分子烙印聚合物固定相分离咖啡因和茶碱的研究

分子烙印是一种新兴的分子识别技术,利用该技术可制备对烙印分子具有“预定”识别能力的高分子聚合物,即分子烙印聚合物（MIP）,从而可以对性质和组成相近的组如对映体等进行分离^[1,2],咖啡因与茶碱的分子烙印聚合物的制备以及二者分析已有报道^[3-9],但存在两种完全相反的结论。一种观点认为,即使以咖啡因为烙印分子,所制备的聚合物对咖啡因分子的选择性吸附能力也小于茶碱^[3-6]。而另一种观点则认为,在一定条件下,如以咖啡因分子为烙印分子的烙印聚合物对咖啡因分子具有更强的吸附能力^[7-9]。本文分别采用茶碱和咖啡因作为烙印分子,以甲基丙烯酸等为功能单体,在不同条件下制备了多种非共价型分子烙印聚合物,并系统地考察了其作 为HPLC固定相对咖啡因和茶碱的分离能力,同时也对烙印分子应具备的条件加以探讨。     

Synthesis of zirconia monoliths for chromatographic separations

The aim of this work is to join the advantages of two different kinds of stationary phases: monolithic columns and zirconia-based supports. On the one hand, silica monolithic columns allow a higher efficiency with a lower back-pressure than traditional packed columns. On the other hand, chromatographic stationary phases based on zirconia have a higher thermal and chemical stability and specific surface properties. Combining these advantages, a zirconia monolith with a macroporous framework could be a real improvement in separation sciences. Two main strategies can be used in order to obtain a zirconia surface on a monolithic skeleton: coating or direct synthesis. The coverage by a zirconia layer of the surface of a silica-based monolith can be performed using the chemical properties of the silanol surface groups. We realized this coverage using zirconium alkoxide and we further grafted n-dodecyl groups using phosphate derivatives. Any loss of efficiency was observed and fast separations have been achieved. The main advance reported in this paper is related to the preparation of zirconia monoliths by a sol-gel process starting from zirconium alkoxide. The synthesis parameters (hydrolysis ratio, porogen type, precursor concentration, drying step, etc.) were defined in order to produce a macroporous zirconia monoliths usable in separation techniques. We produced various homogeneous structures: zirconia rod 2 cm long with a diameter of 2.3 mm, and zirconia monolith inside fused silica capillaries with a 75 microm I.D. These monoliths have a skeleton size of 2 microm and have an average through pore size of 6 microm. Several separations have been reported.     

Comparison of Different Silica-Based Imidazolium Stationary Phases for LC in Separation of Alkaloids

Three stationary phases based on silica modified with imidazolium ionic liquids were prepared and characterized for their use in high-performance liquid chromatography. Multiple interactions of separation mechanism of the three stationary phases were studied by using caffeine, theophylline and theobromine. The comparison of differential retentions was established and the hydrophobic interaction of the alkylimidazolium groups showed stronger impact than other interactions in separation of alkaloids. The effects of temperatures and different concentrations of additives in eluent were also investigated. Furthermore, the study of retention mechanism was used to predict the order of elution of cytosine, thymine and guanine successfully.     

Ground, sieved, and C18 modified monolithic silica particles for packing material of microcolumn high-performance liquid chromatography

We here report a new type of stationary phase for microcolumns. C18 modified silica monolith particles were prepared by grinding and sieving the silica monolith followed by C18 modification and end-capping, and were used as packing material. Ground silica monolith particles were not spherical but irregular with some residual monolithic network structure. The separation efficiency of the stationary phase made of sieved monolith particles (5-10 microm) was better than that of the stationary phase made of unsieved particles. The microcolumn packed with the sieved C18 ground monolith particles (5-10 microm) showed quite good separation efficiency (height equivalent to theoretical plate, HETP, as low as 15 microm) and it was even superior to the microcolumn packed with a commercial spherical 5 microm C18 stationary phase. The column pressure drop of C18 monolith particles was about two-third of that of the commercial spherical C18 phase. The preparation method of C18 stationary phase with ground and sieved silica monolith particles presumably suggests advantages of simplicity and convenience in modification and washing procedures compared to bulk silica monolith. It also showed both improved separation efficiency and low back pressure.     

