Methacrylic acid and methyl methacrylate oligomers adsorbed to porous isotactic poly(methyl methacrylate) ultrathin films and mechanistic studies of living template polymerization

Methacrylic acid (MAA), methyl methacrylate (MMA), methacrylamide, and oligomers of MAA and MMA were selected as a model of active radical species in living template polymerization using stereocomplex formation. The adsorption behaviors of the aforementioned model compounds were examined toward porous isotactic‐(it‐) poly(methyl methacrylate) (PMMA) ultrathin films on a quartz crystal microbalance, which was prepared by the extracting of syndiotactic‐(st‐) poly(methacrylic acid) (PMAA) from it‐PMMA/st‐PMAA stereocomplexes. The apparent predominant adsorption of oligomers to monomers was observed in both PMAA and PMMA oligomers, suggesting that the mechanism of template polymerization follows the pick up mechanism. Although vinyl monomers were not incorporated into the porous it‐PMMA ultrathin film, both PMMA and PMAA oligomers were adsorbed at the initial stages. However, adsorbed amounts were limited to about 5 and 15% at 0.1 mol L^?1, respectively, which are much smaller values than corresponding st‐polymers. The results imply that radical coupling reaction is prevented during template polymerization to support the resulting living polymerization. ATR‐IR spectral patterns of oligomer complexes and it‐PMMA slightly changed in both cases, suggesting complex formation. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5879–5886, 2008     

Synthesis of Hydroxy-Functional PMMA Macromonomers by Anionic Polymerization

Living anionic polymerization has been utilized to synthesize hydroxy end-functionalized PMMA macromonomers with styryl or allyl functionalities as the polymerizable end-groups. Protected hydroxy-functionalized alkyl lithium initiators have been used to initiate anionic polymerization of MMA. Subsequently the living chains with protected hydroxyl function have been terminated using 4-vinylbenzyl chloride (4-VBC) or allyl methacrylate (ALMA) to form α-hydroxy-ω-styryl and α-hydroxy-ω-allyl PMMA, respectively. These protected hydroxy-functionalized PMMA macromonomers have been characterized by GPC and ¹H-NMR. Termination using 4-VBC led to 50% functionalization, whereas that using allyl methacrylate led to 100% functionalization of the hydroxy-PMMA.     

SYNTHESIS OF CHIRAL BINAPHTHYL CROWN ETHERS AND THEIR USE IN ANIONIC POLYMERIZATION OF METHYL METHACRYLATE AS INITIATOR LIGANDS

INTRODUCTIONAnionic polymerization of MMA could be carried out with alkyllithium or Grignard reagent etc. in a non-polarsolvent. However, this polymerization system often involves multiple active species and side reactions dependingon initiator, countercation, solvent and polymerization temperature etc. Therefore, the molecular weightdistribution and stereomicrostructure of PMMA obtained would be very different[1-4]. These differences wouldbe mainly caused by the nucleophilic attack of…     

Radical polymerization of methyl methacrylate in the presence of stereoregular poly(methyl methacrylate). V. Kinetics of initial template polymerization

The influence of stereoregular poly(methyl methacrylate) (PMMA) as a polymer matrix on the initial rate of radical polymerization of methyl methacrylate (MMA) has been measured between ?11 and +60°C using a dilatometric technique. Under proper conditions an increase in the relative initial rate of template polymerization with respect to a blank polymerization was observed. Viscometric studies showed that the observed effect could be related to the extent of complex formation between the polymer matrix and the growing chain radical. The initial rate was dependent on tacticity and molecular weight of the matrix polymer, solvent type and polymerization temperature. The accelerating effect was most pronounced (a fivefold increase in rate) at the lowest polymerization temperature with the highest molecular weight isotactic PMMA as a matrix in a solvent like dimethylformamide (DMF), which is known to be a good medium for complex formation between isotactic and syndiotactic PMMA. The acceleration of the polymerization below 25°C appeared to be accompanied by a large decrease in the overall energy and entropy of activation. It is suggested that the observed template effects are mainly due to the stereoselection in the propagation step (lower activation entropy Δ S_p^?) and the hindrance of segmental diffusion in the termination step (higher activation energy Δ E_t^?) of complexed growing chain radicals.     

