Acoustic radiation from a shell-encapsulated baffled cylindrical cap

An exact study of radiation of an acoustic field due to radial/axial vibrations of a baffled cylindrical piston, eccentrically positioned within a fluid-filled thin cylindrical elastic shell, into an external fluid medium is presented. This configuration, which is a realistic idealization of a liquid-filled cylindrical acoustic lens with a focal point inside the lens when used as a sound projector, is of practical importance with a multitude of possible applications in underwater acoustics and ocean engineering. The formulation utilizes the appropriate wave field expansions along with the translational addition theorems for cylindrical wave functions to develop a closed-form solution in the form of an infinite series. Numerical results reveal the key effects of excitation frequency, cap angle, radiator position (eccentricity), dynamics of the elastic shell, and cap surface velocity distribution on sound radiation.     

径向声子晶体隔声特性*

该文构造了由两种匀质材料交替分布的径向声子晶体柱壳模型。首先,针对声波在其中的轴对称传播情况进行了理论分析,建立了声波由内向外传播的传递矩阵,进而导出了声压透射系数和隔声量表达式。采用数值分析的方法系统地讨论了径向声子晶体柱壳的隔声特性,并与单一材质柱壳的传播规律进行对比分析,其次,借助有限元仿真分析的手段对数值结果进行了验证。最后,详细分析了内外流体的特性阻抗对径向声子晶体柱壳隔声特性的影响,得到了相应的参数影响规律。研究表明,径向声子晶体柱壳存在声波带隙,导致其在带隙范围内的隔声效果远远优于单材质柱壳,并且该结构的固有特性突破了质量定律的限制;声波带隙内表面局域态现象出现与否由内外声场和结构场共同决定。     

内部体积源作用下的圆柱壳内外声场特性

圆柱壳内各型体积源辐射噪声特性研究是声场建模和声场预报的前提.为了研究具有指向性的大尺度体积源特性对水下航行器结构内外声场的影响,本文结合薄壳理论、等效源和柱腔Green函数构造了体积源激励下的壳体振动耦合方程,研究了体积源表面声散射作用和指向性强弱对圆柱壳内外声场的影响.数值计算结果表明,体积源构造的准确性与其等效源位置有关,等效源配置在体积源几何中心与其结构表面之间0.4—0.6时,可以提高声场计算结果的准确性;大尺度体积源表面的声散射作用会导致壳体内部声场结构发生改变,内声场声腔共振峰发生偏移,并且在部分频段引起较强的声透射现象;此外,体积源指向性变化对壳体内外声场强弱影响较小,其显著作用表现在改变了外辐射声场的远场指向性.该研究结果对噪声预报和控制有一定的参考价值.     

传递矩阵法预报时空随机激励下任意薄壳腔体内部噪声

利用结构有限元结合声有限元及边界元方法,建立了任意薄壳腔体弹性壳板振动与内外声场的耦合模型,并计算了激励力与壳板振动和内部声场之间的传递矩阵;湍流边界层脉动压力具有时空随机面激励特性,引入整体形状函数矩阵,进一步推导弹性壳板广义节点力功率谱密度函数矩阵与随机面分布激励力功率谱密度函数的关系,再利用声振耦合传递矩阵,得到弹性壳板振动和内部声场功率谱密度函数与广义节点力功率谱密度函数矩阵的关系,形成随机分布激励下任意薄壳腔体结构振动及内部声场的计算方法。以典型的内外均有声介质且一面为弹性矩形板的矩形腔声振耦合模型为例,计算了弹性壳板振动和内部声场功率谱密度函数,并与解析方法进行了比较,两者基本吻合,偏差分别为1 dB和2 dB左右。传递矩阵法不受腔体结构及其内部区域形状的制约,具有良好的适用性。      

Acoustic signature of a submarine hull under harmonic excitation

The structural and acoustic responses of a submarine under harmonic force excitation are presented. The submarine hull is modelled as a cylindrical shell with internal bulkheads and ring stiffeners. The cylindrical shell is closed by truncated conical shells, which in turn are closed at each end using circular plates. The entire structure is submerged in a heavy fluid medium. The structural responses of the submerged vessel are calculated by solving the cylindrical shell equations of motion using a wave approach and the conical shell equations with a power series solution. The far-field radiated sound pressure is then calculated by means of the Helmholtz integral. The contribution of the conical end closures on the radiated sound pressure for the lowest circumferential mode numbers is clearly observed. Results from the analytical model are compared with computational results from a fully coupled finite element/boundary element model.     

