Synthesis of Two‐Dimensional Transition‐Metal Phosphates with Highly Ordered Mesoporous Structures for Lithium‐Ion Battery Applications

Materials with ordered mesoporous structures have shown great potential in a wide range of applications. In particular, the combination of mesoporosity, low dimensionality, and well‐defined morphology in nanostructures may exhibit even more attractive features. However, the synthesis of such structures is still challenging in polar solvents. Herein, we report the preparation of ultrathin two‐dimensional (2D) nanoflakes of transition‐metal phosphates, including FePO₄, Mn₃(PO₄)₂, and Co₃(PO₄)₂, with highly ordered mesoporous structures in a nonpolar solvent. The as‐obtained nanoflakes with thicknesses of about 3.7 nm are constructed from a single layer of parallel‐packed pore channels. These uniquely ordered mesoporous 2D nanostructures may originate from the 2D assembly of cylindrical micelles formed by the amphiphilic precursors in the nonpolar solvent. The 2D mesoporous FePO₄ nanoflakes were used as the cathode for a lithium‐ion battery, which exhibits excellent stability and high rate capabilities.     

Ultrathin Metal–Organic Framework Nanosheets with Ultrahigh Loading of Single Pt Atoms for Efficient Visible‐Light‐Driven Photocatalytic H2 Evolution

A surfactant‐stabilized coordination strategy is used to make two‐dimensional (2D) single‐atom catalysts (SACs) with an ultrahigh Pt loading of 12.0 wt %, by assembly of pre‐formed single Pt atom coordinated porphyrin precursors into free‐standing metal–organic framework (MOF) nanosheets with an ultrathin thickness of 2.4±0.9 nm. This is the first example of 2D MOF‐based SACs. Remarkably, the 2D SACs exhibit a record‐high photocatalytic H₂ evolution rate of 11 320 μmol g^?1 h^?1 via water splitting under visible light irradiation (λ>420 nm) compared with those of reported MOF‐based photocatalysts. Moreover, the MOF nanosheets can be readily drop‐casted onto solid substrates, forming thin films while still retaining their photocatalytic activity, which is highly desirable for practical solar H₂ production.     

Three‐Dimensional Bimetal‐Graphene‐Semiconductor Coaxial Nanowire Arrays to Harness Charge Flow for the Photochemical Reduction of Carbon Dioxide

The photochemical conversion of carbon dioxide provides a straightforward and effective strategy for the highly efficient production of solar fuels with high solar‐light utilization efficiency. However, the high recombination rate of photoexcited electron–hole (e‐h) pairs and the poor photostability have greatly limited their practical applications. Herein, a practical strategy is proposed to facilitate the separation of e‐h pairs and enhance the photostability in a semiconductor by the use of a Schottky junction in a bimetal‐graphene‐semiconductor stack array. Importantly, Au‐Cu nanoalloys (ca. 3 nm) supported on a 3D ultrathin graphene shell encapsulating a p‐type Cu₂O coaxial nanowire array promotes the stable photochemical reduction of CO₂ to methanol by the synergetic catalytic effect of interfacial modulation and charge‐transfer channel design. This work provides a promising lead for the development of practical catalysts for sustainable fuel synthesis.     

Single‐Step Synthesis of Mesoporous Carbon Nitride/Molybdenum Sulfide Nanohybrids for High‐Performance Sodium‐Ion Batteries

Molybdenum disulfide (MoS₂) is a promising candidate as a high‐performing anode material for sodium‐ion batteries (SIBs) due to its large interlayer spacing. However, it suffers from continued capacity fading. This problem could be overcome by hybridizing MoS₂ with nanostructured carbon‐based materials, but it is quite challenging. Herein, we demonstrate a single‐step strategy for the preparation of MoS₂ coupled with ordered mesoporous carbon nitride using a nanotemplating approach which involves the pyrolysis of phosphomolybdic acid hydrate (PMA), dithiooxamide (DTO) and 5‐amino‐1H‐tetrazole (5‐ATTZ) together in the porous channels of 3D mesoporous silica template. The sulfidation to MoS₂, polymerization to carbon nitride (CN) and their hybridization occur simultaneously within a mesoporous silica template during a calcination process. The CN/MoS₂ hybrid prepared by this unique approach is highly pure and exhibits good crystallinity as well as delivers excellent performance for SIBs with specific capacities of 605 and 431 mAhg^?1 at current densities of 100 and 1000 mAg^?1, respectively, for SIBs.     

