Synthesis and properties of a star-shaped organic material with triphenylamine and N-vinyl carbazole units

A starburst triphenylamine cored N-vinyl carbazole (V-Cz) branched compound was designed and synthesized via optimized Heck reaction in a yield of 40-60%.Moderate yield came from decomposition of V-Cz and self-coupling of triiodo-triphenylamine. TCz-TPA adopts a highly twisted propeller conformation by molecular mechanical optimization.It is readily soluble for its highly twisted conformation.Transparent and pinhole free films could be easily fabricated by spin-coating for its starburst structure.It emits blue-greenish light in CH_2Cl_2 peaked at 460 nm with a narrow full-width at half-maximum (FWHM) of 65 nm.As compared, the absorption peaks of the spin-coated film blue shifted and emission peak red shifted to 510 nm with a FWHM of 96 nm.     

SYNTHESIS AND OPTICAL-ELECTRONIC PROPERTIES OF POLY [METHYLTETRAPHENYLPHENYLSILYLENE-CO- BIS（METHYLPHENYLSILYL）ACETYLENE]

Poly(methyltetraphenylphenylsilylene-co-bis(methylphenylsilyl)acetylene) (PSA) was synthesized by the cocondensation reaction of methyltetraphenylphenyldichlorosilane and bis(chloromethylphenylsilyl)acetylene with sodium in toluene. The PSA thus obtained was soluble in most organic solvents, and its molecular weight was smaller than that of poly[(disilanylene)acetylenes] with alkyl- or aryl-substitution because of the great steric congestion of tetraphenylphenyl groups. The optical and electronic properties of the polymer were investigated. The results show that PSA has strong UV absorption and fluorescence emission, the maximum UV absorption wavelength of PSA is 330 nm, which shows a considerable red-shift in comparison with that of poly(methylphenylsilylene-co-methylphenylsilylacetylene) (PSI) and alkylsubstituted poly[(disilanylene)acetylenes]. A strong photoluminescence band at 470 nm in THF and 432 nm in benzene can be observed in the visible region, respectively. Treatment of the films of PSA with I2 vapor afforded conducting films. The conductivity of PSA thin film doped with I2 was measured to be 0.35 Scm-1 in the air which is lower than that of poly(methyltetraphenylphenylsilylene-co-bis(methylphenylsilyl)phenylene), but higher than that of σ-π polymers without tetraphenylphenyl groups. As an explanation, the tetraphenylphenyl group is a large π-electron-conjugated group; after being introduced to the Si atoms of the polysilanes, the interaction between π-electrons of the tetraphenylphenyl groups and the σ-electrons conjugated along the Si-Si bonds is increased strongly, and the σ-electrons can be conjugated more extensively along the main chain of the polysilanes.     

Change Color Effect and Spectral Properties of Gold Nanoparticle-cationic Surfactants System

The change color effect of gold nanoparticle solutions was studied by means of resonance scattering and absorption spectrometry and scan electron microscopy. The red Au nanoparticles with a size of 10 nm exhibit a resonance absorption peak and a resonance scattering peak all at 525 nm. After some inorganic electrolyte was added to a red Au nanoparticles solution, the color of the solution became blue and the absorbance at 600-700 nm was significantly increased. The ratio of the concentration of rnonovalent cations, at which the resonance scattering of the system at 525 nm is maximal to that of divalent cations, is in the range of 100 : 1--100 ; 1. 8. It is in good agreement with the Schulze-Hardy rule of the coagulation value of electrolyte. After adding some cationic surfactants to the above solution, the color of the solution is in deep blue, with two resonance absorption peaks at 550 and 680 nm, and a greatly enhanced resonance scattering peak at 525 nm. The experiments demonstrate that the stronger the hydrophobicity of the cationic surfactant is, the stronger the change color effect of the Au nanoparticle solution promoted by cationic surfactant is. The change color effect of Au nanoparticle solution is resulted from the increased diameter of Au nanoparticles, and the changes of resonance absorotion DeaR and resonance scattering.     