Structural and acoustic responses of a fluid-loaded cylindrical hull with structural discontinuities

This paper studies the low frequency vibrational behaviour and radiated sound of a submarine hull under axial excitation. The submarine is modelled as a fluid-loaded cylindrical shell with internal bulkheads and ring-stiffeners and closed at each end by circular plates. A smeared approach is used to model the ring stiffeners. The external pressure acting on the hull due to the fluid loading is calculated using an infinite model and is shown to be a good approximation at low frequencies. The radiated sound pressure is obtained by considering the finite cylindrical hull to be extended by two semi-infinite rigid baffles. The sound pressure is then only due to the radial displacement of the cylindrical shell, without taking into account the scattering at the finite ends. The main aim of this paper is to observe the influence of the various complicating effects such as the bulkheads, ring-stiffeners and fluid loading on the structural and acoustic responses of the finite cylindrical shell. Results from the analytical models presented in this paper are compared to the computational results from finite element and boundary element models.     

环筋对水下平底圆柱壳的声振特性影响

本文建立了计算两端带平底板的有限长圆柱壳水中声辐射的FEM／BEM三维模型，探索了加筋的高度、宽度、数目对平底圆柱壳的辐射功率、辐射效率、法向声强、声场指向性的影响规律。计算方法是在有限元软件ANSYS中做加筋平底圆柱壳建模、模态分析基础上，将有关数据（网格、模态）导入边界元软件SYSNOISE中计算流体结构耦合状态下的辐射声场特性。结果表明：（1）随着环筋高度、宽度增大，激励点声压峰和法向声强峰在0-400Hz频率范围内数目减少且峰向高频方向移动，同时辐射声功率在减小（除个别模态峰值外），而辐射效率随筋高增大而增大。（2）环筋数目的增加使激励点辐射声压和法向声强峰数目明显减少，使辐射声功率明显低于无筋圆柱壳的辐射声功率，辐射效率随环筋数目增大而增大。（3）环筋宽度变化对声场指向性影响不大；圆柱壳声场指向性随环筋高度和数目增加出现较大变化，尤其是在研究的频段内的f=51Hz和f=301Hz上。这对于水下结构辐射噪声预报以及噪声抑制具有重要意义。     

Radiation from finite cylindrical shell with irregular-shaped acoustic enclosure

In practical situations, large machinery is usually placed in an underwater vessel and changes the acoustic enclosure shape into an irregular one. The existence of machinery causes the difficulties in expressing sound transmission and radiation analytically. In this study, the sound radiation of a cylindrical shell excited by an internal acoustic source is modeled and analyzed. The cylindrical shell contains a machine modeled as a rectangular object, which is attached to a shell with a spring-mass system. The acoustic field of the cavity is computed by the integro-modal approach. The effect of object size on the coupling between acoustic mode and structural mode is investigated. The relationship between object volume and sound radiation is also studied. Numerical results show that the existence of objects inside vessels leads to a more effective coupling between the structure and acoustic enclosure than the existence of no objects in a regular-shaped cavity(i.e. empty vessel).     

Acoustic field in a closed layered shell with resonant systems

The acoustic field inside a shell excited by a spatially inhomogeneous harmonic pressure field is studied. The shell is assumed to have a finite length, a set of orthogonal stiffening ribs, two ends bounding the acoustic volume, and a sound-insulating structure, which includes layers of sound-insulating material, resonant elements, and an interior panel. The shell is considered to be orthotropic with boundary conditions corresponding to a free support. For the acoustic field in the closed volume, analytical expressions are derived with allowance for the elastoacoustic interaction of the shell with the sound-insulating layers and with the medium both inside the shell (with arbitrary impedance values at the ends) and outside it. These expressions are used to investigate the effect of different types of resonant systems on the sound field inside the shell.     