Non‐surfactant template‐directed synthesis of SiO2‐polyimide hybrid self‐standing films with ordered mesoporous structure

The silica‐PI hybrid self‐standing films with ordered mesoporous structure have been prepared by using dibenzoyl‐L ‐tartaric acid (L ‐DBTA) as non‐surfactant template under mild sol–gel route. Polyimide matrix was obtained from polyamic acid (PAA) via thermal imidization process and the template was removed in this process. The PI‐based hybrid film with 20 wt% SiO₂ obtained from DBTA presented the ordered mesoporous channels with average pore size of about 2.0 nm and BET surface area of 1167 m²/g. FTIR and SEM studies indicated that the hydrogen bond interaction between the carboxylic groups of DBTA and benzamide bonds of PAA made the PAA possibly participate in the assembly process of the aggregates of the non‐surfactant template molecules. The mechanical, thermal and some physical properties of these hybrid films materials were also characterized. Copyright © 2010 John Wiley & Sons, Ltd.     

Preparation of the Monolith of Hierarchical Macro‐/Mesoporous Calcium Silicate Ultrathin Nanosheets with Low Thermal Conductivity by Means of Ambient‐Pressure Drying

Calcium silicate monolith was prepared by the hydrothermal reaction of a slurry of SiO₂, calcium hydroxide, and surfactant (OP‐10) obtained by high‐energy ball milling, followed by drying at ambient pressure. By using this strategy, the shrinkage due to the collapse of pores during the drying of porous materials, which is a commonly observed phenomena, was successfully avoided. It has a unique microstructure of hierarchical macro‐/mesoporous ultrathin calcium silicate nanosheets with a layered gyrolite crystalline structure. Very interestingly, the calcium silicate nanosheets can be peeled off to give a single‐layer nanosheet (1.23 nm) of gyrolite by ultrasonication. The monolith has a low apparent density (0.073 g cm^?3) and low thermal conductivity (0.0399 W K^?1 m^?1). The reasons behind why the formation of the unique hierarchical macro‐/mesoporous ultrathin nanosheets avoids shrinkage during the hydrothermal reaction and drying, and considerably decreases the thermal conductivity, is discussed.     

Ice/Salt-Assisted Synthesis of Ultrathin Two-Dimensional Micro/Mesoporous Iron and Nitrogen Co-Doped Carbon as an Efficient Electrocatalyst for Oxygen Reduction

An ice/salt-assisted strategy has been developed to achieve the green and efficient synthesis of ultrathin two-dimensional (2D) micro/mesoporous carbon nanosheets (CNS) with the dominant active moieties of Fe−N₄ (Fe-N-CNS) as high-performance electrocatalysts for the oxygen reduction reaction (ORR). The strategy involves freeze-drying a mixture of iron porphyrin and KCl salt using ice as template followed by a confined pyrolysis with KCl as an independent sealed nanoreactor to facilitate the formation of 2D carbon nanosheets, N incorporation, and porosity creation. The well-defined assembly of ultrathin 2D carbon nanosheets ensures high utilization of D1 and D3 Fe−N₄ active sites, and effectively promotes the mass transport of ORR reactants by virtue of the pronounced mesoporous structure. The resulting Fe-N-CNS electrocatalyst was shown to exhibit superior ORR activity, better electrochemical durability, and methanol tolerance towards ORR in alkaline electrolyte relative to the commercial Pt/C electrocatalyst.     