SYNTHESIS AND PHOTOLUMINESCENCE OF AN ANTHRACENE-CONTAINING HYPERBRANCHED POLY（ARYLENEETHYNYLENE）

A hyperbranched poly（aryleneethynylene） containing anthracene chromophore was synthesized by palladiumcatalyzed cross-coupling reaction of 2,4,6-triiodophenyl 9-anthracenylcarboxylate with 9,9-bis[4-（2-propynyloxy）phenyl]- 9H-fluorene. The structure and properties of the polymer are characterized and evaluated by NMR, IR, UV, PL and TGA analyses. The polymer is soluble in common organic solvents, possesses high thermal stability （Td 〉 330℃）, and emits a strong blue light of 465 nm in both solution and solid states.     

IN SITU OBSERVATION OF MELTING AND CRYSTALLIZATION BEHAVIORS OF POLY(ε-CAPROLACTONE) ULTRA-THIN FILMS BY AFM TECHNIQUE

The melting and crystallization behaviors of poly(ε-caprolactone) (PCL) ultra-thin films with thickness from 15 nm to 8 nm were studied by AFM technique equipped with a hot-stage in real-time. It was found that melting can erase the spherulitic structure for polymer film with high thickness. However, annealing above the melting point can not completely erase the tree-like structure for the thinner polymer film. Generally, the structure formation of thin polymer films of PCL is controlled not only by melting and crystallization but also by dewetting during thermal annealing procedures, and dewetting predominates in the structure formation of ultra-thin films. However, the presence of tree-like morphology at 75 °C may be due to the strong interaction between PCL and mica surface, which may stick the PCL chains onto the mica surface during thermal annealing process. Moreover, the growth of the dendrites was investigated and it was found that crystallization is followed from a dewetted sample, and the branches did not grow with the stems. The crystallization of polymer in the ultra-thin films is a diffusion-controlled process. Both melting and crystallization behaviors of PCL in thin films are influenced by film thickness.     

Growth, Band Structure and Optical Properties of LiSrBO3 Crystal

The bulk crystal of LiSrBO3 (8.39 g) with a size of 21mm×20mm×15mm was grown by high temperature solution growth method. The relationship between growth habit and crystal structure was discussed. The transmission spectrum shows an UV absorption edge at about 300 nm. The melting temperature of this crystal was determined to be 942 ℃ by DTA-TG measurement. The band structure of the LiSrBO3 crystal was studied by means of the first principle method. An indirect band gap was found to be about 4.0 eV,and a low dielectric constant was estimated to be about 1.9 in terms of theoretical results.     

Synthesis and luminescent properties of a silylated-terpyridine derivative and its metalated complexes in solutions and self-assembled monolayers

A silylated-terpyridine(Si TPy) derivative was newly synthesized and reacted with various transition metal ions in the solutions and self-assembled monolayers(SAMs).Composition and morphology of the SAMs were characterized by using absorption spectra,X-ray photoelectron spectra and atomic force microscope.The silylated-TPy compound gave off a luminescent emission at about 456 nm,which slightly shifted to 452 nm in the Zn2+-Si TPy and Fe2+-Si TPy metalated complexes.The absorbed energy can be further transferred to lanthanide ions(Tb3+and Eu3+) to give off the typical emissions of the lanthanide complexes together with an emission of the silylated-TPy at about 363 nm.     

Synthesis and characterization of a one-dimensional polymeric copper(Ⅱ)-tetrathioporphyrazine

The title polymer PCuS4Pz was synthesized by reaction of 2,3-dicyano-5,6-dihydro-1,4-dithiin,pyromellitic dianhydride and urea with cuprous salt in optimized gentle method.The structure and properties of the PCuS4Pz were characterized by elemental analysis,X-ray powder diffraction,IR,UV-Vis,fluorescence and EPR spectra and variable-temperature magnetic susceptibility.The polymer is black sublimable crystallite and the degree of polymerization has been found to be n>4.The PCuS4Pz in H2SO4 exhibits intensive absorption bands at 236,342,656 and 767 nm and intensive fluorescence band at 410 nm or 464 nm under the excitation of the ultraviolet light of a determined wavelength at room temperature.It has been found that the polymer exhibits a weaker antiferromag-netic interaction (J=-2.cm-1,εff=1.68 B.M.) with an apparent spin S<1/2 in the ground state and its conductivity 298K is 1.01×10-5 S-cm-1 at 13.73 MPa.     

