electroluminescent efficiency of 0.143 lm/W, and stable blue EL emission that is not altered by increased voltage. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5908–5916, 2009     

New colorless substrates based on polynorbornene‐chlorinated polyimide copolymers and their application for flexible displays

Novel polynorbornene (PNB)‐polyimide (PI) copolymers were synthesized based on poly(N‐phenyl‐exo‐norbornene‐5,6‐dicarboximide) (PPhNI) and chlorinated PI (BPDA/TCDB). Polynorbornene copolymers (PNCs) with diverse compositions of anhydride were synthesized via ring opening metathesis polymerization (ROMP) of N‐phenyl‐exo‐norbornene‐5,6‐dicarboximide (PhNI) and exo‐7‐oxanorbornene‐5,6‐dicarboxylic anhydride(exo‐NA), followed by copolymerization through a reaction with aromatic dianhydride (3,3′,4,4′‐biphenyltetra‐carboxylic dianhydride, BPDA) and tetrachlorinated diamine (2,2′,5,5′‐tetrachlorobenzidine, TCDB). The copolymer (PNIC) films exhibited good optical transparency with a transmittance of around 70% at 400 nm and a good thermal stability with a glass transition temperature at 276–300 °C. These flexible films also resisted most organic solvents and chemicals, such as methanol, acetone, tetrahydrofuran, N‐methylpyrrolidone, ethyl acetate, hydrochloric acid, sodium hydroxide, and hydrogen peroxide, etc. Indium tin oxide (ITO) coated thin films were prepared at various substrate deposition temperatures with a radio frequency (r.f.) planar magnetron sputtering system. The ITO thin films that were deposited onto the PNIC copolymer substrates had good electrical and optical properties. An organic light‐emitting device (OLED) was fabricated using the PNIC copolymer substrate with a structure of PNIC08/ ITO (anode)/hole‐transporting layer (HTL)/emitting & electron‐transporting layer (EM&ETL)/aluminum (cathode). The flexible OLED fabricated on the ITO‐grown PNIC substrate exhibited a performance that was comparable to corresponding ITO‐grown glass substrates. Therefore, the ITO‐grown PNIC substrate could possibly be a promising candidate as a substrate for flexible displays. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1806–1814, 2010