铜催化格氏试剂的不对称烯丙基烷基化连续流反应（英文）

基于连续流微通道反应器,在温和条件下首次实现了铜催化格氏试剂的不对称烯丙基烷基化反应.在-20～-10℃条件下,用双流路不锈钢折线型连续流微通道反应器,以极短的保留时间0.6 s,实现了铜催化的不同格氏试剂的不对称烯丙基烷基化反应,获得的产物收率为82%～99%, ee值中等至良好.此外,在连续流反应条件下连续进料34min,放大(S)-3-甲基-1-环己烯的合成规模,获得0.968 g的(S)-3-甲基-1-环己烯,收率为98.7%, ee值为96.6%,证明了在连续流条件下铜催化剂可以稳定地催化格氏试剂发生不对称烯丙基烷基化反应.     

天然5,7-二羟基-3-异戊烯基黄酮与5-羟基-3-异戊烯基黄酮的全合成

以2,4,6-三羟基苯乙酮和2,6-二羟基苯乙酮为原料, 分别通过甲基保护酚羟基、 苯甲酰氯酰化、 Bake-Venkataraman重排、 异戊烯基化、 酸催化关环及EtSLi脱去甲基等6步反应, 以高收率完成了天然5,7-二羟基-3-异戊烯基黄酮(1a, 收率80.6%)和5-羟基-3-异戊烯基黄酮(1b, 收率84.9%)的全合成, 所有化合物均经 ¹H NMR 和 ¹³C NMR表征确定. 通过密度泛函理论方法对目标产物(1a和1b)的生物活性进行了预测. 结果表明, 3位异戊烯基侧链的存在能大大增强化合物相应的生物活性, 而且是化合物生物活性增强必需的取代基. 另外, 目标产物1a的生物活性高于产物1b, 归因于黄酮类化合物分子中A环上的7-OH属增效基团, 起到增强生物活性的作用, 化合物1a分子中A环上有7-OH, 而化合物1b分子中则无该基团. 本合成方法对其它3-烃基黄酮类天然化合物的合成具有潜在的适用性, 所预测的生物活性结果为3-烃基黄酮类化合物的构效关系研究奠定了基础.     

4,4′-联苯二甲酸合成工艺研究

以医药中间体合成过程中产生的副产物4,4′-二甲基联苯为原料,经氯代反应生成4,4′-双(三氯甲基)联苯,然后水解制得4,4′-联苯二甲酸;对氯代反应的历程进行了探讨,并通过正交实验考察了反应参数对4,4′-联苯二甲酸收率的影响,得到了优化工艺条件,优化工艺条件下的验证实验表明:反应总收率达到93.40%,纯度达99.20%。采用IR、~1HNMR对产物的结构进行表征,通过HPLC对生成的4,4′-联苯二甲酸的纯度进行测定。该合成工艺具有环境友好、工艺操作简单、转化率及收率高、经济性好等优点,适合工业化大规模生产。     

脐橙皮中黄酮类化合物与果胶的分离和提取研究

黄酮类化合物是具备主要生物活性的天然产物,果胶是人体7大营养素中膳食纤维的主要成分.实验就黄酮和果胶提取分别作L9(34)和L16(44)正交化实验.工艺条件表明,提取黄酮的较佳工艺条件是:固液比1∶30,超声处理时间55 min,处理温度50℃,浸提液浓缩得到粗黄酮.提取黄酮后的脐橙皮渣中提取果胶的较佳工艺条件是:70℃的温度,提取时间为55 min,pH=2.0,固液提取比为1∶25.     

苯基脲与甲醇合成苯氨基甲酸甲酯的研究

采用苯基脲与甲醇反应合成了苯氨基甲酸甲酯,考察了不同催化剂、原料配比及反应工艺条件的影响,确定了适宜的合成条件,并根据产物分布对催化反应机理进行了初步探讨.结果表明,以PbO为催化剂,于140℃反应4h后,苯基脲转化率为95.2%,苯氨基甲酸甲酯收率为80.6%.     

微波辅助法合成新黄酮类化合物骨架

探索了一种新黄酮类化合物骨架的新的合成方法,以取代苯甲醛和丙二酸为起始原料,在哌啶的催化下生成取代苯基丙烯酸衍生物;采用微波辅助的方法,以三氟乙酸为溶剂,取代苯基丙烯酸衍生物和苯酚类化合物反应合成了新黄酮类化合物;研究了微波反应功率、反应时间等因素对产物收率的影响,并确定了优化反应条件.在最优条件下,以61%~85%的收率得到6种含不同取代基的新黄酮类化合物骨架.用MS、IR和1H-NMR对目标产物的结构进行了表征.     

