Effect of hydrogenation on the spectra of electronic and vibrational transitions in single-walled carbon nanotubes

Single-walled carbon nanotubes containing 5.4 wt% H are prepared under a hydrogen pressure of 50 kbar at the temperature T = 500°C. Analysis of the optical transmission spectra has revealed that the hydrogenation of single-walled carbon nanotubes brings about suppression of high-frequency conduction provided by free charge carriers in the nanotubes, the disappearance of interband electronic transitions, and the appearance of an absorption line at 2845 cm^?1 corresponding to stretching vibrations of the C-H bonds. The removal of hydrogen from hydrogenated single-walled carbon nanotubes owing to vacuum annealing at a temperature of 500°C is accompanied by a linear decrease in the intensity of this line as the hydrogen content in the system decreases. This phenomenon indicates that the greater part of the hydrogen atoms in single-walled carbon nanotubes are covalently bonded to the carbon atoms.     

Brightening of triplet dark excitons by atomic hydrogen adsorption in single-walled carbon nanotubes observed by photoluminescence spectroscopy

Adsorption and desorption of atomic hydrogen on single-walled carbon nanotubes were observed by photoluminescence spectroscopy. A satellite peak appeared at the lower energy side of the E11 photoluminescence emission peak after exposure to atomic hydrogen and then disappeared after annealing at 300?°C in vacuum. The energy difference between the satellite peak and E11 peak was 40-80 meV, depending on the tube diameter. The satellite peak was attributed to the triplet dark exciton that became optically active because of the effectively enhanced spin-orbit interaction induced by adsorbed hydrogen atoms.     

A model of the multiple adsorption of hydrogen atoms on the surface of carbon nanotubes

A model of the multiple adsorption of atomic hydrogen on the surface of single-walled carbon nanotubes of the zigzag and arm-chair types was constructed. The adsorption model is based on the Anderson periodic model. An analytic equation for the band structure of carbon nanotubes with adsorbed hydrogen atoms was obtained, and the special features of this structure were studied. The dependence of the band structure of carbon nanotubes on the concentration of adsorbed hydrogen atoms was analyzed. The model constructed can be used to study adsorption of other univalent atoms on the surface of carbon particles.     

Effect of atomic hydrogen adsorption on the transport characteristics of semiconducting carbon nanotubes

The effect of atomic hydrogen adsorption on the conduction and diffusion properties of carbon nanotubes of zigzag type in an external electric field is considered. The model of adsorption of atomic hydrogen on the surface of single-walled carbon nanotubes of zigzag type is based on the single-impurity periodic Anderson model. The theoretical calculation of the diffusion coefficient and electrical conductivity of carbon nanotubes of zigzag type doped with hydrogen atoms is carried out in the relaxation time approximation. It has been revealed that the electrical conductivity and electron diffusion coefficient decrease with increasing concentration of adsorbed hydrogen atoms. It has been shown that the dependence of the electrical conductivity and the diffusion coefficient on the amplitude of the constant electric field at the constant concentration of hydrogen adatoms is nonlinear.     

Thermally stable hydrogen compounds obtained under high pressure on the basis of carbon nanotubes and nanofibers

Compounds containing 6.3–6.5 wt % H and thermally stable in vacuum up to 500°C were obtained by annealing graphite nanofibers and single-walled carbon nanotubes in hydrogen atmosphere under a pressure of 9 GPa at temperatures up to 45°C. A change in the X-ray diffraction patterns indicates that the crystal lattice of graphite nanofibers swells upon hydrogenation and that the structure is recovered after the removal of hydrogen. It was established by IR spectroscopy that hydrogenation enhances light transmission by nanomaterials in the energy range studied (400–5000 cm^?1) and results in the appearance of absorption bands at 2860–2920 cm^?1 that are characteristic of the C–H stretching vibrations. The removal of about 40% of hydrogen absorbed under pressure fully suppresses the C–H vibrational peaks. The experimental results are evidence of two hydrogen states in the materials at room temperature; a noticeable portion of hydrogen forms C–H bonds, but the most of the hydrogen is situated between the graphene layers or inside the nanotubes.     