Silica‐based zwitterionic monolithic stationary phase for separation of neutral and ionized solutes using pressurized CEC

A porous zwitterionic monolith was prepared by in situ covalent attachment of lysine to a γ‐glycidoxypropyltrimethosysilane‐modified silica monolith. The prepared column was used to perform neutral and ionized solutes separations by pressurized (pCEC). Due to the zwitterionic nature of the resulting stationary phase, the monolithic column provided both electrostatic attraction and repulsion sites for electrochromatographic retention for ionized solutes. Separation of several nucleotides was investigated on the monolithic column. It was shown that the nucleotides could be separated based on hydrophilic and electrostatic interactions between the stationary phase and analyte. Besides, the separation property of the zwitterionic silica monolith was compared with the use of diamine‐bonded silica monolith as stationary phase. As expected, the lysine monolith exhibited a lower retention for the five nucleotides, which was due to the dissociation of the external carboxylic acid groups, leading to electrostatic repulsion with negatively charged solutes. Under the same experimental conditions, separation of the five nucleotides on the zwitterionic column was in less than 8 min, while that on the diamine column was in approximately 60 min.     

Preparation and chromatographic evaluation of new branch-type diamide-embedded octadecyl stationary phase with enhanced shape selectivity

A novel branch-type diamide-embedded octadecyl stationary phase was prepared by facile amidation. The preparation of this new phase involves the synthesis of new bifunctional silane ligand and surface modification of spherical silica via anchoring of silane coupling agent. The obtained diamide-embedded octadecyl stationary phase demonstrated excellent hydrophobic selectivity, as well as enhanced shape and planarity selectivity in comparison to commercial polymeric and monomeric C₁₈ phases, respectively, as revealed by the systematic investigation into its liquid chromatographic retention of isomeric polycyclic aromatic hydrocarbons. The applicability of this new stationary phase was further testified by the effective separation of isomeric compounds belong to different chemical classes, including chain isomers of alkylbenzenes, and positional isomers of substituted aromatics. An in-depth analysis of the separation mechanisms other than molecular shape recognition involved in the new stationary phase was performed using a linear solvation energy relationships model and compared with its monoamide and pure C₁₈ counterparts correspondingly. The performance of the new stationary phase in quantitative analysis of phenols from real-world samples was also evaluated.     

Titania-based stationary phase in separation of ondansetron and its related compounds

Improvements in stationary phase stability have been and remain a great task for research of new stationary phases. Metal oxide-based stationary phases appear as one of perspective alternatives to classical silica based stationary phases regarding to their similar effectiveness, different selectivity, different retention mechanism and mainly better chemical and thermal stability. In this study, the retention behaviour of ondansetron and its five pharmacopoeial impurities on TiO(2)-based reversed phase was investigated. The influence of buffer type, pH and concentration on retention was studied. Different types and amount of organic solvent in mobile phase were tested. The effect of temperature and flow rate on separation was investigated. The separation conditions were optimized and developed method validated. The retention parameters - retention time (t(R)), retention factor (k'), theoretical plate number (N), resolution between peaks due to nearby peaks (R(s)) and symmetry factor (A(s)) have been compared to parameters achieved on polybutadiene-coated zirconia column. The thermodynamic parameters of retention of analysed compounds - enthalpy, entropy and Gibbs free energy - were calculated and compared to those achieved on polybutadiene-coated zirconia column. This work proves similarity of retention behaviour of ondansetron and its five related compounds on zirconia-based and titania-based stationary phases and potential utilisation of polyethylene covered TiO(2)-based reversed stationary phase as an alternative to polybutadiene-coated ZrO(2) stationary phase in pharmaceutical analysis of ondansetron.     