A novel terbium complex using oxadiazole derivative as a neutral ligand： Synthesis and properties

A novel terbium complex using 1,3,4-oxadiazole derivative as a neutral ligand was synthesized and characterized. Its thermal stability and photoluminescent properties were studied. The strong emission peaked at 546 nm with a full width at half maximum of 5 nm was observed in the pure terbium complex film under excitation of 328 nm light, which is attributed to the characteristic emission of terbium ion. The good thermal stability and intense sharp emission of this terbium complex display its potential application in electroluminescence devices.     

A study on the structural transition of a single polymer chain by parallel tempering molecular dynamics simulation

The structural transition of a single polymer chain with chain length of 100,200 and 300 beads was investigated by parallel tempering MD simulation.Our simulation results can capture the structural change from random coil to orientationally ordered structure with decreasing temperature.The clear transition was observed on the curves of radius of gyration and global orientational order parameter P as the function of temperature,which demonstrated structural formation of a single polymer chain.The linear relationships between three components of square radius of gyration R_gx²,R_gx²,R_gz² and global orientational order P can be obtained under the structurally transformational process.The slope of the linear relationship between x（or y-axis） component R_gx²(or R_gy²) and P is negative,while that of RL as the function of P is positive.The absolute value of slope is proportional to the chain length.Once the single polymer chain takes the random coil or ordered configuration,the linear relationship is invalid.The conformational change was also analyzed on microscopic scale.The polymer chain can be treated as the construction of rigid stems connecting by flexible loops.The deviation from exponentially decreased behavior of stem length distribution becomes prominent,indicating a stiffening of the chain arises leading to more and more segments ending up in the trans state with decreasing temperature.The stem length N_tr is about 21 bonds indicating the polymer chain is ordered with the specific fold length.So,the simulation results,which show the prototype of a liquid-crystalline polymer chain,are helpful to understand the crystallization process of crystalline polymers.     

Synthesis and characterization of a new green‐emitting poly(phenylenevinylene) derivative containing alkylsilylphenyl pendant

A new type of processable green‐emissive polymer containing alkylsilylphenyl units was synthesized via Gilch polymerization. The resulting polymer was soluble in organic solvents and was spin‐cast to make a thin film. A light‐emitting diode was fabricated by the polymer being sandwiched between indium tin oxide and metal electrodes. A strong green emission at 524 nm was observed from the various device configurations made by the newly synthesized polymer. The polymer had a strong absorption band around 427 nm that was attributable to a π–π* transition of the conjugated segments of the polymer. A current–voltage–luminance curve showed typical rectifying diode characteristics. The polymer had a very high molecular weight (number‐average molecular weight = ∼300,000) with a polydispersity of about 3 and good thermal stability up to 400 °C. The brightness at 13 and 17 V was about 1000 and 5900 cd/m², respectively. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4185–4193, 2000     

Carbazolevinylene‐based polymers and model compounds with oxadiazole and triphenylamine segments: Synthesis,photophysics, and electroluminescence