The effect of hydrogen and oxygen atoms on the adsorbed gallium inside defective carbon nanotubes

The adsorption of single gallium atoms on the inner walls of single-walled carbon nanotubes with hydrogen/oxygen-saturated monovacancies are studied by using the density functional theory method. When the monovacancy is saturated by the hydrogen or oxygen atom, the gallium atom prefers to adsorb on the top of the center of a pentagon ring, and the binding energy between the gallium atom and carbon nanotube is significantly lower as compared to the case with a pure monovacancy. In addition, the results of the density of states show that the states originating from the adsorbed gallium atoms shift toward lower energy when the carbon atoms with dangling bonds are saturated by hydrogen or oxygen atoms. Meanwhile, these states have no contribution to the states near the Fermi levels.     

Sidewall fluorination and hydrogenation of single-walled carbon nanotubes: a density functional theory study

The fluorination and hydrogenation reactions on (6, 6) and (10, 0) single-walled carbon nanotubes (SWCNTs) have been examined via computing the reaction energy for the chemisorption. The examined nanotubes have comparable lengths and diameters, with or without Stone-Wales defects on the sidewall. The two fluorine or hydrogen atoms are anchored to the external walls of the SWCNTs. The computed chemisorption energies of these virtual reactions reveal that the fluorination and hydrogenation of the nanotubes are moderately sensitive to the nanotube chirality and the sidewall topology, and the (10, 0) SWCNT with Stone-Wales defect can be easily fluorinated and hydrogenated.      

Comparison of metallic silver and copper doping effects on single-walled carbon nanotubes

In this work we performed the filling of single-walled carbon nanotube channels with metallic silver and copper by means of two-step synthesis including imbuing with metal nitrate aqueous solution and further annealing. It has been shown that metal insertion into the nanotube cavities results in the Fermi level upshift and the charge transfer from metal to carbon atoms, thus donor doping of single-walled carbon nanotubes takes place. At the same time, encapsulated silver has a larger donor effect on the carbon nanotubes that has been proved by Raman spectroscopy and X-ray photoelectron spectroscopy.     

Comparative X-ray absorption investigation of fluorinated single-walled carbon nanotubes

The C 1s and F 1s X-ray absorption spectra of pristine and fluorinated single-walled carbon nanotubes with different fluorine contents and nanodiamond as a reference compound have been measured with the aim of characterizing single-walled carbon nanotubes and their products formed upon treatment of the nanotubes with molecular fluorine at a temperature of 190°C. The spectra obtained have been analyzed by thoroughly comparing with the previously measured spectra of highly oriented pyrolytic graphite and fluorinated multiwalled carbon nanotubes and the spectrum of nanodiamond. It has been established that the fluorination of single-walled and multiwalled carbon nanotubes leads to similar results and is characterized by the attachment of fluorine atoms to carbon atoms on the lateral surface of the nanotube with the formation of the σ(C-F) bonds due to the covalent mixing of F 2p and C 2p _z π valence electron states.     

Atomic arrangement of iodine atoms inside single-walled carbon nanotubes

We report atomic resolution Z-contrast scanning transmission electron microscopy images that reveal the incorporation of I atoms in the form of helical chains inside single-walled carbon nanotubes. Density functional calculations and topological considerations provide a consistent interpretation of the experimental data. Charge transfer between the nanotube walls and the I chains is associated with the intercalation.     

Anti-prismatic modifications of single-walled carbon nanotubes and their electronic properties: Regular adsorption of fluorine atoms on graphene surfaces of nanotubes

The regular adsorption of fluorine atoms on the surfaces of single-walled carbon nanotubes along their cylindrical axes leads to a modification of cylindrical carbon skeletons of these single-walled carbon nanotubes into carbon skeletons that have a nearly “anti-prismatic” shape (anti-prismatic modifications). In the faces of these modified single-walled carbon nanotubes, there can arise quasi-one-dimensional isolated carbon conjugated subsystems (tracks) with different structures. Model fragments of nanotubes of the (n, 0) type that contain up to 360 carbon atoms and their derivatives with regularly adsorbed fluorine atoms on the graphene surface have been calculated using the semiempirical PM3 method. It has been found that the main properties of the single-walled carbon nanotubes modified by the above method are determined by the character of the conjugation of the electrons in isolated carbon tracks, which is close to the character of the conjugation of the electrons in the initial single-walled carbon nanotubes.     