Preparation and characterization of phosphatidylcholine‐coated zirconia–magnesia stationary phase for artificial membrane chromatography

Immobilized artificial membrane chromatography stationary phase was prepared by coating soybean phosphatidylcholine (PC) on zirconia–magnesia micro‐particles. The stability and chromatographic properties were investigated and compared with the PC‐coated silica chromatography stationary phase prepared by the same method. PC‐coated zirconia–magnesia chromatography stationary phase was more stable than the silica especially on resisting organic solvents. Hydrophobic action was the main factor for the retention of analyte on the new artificial membrane chromatography stationary phase, and electrostatic interaction had some contribution to retention. In addition, the special interaction between analyte and matrix affected retention greatly. Basic solutes were appropriate to be analyzed on PC‐coated zirconia–magnesia stationary phase and acidic solutes were appropriate to be done on the silica one. Hence, the two different matrices artificial membrane stationary phases were perfectly complementary.     

氮杂冠醚、环糊精混合功能基键合硅胶液相色谱固定相的合成与评价

冠醚键合固定相主要用于一些无机离子的分离,我们用连续固液相法合成了一系列冠醚键合硅胶固定相,并成功地用于有机化合物的分离［１～４］;β－ＣＤ的内腔疏水而外缘亲水,可以选择性地包结含苯环及萘环的化合物,且具有手性拆分能力,已被用于手性色谱固定相［５,...     

Laterally attached liquid-crystalline polymers as stationary phases. Effect of temperature in RP HPLC and comparison with a commercial C18 stationary phase

Summary Specific side-on-fixed liquid-crystalline polymers (SOLCP) have been synthesized for use in silica-modified stationary phases in high-performance liquid chromatography (HPLC). The mesogenic side group of the SOLCP is composed of three benzoate-type phenyl rings with terminal alkoxy chains and is laterally linked to a polysiloxane backbone via an alkyl ester spacer arm. The dependence of the logarithm of the retention factor on the reciprocal temperature showed that the liquid-crystalline anisotropic order was conserved in the small pores (200 ? diameter) of the silica gel. The first-order nematic-isotropic transition is lost and probably becomes second-order. Adsorption enthalpies for the liquid-crystalline stationary phases have been measurement for three polycyclic aromatic hydrocarbon isomers (ortho-terphenyl, triphenylene, and chrysene) and compared with those for a commercial C₁₈ phase. The adsorption enthalpies never exceeded 30 kJ mol⁻¹, i.e. ten times the thermal agitation energy,RT. They were always less on the SOLCP stationary phase than on the C₁₈ column, emphasizing the more rigid structure of the liquid crystalline phase and its mechanism based upon adsorption. Better separation of steroids, pesticides and amino acids were obtained with the LCP-coated silica than the commercial bonded C₁₈ column. Four small peptides were successfully separated by using pure water as mobile phase.     

Improvement of proline chiral stationary phases by varying peptide length and linker

Seven new stationary phases with different number of proline units and/or different linkage to silica gel were prepared and evaluated in order to improve the performance of proline chiral stationary phases. The average separation factor achieved with the 53 analytes increases with the number of proline units in the stationary phases. When the proline peptides are directly attached to the 3-methylaminopropyl silica gel without using the 6-methylaminohexanoic acid linker, the stationary phases perform better overall. For decaproline chiral stationary phase 8, the separation also depends on the mobile phase system used. For this stationary phase, the CH2Cl2/hexanes/2-propanol system significantly outperforms the 2-propanol/hexanes system. For the 53 analytes tested, the separation factors achieved with this stationary phase compare well with those for three commercial columns.     

Separation behavior of basic compounds on unbonded silicon oxynitride and silica high‐performance liquid chromatography stationary phases with reversed‐phase eluents

Unbonded silicon oxynitride and silica high‐performance liquid chromatography stationary phases have been evaluated and compared for the separation of basic compounds of differing molecular weight, pK_a, and log D using aqueous/organic mobile phases. The influences of percentage of organic modifier, buffer pH, and concentration in the mobile phase on base retention were investigated on unbonded silicon oxynitride and silica phases. The results confirmed that unbonded silicon oxynitride and silica phases demonstrated excellent separation performance for model basic compounds and both the unbonded phases examined possessed a hydrophobic/adsorption and ion‐exchange character. The silicon oxynitride stationary phase exhibited high hydrophilicity compared with silica with a reversed‐phase mobile phase. An ion‐exclusion‐type mechanism becomes predominant for the separation of three aimed bases on the silicon oxynitride column at pH 2.8. Different from silicon oxynitride stationary phase, no obvious change for the retention time of three model bases on silica stationary phase at pH 2.8 can be observed.     