醚化剂GTA的合成及在制备阳离子聚乙烯醇中的应用

以三甲胺(TMA)和环氧氯丙烷(EPIC)为原料,超声条件下合成了醚化剂失水甘油基三甲基氯化铵(GTA),研究了物料配比、反应温度、反应时间对产物收率的影响,确定GTA最优合成工艺条件:n(TMA)∶n(EPIC)=2∶1,反应温度20℃,反应时间4 h,此条件下产物收率72%。用该中间体在碱性条件下对聚乙烯醇进行改性,可制得季铵盐型阳离子聚乙烯醇膜材料,通过正交实验确定季铵盐型阳离子聚乙烯醇最优合成工艺条件:n(GTA)∶n(PVA)=2∶1,反应温度60~70℃,反应时间5 h,p H为10,终产物收率88%。     

连续流微反应器中CuCN-TsOH催化合成2-芳基-4,5-二氢-1H-咪唑啉

应用连续流微反应器,以Cu CN-Ts OH为催化剂,通过腈和乙二胺反应合成了一系列2-咪唑啉类化合物.催化剂Cu CN-Ts OH在乙二胺中溶解成均相,适用于连续化反应条件.在连续流条件下,只需5 min就可以高产率得到2-咪唑啉产物.利用连续流反应器实现了"在线保留时间梯度(in-tube retention time gradient,IT-RTG)",并应用于监测反应进程.     

柚皮苷半合成生物活性黄酮醇和橙酮类化合物研究

以柚皮苷为原料,经过糖苷水解、脱氢、苄基保护、O-甲基化、过氧丙酮(DMDO)氧化或阿尔格-弗林-大山田(Algar-Flynn-Oyamada)反应和脱苄基保护等反应步骤,半合成了山萘酚(1,Kaemferol),5,7,4’-三甲氧基黄酮醇(2)、3,5-二羟基-7,4’-二甲氧基黄酮醇(3),鼠李柠檬素(4,Rhamnocitrin)等4种天然黄酮醇类和4,6,4’-三羟基二氢橙酮(5)、4-羟基-6,4’-二甲氧基二氢橙酮(6)两种新的橙酮类化合物.重点探讨了过氧丙酮(DMDO)直接氧化黄酮制备黄酮醇和Algar-Flynn-Oyamada反应制备橙酮的合成方法,改进优化了反应条件.所有合成化合物的结构已通过1H NMR,MS和IR等波谱方法进行了确认.该合成途径原料易得,工艺简便,收率较高,具有较高的应用价值.     

CRBN调节剂Avadomide的合成工艺优化

Avadomide是处于Ⅱ期临床阶段用于治疗晚期实体瘤的潜在药物,本文对其合成工艺进行了研究,并对重要中间体的合成工艺进行了优化。以3-硝基邻苯二甲酰亚胺为起始原料,依次经开环、霍夫曼降解、环化、酯的氨解反应、氢氧化钯/碳加氢还原反应得到Avadomide,总收率为46.9%,产物结构经~1H NMR、~(13)C NMR和HRMS表征,纯度经HPLC检测为99.5%。优化后的工艺路线具有反应条件温和、后处理简单、产率高、可操作性强等特点,更适合Avadomide的工业化生产。     

A straightforward access to neohesperidose from naringin by acetolysis. Comparative behaviour of some flavonoid neohesperidosides and rutinosides under acetolysis

A straightforward semisynthesis of neohesperidose was performed in three-steps with 43% overall yield starting from naringin, the main flavonoid of grapefruit. In addition, the behaviour of two pairs of flavonoid 7-O-rhamnoglucosides (neohesperidosides naringin and rhoifolin; rutinosides hesperidin and diosmin) under same acetolysis conditions was compared. Results demonstrated the crucial influence of the oxidation state of the aglycone (flavanone or flavone), and of the nature of the disaccharidic moiety on the course of the reaction.     