Solid matrix polymerization and stereoisomeric complexes of poly(methyl methacrylate)

The polymerization of methyl methacrylate within solid matrices of stereoregular poly(methyl methacrylate) has been studied by proton NMR and wide angle X-ray diffraction. The semi-crystalline isotactic (i-) PMMA matrix was synthesized in the laboratory by anionic polymerization initiated by phenylmagnesium bromide, and the syndiotactic (s-) PMMA matrix was synthesized through a Ziegler–Natta reaction. Matrix polymerization of the monomer was initiated through the redox activation of benzoyl peroxide with N,N-dimethyl-p-toluidine. NMR measurements of triad distributions in matrix-polymerized chains suggest that the well-known stereospecific replica polymerization in PMMA (syndiotactic sequences promote isotactic sequences and vice versa) plays only a limited role in the systems studied. Experimental results indicate that chains grown within the i-PMMA or s-PMMA solid matrices have greater degrees of configurational disorder. The greater concentration of atactic triads in these chains could be the result of limited free volume or steric effects during polymerization in a highly condensed environment. X-ray diffraction studies of solution cast blends of isotactic PMMA and PMMA with conventional tacticity reveal some crystallinity with a structure characteristic of the stereocomplex formed by isotactic and syndiotactic PMMA from suitable solvents. Evidence was obtained for the presence of this complex in solidified mixtures of the i-PMMA solid matrix and liquid monomer. This observation is an example of special intermolecular structures that can form under conditions of in situ growth of chains within a pre-polymerized matrix.     

Vinyl polymerization by lithium organocuprates

Vinyl polymerizations initiated by lithium organocuprates under several conditions were investigated. It was observed that this catalyst was effective in the polymerization of specific monomers such as α,β-unsaturated nitrile and carbonyl analogues. The rate of polymerization was rapid but retarded by the addition of pyridine, nitrobenzene, or hydroquinone. Polymerization of methyl methacrylate (MMA) with lithium di-n-butylcuprate as initiator produces predominantly isotactic poly(methyl methacrylate) (PMMA) in toluene. The overall activation energy was estimated as 3.5 kcal/mol deg. Lithium di-n-butylcuprate exerts a higher stereoregulating effect on the addition of monomers than other organolithium initiators. It is proposed that polymerization proceeds via a coordinated anionic mechanism.     

Stereospecific bulk polymerization of methyl methacrylate initiated by its tactic polymers

Methyl methacrylate (MMA) was polymerized by radical initiation at 90°C by its own preformed tactic polymers, i.e., conventional (c-PMMA), isotactic (i-PMMA), and syndiotactic (s-PMMA) PMMA, and also by a preformed 1:1 stereocomplex of i-PMMA and s-PMMA. The collected polymers were separated into two fractions by extraction with boiling acetone and characterized by 60 MHz NMR spectra and viscometry. Higher polymerization rates were obtained in the presence of stereo-regular PMMA than in the presence of c-PMMA. Moreover, it appeared that i-PMMA promoted the formation of s-PMMA, and conversely s-PMMA the formation of i-PMMA, especially in the initial stages of the reaction. A higher M?_v of the preformed polymer yielded a higher rate and a higher stereospecificity of the polymerization. No polymerization took place in the absence of performed PMMA. The results support a replica mechanism proposed by Szwarc, in which polymerization is preceded by a specific arrangement of monomeric units along the polymeric chain into a distinctive pattern. Such arrangement coupled with a strong tendency of the isotactic and syndiotactic species to associate may lead to the present stereospecific replica polymerization. This association is demonstrated by rapid gelation during polymerization and by lowering of reduced viscosity in very dilute mixtures of i-PMMA and s-PMMA in MMA.     