Channeling of fast ions through the bent carbon nanotubes:The extended two-fluid hydrodynamic model

We investigate the interactions of charged particles with straight and bent single-walled carbon nanotubes(SWNTs)under channeling conditions in the presence of dynamic polarization of the valence electrons in carbon. This polarization is described by a cylindrical, two-fluid hydrodynamic model with the parameters taken from the recent modelling of several independent experiments on electron energy loss spectroscopy of carbon nano-structures. We use the hydrodynamic model to calculate the image potential for protons moving through four types of SWNTs at a speed of 3 atomic units. The image potential is then combined with the Doyle–Turner atomic potential to obtain the total potential in the bent carbon nanotubes.Using that potential, we also compute the spatial and angular distributions of protons channeled through the bent carbon nanotubes, and compare the results with the distributions obtained without taking into account the image potential.     

Effect of electrochemical treatment on structural properties of conical carbon nanotubes

Interaction of multiwalled conical carbon nanotubes (CNTs) with hydrogen during their electrochemical treatment was studied by galvanostatic measurements and Raman spectroscopy. The structural changes occurring in the conical walls of the CNTs in consequence of the hydrogenation were investigated by using X-ray diffraction (XRD). The results obtained show that hydrogen sorption by conical CNTs is reversible. XRD studies revealed that the electrochemical hydrogenation leads to a change in the diffraction peak profile (2θ=26^°) and its position corresponding to the interplanar distance in conical CNTs. The results indicate structural changes occurring in the conical walls of the CNTs during hydrogenation. We assume that these structural changes can be caused by the hydrogen intercalation into the interplanar spaces of conical CNTs. Thus, the charge/discharge and structure data can be explained by the existence in this system of physically adsorbed molecular hydrogen and chemically bound atomic hydrogen.     

Prismatic modifications of single-walled carbon nanotubes and their electronic properties: Regular adsorption of fluorine atoms on graphene surfaces of nanotubes

The regular adsorption of fluorine atoms on surfaces of single-walled carbon nanotubes along their axes can lead to a modification of cylindrical carbon cores of these single-walled carbon nanotubes to carbon cores that have a nearly prismatic shape (prismatic modification). In faces of these modified single-walled carbon nanotubes, there can arise quasi-one-dimensional isolated carbon conjugated subsystems (tracks) with different structures. It has been established that the main characteristics of the single-walled carbon nanotubes thus modified are rather close to the corresponding characteristics of the related isostructural polymer conjugated systems (such as cis-polyenes, polyphenylenes, poly(periacenes), or polyphenantrenes). Fragments of model nanotubes of the (n, n) and (n, 0) types that contain up to 360 carbon atoms and their derivatives doped with fluorine atoms have been calculated using the semiempirical parametric method 3.     

单壁碳纳米管杨氏模量的掺杂效应

用分子动力学方法研究了N,O,Si,P,S等5种杂质对扶手椅型(5，5)和锯齿型(9，0)单壁碳纳米管杨氏模量的影响.结果表明：直径为0.678和0.704 nm的扶手椅型(5，5)和锯齿型(9，0)碳纳米管在无掺杂时其杨氏模量分别为948和804 GPa.在掺杂浓度10％以下，碳纳米管的拉伸杨氏模量均随掺杂浓度增加近似呈线性下降规律，下降率以Si掺杂最大，N掺杂最小.对与C同周期的元素掺杂，随原子序数增加碳纳米管的杨氏模量下降率增大；与C不同周期的元素掺杂，碳纳米管的杨氏模量随掺杂浓度增加下降率更大，但 关键词： 碳纳米管 杂质 杨氏模量 分子动力学方法     

Microwave-assisted functionalization of single-walled carbon nanotubes with 3-chloropropene

We have reported a highly efficient approach to functionalize single-walled carbon nanotubes by electrophilic addition polymerization of 3-chloropropene under microwave irradiation. Using Lewis acids as catalysts, 3-chloropropene can undergo polymerization followed by hydrolysis with alkaline methanol, and thus the reaction results in the attachment of polymer chains and hydroxyl groups to the surface of the nanotubes. The resulting nanotubes were characterized with Fourier transform infrared spectroscopy, thermogravimetric analysis, Raman spectroscopy, high-resolution transmission electron microscopy, and atomic force microscopy. The result shows that 30 min of irradiation time is enough to bring the reaction to the end and a longer time did not improve the degree of functionalization.     