Factors affecting the reversed-phase liquid chromatographic separation of polycyclic aromatic hydrocarbon isomers

Reversed-phase liquid chromatography (LC) on C₁₈ stationary phases provides excellent selectivity for the separation of polycyclic aromatic hydrocarbons (PAH). Recent studies have shown that several factors affect selectivity for the LC separation of PAH including phase type (monomeric or polymeric), pore diameter and surface area of the silica substrate, and surface density of the C₁₈ ligands. In this paper the separation of eleven PAH isomers of molecular weight 278 is used to further illustrate the effect of stationary phase characteristics and shape of the solute (length-to-breadth ratio, L/B) on retention and selectivity. Only polymeric C₁₈ phases with a high C₁₈ surface coverage provided separation of all eleven isomers and the elution order of these isomers generally followed increasing L/B values. The effect of solute nonplanarity on reversed-phase LC retention was investigated on both monomeric and polymeric phases using a series of planar and nonplanar PAH pairs. For each solute pair, the nonplanar solute eluted earlier than the planar solute, the largest selectivity factors being observed on the C₁₈ phase with the highest percent carbon load. Based on these studies, a model is proposed to describe the retention of PAH on polymeric C₁₈ phases.     

Ion-chromatographic behavior of alkali metal cations and ammonium ion on zirconium-adsorbing silica gel

The preparation and evaluation of zirconium-adsorbing silica gel (Zr-Silica) as an ion-exchange stationary phase in ion chromatography for inorganic anions and cations was carried out. The Zr-Silica was prepared by the reaction of silanol groups on the surface of the silica gel with zirconium butoxide (Zr(OCH2CH2CH2CH3)4) in ethanol. The ion-exchange characteristics of the Zr-Silica were evaluated using 10 mM tartaric acid at pH 2.5 as eluent. The Zr-Silica was found to act as a cation-exchanger under the eluent conditions. The retention behavior of alkali and alkaline earth metal cations was then investigated. The Zr-Silica column was proved to be suitable for the simultaneous separation of alkali metal cations and ammonium ion. Excellent separation of the cations on a 15 cm Zr-Silica column was achieved in 25 min using 10 mM tartaric acid as eluent.     

对-叔丁基杯[8]芳烃键合固定相的制备及表征

合成了一种新的对-叔丁基杯[8]芳烃的高效液相色谱键合固定相,考察了多环芳烃、苯甲酸酯、邻苯二甲酸酯、苯的单官能团取代物在该键合相上的反相液相色谱保留行为,并以甲醇-水作为流动相分离了氨基苯酚的邻、间、对取代位置异构体．研究结果发现,该键合相具有明显的反相特征,并讨论了可能的分离机理．     

L-苏氨酸手性分子印迹硅胶分离固定相的制备及分离性能研究

本文使用堆砌硅珠法以硅溶胶为原料、苏氨酸(L-Thr)为手性源构造手性环境,制备具有手性分离能力的全无机介孔手性硅胶球,对其进行元素分析、红外光谱法分析、透射电镜、扫描电镜和氮气吸附等表征,采用HPLC法探究无机介孔硅胶球制备的固定相对手性异构体和苯系位置异构体的拆分性能,成功分离了9对外消旋化合物和8种苯系位置异构体。L-Thr手性硅胶球在手性分离方面具有一定的可行性,并且在位置异构体的分离上具有良好的分离性能,色谱的重复性良好。     

Development of an affinity silica monolith containing alpha1-acid glycoprotein for chiral separations

