纤维素基磁性聚偕肟树脂的研究：—（NH4）2IrCl6在树脂上的咐吸

碱式纤维系基磁性聚偕胺肟树脂（ＢＭＡＯ）吸附（ＮＨ４）ＩｒＣｌ６是快速过程，属超当量吸附。吸附结果生成ＡＯ－Ｉｒ和ＡＯ２－Ｉｒ３络合物，随后Ｉｒ（Ⅳ）被偕胺肟基还原为Ｉｒ（０），聚集成球状晶簇随着在树脂表面。     

笼形聚偕胺肟树脂的研究贵金属在RCO2H／ACAO树脂上的交换吸附

用羧酸处理的笼形聚偕胺肟树脂（ＲＣＯ２Ｈ／ＡＣＡＯ）吸附Ｐｄ（Ⅱ）、Ｉｒ（Ⅳ）、Ｐｔ（Ⅳ）、Ａｇ（Ⅰ）、Ａｕ（Ⅲ）离子的能力与羧酸性质有关，巯其乙酸／ＡＣＡＯ树脂对Ｐｄ（Ⅱ）、Ｉｒ（Ⅳ）和Ａｕ（Ⅲ）吸附容量较高，乙二酸／ＡＣＡＯ树脂则对Ａｇ（Ⅰ）和Ｐｔ（Ⅳ）离子有稍强的吸附能力。除Ｐｄ（Ⅱ）外，ＲＣＯ２Ｈ／ＡＣＡＯ树脂吸附贵金属离子的能力低于笼形聚偕胺肟树脂（ＣＡＯ）和碱处理笼形聚偕胺肟树脂（ＢＣ     

纤维素基磁性聚偕胺肟树脂的研究：—PdCl2在树脂上的吸附动力学

ＰｄＣｌ２在碱式纤维素基磁性聚偕胺肟树脂上的吸附行为与Ｈ２ＰｄＣｌ４不同，主要表现在高的超当量吸附。动力学研究表明，Ｈ２ＰｄＣｌ４在碱中和过程中逐步转变为Ｎａ２ＰｄＣｌ４、ＰｄＣｌ２、和［Ｐｄ（ＯＨ）２Ｃｌ２］２，它们被树脂吸附时首先形成ＡＯ－Ｐｄ２和ＡＯ２－Ｐｄ３络合物，随后被还原为单质钯，汇聚成微粒吸着在树脂表面。     

笼形聚偕氨肟树脂的研究：酸处理树脂的吸附性能

笼形聚偕氨肟树脂（ＣＡＯ）经盐酸处理垢，伯胺基转变成胺盐。酸处理笼形聚偕氨肟树脂（ＡＣＡＯ）对Ｍｇ＾２＋，Ｃａ＾２＋，Ｂａ＾２＋，Ｍｎ＾２＋，Ｃｏ＾２＋，Ｎｉ＾２＋离子不吸附；对Ｚｎ＾２＋，Ｃｄ＾２＋，Ｃｕ＾２＋，Ｐｂ＾２＋离子的吸附效率在２０％以下，但对Ｈｇ＾２＋离子的吸附效率则高达７１．２％；对一些金属络阴离子的吸附效率顺序是Ｆｅ（ＣＮ）＾２－６＞Ｃｒ２Ｏ＾２－７＞ＭｏＯ＾２－４＞ＰｔＣｌ＾２     

笼形聚偕胺肟树脂的研究：卤素及其化合物在树脂上的吸附

考查了碱处理笼形聚偕胺肟树脂和乙酸，硝酸或盐酸处理的笼形聚偕胺肟树脂对卤化物，卤酸盐和卤素的吸附行为。发现ＢＣＡＯ和ＨＯＡｃ／ＡＣＡＯ不吸附卤化物和卤酸盐；ＨＮＯ３／ＡＣＡＯ和ＨＣｌ／ＡＣＡＯ对两类化合物表现出不同吸附能力。     

笼形聚偕胺肟树脂的研究──(NH_4)_2IrCl_6在碱式树脂上吸附与还原过程

超当量吸附是碱式笼形聚偕胺肟树脂（BCAO）吸附氯铱酸铵的特征之一．被吸附的氯铱酸铵与浴液中树脂的偕胺肟基的摩尔比为3．0，表明物理吸附在吸附过程中起主导作用．吸附结果是氯铱酸铵和偕胺肟基结合而成1：1络合物，并且发生了氧化还原反应，后者从扫描电镜观察得到证实。     