Two new soluble alternating carbazolevinylene‐based polymers POXD and PTPA as well as the corresponding model compounds MOXD and MTPA were synthesized by Heck coupling. POXD and MOXD contained 2,5‐diphenyloxadiazole segments, while PTPA and MTPA contained triphenylamine segments. All samples displayed high thermal stability. The polymers had higher glass transition temperature (T_g) than their corresponding model compounds. The samples showed absorption maximum at 364–403 nm with optical band gap of 2.62–2.82 eV. They emitted blue‐green light with photoluminescence (PL) emission maximum at 450–501 nm and PL quantum yields in THF solution of 0.15–0.36. The absorption and the PL emission maxima of PTPA and MTPA were blue‐shifted as compared to those of POXD and MOXD . The electroluminescence (EL) spectra of multilayered devices made using four materials exhibited bluish green emissions, which is well consistent with PL spectra. The EL devices made using poly(vinyl carbazole) doped with MOXD and MTPA as emitting materials showed luminances of 12.1 and 4.8 cd m^?2. POXD and PTPA exhibited 25.4, and 96.3 cd m^?2, respectively. The polymer containing the corresponding molecules in the repeating group showed much higher device performances. Additionally, POXD and MOXD exhibited better stability of external quantum efficiency (EQE) and luminous efficiency with current density resulting from enhancing the electron transporting properties. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5592–5603, 2008     

Ultraviolet derivative absorption spectra of nylon 6,6: Effect of photolysis versus photo-induced oxidation

The irradiation of nylon 6,6 film with light of wavelengths greater than 250 nm and 300 nm has been studied using uv derivative absorption spectroscopy. Initially, the polymer showed a strong absorption at 290 nm which is associated with an α,β-unsaturated carbonyl species. Changes in the absorption band were found to be dependent on the atmosphere and are discussed in terms of a reversible photolysis versus a photo-induced oxidation process.     

Synthesis and characterization of a soluble blue light emitting alternating copolymer

An alternating copolymer with monomer units of fluorene and phenylenedivinylene was synthesized by reaction between n-hexyl fluorene phosphonium salt and isophthalic aldehyde based on the Wittig reaction. The polymer solution in chloroform was made into a film with a very fine surface by spin-casting on indium-tin oxide (ITO) coated glass to fabricate a light emitting diode (LED) with an aluminum negative electrode. The optical absorption spectrum of the solid film shows a peak at 370 ran while the PL spectrum has the main peak at 560 nm with a secondary peak at 440 nm and the EL spectrum has a single peak at 560 nm showing the Stokes shift of 190 nm. The peak in the PL spectrum shifts to 420 nm with a vibronic structure at 440 nm on either dilution by chloroform or blending with polyvinylcarbazole (PVK). The emissive polymer bulk seemed to generate sites for excimers and molecular aggregates which were diminished on the dilution or blending. The peak in the EL spectrum also shifts to 440 nm on blending of 20% of the copolymer with PVK. Further dilution to 10% of the copolymer shifts the EL peak to 420 nm with the onset potential of 15 V and the highest quantum efficiency of 0.01% in this series. The concentrated channels were developed in the blends with severe phase separation to show a lower onset potential but poor quantum efficiency.     

A solution‐processible poly(p‐phenylene vinylene) without alkyl substitution: Introducing the cis‐vinylene segments in polymer chain for improved solubility,blue emission,and high efficiency

A soluble all‐aromatic poly(2,5‐diphenyl‐1,4‐phenylenevinylene) (2,5‐DP‐PPV) is synthesized by utilizing aromatic phosphonium and aldehyde monomers through Wittig reaction. The H¹ NMR and FTIR measurements indicate that over 50% content of cis‐vinylene units exist in polymer backbone. The diphenyl‐substituted benzaldehyde monomer plays an important role to enhance cis‐products (Z‐selectivity) in Wittig reactions. The twisted cis‐segments in polymer backbone reduce the interchain interactions and enhance the solubility of such all‐aromatic PPV derivative in common organic solvents. 2,5‐DP‐PPV exhibits good solubility in common organic solvents, such as tetrahydrofuran and chloroform. The polymer film exhibits a blue light emission (λ_max = 485 nm) and a very high photoluminescence efficiency of 78%. The cis‐trans photo isomerization of this polymer in solution and the impact on the optical properties are also investigated. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5242–5250, 2008     