Effects of CNT‐film Pretreatment on the Characteristics of NiCo2O4/CNT Core‐shell Hybrids as Electrode Material for Electrochemistry Capacitor

NiCo₂O₄/CNT nanocomposite films were fabricated by in‐situ growing ultrafine NiCo₂O₄ nanoparticles on acid‐modified carbon nanotube (CNT) films. The effects of CNT‐film pretreatment were investigated thoroughly by various characterization outfits including Fourier Transform Infrared spectroscopy (FT‐IR), X‐ray photoelectron spectroscopy (XPS), Raman spectroscopy, RTS‐9 four‐point probes resistivity measurement system, X‐ray powder diffraction (XRD), scanning electron microscopy (SEM) and CHI660D electrochemical workstation. These results suggested that carbon nanotubes were uniformly wrapped by NiCo₂O₄ nanoparticles forming a hierarchical core‐shell structure. And the crystallinity, conductivity of the CNTs and detail structure (both morphology and size) of the NiCo₂O₄ nanoparticles varied with prolonged acid treatment time which resulted in increased functional groups and defects on CNT films and further affected the electrochemical properties. The composite film composed of the CNT film pretreated by mixed acid for 12 h exhibited excellent electrochemical properties: 828 F/g at 1 A/g and 656 F/g at 20 A/g, and maintained over 99 % of its capacitance after 3000 cycles of charge/discharge at 5 A/g. Acid treatment for either too long or too short is detrimental to the electrochemical properties of the composite films. Such work should be of fundamental importance for tailoring electrochemical properties by elaborate design of acid treatment on CNTs.     

Generalized Low‐Temperature Fabrication of Scalable Multi‐Type Two‐Dimensional Nanosheets with a Green Soft Template

Two‐dimensional nanosheets with high specific surface areas and fascinating physical and chemical properties have attracted tremendous interests because of their promising potentials in both fundamental research and practical applications. However, the problem of developing a universal strategy with a facile and cost‐effective synthesis process for multi‐type ultrathin 2 D nanostructures remains unresolved. Herein, we report a generalized low‐temperature fabrication of scalable multi‐type 2 D nanosheets including metal hydroxides (such as Ni(OH)₂, Co(OH)₂, Cd(OH)₂, and Mg(OH)₂), metal oxides (such as ZnO and Mn₃O₄), and layered mixed transition‐metal hydroxides (Ni‐Co LDH, Ni‐Fe LDH, Co‐Fe LDH, and Ni‐Co‐Fe layered ternary hydroxides) through the rational employment of a green soft‐template. The synthesized crystalline inorganic nanosheets possess confined thickness, resulting in ultrahigh surface atom ratios and chemically reactive facets. Upon evaluation as electrode materials for pseudocapacitors, the Ni‐Co LDH nanosheets exhibit a high specific capacitance of 1087 F g^?1 at a current density of 1 A g^?1, and excellent stability, with 103 % retention after 500 cycles. This strategy is facile and scalable for the production of high‐quality ultrathin crystalline inorganic nanosheets, with the possibility of extension to the preparation of other complex nanosheets.     

Nitrogen‐Doped Graphitic Porous Carbon Nanosheets Derived from In Situ Formed g‐C3N4 Templates for the Oxygen Reduction Reaction

Heteroatom‐doped carbon materials have been considered as potential substitutes for Pt‐based electrocatalysts for the oxygen reduction reaction (ORR) in alkaline fuel cells. Here we report the synthesis of oxygen‐containing nitrogen‐doped carbon (ONC) nanosheets through the carbonization of a mixture that contained glucose and dicyandiamide (DCDA). In situ formed graphitic carbon nitride (g‐C₃N₄) derived from DCDA provided a nitrogen‐rich template, thereby facilitating the formation of ONC nanosheets. The resultant ONC materials with high nitrogen content, high specific surface areas, and highly mesoporous total volume displayed excellent electrochemical performance, including a similar ORR onset potential, half‐potential, a higher diffusion‐limited current, and excellent tolerance to methanol than that of the commercial Pt/C catalyst, respectively. Moreover, the ONC‐850 nanosheet displayed high long‐term durability even after 1000 cycles as well as a high electron transfer number of 3.92 (4.0 for Pt/C). Additionally, this work provides deeper insight into these materials and a versatile strategy for the synthesis of cost‐effective 2D N‐doped carbon electrocatalysts.     

