Ionic liquids as novel and green media for clean synthesis of soluble aromatic‐aliphatic poly(amide‐ester)s containing hydroxynaphthalene urazole moiety

Ionic liquids (IL)s are very attractive and environmentally acceptable solvents. They can be used as green media for a number of chemical processes. In this investigation, for the advancement of ecological safety and improvement of technological ability of this process, room temperature ionic liquids (RTIL)s and quaternary ammonium salt, tetrabutylammonium bromide (TBAB) have been used both as an environmentally benign solvent and catalyst for the polycondensation 4‐(3‐hydroxynaphthalene)‐1,2,4‐triazolidine‐3,5‐dione ( 3HNTD ) with aliphatic diacid chlorides, eliminating the need for a volatile organic solvent (VOS) and additional catalyst. The reaction of monomer 3HNTD with acetyl chloride was performed in N,N‐dimethylacetamide solution at different molar ratios, and the resulting mono‐, di‐, and trisubstituted derivatives were obtained in high yields and were finally used as models for polymerization reactions. The effects of various reaction parameters, such as the nature of the ILs, the amount of ILs, the reaction temperature, and the reaction time, on the yields and inherent viscosities of the resulting poly(amide‐ester)s (PAE)s were studied. Polycondensation reactions successfully proceeded in IL without any additional extra components, such as triethylamine or pyridine, which are used in similar reactions in organic solvents. Therefore, ILs can act both as solvent and catalyst. In addition to the solubility test, inherent viscosity as a measure of molecular weight was determined. PAEs were obtained in high yields with inherent viscosities ranging from 0.18 to 0.34 dl g^?1. This method was also compared with conventional method for the synthesis of PAEs. Fluorimetric studies of the model compound as well as polymers were performed. Copyright © 2008 John Wiley & Sons, Ltd.     

Preparation of colorless ionic liquids “on water” for spectroscopy

Although colorless ionic liquids (ILs) are most desirable, as synthesized they frequently bear color, despite appearing pure by most analytical techniques. It leads to some uncertainties and limits for the fundamental research and applications of ILs, such as spectroscopy. Using 1-butyl-3-methylimidazolium bromide (BMIMBr), 1-butyl-3-methylimidazolium tetrafluoroborate (BMIMBF₄) and 1-hexyl-3-methylimidazolium bromide (HMIMBr) as models, we demonstrated that following classic preparing method except that the water was added as solvent, colorless ILs could be facilely prepared. Neither critical pre-treatment of starting materials and pre-cautions during the reaction nor time-consuming and costly post-decolor-purification was needed. The effects of “on water” reaction conditions on preparing colorless IL and the reason why using water as solvent could produce colorless ILs were also preliminary investigated. It was found that the reactant solubility played an important role in the preparation of colorless ILs. Not only as a method to evaluate the quality of as-synthesized ILs, but also as a spectroscopic analytical applications, UV-vis spectra showed that the ILs by this “on water” method was spectral pure and sufficient for future fundamental spectroscopic research and applications.     

含膦和含氮配体功能化离子液体中 RuCl3•3H2O 催化分子氧氧化醇

 无共氧化剂参与条件下, 以氧气为氧化剂, 在含膦或含氮配体功能化离子液体和普通离子液体 (溶剂) 组成的混合体系中, RuCl3•3H2O 能有效催化多种醇的选择氧化, 高选择性地生成相应的醛或酮. 其中, 配位能力较弱的含氮配体功能化离子液体更有利于提高钌催化剂的活性和选择性, 但体系无法有效实现钌催化剂的循环使用. 配体功能化离子液体本身的氧化降解是导致钌催化剂失活的根本原因.     

