Structural stability of heat-treated CoN/CN soft X-ray multilayers fabricated by dual-facing-target sputtering

286 , 176 (1996)]. (1) The interdiffusion critical wavelengths were calculated as 2.00–2.04 nm at temperatures ranging from 473 to 523 K, which is equal to those of Co/C multilayers within the experimental error, indicating that the interdiffusion behaviours in the CoN/CN multilayers are still decided by the thermodynamic properties of the Co-C system. (2) The effective interdiffusivities and macroscopic diffusion coefficients are smaller. (3) The activation energy for diffusion is larger. The features imply that it is possible to improve the thermal stability of Co/C multilayers by doping with N atoms. The high-temperature annealing results imply that the destructive threshold of the CoN/CN multilayers is 100–200 °C higher than that of Co/C multilayers. The small-angle X-ray diffraction of CoN/CN soft X-ray multilayers indicates that the period expansion of the multilayers is only 4% at 400 °C, and the interface pattern still exists even if they were annealed at 700 °C. The large-angle X-ray diffraction and transmission electron microscopy analysis reveal that the crystalline process is significantly retarded if doped with N atoms, leading to a smaller grain size at higher annealing temperatures. The significant improvement of the thermal stability can be interpreted with Raman spectroscopy and X-ray photoelectron spectroscopy analysis. The Raman spectra give the evidence that the formation of the sp³ bonding in the CN sublayers can be suppressed effectively by doping with N atoms, and thus the period expansion resulting from the changes in the density of CN layers can be decreased considerably. The X-ray photoelectron spectra give information about existence of the strong covalent bonding between N atoms and the ionic bonding between Co and N atoms, which can slow down the tendency of the structural relaxation. The interstitial N atoms decrease the mobility of Co atoms, and thus the fcc Co and hcp Co coexist even though the annealing temperature is much higher than the phase transformation temperature of 420 °C, leading to the suppression of the grain growth. Received: 29 May 1997/Accepted: 8 September 1997     

Dual-facing-target-sputtered amorphous CoMoN/CN compound soft-X-ray multilayers: structures and thermal stability

Amorphous CoMoN/CN compound soft-X-ray multilayers were fabricated by dual-facing-target sputtering. Their structural thermal stability has been investigated by monitoring the structural evolutions of CN and CoMoN sublayers at annealing temperatures up to 800 °C using complementary measurement techniques, and measuring the coefficient of interfacial diffusion at annealing temperatures below 300 °C. The period expansion at annealing temperatures below 600 °C, which is usually observed in annealed metal/carbon soft-X-ray multilayers, is only 5%. The enhanced sp² to sp³ bond ratio caused by the incorporation annealing effect of nitrogen [1] is thought to be responsible for the improved thermal stability of CN sublayers. Mo addition greatly suppresses the structural thermal evolution of CoMoN sublayers. XPS and TEM analyses indicate that the strong chemical bonding between N and Co atoms and Mo nitride aggregation in the grain boundary of cobalt are the main mechanisms for the high thermal stability of CoMoN sublayers. The layered structure of the CoMoN/CN multilayers still exists at the annealing temperature of 800 °C, while Co/C and CoN/CN multilayers have already been destroyed at this temperature. Compared with Co/C and CoN/CN multilayers, the smaller negative interdiffusivity measured by X-ray diffraction reveals the stable interfaces of CoMoN/CN multilayers. These results illustrate that refractory metal incorporation and strong chemical bond establishment are quite effective in obtaining thermally highly stable compound soft-X-ray optical multilayers . PACS 68.65+g; 68.55.Ln; 68.35.Fx; 68.60.Dv     

Structural changes of diamond-like carbon films due to atomic hydrogen exposure during annealing