Active control of low-frequency sound radiation by cylindrical shell with piezoelectric stack force actuators

A novel active control method of sound radiation from a cylindrical shell under axial excitations is proposed and theoretically analyzed. This control method is based on a pair of piezoelectric stack force actuators which are installed on the shell and parallel to the axial direction. The actuators are driven in phase and generate the same forces to control the vibration and the sound radiation of the cylindrical shell. The model considered is a fluid-loaded finite stiffened cylindrical shell with rigid end-caps and only low-frequency axial vibration modes are involved. Numerical simulations are performed to explore the required control forces and the optimal mounting positions of actuators under different cost functions. The results show that the proposed force actuators can reduce the radiated sound pressure of low-frequency axial modes in all directions.     

Active control of sound radiated by a submarine in bending vibration

This paper theoretically investigates the use of inertial actuators to reduce the sound radiated by a submarine hull in bending vibration under harmonic excitation from the propeller. The radial forces from the propeller are tonal at the blade passing frequency and are transmitted to the hull through the stern end cone. The hull is modelled as a fluid loaded cylindrical shell with ring stiffeners and two equally spaced bulkheads. The cylinder is closed by end-plates and conical end caps. The actuators are arranged in circumferential arrays and attached to the prow end cone. Both Active Vibration Control and Active Structural Acoustic Control are analysed. The inertial actuators can provide control forces with a magnitude large enough to reduce the sound radiated by the vibrations of the hull in some frequency ranges.     

The prediction of sound fields inside non-diffuse spaces: Transmission loss considerations

The prediction of sound levels inside internally complex enclosures is extended to include transmission through walls. The sound field is estimated from the spatial variation of phonon density which is calculated by using a random walk technique. This statistical geometrical method also includes consideration of air attenuation and specular reflection of sound from walls whose individual random incidence absorption coefficients are individually known. Solutions agree with experimental results obtained in models, to within, on average, 4 dB.     

Acoustic characteristics inside cylindrical structure with end plates excited at different frequencies

In order to study coupling between vibration of a structure and a sound field in contact with the structure, a cavity surrounded by a rigid cylinder having thin elastic plates at both ends is adopted as an analytical model. When excitation forces of different frequencies are applied to the respective plates, the plate vibrations and the sound field inside the cavity become aperiodic, because of the coupling between the systems. In the present investigation, distribution of the sound pressure level inside the cavity is studied in detail in order to clarify the coupling behavior. The results show that when the respective plates vibrate at the same circumferential order, the vibration modes of the plates, which effect the coupling of the plate vibrations and the sound field, cause the aperiodic nature of each system to develop. In this case, since the dominant mode exists in formation of the sound field, it significantly influences the aperiodic nature of the coupling systems. In the case of vibration modes where the plates vibrate at different circumferential orders, the behaviors of the three systems, whose coupling has been restrained, approximate a steady state. Consequently, the dominant mode does not appear in the sound field.     

Sound field of a baffled sound source covered by an anisotropic rigid-porous material

A theoretical approach for the sound field of a piston sound source covered by a finite thickness layer of anisotropic rigid-porous material is presented. The formulation is an extension of the method worked out by Amedin et al. [Sound field of a baffled piston source covered by a porous medium layer. J Acoust Soc Am 1995;98(3):1757]. First, in the present study the sound field of a point source is described by cylindrical waves. Then, with the proper boundary conditions, the sound pressure radiated from a piston source covered by a layer of anisotropic porous material can be calculated. The effects of frequency and bulk density of material on the sound propagation in an anisotropic porous material are studied. Finally, the effect of anisotropy is discussed.     

三弹性圆柱壳体多重耦合声辐射计算方法

为研究多圆柱壳组合结构的声辐射特性,采用模态叠加法建立了3个并排无限长弹性圆柱壳的振动声散射耦合物理模型,充分考虑了三圆柱壳的表面振动与散射声场的耦合,其中散射声场可分解为各圆柱壳刚性散射声场和弹性辐射声场的叠加,数学上将各壳间的声场耦合关系通过柱函数加法公式描述。利用该物理模型,分析了多重散射对稳态声场求解结果的影响,比较了三圆柱壳耦合系统与单个圆柱壳系统的辐射声场指向性、声压级及辐射声功率级的差异及其产生机理,结果表明:结构弹性耦合声辐射不仅在低频对总声场有显著影响,在高频范围也不可忽略;另外,针对本文设定参数的组合圆柱壳,在150 Hz以上频段,两旁圆柱壳对中间圆柱壳在正横方位产生了声辐射遮蔽效应,垂直方位则体现声泄漏作用。本文建立的方法可推广到三维空间任意多壳结构的声振耦合建模。      