Stress‐Transfer‐Induced In Situ Formation of Ultrathin Nickel Phosphide Nanosheets for Efficient Hydrogen Evolution

Ultrathin two‐dimensional (2D) nanostructures have attracted increasing research interest for energy storage and conversion. However, tackling the key problem of lattice mismatch inducing the instability of ulreathin nanostructures during phase transformations is still a critical challenge. Herein, we describe a facile and scalable strategy for the growth of ultrathin nickel phosphide (Ni₂P) nanosheets (NSs) with exposed (001) facets. We show that single‐layer functionalized graphene with residual oxygen‐containing groups and a large lateral size contributes to reducing the lattice strain during phosphorization. The resulting nanostructure exhibits remarkable hydrogen evolution activity and good stability under alkaline conditions.     

Multilayer Assemblies Consisting of Tri‐Vanadium‐Substituted Heteropolyanions and Its Electrocatalytic Properties

We describe the controlled fabrication of ultrathin multilayer films consisting of tri‐vanadium‐ substituted heteropolytungstate anions (denoted as P₂W₁₅V₃) and a cationic polymer of quaternized poly (4‐vinylpyridine) partially complexed with osmium bis(2,2′‐bipyridine) (denoted as QPVP‐Os) on the 4‐aminobenzoic acid (4‐ABA) modified glassy carbon electrode (GCE) surface based on layer‐by‐layer assembly. Cyclic voltammetry and UV‐vis absorption spectrometry have been used to easily monitor the thickness and uniformity of thus‐formed multilayer films. The V‐centered redox reaction of P₂W₁₅V₃ in the multilayer films can effectively catalyze the reduction of BrO and NO . The resulting P₂W₁₅V₃/QPVP‐Os multilayer film modified electrode behaves as a much promising electrochemical sensor because of the low overpotential for the catalytic reduction of BrO and NO , and the catalytic oxidation of ascorbic acid.     

Topochemical Synthesis of Two‐Dimensional Transition‐Metal Phosphides Using Phosphorene Templates

Transition‐metal phosphides (TMPs) have emerged as a fascinating class of narrow‐gap semiconductors and electrocatalysts. However, they are intrinsic nonlayered materials that cannot be delaminated into two‐dimensional (2D) sheets. Here, we demonstrate a general bottom‐up topochemical strategy to synthesize a series of 2D TMPs (e.g. Co₂P, Ni₁₂P₅, and Co_xFe_2?xP) by using phosphorene sheets as the phosphorus precursors and 2D templates. Notably, 2D Co₂P is a p‐type semiconductor, with a hole mobility of 20.8 cm² V^?1 s^?1 at 300 K in field‐effect transistors. It also behaves as a promising electrocatalyst for the oxygen evolution reaction (OER), thanks to the charge‐transport modulation and improved surface exposure. In particular, iron‐doped Co₂P (i.e. Co_1.5Fe_0.5P) delivers a low overpotential of only 278 mV at a current density of 10 mA cm^?2 that outperforms the commercial Ir/C benchmark (304 mV).     