Radical polymerization of methyl methacrylate with ethane-1,1,2-triyltribenzene as an initiator and ethane-1,1,2-triyltribenzene-end polymers as macroinitiators

An unsymmetrical triphenylethane, ethane-1,1,2-triyltribenzene (ETB), was successfully prepared from phenyl lithium, trans-1,2-diphenylethylene, and methanol. Characterization of the compound was performed by ¹H and ¹³C nuclear magnetic resonance spectroscopy (NMR). The polymerization of methyl methacrylate (MMA) was performed in the presence of ETB at 85 °C or higher. The free radicals obtained were characterized by ultra-performance liquid chromatography coupled with quadrupole time-of-flight mass spectrometry (UPLC/Q-TOF MS). Gel permeation chromatography (GPC) traces of the average molecular weight of poly(MMA) (PMMA) showed a series of translations with increasing time. The average molecular weight of PMMA indicated narrow polydispersity, and a linear relationship was found between ln([M]₀/[M]) and polymerization time. These results indicated the “living” nature of the polymerization of MMA in the presence of ETB. The structure of ETB was also introduced to the end of polystyrene (PS), polyisoprene (PI), and polyisoprene-b-polystyrene (PIS) chains which were obtained by living anionic polymerization. Hence, they initiated radical polymerization of MMA as ETB-end-macroinitiators to obtain block copolymers. Thus, living anionic polymerization and this radical polymerization method were combined together to prepare block copolymers without the intermediate transformation step.     

RAFT Polymerization: Adding to the Picture

SUMMARY: Factors affecting the choice of RAFT agent [RSC(Z) = S] for a given polymerization are discussed. For polymerization of methyl methacrylate (MMA), tertiary cyanoalkyl trithiocarbonates provide very good control over molecular weight and distribution and polymerizations show little retardation. The secondary trithiocarbonate RAFT agents with R = CHPh(CN) also gives good control but an inhibition period attributed to slow reinitiation is manifest. Radical induced reduction with hypophosphite salts provides a clean and convenient process for removal of thiocarbonylthio end groups of RAFT-synthesized polymers. Two methods providing simultaneous control over stereochemistry and molecular weight distribution of chains formed by radical polymerization are reported. Polymerization of MMA in the presence of scandium triflate provides a more isotactic PMMA. A similar RAFT polymerization with trithiocarbonate RAFT agents also provides control and avoids issues of RAFT agent instability seen with dithiobenzoate RAFT agents in the presence of Lewis acids. RAFT polymerization of tetramethylammonium methacrylate at 45 °C provides a more syndiotactic PMMA of controlled molecular weight and distribution (after methylation; mm:mr:rr 2:21:77 compared to 3:35:62 when formed by bulk polymerization of MMA).     

Acceleration of the imine base/isocyanate (IBI)‐mediated polymerization of MMA caused by ionic liquid traces

The brutto rate of the imine base/isocyanate (IBI)‐mediated radical polymerization of methyl methacrylate (MMA) can be significantly increased by use of ionic liquid (IL) traces. At least, catalytic amounts of IL influence both the value of the brutto polymerization rate ν_Br,0 and the necessary reaction temperature of the used IBI mixture. Combinations of 2‐phenyl‐2‐oxazoline (POX) or 1‐methyl pyrazole (1MP) with isocyanates are IBI systems that usually do not initiate MMA at room temperature. By adding traces of 1‐ethyl‐3‐methylimidazolium tris(pentafluoroethyl)trifluorophosphate ([Emim]FAP), polymethyl methacrylate (PMMA) with high average molecular weight can be obtained whereas the initiator mixture (imine base/isocyanate) concentration can be decreased by a factor of 10. The polymerization kinetics of several IBI combinations in the presence of ILs has been determined and a comparison to non‐IL containing initiator mixtures is given. Additionally, the temperature dependence of the IL‐containing polymerizations was measured. The interaction of the IL with MMA and the individual IBI initiator components is studied by means of attenuated total reflection Fourier transformation middle infrared spectroscopy (ATR FT MIR). Furthermore, the IBI brutto polymerization rate constants k_Br,0 were brought into relation to the IL hydrogen bond donating ability α. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Polymerization of methyl methacrylate using bis(β‐ketoamino)nickel(II)–MAO catalytic systems

The polymerization of methyl methacrylate (MMA) was investigated using a series of bis(β‐ketoamino)nickel(II) complexes in combination with methylaluminoxane in toluene solution. The binary catalyst is necessary for initiating MMA polymerization and producing PMMA with high molecular weights but broad molecular weight distributions. The effects of reaction temperature and Al:Ni molar ratios on the polymerization of MMA were examined in detail. Both steric bulk and electronic effects of the substituents around the imino group in the ligand on MMA polymerization activities could be observed. Relative to electronic effects, the steric hindrance of the ligands displayed a more significant effect on the catalytic activities, with the catalytic activity sequence observed in the order 4 > 1 > 2 > 3 > 5 > 6. Structural analyses of the polymers by ¹³C NMR spectra indicate that polymerization yields PMMA with a syndiotactic‐rich atactic microstructure. Copyright © 2006 John Wiley & Sons, Ltd.     