蒽端基聚对苯亚乙炔的发光性能

报道了一种新的蒽端基聚对苯亚乙炔的合成与发光特性,分别考察了聚合物 P2的紫外吸收,荧光发射和电致发光光谱。结果表明,在聚对苯亚乙炔主链末端引 入蒽基团可改变其有效共轭长长及发光颜色,合成的模型小分子可证明这一点。电 致发光器件ITO/P2/Al在600 nm处发红光。     

可溶性聚3-[(二茂铁甲酸乙酯)三乙氧基]氧基噻吩的合成与性质表征

采用化学聚合方法合成了一种含二茂铁电活性基团的新型导电聚噻吩衍生物聚3-[(二茂铁甲酸乙酯)三乙氧基]氧基噻吩, 用1H NMR和红外光谱等方法对其结构进行了表征. 实验结果表明, 该聚合物可溶于三氯甲烷、四氢呋喃和丙酮等有机溶剂, 并且二茂铁在聚合物中依然保持良好的氧化还原活性, 对钠离子具有良好的选择性络合作用.     

The Electroluminescence Characterization of Poly(p-phenyleneethynylene)——The π-conjugated Backbone Interrupted by a Butylene Unit

IntroductionSince the firstreport in1 990 of the electro- lu-minescence of the conjugated polymers in the filmof poly(p- phenylenevinylene) sandwiched betweenan anode and a cathode of appropriate work func-tions[1] ,enormous efforts have been devoted to thesynthesis of light emitting polymers[2— 4 ] .Owing toconjugated polymers′ photoluminescence and elec-troluminescence having been found out,their im-portant properties,polymer processability,bandgap tunability and mechanical flexibility mak…     

Hydrogen-hydrogen bonding in planar biphenyl, predicted by atoms-in-molecules theory, does not exist

Based on an Atoms-in-Molecules (AIM) analysis, Matta et al. recently claimed evidence for the existence of hydrogen-hydrogen bonding between ortho-hydrogen atoms, pointing towards each other from adjacent phenyl groups in planar biphenyl. This AIM result is opposed to the classical view that nonbonded steric repulsion between the ortho-hydrogen atoms is responsible for the higher energy of the planar as compared to the twisted geometry of biphenyl. In the present work, we address the question if hydrogen-hydrogen bonding in biphenyl exists, as suggested by AIM, or not. To this end, we have analyzed the potential energy surface for internal rotation of biphenyl in terms of two interacting phenyl radicals using density functional theory (DFT) at BP86/TZ2P. A detailed analysis of the bonding mechanism and a quantitative bond energy decomposition in the framework of Kohn-Sham DFT show that Pauli (or overlap) repulsion, mainly between C(ortho)--H(ortho) phenyl MOs, prevents biphenyl from being planar and forces it to adopt a twisted equilibrium geometry. Furthermore, a derivative of biphenyl in which all four ortho-hydrogen atoms have been removed does adopt a planar equilibrium geometry. Thus, our results confirm the classical view of steric repulsion between ortho-hydrogen atoms in biphenyl and they falsify the hypothesis of hydrogen-hydrogen bonding.     

Synthesis and properties of novel poly(p-phenylenevinylene) copolymers for near-infrared emitting diodes

A series of novel near-infrared (NIR) electroluminescence (EL) copolymers based on a host poly(p-phenylenevinylene) (PPV) derivative of poly(2-methoxy-5-octyloxy-p-phenylenevinylene) (PMOPV) with different content of narrow band-gap (NBG) unit 4,7-bis(2-thienyl)-2,1,3-benzothiadiazolevinylene (DBTV) or 4,7-bis(2-thienyl)-2,1,3-benzoselenadiazolevinylene (TBSV) was prepared by Stille coupling reaction. All the copolymers are soluble in common organic solvents, most of which emit NIR light accompanied by gradually red-shifting with increasing the content of the NBG units. The peak EL emission of the copolymers with around 30% TBSV content is at about 800 nm.