An affinity monolith based on silica and containing immobilized alpha(1)-acid glycoprotein (AGP) was developed and evaluated in terms of its binding, efficiency and selectivity in chiral separations. The results were compared with data obtained for the same protein when used as a chiral stationary phase with HPLC-grade silica particles or monoliths based on a copolymer of glycidyl methacrylate (GMA) and ethylene dimethacrylate (EDMA). The surface coverage of AGP in the silica monolith was 18% higher than that obtained with silica particles and 61% higher than that measured for a GMA/EDMA monolith. The higher surface area of the silica monolith gave materials that contained 1.5- to 3.6-times more immobilized protein per unit volume when compared to silica particles or a GMA/EDMA monolith. The retention, efficiency and resolving power of the AGP silica monolith were evaluated by injecting two chiral analytes onto this column (i.e., R/S-warfarin and R/S-propranolol). In each case, the AGP silica monolith gave higher retention plus better resolution and efficiency than AGP columns containing silica particles or a GMA/EDMA monolith. The AGP silica monolith also gave lower back pressures and separation impedances than these other materials. It was concluded that silica monoliths can be valuable alternatives to silica particles or GMA/EDMA monoliths when used with AGP as a chiral stationary phase.     

Application of zirconium-modified silica gel as a stationary phase in the ion-exclusion chromatography of carboxylic acids I. Separation of benzenecarboxylic acids with tartaric acid as eluent and with UV-photometric detection

The application of zirconium-modified silica gels (Zr–Silicas) as stationary phases for ion-exclusion chromatography with UV-photometric detection (IEC–PD) for mono-, di-, tri- and tetrabenzenecarboxylic acids (pyromellitic, trimellitic, hemimellitic, o-phthalic, salicylic and benzoic acids) and phenol was carried out using tartaric acid as the eluent. Zr–Silicas were prepared by the reaction of the silanol group on the surface of silica gel with zirconium tetrabutoxide [Zr(OCH₂CH₂CH₂CH₃)₄] in ethanol solution. The effect of the amount of zirconium adsorbed on silica gel on chromatographic behavior of these benzenecarboxylic acids and phenol was investigated. As a result, Zr–Silica adsorbed on 20 mg zirconium g⁻¹ silica gel was the most suitable stationary phase in the IEC–PD for the simultaneous separation of these benzenecarboxylic acids and phenol. Excellent simultaneous separation and highly sensitive UV detection at 254 nm for these benzenecarboxylic acids and phenol were achieved in 20 min by the IEC–PD using the Zr–Silica column (250×4.6 mm I.D.) and a 10 mM tartaric acid at pH 2.5 as eluent.     

基于硅胶整体材料研磨颗粒的多功能聚乙二醇键合固定相的制备及其在高效液相色谱多模式分离中的应用

研究通过对溶胶-凝胶法制备的硅胶整体材料进行研磨、浮选、假晶相转换和水热处理，最终获得了粒径为2~5 μm、孔径为20~60 nm的硅胶颗粒。利用部分含氟的阴离子表面活性剂Capstone FS-66和常用的阳离子表面活性剂十六烷基三甲基溴化铵（CTAB）组成的双胶束模板体系对硅胶基质进行假晶相转换处理；再采用碳酸钠溶液水热处理的方式，进一步扩大孔径。用扫描电镜（SEM）和N₂吸附-解吸等温线测量对扩孔处理前后的硅胶整体材料研磨颗粒进行表征，结果清楚地显示了处理前后的形貌变化和差异。随后将含有长链聚乙二醇（PEG）的硅烷键合到扩孔后的硅胶颗粒表面，分别利用元素分析、红外光谱以及热重分析对固定相进行表征，并对固定相进行色谱性能评价。对键合固定相的元素分析和热重分析数据进行分析表明，硅胶表面键合PEG的含量约为8%。研究揭示了利用假晶相转换法与碳酸钠溶液水热处理和长链PEG硅烷修饰的硅胶整体材料颗粒在尺寸排阻色谱分离蛋白质方面的良好分离效果。同时进一步的高效液相色谱评价结果表明，该键合固定相还可用于疏水作用色谱模式分离核糖核酸酶A和溶菌酶，以及可用于亲水作用色谱模式分离吡啶甲酸、左旋多巴、三聚氰胺和邻苯二酚等极性比较强的化合物。研究显示了PEG键合固定相具有多功能性，及其在多模式高效液相色谱分离中的应用潜力。