Radical polymerization of methyl methacrylate in the presence of isotactic poly(methyl methacrylate)

Methyl methacrylate (MMA) was polymerized by radical initiation at 25°C in DMF in the presence of preformed isotactic PMMA (iMA) with about 90% isotactic triads and different M?_v's, viz., iMA-1: 7.2 × 10⁵; iMA-2, 5.0 × 10⁵; iMA-3, 3.5 × 10⁵; iMA-4, 1.25 × 10⁵; and iMA-5, 1.15 × 10⁵. The MMA:iMA ratio was 6:1. The collected polymers were separated into two fractions by extraction with boiling acetone and characterized by 60 MHz NMR. It is found that the M?_v of the polymer formed ran parallel to the M?_v of iMA. In all cases syndiotactic PMMA (s-PMMA) was produced which associated with the isotactic substrate to form acetone-insoluble stereocomplexes. The syndiotactic polymers probably consist of long syndiotactic and heterotactic sequences. The syndiotacticity decreased with conversion and was generally highest in the presence of iMA-1. With iMA-1 even the formation of some additional i-PMMA (in the acetone-insolubles) was indicated, especially in the later stages of the polymerization. Characterization of the acetone-soluble fractions indicated that i,s-stereoblock polymers were also produced, of which the persistence ratios ρ increased with the M?_v of iMA. From these results it is concluded that this reaction differs from the conventional radical polymerization and can be considered a stereospecific replica polymerization, the driving force being the strong tendency of i- and s-PMMA to associate. The formation of i,s-stereoblock polymers and additional i-PMMA indicates that s-PMMA in its turn can also act as a polymer matrix.     

Poly(methyl methacrylate) composites prepared by in situ polymerization using organophillic nano-to-submicrometer zinc oxide particles

Nano- and submicrometer zinc(II) oxide particles were synthesized by the polyol method and were used for the preparation of ZnO/poly(methyl methacrylate) (ZnO/PMMA) composite materials by the chain polymerization of methyl methacrylate (MMA) in bulk. ZnO particles with an organophilic surface layer were homogeneously dispersed in the PMMA matrix. Very low concentrations (0.1 wt.%) of nano zinc oxide absorbed over 98% of UV light as determined by UV-vis spectroscopy. Nano zinc oxide (75 nm) increased the initial decomposition temperature of the PMMA matrix by 30-40 °C at concentrations of 0.1% and above. This was explained by the changes in the termination mechanism of MMA polymerization resulting in a reduced concentration of vinylidene chain ends. Nano ZnO also increased the MMA polymerization reaction rate and reduced the activation energy. Submicrometer ZnO showed lower UV absorption, thermal stabilization and no influence on the reaction kinetics indicating that average particle size is of vital importance for the properties of PMMA nanocomposites and for MMA polymerization.     

Radiation-Induced Polymerization of Methyl Methacrylate at High Pressure

Radiation-induced polymerization of methyl methacrylate (MMA) was studied up to 7500 kg/cm² at 20°C. The rate of polymerization increased to 3000 kg/cm² with overall activation volume ΔV_pol? of -23.6 cm³/mole, and then the pressure dependence of the rate was very small in the pressure range between 3000 and 3700 kg/cm². The rate of polymerization increased again above 3700 kg/cm² up to the crystallization pressure of MMA (5500 kg/cm²) with ΔV_pol? of -13.7 cm³/ mole with increasing pressure. The volume contraction by polymerization decreased with increasing pressure up to 3000 kg/cm² but hardly decreased with increasing pressure above 3000 kg/cm². The stereoregulzarity (triad probability) of PMMA changed slightly at 3000 kg/cm; above 3000 kg/cm², syndiotactic addition decreased and heterotactic addition increased. Marked change in P-V isotherms of MMA, however, was not observed about 3000 kg/cm². We concluded from these facts that an alignment of monomer molecules, which does not cause large volume change, was realized about 3000 kg/cm². Polymerization proceeded above the crystallization pressure by long time irradiation, and isotactic addition increased clearly in the solid-state polymerization.     