CO2/离子液体体系热力学性质的分子动力学模拟

超临界CO2和离子液体(ILs)是两种绿色溶剂. 离子液体可以溶解超临界CO2, 而超临界CO2不能溶解离子液体. 由此设计构成的CO2/IL二元系统, 同时具备了超临界CO2和离子液体的许多优点: 既可以降低离子液体的粘度, 还便于相分离, 是新型的耦合绿色溶剂. 其物理化学性质对于设计反应、分离等过程非常重要. 因此, 本文以CO2/IL二元系统为研究对象, 通过选择合适的分子力场和系综, 运用分子动力学(MD)模拟方法研究了CO2/[bmim][PF6]、CO2/[bmim][NO3]等体系的热力学性质. 结果表明, CO2对ILs膨胀度的影响非常小, 当CO2摩尔分数为0.5时, ILs膨胀仅为15%. CO2/ILs的扩散系数远小于CO2膨胀甲醇、乙醇溶液的扩散系数. 随着CO2含量的增加, ILs的扩散系数提高, 粘度显著下降, 表明CO2能有效地改善ILs扩散性, 减小其粘度. 因此CO2可用以改善离子液体溶剂体系的传递特性, 增强反应分离过程在其中的进行.     

Ionic liquid-modified dyes and their sensing performance toward acids in aqueous and non-aqueous solutions

Six ionic liquid (IL)-modified dyes were synthesized and characterized. Compared to the methyl red and methyl orange, these IL-modified [MR](-)- or [MO](-)-based dyes exhibit lower melting points and enhanced solubility, and can be used as sensitive indicators towards free proton in both aqueous and non-aqueous solutions. This work also supplies a new concept of developing novel modified materials with the ILs.     

Preparation of polymethyl methacrylate with well-controlled stereoregularity by anionic polymerization in an ionic liquid solvent

This study investigates the effect of ionic liquids (ILs) on the anionic polymerization of methyl methacrylate (MMA). Polymethyl methacrylate (PMMA), an isotactic polymer, is prepared by anionic polymerization at a high reaction temperature with an IL that acts as both solvent and additive. The most plausible reaction mechanism is determined using ¹H NMR and Fourier-transform infrared spectroscopy. The electrostatic interaction between MMA and the IL increases the apparent steric hindrance in MMA, resulting in the isotactic PMMA.     

Ionic Liquids Made with Dimethyl Carbonate: Solvents as well as Boosted Basic Catalysts for the Michael Reaction

This article describes 1) a methodology for the green synthesis of a class of methylammonium and methylphosphonium ionic liquids (ILs), 2) how to tune their acid–base properties by anion exchange, 3) complete neat‐phase NMR spectroscopic characterisation of these materials and 4) their application as active organocatalysts for base‐promoted carbon–carbon bond‐forming reactions. Methylation of tertiary amines or phosphines with dimethyl carbonate leads to the formation of the halogen‐free methyl‐onium methyl carbonate salts, and these can be easily anion‐exchanged to yield a range of derivatives with different melting points, solubility, acid–base properties, stability and viscosity. Treatment with water, in particular, yields bicarbonate‐exchanged liquid onium salts. These proved strongly basic, enough to efficiently catalyse the Michael reaction; experiments suggest that in these systems the bicarbonate basicity is boosted by two orders of magnitude with respect to inorganic bicarbonate salts. These basic ionic liquids used in catalytic amounts are better even than traditional strong organic bases. The present work also introduces neat NMR spectroscopy of the ionic liquids as a probe for solute–solvent interactions as well as a tool for characterisation. Our studies show that high catalytic efficacy of functional ionic liquids can be achieved by integrating their green synthesis, along with a fine‐tuning of their structure. Demonstrating that ionic liquid solvents can be made by a truly green procedure, and that their properties and reactivity can be tailored to the point of bridging the gap between their use as solvents and as catalysts.     

Acceleration of the imine base/isocyanate (IBI)‐mediated polymerization of MMA caused by ionic liquid traces

The brutto rate of the imine base/isocyanate (IBI)‐mediated radical polymerization of methyl methacrylate (MMA) can be significantly increased by use of ionic liquid (IL) traces. At least, catalytic amounts of IL influence both the value of the brutto polymerization rate ν_Br,0 and the necessary reaction temperature of the used IBI mixture. Combinations of 2‐phenyl‐2‐oxazoline (POX) or 1‐methyl pyrazole (1MP) with isocyanates are IBI systems that usually do not initiate MMA at room temperature. By adding traces of 1‐ethyl‐3‐methylimidazolium tris(pentafluoroethyl)trifluorophosphate ([Emim]FAP), polymethyl methacrylate (PMMA) with high average molecular weight can be obtained whereas the initiator mixture (imine base/isocyanate) concentration can be decreased by a factor of 10. The polymerization kinetics of several IBI combinations in the presence of ILs has been determined and a comparison to non‐IL containing initiator mixtures is given. Additionally, the temperature dependence of the IL‐containing polymerizations was measured. The interaction of the IL with MMA and the individual IBI initiator components is studied by means of attenuated total reflection Fourier transformation middle infrared spectroscopy (ATR FT MIR). Furthermore, the IBI brutto polymerization rate constants k_Br,0 were brought into relation to the IL hydrogen bond donating ability α. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Effect of curcumin on liposome: curcumin as a molecular probe for monitoring interaction of ionic liquids with 1,2-dipalmitoyl-sn-glycero-3-phosphocholine liposome