Highly productive droplet formation by anisotropic elongation of a thread flow in a microchannel

We developed a microfluidic device to form monodisperse droplets with high productivity by anisotropic elongation of a thread flow, defined as a threadlike flow of a dispersed liquid phase in a flow of an immiscible, continuous liquid phase. The thread flow was anisotropically elongated in the depth direction in a straight microchannel with a step, where the microchannel depth changed. Consequently, the elongated thread flow was given capillary instability (Rayleigh-Plateau instability) and was continuously transformed into monodisperse droplets at the downstream area of the step in the microchannel. We examined the effects of the flow rates of the dispersed phase and the continuous phase on the droplet formation behavior, including the droplet diameter and droplet formation frequency. The droplet diameter increased as the fraction of the dispersed-phase flow rate relative to the total flow rate increased and was independent of the total flow rate. The droplet formation frequency proportionally increased with the total flow rate at a constant dispersed-phase flow rate fraction. These results are explained in terms of a mechanism similar to that of droplet formation from a cylindrical liquid thread flow by Rayleigh-Plateau instability. The microfluidic device described was capable of forming monodisperse droplets with a 160-microm average diameter and 3-microm standard deviation at a droplet formation frequency of 350 droplets per second from a single thread flow. The highest total flow rate achieved was 6 mL/h using the present device composed of a straight microchannel with a step. We also demonstrated parallel droplet formation by anisotropic elongation of multiple thread flows; the process was applied to form W/O and O/W droplets. The highly productive droplet formation process presented in this study is expected to be useful for future industrial applications.     

Lab on a chip packing of submicron particles for high performance EOF pumping

The packing of submicrometer sized silica beads inside a microchannel was enabled by a novel method which avoids the complication and limitations of generating a frit using conventional approaches and the restriction of flow using a submicrometer sized weir. A micrometer sized weir and two short columns of 5 μm and 800 nm silica beads packed in succession behind the weir together functioned as a high pressure frit to allow the construction of a primary packed bed of 390 nm silica beads. This packed bed microchannel was tested as an EOF pump, wherein it exhibited superior performance with regards to pressure tolerance, i.e., sustaining good flow rate under extremely high back pressure, and maximal pressure generation. Under a modest applied electric field strength of 150 V/cm, the flow rate against a back pressure of 1200 psi (～8.3 MPa) was 40 nL/min, and the maximal pressure reached 1470 psi (～10 MPa). This work has demonstrated that it is possible to create a high performance packed bed microchannel EOF pump using nanometer sized silica beads, as long as proper care is taken during the packing process to minimize the undesirable mixing of two different sized particles at the boundaries between particle segments and to maximize the packing density throughout the entire packed bed.     

Decomposition of Chloromethanes in Gliding Discharges

Gliding discharge plasma was used for decomposition of tetrachloromethane and trichloromethane. Air containing 8000 ppm or 20 ppm of water vapor was the carrier gas. The course and yield of the process were studied as a function of initial concentration of tetrachloromethane and trichloromethane, gas flow rate, and water vapor content. The conversion was high in all cases—it reached 90% for tetrachloromethane and 100% for trichloromethane. The conversion rate of the chloromethane compounds increased with increasing initial concentration of these compounds in the reaction mixture. Changing the water vapor content in the reaction mixture from 20 ppm to 8000 ppm increased the conversion rate of chloromethanes.     

Simultaneous determination of the flavonoid aglycones diosmetin and hesperetin in human plasma and urine by a validated GC/MS method: in vivo metabolic reduction of diosmetin to hesperetin

Diosmetin and hesperetin are the aglycones of the flavonoid glycosides diosmin and hesperidin which occur naturally in citrus fruit. A GC/MS method for the simultaneous determination of diosmetin and hesperetin in human plasma and urine has been developed and validated. The method was linear in the 2-300 ng/mL concentration range for both diosmetin and hesperetin in plasma and urine (r > 0.999). The precision of the method was better than 6.01 and 7.16% for diosmetin and hesperetin, respectively, and the accuracy was 96.76-100.40% and 95.00-105.50% for diosmetin and hesperetin, respectively. The lower limit of quantitation was found to be 2 ng/mL for both analytes in plasma and urine. Recovery of diosmetin, hesperetin and internal standard naringenin was greater than 82.5%. The method has been applied for the determination of diosmetin and hesperetin in plasma and urine samples obtained from a healthy male subject following a single oral 1000 mg dose of the flavonoid glycoside diosmin. The presence of hesperetin in plasma and urine samples indicates the metabolic reduction of diosmetin to its flavanone analogue hesperetin through reduction of the 2,3 double bond of the C-ring by the enzymes of bacteria of the intestinal microflora.     