In Situ Confined Growth Based on a Self‐Templating Reduction Strategy of Highly Dispersed Ni Nanoparticles in Hierarchical Yolk–Shell Fe@SiO2 Structures as Efficient Catalysts

Ni‐based magnetic catalysts exhibit moderate activity, low cost, and magnetic reusability in hydrogenation reactions. However, Ni nanoparticles anchored on magnetic supports commonly suffer from undesirable agglomeration during catalytic reactions due to the relatively weak affinity of the magnetic support for the Ni nanoparticles. A hierarchical yolk–shell Fe@SiO₂/Ni catalyst, with an inner movable Fe core and an ultrathin SiO₂/Ni shell composed of nanosheets, was synthesized in a self‐templating reduction strategy with a hierarchical yolk–shell Fe₃O₄@nickel silicate nanocomposite as the precursor. The spatial confinement of highly dispersed Ni nanoparticles with a mean size of 4 nm within ultrathin SiO₂ nanosheets with a thickness of 2.6 nm not only prevented their agglomeration during catalytic transformations but also exposed the abundant active Ni sites to reactants. Moreover, the large inner cavities and interlayer spaces between the assembled ultrathin SiO₂/Ni nanosheets provided suitable mesoporous channels for diffusion of the reactants towards the active sites. As expected, the Fe@SiO₂/Ni catalyst displayed high activity, high stability, and magnetic recoverability for the reduction of nitroaromatic compounds. In particular, the Ni‐based catalyst in the conversion of 4‐nitroamine maintained a rate of over 98 % and preserved the initial yolk–shell structure without any obvious aggregation of Ni nanoparticles after ten catalytic cycles, which confirmed the high structural stability of the Ni‐based catalyst.     

One‐stage Template‐free KOH Activation for Mesopore‐enriched Carbons and Their Application in CO2 Capture

Activated carbons with a high mesoporous structure were prepared by a one‐stage KOH activation process without the assistance of templates and further used as adsorbents for CO₂ capture. The physical and chemical properties as well as the pore structures of the resulting mesoporous carbons were characterized by N₂ adsorption isotherms, scanning electron microscopy (SEM ), X‐ray diffraction (XRD ), Raman spectroscopy, and Fourier transform infrared (FTIR ) spectroscopy. The activated carbon showed greater specific surface area and mesopore volume as the activation temperature was increased up to 600°C, showing a uniform pore structure, great surface area (up to ~815 m²/g), and high mesopore ratio (~55%). The activated sample exhibited competitive CO₂ adsorption capacities at 1 atm pressure, reaching 2.29 and 3.4 mmol/g at 25 and 0°C, respectively. This study highlights the potential of well‐designed mesoporous carbon as an adsorbent for CO₂ removal and widespread gas adsorption applications.     

Size Fractionation of Two‐Dimensional Sub‐Nanometer Thin Manganese Dioxide Crystals towards Superior Urea Electrocatalytic Conversion

A universal technique has been proposed to sort two‐dimensional (2D) sub‐nanometer thin crystals (manganese dioxide MnO₂ and molybdenum disulfide MoS₂) according to their lateral dimensions. This technique is based on tuning the zeta potential of their aqueous dispersions which induces the selective sedimentation of large‐sized 2D crystals and leaves the small‐sized counterparts in suspension. The electrocatalytic properties of as‐obtained 2D ultrathin crystals are strongly dependent on their lateral size. As a proof‐of‐concept study, the small‐sized MnO₂ nanocrystals were tested as the electrocatalysts for the urea‐oxidation reaction (UOR), which showed outstanding performance in both half reaction and full electrolytic cell. A mechanism study reveals the enhanced performance is associated with the remarkable structural properties of MnO₂ including ultrathin (ca. 0.95 nm), laterally small‐sized (50–200 nm), and highly exposed active centers.     