Recent increase and wider use of ionic liquids (ILs) for various applications has drawn attention to their toxicological consequence on human health. The present study explores effects of three different kinds of widely used ILs, such as 1‐methyl‐3‐octylimidazolium chloride, 1‐buytl‐3‐methyl imadazolium tetrafluoroborate and 1‐benzyl‐3‐methyl imidazolium tetrafluoroborate, on liposome properties of 1,2‐dipalmitoyl‐sn‐glycero‐3‐phosphocholine (DPPC) by applying curcumin as molecular probe. Fluorescence intensity of curcumin is reported as a novel rotor which is sensitive to viscosity and thus the fluidity of the solvent. It follows a linear relationship of log fluorescence vs viscosity as proposed by Förster–Hoffmann equation. Curcumin binds strongly to liposome. At low concentration, the lipophilic drug curcumin does not appreciably influence the phase transition temperature of DPPC but as concentration reaches high levels significantly depresses the phase transition temperature. ILs diminish membrane fluidity. 1‐methyl‐3‐octylimidazolium chloride disorders membrane properties by lowering the phase transition as is observed for higher concentration of curcumin, but 1‐buytl‐3‐methyl imidazolium tetrafluoroborate and 1‐benzyl‐3‐methyl imidazolium tetrafluoroborate do not modify phase transition temperature perceptibly; rather they broaden the phase transition at low molar concentration ratio. The three different kinds of ILs under study behave similarly at a high IL:DPPC ratio (1:2), while they behave differently at lower ratios (1:10–1:5).     

Solubility and aggregation of charged surfactants in ionic liquids

Room-temperature ionic liquids (ILs) exhibit a unique set of properties, leading to opportunities for numerous applications. To obtain a better understanding of IL interfaces at a molecular level, we combined charged surfactants with ILs and studied their interfacial behavior. The critical micelle concentration (cmc) of each surfactant-IL pair was determined from both solubility phase diagrams and isotherms. Because the cmc is equivalent to the solubility at the Krafft temperature, a connection between the solubility of the surfactant and the physical properties of the underlying ionic liquid was established. Interfacial energy was found to be the major factor affecting the surfactant aggregation process, although its magnitude depends strongly on the IL structure. The results here give insight into explaining the nature of self-assembly of surfactants at IL interfaces and the interaction between solutes and IL solvents.     

Using ionic liquids to formulate microemulsions: Current state of affairs

Microemulsions are stable mixtures of a polar solvent, surfactant and an unpolar solvent. Ionic liquids (ILs, i.e. salts with melting points below 100 °C) are a huge class of potentially promising solvents. We discuss here published structural or thermodynamic investigations concerning microemulsions in which one or more of the three classical components are ILs.In microemulsions IL can replace respectively the “oil”, the “surfactant” and the “water” phase. Experimental proofs of the existence and stability of microemulsions are given as well as hints at their microstructure. While the four regimes initially defined by Winsor are all accessible, most of the examples of microemulsions containing ionic liquids belong to the class of “rigid” microemulsions. Since additional solutes have characteristic distribution coefficients for each pseudo phase, IL based microemulsions may provide a useful tool for solubilization (reaction medium) and separation, thus allowing the recovery of a large variety of reaction products, but also waste. Further to a discussion of phase diagrams and thermodynamics, we will show some application examples and propose challenges for future studies, in this vast but only emerging domain.     