Synthesis of Block Copolymers of 2‐Ethylhexyl Methacrylate,n‐Hexyl Methacrylate and Methyl Methacrylate via Anionic Polymerization at Ambient Temperature

It still remains a concern to break through the bottlenecks of anionic polymerization of polar monomers, such as side reactions, low conversion and low temperature (–78°C). In this work, potassium tert‐butoxide (t‐BuOK) was chosen to initiate the anionic polymerization of 2‐ethylhexyl methacrylate (EHMA) in tetrahydrofuran. The conversions were above 99% at 0 or 30°C, and above 95% at 60°C without side reaction inhibitors. The high conversions implied t‐BuOK could suppress the side reactions. A series of block copolymers of EHMA, n‐hexyl methacrylate (HMA) and methyl methacrylate (MMA) were further synthesized at 0°C, and the conversions were all above 99%. The GPC and ¹H NMR results confirmed the successful synthesis of the block copolymers. The molecular size of monomer and the state of t‐BuOK (free ion pairs or aggregates) remarkably affected the polymerization rates and the molecular structures of the products. The DMA results indicated that the glass transition temperatures of PEHMA or PHMA block and PMMA block were 20°C and 60°C, respectively, which deviated from –2°C and 105°C of homopolymer, respectively, due to the partial compatibility of the blocks. This work explored a route of the anionic polymerization of polar monomers at room temperature.     

苯氧铜/正丁基锂体系引发MMA负离子聚合及其活性特征的研究

采用苯氧铜/正丁基锂(PhOCu/n-BuLi)体系引发MMA聚合, 通过GPC, ¹H NMR对聚合物进行了表征. 实验结果表明, 该体系聚合反应速度较快, 温度、引发体系组成是影响聚合物分子量及其分布、单体转化率、引发剂引发效率、聚合物的立构规整性的主要因素; －40 ℃时分子量分布比较窄, 但引发效率也比较低(大约15%). 低引发效率、宽分子量分布与引发剂的聚集状态有关. 分子量与单体浓度、引发剂浓度的关系说明, 该体系具有一定程度的活性聚合特点.     

Radical polymerization of methyl methacrylate in the presence of stereoregular poly(methyl methacrylate). II. Syndiotactic PMMA as matrix

Methyl methacrylate (MMA) was polymerized by radical initiation at 25°C in DMF in the presence of preformed syndiotactic PMMA (sMA) with about 90% syndiotactic triads and of different M?_v, viz., sMA-1, 1.6 × 10⁵; sMA-2, 3.0 × 10⁵; and sMA-3, 8.7 × 10⁵. The MMA:sMA ratio was 6:1. The collected polymers were separated into two fractions by extraction with boiling acetone and characterized by 60 MHz NMR. In all cases isotactic PMMA (i-PMMA) was produced, especially in the initial reaction stages, which associated with the syndiotactic substrate to form acetone-insoluble 1:2 i/s-stereocomplexes. The isotacticity decreased with conversion and was highest in the presence of sMA-3. Characterization of the acetone-soluble fractions indicated that i,s-stereoblock polymers were also produced. From these results it is concluded that this reaction can be considered a stereospecific replica polymerization, the driving force being the strong tendency of i-PMMA and s-PMMA to associate. With sMA of M?_v below about 1.2 × 10⁵, no i-PMMA is formed; in other words, no replica polymerization occurs. For polymerizations in the presence of sMA-2, the critical M?_v of propagating chains, with has to be exceeded before stereoassociation is strong enough to effectuate replica polymerization, has been estimated to be 0.6 × 10⁵.     