Liquid‐Phase Epitaxial Growth of Two‐Dimensional Semiconductor Hetero‐nanostructures

Although many two‐dimensional (2D) hybrid nanostructures are being prepared, the engineering of epitaxial 2D semiconductor hetero‐nanostructures in the liquid phase still remains a challenge. The preparation of 2D semiconductor hetero‐nanostructures by epitaxial growth of metal sulfide nanocrystals, including CuS, ZnS and Ni₃S₂, is achieved on ultrathin TiS₂ nanosheets by a simple electrochemical approach by using the TiS₂ crystal and metal foils. Ultrathin CuS nanoplates that are 50–120 nm in size and have a triangular/hexagonal shape are epitaxially grown on TiS₂ nanosheets with perfect epitaxial alignment. ZnS and Ni₃S₂ nanoplates can be also epitaxially grown on TiS₂ nanosheets. As a proof‐of‐concept application, the obtained 2D CuS–TiS₂ composite is used as the anode in a lithium ion battery, which exhibits a high capacity and excellent cycling stability.     

Cross‐Linked Polyphosphazene Hollow Nanosphere‐Derived N/P‐Doped Porous Carbon with Single Nonprecious Metal Atoms for the Oxygen Reduction Reaction

Heteroatom‐doped polymers or carbon nanospheres have attracted broad research interest. However, rational synthesis of these nanospheres with controllable properties is still a great challenge. Herein, we develop a template‐free approach to construct cross‐linked polyphosphazene nanospheres with tunable hollow structures. As comonomers, hexachlorocyclotriphosphazene provides N and P atoms, tannic acid can coordinate with metal ions, and the replaceable third comonomer can endow the materials with various properties. After carbonization, N/P‐doped mesoporous carbon nanospheres were obtained with small particle size (≈50 nm) and high surface area (411.60 m² g^?1). Structural characterization confirmed uniform dispersion of the single atom transition metal sites (i.e., Co‐N₂P₂) with N and P dual coordination. Electrochemical measurements and theoretical simulations revealed the oxygen reduction reaction performance. This work provides a solution for fabricating diverse heteroatom‐containing polymer nanospheres and their derived single metal atom doped carbon catalysts.     

Synthesis of Mesoporous TiO2/SiO2 Hybrid Films as an Efficient Photocatalyst by Polymeric Micelle Assembly

Thermally stable mesoporous TiO₂/SiO₂ hybrid films with pore size of 50 nm have been synthesized by adopting the polymeric micelle‐assembly method. A triblock copolymer, poly(styrene‐b‐2‐vinyl pyridine‐b‐ethylene oxide), which serves as a template for the mesopores, was utilized to form polymeric micelles. The effective interaction of titanium tetraisopropoxide (TTIP) and tetraethyl orthosilicate (TEOS) with the polymeric micelles enabled us to fabricate stable mesoporous films. By changing the molar ratio of TEOS and TTIP, several mesoporous TiO₂/SiO₂ hybrid films with different compositions can be synthesized. The presence of amorphous SiO₂ phase effectively retards the growth of anatase TiO₂ crystal in the pore walls and retains the original mesoporous structure, even at higher temperature (650 °C). These TiO₂/SiO₂ hybrid films are of very high quality, without any cracks or voids. The addition of SiO₂ phase to mesoporous TiO₂ films not only adsorbs more organic dyes, but also significantly enhances the photocatalytic activity compared to mesoporous pure TiO₂ film without SiO₂ phase.     

Easy and General Synthesis of Large‐Sized Mesoporous Rare‐Earth Oxide Thin Films by ′Micelle Assembly′

Large‐sized (ca. 40 nm) mesoporous Er₂O₃ thin films are synthesized by using a triblock copolymer poly(styrene‐b‐2‐vinyl pyridine‐b‐ethylene oxide) (PS‐b‐P2VP‐b‐PEO) as a pore directing agent. Each block makes different contributions and the molar ratio of PVP/Er³⁺ is crucial to guide the resultant mesoporous structure. An easy and general method is proposed and used to prepare a series of mesoporous rare‐earth oxide (Sm₂O₃, Dy₂O₃, Tb₂O₃, Ho₂O₃, Yb₂O₃, and Lu₂O₃) thin films with potential uses in electronics and optical devices.