Zinc Borohydride-Ionic Liquid： Stable and Efficient System for Reductive Reaction of Aldehydes with Primary Amines to Corresponding Secondary Amines

Ionic liquids（ILs） are attracting much attention in various fields of chemical synthesis, electrochemical applications, liquid-liquid extractions, as well as biotransformations. Among those fields, the application of ILs as the potential green solvent for a wide variety of synthetic processes is an area of intense researches. High yield, high selectivity, and good catalytic charac-teristics have usually been achieved. After the isolation of products, ILs can usually be recovered and recycled many times by simple treating procedures, such as, filtration, extraction, and dryness.     

Beneficial effect of water as second solvent in ionic liquid biphasic catalytic hydrogenations

When reactions take place in ionic liquids, a solvent is normally used to extract the products after reaction. It is reported here how the presence of the solvent during the reaction already can seriously improve the catalytic performance. Above all, employing water as the added solvent enhanced the catalytic activities significantly, ascribed to the creation of a well mixed ‘emulsion-like’ system. The reductions of methyl 2-acetamidoacrylate with Rh-EtDuPHOS and of 2-cyclohexen-1-one with Wilkinson’s catalyst in bmimPF₆ were thus successfully performed in the presence of water. The complexes were easily recycled and Rh-EtDuPHOS was even no longer air sensitive.     

离子液体催化甘油和尿素合成甘油碳酸酯

将一系列酸性、碱性和中性的功能化离子液体用于催化甘油和尿素合成甘油碳酸酯。结果表明,中性离子液体表现出更高的催化活性。离子液体阳离子和阴离子的协同效应促进了反应的进行,离子液体阳离子的正电性活化尿素,阴离子的负电性活化甘油,并且催化剂酸碱位点的平衡对催化反应过程也有一定的影响。此外,离子液体可以实现回收利用至少五次,且催化活性基本不变。采用功能化离子液体替代传统金属催化剂,减少了不可再生资源的利用,且所用原料为廉价易得的生物基原料,过程中也不使用有机溶剂,环境友好。     

High pressure solubility data of carbon dioxide in (tri-iso-butyl(methyl)phosphonium tosylate + water) systems

Ionic liquids are attracting great attention nowadays due to their interesting properties which make them useful in a broad range of applications including reaction media or separation/capture of environmentally hazardous gases such as carbon dioxide. In many cases, for practical and/or economical reasons, the use of aqueous solutions of ILs would be preferable to their use as pure compounds.In this work, high pressure equilibrium data for the {carbon dioxide (CO₂) + tri-iso-butyl(methyl)phosphonium tosylate [iBu₃MeP][TOS] + water system were measured at temperatures ranging from (276 to 370) K and pressures up to 100 MPa. Measurements were performed using a high-pressure cell with a sapphire window that allows direct observation of the liquid–vapour transition. Mixtures with different IL concentrations were studied in order to check the influence of the amount of IL on the solubility of CO₂ in the aqueous mixture.The results show that the presence of IL enhances the solubility of CO₂ in the (IL + water) system revealing a salting-in effect of the IL on the solubility of CO₂. The appearance of a three phase region was observed for IL concentrations higher than 4 mol% of IL in water when working at pressures between 4 and 8 MPa and temperatures between (280 and 305) K. In this range, the upper limit of the VLE region observed is shown to increase with the temperature being almost independent of the IL initial concentration in the mixture.     

Ionic Liquids - New Solvents in the Free Radical Polymerization

Summary: The analysis of the influence of ionic liquids (ILs) in polymer synthesis as an alternative for common organic solvents is still an active field of research. 1 Using ILs as solvents for free radical polymerizations implies a significant increase in polymerization rates and molecular weights which can be observed. In this work we examined the copolymerization behaviour of styrene (S) and methyl methacrylate (MMA), glycidyl methacrylate (GMA) and 2-hydroxypropyl methacrylate (HPMA) with acrylonitrile (AN) in 1-etyhl-3-methylimidazolium ethylsulfate ([EMIM]EtSO₄). ILs are liquids with comparable high polarities and viscosities. These two characteristic properties are strongly correlated with the rate coefficients of propagation k_p and termination k_t. 2 - 4 The rate constant of termination k_t decreases when the IL concentration and therefore the viscosity of the reaction mixture is increased, whereas the propagation rate coefficient k_p increases with increasing IL content. The viscosity of the IL can be varied by either working with mixtures of IL with conventional organic solvents – here the IL [EMIM]EtSO₄ was mixed with DMF – or by variation of the temperature. The influence of the viscosity of the IL ([EMIM]EtSO₄) on polymerization kinetics of methyl methacrylate (MMA) and styrene/acrylonitrile (S/AN) was investigated.     