Sound transmission through layered cylindrical shells with applied damping treatment

Sound transmission through closed circular cylindrical shells with unconstrained damping treatment and sandwich shells with constrained damping treatment is considered in an acoustoelastic formulation in which the full interaction between the structural vibration and the internal cavity pressure field are taken into account. Only the axisymmetric modes of vibration of the shell are considered in an initial formulation. The structural response and the sound transmission characteristics for an external random pressure field are computed through an efficient matrix inversion procedure. Results indicate insensitivity of noise reduction and structural response to variations in core parameters of the sandwich shell. The sandwich shell has better noise transmission characteristics in the higher frequency ranges as compared to an equivalent layered shell with unconstrained damping treatment.     

Parametric generation of short acoustic pulses

A method of parametric generation of short sound pulses with controllable duration upon excitation of steady-state vibrations of the acoustic field in the resonator under conditions of modulation of the amplitude of high-frequency variations in the speed of sound in a resonator material was proposed and theoretically studied.     

Dynamic analysis of ring-stiffened circular cylindrical shells

A numerical method is developed for the dynamic analysis of ring-stiffened circular cylindrical thin elastic shells. Only circular symmetric vibrations of the shell segments and radial and torsional vibrations of the rings are considered. The geometric and material properties of the shell segments and the rings may vary from segment to segment. Free vibrations or forced vibrations due to harmonic pressure loading are treated with the aid of dynamic stiffness influence coefficients for shell segments and rings. Forced vibrations due to transient pressure loading are treated with the aid of dynamic stiffness influence coefficients for shell segments and rings defined in the Laplace transform domain. The time domain response is then obtained by a numerical inversion of the transformed solution. The effect of external viscous or internal viscoelastic damping is also investigated by the proposed method. In all the cases, the dynamic problem is reduced to a static-like form and the “exact” solution of the problem is numerically obtained.     

Sound propagation above an inhomogeneous plane: Boundary integral equation methods

A boundary integral equation method is used to compute the sound pressure emitted by a harmonic source above an inhomogeneous plane. First, the theoretical aspects of the problem (behaviour of the pressure around the discontinuities,…) are studied. Then, a comparison between theoretical levels and experimental levels obtained in an anechoic room is presented. It shows that the boundary integral equation (BIE) method is quite convenient for solving this kind of problem. Two interesting results are pointed out: (i) if only a prediction of maximum sound levels is needed, the attenuation is the same for a cylindrical source, a spherical source and N spherical sources, and so it is possible to transform some three-dimensional problems into two-dimensional ones; (ii) a numerical method of computation of the sound field above an inhomogeneous plane does not provide a correct prediction if each part of the plane is not accurately described by the boundary condition chosen.     

部分浸没圆柱壳声固耦合计算的半解析法研究

部分浸没圆柱壳-流场耦合系统的声振分析是一种典型的半空间域内声固耦合问题,其振动及声学计算目前主要依赖于数值方法求解,但无论从检验数值法还是从机理上揭示其声固耦合特性,解析或半解析方法的发展都是不可或缺的.本文提出了一种半解析方法,先将声场坐标系建立在自由液面上,采用正弦三角级数来满足自由液面上的声压释放边界条件;接着基于二维Flügge薄壳理论建立了以圆柱圆心为坐标原点的壳-液耦合系统的控制方程;然后再利用Galerkin法处理声固耦合界面的速度连续条件,推导得到声压幅值与壳体位移幅值之间的关系矩阵并求解该耦合系统的振动和水下声辐射.与有限元软件Comsol进行了耦合系统自由、受迫振动和水下辐射噪声计算结的对比分析,表明本文方法准确可靠.本文的研究为解析求解弹性结构与声场部分耦合的声振问题提供了新的思路.