Grafting of polymers onto carbon whisker by anionic graft polymerization of vinyl monomers using metallized aromatic rings and/or phenoxy lithium groups on the surface as initiator

During the anionic polymerization of methyl methacrylate (MMA) initiated by n-butyl-lithium (n-BuLi) in the presence of carbon whisker, PMMA was found to be grafted onto the surface depending on the propagation from OLi groups, which are produced by the reaction of oxygen containing groups on the surface with n-BuLi. But no grafting of polystyrene was observed at all. By the activation of OLi groups by the addition of crown ether, however, the grafting of polystyrene onto the carbon whisker was achieved. On the other hand, it was found that metallized carbon whisker also initiates the anionic graft polymerization of MMA and styrene: percentage of grafting of PMMA and polystyrene reached 231.3 and 157.9%, respectively. The metalation of carbon whisker was achieved by the treatment with n-BuLi in aprotic polar solvents, such as N,N,N′,N′-tetramethylethylene-diamine or hexamethylphosphorous triamide, and in toluene in the presence of complexing agent of cation such as crown ether or a small amount of aprotic solvent. In the polymerization, grafted polymer chains were considered to propagate both from metallized aromatic rings and from OLi groups. The polymer-grafted carbon whisker gave a stable colloidal dispersion in organic solvents.     

Radical polymerization of methyl methacrylate in the presence of stereoregular poly(methyl methacrylate). IV. Influence of solvent type

Methyl methacrylate (MMA) was polymerized by radical initiation at 25°C or 35°C in various solvents in the presence of stereoregular poly(methyl methacrylate) (PMMA). The occurrence of stereospecific replica polymerization appeared to be related to the capability of stereoassociation of isotactic and syndiotactic PMMA. The solvents can be roughly divided into three types. Type A solvents are polar solvents, which promote stereoassociation resulting in gelation and precipitation. Examples are dimethylformamide, dimethyl sulfoxide, and acetone. Type B solvents are nonpolar aromatic solvents like benzene and toluene, wherein stereoassociation is weaker but still leads to gelation. Type C solvents are very good solvents, in which stereoassociation does not occur. Chloroform and dichloromethane belong to this class. In solvents of type A as well as type B, polymerization in the presence of i-PMMA as a polymer matrix was syndiospecific. However, in the presence of s-PMMA as a polymer matrix the polymerization was isospecific only in type A solvents. The syndiotactic or isotactic triad contents of the polymer formed could be as high as ca. 90% at low conversions. In solvents of type C, polymerization in the presence of stereoregular PMMA proceeds according to a normal radical mechanism. Syndiotacticity was always less than 70%. Stereocomplexes formed in situ during replica polymerization were partly crystalline as detected by x-ray diffraction. The highest crystallinity was detected in those formed in type A solvents.     

Anionic living polymerization of alkyl methacrylate at ambient temperature and its mechanism research

In order to break through the bottleneck of anionic polymerization, polar monomers such as methyl methacrylate (MMA), ethyl methacrylate, butyl methacrylate, and hexyl methacrylate are subjected to anionic polymerization at room temperature in tetrahydrofuran (THF) using potassium tert‐butoxide (t‐BuOK) as the initiator. The polymerization of alkyl methacrylates is studied by multidetector gel permeation chromatography, proton nuclear magnetic resonance (¹H‐NMR) and ¹³C‐NMR spectroscopy, and dynamic laser light scattering. It is found that t‐BuOK can initiate the living anionic polymerization of polar alkyl methacrylate, and the polymerization conversion almost reaches up to 100%. t‐BuOK exists into two kinds of agglomerates, whose hydrodynamic volumes are 10 and 80 nm, respectively. t‐BuOK in THF is similar to emulsion and has a critical active species concentration of about 0.0265 mol L^?1 and does not depend on how much t‐BuOK is added. After the initiation of the polymerization, the large agglomerates of a loose and less regular structure that have occupied the main part of t‐BuOK are greatly reduced, but they do not continue to decrease until they disappear according to the equilibrium theory. Similarly, the active chain after initiation also will not aggregate again. Furthermore, t‐BuOK also has an active species with smaller average vibration size between cation and anion pairs, which can only initiate the polymerization of MMA with rather slow rate but cannot initiate other alkyl methacrylates. At last, because t‐BuOK can make the dormant species caused by side reactions to be revived, the anionic polymerization of MMA could obtain a high yield. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 1130–1139