Ionic Liquids as Organocatalysts and Solvents for Lignocellulose Reactions

Ionic liquids (ILs) are the only media that can allow the homogeneous organocatalytic reactions of lignocellulosic biomass (lignocellulose), since the designability of their cations and anions offers the dual functions of solubility and catalytic activity. This review provides an account of our recent achievements in the organocatalytic approaches for converting lignocellulose into polymer materials based on the principles of IL design that we have originally established. These methodologies include the simple and mild chemical modification of cellulose and lignin under high conversions, with high selectivity, and/or with efficient atom economy. Similar reactions and subsequent fractionation processes are applied to lignocellulose, and a highly productive reaction system is developed using a twin-screw extruder that is specific to the IL media.     

Ionic liquid-assisted carboxylation of amines by CO2: a mechanistic consideration

The catalytic roles of ionic liquids (ILs) in the syntheses of 1,3-disubstituted ureas from the carboxylation of amines by CO(2) were experimentally and theoretically investigated. The carboxylation reaction of n-butylamine was greatly facilitated by the presence of an IL and the catalytic activity of the IL was strongly affected by the nucleophilicity of the anion. Computational study on the mechanistic aspects of the carboxylation with methylamine with or without the presence of an IL, 1-ethyl-3-methylimidazolium chloride, implies that the activation energies of the transition states and the intermediate ionic species could be lowered significantly through the multi-interactions of the carbonyl group of CO(2) with both cations and anions of the ILs.     

Controlled Sol–Gel Transitions of a Thermoresponsive Polymer in a Photoswitchable Azobenzene Ionic Liquid as a Molecular Trigger

Producing ionic liquids (ILs) that function as molecular trigger for macroscopic change is a challenging issue. Photoisomerization of an azobenzene IL at the molecular level evokes a macroscopic response (light‐controlled mechanical sol–gel transitions) for ABA triblock copolymer solutions. The A endblocks, poly(2‐phenylethyl methacrylate), show a lower critical solution temperature in the IL mixture containing azobenzene, while the B midblock, poly(methyl methacrylate), is compatible with the mixture. In a concentrated polymer solution, different gelation temperatures were observed in it under dark and UV conditions. Light‐controlled sol–gel transitions were achieved by a photoresponsive solubility change of the A endblocks upon photoisomerization of the azobenzene IL. Therefore, an azobenzene IL as a molecular switch can tune the self‐assembly of a thermoresponsive polymer, leading to macroscopic light‐controlled sol–gel transitions.     

Liquid-vapor equilibrium of the systems butylmethylimidazolium nitrate-CO2 and hydroxypropylmethylimidazolium nitrate-CO2 at high pressure: influence of water on the phase behavior

Ionic liquids (IL) are receiving increasing attention due to their potential as "green" solvents, especially when used in combination with SC-CO2. In this work liquid-vapor equilibria of binary mixtures of CO2 with two imidazolium-based ionic liquids (IL) with a nitrate anion have been experimentally determined: butylmethylimidazolium nitrate (BMImNO3) and hydroxypropylmethylimidazolium nitrate (HOPMImNO3), using a Cailletet apparatus that operates according to the synthetic method. CO2 concentrations from 5 up to 30 mol % were investigated. It was found that CO2 is substantially less soluble in HOPMImNO3 than in BMImNO3. Since these ILs are very hygroscopic, water easily can be a major contaminant, causing changes in the phase behavior. In case these Ils are to be used in practical applications, for instance, together with CO2 as a medium in supercritical enzymatic reactions, it is very important to have quantitative information on how the water content will affect the phase behavior. This work presents the first systematic study on the influence of water on the solubility of carbon dioxide in hygroscopic ILs. It was observed that the presence of water reduces the absolute solubility of CO2. However, at fixed ratios of CO2/IL, the bubble point pressure remains almost unchanged with increasing water content. In order to explain the experimental results, the densities of aqueous mixtures of both ILs were determined experimentally and the excess molar volumes calculated.