Optimization of Ultrasound Assisted Extraction of Bioactive Compounds from Apple Pomace

In the present work, the optimization of the extraction of antioxidant compounds from apple pomace using ultrasound technology as an environmentally friendly and intensification process was developed. Different sonication powers, extraction temperatures and extraction times were studied and their influence on extraction yield and characteristics of the extracted samples (total phenolic compounds, flavonoid content and antioxidant capacity) are presented. The elaborated experimental design and the analysis of Pareto and response surface diagrams allowed us to determine the optimal extraction conditions. The conditions that allow the maximum extraction of phenolic compounds were found at 20 min, 90 °C and 50% ultrasound amplitude. Nevertheless, at these conditions, the antioxidant capacity measured by DPPH decreased in the extracted samples.     

T型微通道装置制备单分散PLGA微球

利用微通道法乳化技术原理,研制了一个可拆卸T型玻璃微通道装置,以聚乙烯醇水溶液为连续相,聚(乳酸-co-羟基乙酸)(PLGA)的二氯甲烷溶液为分散相,制备了单分散的PLGA微球.考察了乳化剂用量、连续相和分散相流速以及PLGA浓度对形成的液滴平均粒径和变异系数(CV值)的影响.结果表明,增大乳化剂用量,提高连续相流速或降低分散相流速,制备得到的PLGA微球直径减小;分散相浓度在5～20 g/L之间变化时,其对微球直径的影响有限.PLGA微球表面光滑无孔,且内部是实心的.用本装置制备得到的PLGA微球,其粒径范围在30～200μm之间,CV值在15%以下,最低可至3%.该方法可使用挥发性有机溶剂作为分散相而且能避免微球制备时易堵塞等问题,可应用于药物缓控释领域中微米级单分散微球的制备.     

Continuous monitoring with microfabricated capillary electrophoresis chip devices

We report on the direct coupling of hydrodynamically flowing stream to a microchip capillary electrophoresis (CE) for continuous assays of liquid samples. The new interface relies on mounting the sample tubing onto a sharp inlet tip and allows rapid, convenient and reproducible electrokinetic loading from a continuously flowing stream directly into the narrow separation microchannel. The sharp inlet interface is characterized by its efficiency, stability and simplicity. The effect of the sample flow rate, applied voltages and other relevant variables, is described. It was found that the peak intensity is independent of the flow rate. The performance of the new interface is illustrated for on-line CE-electrochemical monitoring of phenolic and explosive compounds. Conditions simulating continuous long-term monitoring, led to a highly stable response for a 15 ppm 1,3,5-trinitrobenzene solution (RSD = 3.7%, n= 40). Such ability to continuously introduce flowing samples into micrometer channels makes 'lab-on-a-chip' devices highly compatible with real-life monitoring applications.     

Effect of viscoelasticity on the flow pattern and the volumetric flow rate in electroosmotic flows through a microchannel

Many lab-on-a-chip based microsystems process biofluids such as blood and DNA solutions. These fluids are viscoelastic and show extraordinary flow behaviors, not existing in Newtonian fluids. Adopting appropriate constitutive equations these exotic flow behaviors can be modeled and predicted reasonably using various numerical methods. In the present paper, we investigate viscoelastic electroosmotic flows through a rectangular straight microchannel with and without pressure gradient. It is shown that the volumetric flow rates of viscoelastic fluids are significantly different from those of Newtonian fluids under the same external electric field and pressure gradient. Moreover, when pressure gradient is imposed on the microchannel there appear appreciable secondary flows in the viscoelastic fluids, which is never possible for Newtonian laminar flows through straight microchannels. The retarded or enhanced volumetric flow rates and secondary flows affect dispersion of solutes in the microchannel nontrivially.     

耦合氧化吸附脱除燃油中硫化物的研究

运用氧化-吸附耦合技术,将硫化物氧化为极性较高的砜类.利用中孔硅胶选择性吸附残留于油品中的硫化物及少量水,水分子和硫化物竞争吸附作用导致改性硅胶脱硫率降低.较适宜的脱硫条件是:过氧乙酸/柴油质量比2:1、反应时间80 min、搅拌速度200 r/min、反应温度60℃,此条件下脱硫率可达到97.5%.与加氢工艺相比,此...