纤维素基磁性聚偕胺肟树脂的研究——锌副族金属离子在树脂上的吸附

研究了Ｚｎ２＋、Ｃｄ２＋、和Ｈｇ２＋离子在碱式纤维素基磁性聚偕胺肟树脂（ＢＭＡＯ）上的吸附动力学。结果表明，吸附速度受粒内扩散所控制。测得粒内扩散系数分别是１．２２×１０－４、２．４２×１０－４和３．９０×１０－４ｃｍ２·ｓ－１；Ｈｇ２＋离子在树脂上的吸附行为符合Ｆｒｅｕｎｄｌｉｃｈ和Ｌａｎｇｍｕｉｒ等温吸附方程；浓集因数随Ｈｇ２＋离子浓度降低而上升，有利于从稀溶液中除去Ｈｇ２＋离子。将树脂加至Ｚｎ２＋、Ｃｄ２＋或Ｈｇ２＋离子浓度为５０ｐｐｍ的溶液中，离子去除率分别是９６．１、９９．９和９９．３％。     

磁性树脂的研究—纤维素基聚氨肟树脂

用醋酸纤维素包埋ｒ－Ｆｅ２Ｏ３作磁芯，经过接枝改性，首次合成了纤维素基聚氨肟树脂（ＭＰＡＯ）．实验结果表明，树脂有效地吸附Ｈｇ２＋、Ｃｕ２＋、Ｐｂ２＋、Ｎｉ２＋等重金属离子，优点是吸附速度快、易洗脱．吸附动力学证明化学反应是吸附速度的决定因素，与树脂吸附层的非交联结构有关．     

4—氨基—1,2,4—三氮唑树脂对Ir（IV）和Ru（IV）的吸附行为

４－氨基－１，２，４－三氮唑树脂（４－ａｍｉｎｏ－１，２，４－ｔｒｉａｚｏｌｅ ｒｅｓｉｎ，４－ＡＴＲ）功能基含量３．７６ｍｍｏｌ／ｇ４－ＡＴＲ。它对Ｉｒ（Ⅳ）、Ｒｕ（Ⅳ）的吸附容量分别为５３５（２．７８），３８６（３．８２）ｍｇ／ｇ４－ＡＴＲ（ｍｍｏｌ／ｇ４－ＡＴＲ）；吸附摩尔比分别为０．７４，１．０２（离子／功能基）。４－ＡＴＲ对Ｉｒ（Ⅳ）、Ｒｕ（Ⅳ）的表观吸附活化能分别为１３±２，１９±４Ｋ     

五种含氨基和吡啶基功能性聚合物对Ir（IV）,Ru（IV）的吸附行为

五种含氨基及吡啶基功能性聚合物，２，６－二氨基吡啶树脂（ＤＡＰＲ），２－氨基甲基吡啶树脂（２－ＡＭＰＲ），２－氨基吡啶树脂（２－ＡＰＲ），３－氨基吡啶树脂（３－ＡＰＲ），４－氨基吡啶树脂（４－ＡＰＲ）对Ｉｒ（Ⅳ）和Ｒｕ（Ⅳ）的最佳吸附酸度均为０．１ｍｏｌＨＣｌ／Ｌ，对Ｉｒ（Ⅳ）的吸附容量分别为１２００、７８６、４８０、５００和３８１ｍｇＩｒ（Ⅳ）／ｇ树脂，其吸附摩尔比（离子／功能基）分别为２．１１     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Microwave-assisted copper-catalyzed stereoselective ring expansion of three-membered heterocycles with α-diazo-β-dicarbonyl compounds

Microwave-assisted copper-catalyzed ring expansions of three-membered heterocycles with α-diazo-β-dicarbonyl compounds were investigated. Thiiranes generated 3-acyl-5,6-dihydro-1,4-oxathiines in the presence of copper sulfate and trans-3-acyl-5,6-dihydro-1,4-oxathiines as stereospecific products for 1,2-disubstituted cis-thiiranes through an intramolecular S_N2 process. Oxiranes gave rise to 2-acyl-5,6-dihydro-1,4-dioxines under the catalysis of copper hexafluoroacetylacetonate and cis-3-acyl-5,6-dihydro-1,4-dioxines as stereospecific products for 1,2-disubstituted cis-oxiranes via an intimate ion-pair mechanism. The current method provides a direct and simple strategy in efficient preparation of 3-acyl-5,6-dihydro-1,4-oxathiines and 2-acyl-5,6-dihydro-1,4-dioxines, important agents in medicinal and agricultural chemistry, from readily available thiiranes and oxiranes, respectively.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.