无序碳单层的电子结构及氢原子吸附的第一性原理

本研究运用第一性原理计算方法,系统地研究了无序碳单层材料不同位点的电子结构及其析氢性能.计算结果显示无序结构中的C-C键相比于石墨烯中的C-C键在26.7%的范围内有不同程度的拉伸或压缩,使得C原子电荷在-0.17～+0.16个电子范围内变化,导致部分C原子电子局域化.电子的局域化增强了C原子的化学活性,从而表现出了较强的吸附性能.我们发现H原子与C原子的键合及析氢性能与C原子间的键角相关.对于三配位的碳原子,其中三个价电子通过sp~2杂化轨道与最邻近的碳原子结合形成较强的共价键,而余下的一个p_z轨道电子可以与H原子在垂直于原子层的方向形成较弱的化学键.无序结构可以打破三个sp~2杂化轨道的对称性,进而影响p_z轨道与氢的成键.本研究在一定程度上揭示了单层无序碳材料结构-性能的构效关系,为实验上设计特定性能的无序碳功能材料提供理论指导.     

碳纳米管储氢性能的计算机模拟

采用巨正则蒙特卡罗(GCMC Grand Canonical Monte Carlo)方法^[11],系统地研究了锯齿(Zigzag)型单壁碳纳米管(SWNT-Single Walled Carbon Nanotubes)的储氢性能,得到了管径和管长与储氢能力的关系曲线,给出了氢在碳纳米管中的分布,并对碳纳米管储氢能力的表征提出了建设性意见.     

NMR spectroscopy of hydrogen adsorption on single-walled carbon nanotubes after exposure to high pressure

Hydrogen storage properties of single-walled carbon nanotubes (CNTs) after exposure to a pressure of 14.3 MPa are studied by (1)H nuclear magnetic resonance spectroscopy. The nanotubes were carefully pre-characterized using inductively coupled plasma mass spectrometry (ICP-MS), transmission electron microscopy (TEM), and Raman spectroscopy. We have shown previously that at ambient temperature in the pressure range from 0 to 1.5 MPa, hydrogen adsorption is fast and reversible and must be described as physisorption. However, exposure to a much higher pressure (14.3 MPa) of hydrogen leads to slower desorption kinetics where longer exposure causes greater hydrogen uptake. Our data suggest that interstitial sites and the tube interior may be identified as these strong adsorption sites.     

Hydrogen chemisorption on <Emphasis Type="BoldItalic">sp</Emphasis><Superscript><Emphasis Type="Bold">2</Emphasis></Superscript>-bonded carbon: Influence of the local curvature and local electronic effects

We report on the interaction of hydrogen with sp²-bonded carbon which has been investigated on graphite (0001), single-walled carbon nanotubes and C₆₀ multilayer films. These substrates have been chosen to represent a large range of curvature in the carbon network. The photoelectron spectroscopy study of the samples treated with atomic hydrogen and low-energy hydrogen ions reveals that hydrogen is chemisorbed on the basal plane of the sp²-bonded carbon networks, as evidenced by the lowered emission from -derived states and a lowering of the electron work function of up to 1.3 eV. The hydrogen adsorption energy barrier is found to strongly depend on the local curvature of the carbon network whereby the barrier is lowered with increasing curvatures. Whereas in the case of C₆₀ and single-walled carbon nanotubes, hydrogen chemisorption can be achieved by exposure to atomic hydrogen, the chemisorption on graphite (0001) requires hydrogen ions of low kinetic energy (1 eV). Furthermore, the adsorption energy barrier is found to increase with hydrogen coverage.The scanning tunnelling microscopy study of individual adsorption sites on the graphite (0001) surface reveals long-ranged (5 nm) electronic effects observed as a (sqrt(3)×sqrt(3))R30° superstructure in the local density of states. It is shown that this superstructure is due to the scattering of delocalized electron wavefunctions at the point defects. The resulting standing waves induce a redistribution of the local density of states which is directly related to the point-like Fermi surface of graphite. PACS 68.43.-h; 71.20.Tx; 68.37.Ef