We have deposited diamond-like carbon (DLC) films by radio-frequency magnetron sputtering, and have annealed the films under various conditions to investigate the effects of annealing on the structural properties by visible Raman spectroscopy, X-ray photoelectron spectroscopy and atomic force microscopy. The structural ordering of hydrogenated DLC films occurs during annealing below 400 °C in a vacuum and a hydrogen gas atmosphere, while unhydrogenated DLC films are not ordered during annealing even at 700 °C. On the other hand, the ordering and the decrease of the sp³ content are observed for both the films after annealing under an atomic hydrogen exposure. The ordering progresses as the annealing temperature and time are increased. The reduction of the film thickness after annealing is suppressed with increasing annealing temperature. The results suggest that both the preferential etching by atomic hydrogen and the hydrogen evolution encourage the structural changes under an atomic hydrogen exposure.     

XPS study of the chemical bonding in hydrogenated amorphous germanium–carbon alloys

A systematic study of the chemical bonding in hydrogenated amorphous germanium–carbon (a-Ge_1-xC_x:H)alloys using X-ray photoelectron spectroscopy (XPS) is presented. The films, with carbon content ranging from 0 at. % to 100 at. %, were prepared by the rf co-sputtering technique. Raman spectroscopy was used to investigate the carbon hybridization. Rutherford backscattering spectroscopy (RBS) and XPS were used to determine the film stoichiometry. The Ge 3d and C 1s core levels were used for investigating the bonding properties of germanium and carbon atoms, respectively. The relative concentrations of C–Ge, C–C, and C–H bonds were calculated using the intensities of the chemically shifted C 1s components. It was observed that the carbon atoms enter the germanium network with different hybridization, which depends on the carbon concentration. For concentrations lower than 20 at. %, the carbon atoms are preferentially sp³ hybridized, and approximately randomly distributed. As the carbon content increases the concentration of sp² sites also increases and the films are more graphitic-like. Received: 4 May 1999 / Accepted: 24 November 1999 / Published online: 24 March 2000     

Structure and electrical properties of CdIn2O4 thin films prepared by DC reactive magnetron sputtering

CdIn₂O₄ thin films were prepared by direct-current (DC) reactive magnetron sputtering. The structure, surface morphology and the chemical composition of the thin films were analyzed by X-ray diffraction (XRD), atomic force microscope (AFM) and X-ray photoelectron spectroscopy (XPS), respectively. The electrical properties of the films prepared in different oxygen concentration and annealing treatment were determined, and the effects of the preparing conditions on the structure and electrical properties were also explored. It indicates that the CdIn₂O₄ thin films with uniform and dense surface morphology contain mainly CdIn₂O₄, In₂O₃ phases, and CdO phase is also observed. The XPS analysis confirms the films are in oxygen-deficient state. The electrical properties of these films significantly depend on the preparing conditions, the resistivity of the films with the oxygen concentration of 4.29% is 2.95 × 10⁻⁴ Ω cm and the Hall mobility is as high as 60.32 cm²/V s. Annealing treatment can improve the electrical performance of the films.     

Nitrogen 1s electron binding energy assignment in carbon nitride thin films with different structures

Carbon nitride thin films deposited by dc unbalanced magnetron sputtering have been analyzed by high-resolution X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy. The XPS data show that N 1s binding states depend on substrate temperature (T_s). By comparison with the Raman spectra, N 1s binding states are assigned in which nitrogen atoms are mainly bound to sp² and sp³ carbon atoms at T_s = 100°C, whereas at T_s = 500°C nitrogen atoms are mainly bonded to sp², sp³ and sp¹ carbon atoms.     

Vacancies ordered in screw form (VOSF) and layered indium selenide thin film deposition by laser back ablation

Indium selenide thin films are important due to their applications in non-volatile memory and solar cells. In this work, we present an initial study of a new application of deposition-site selective laser back ablation (LBA) for making thin films of In₂Se₃. Invacuo annealing and subsequent characterization of the films by X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) indicate that control of substrate temperature during deposition and post-deposition annealing temperature is critical in determining the phase and composition of the films. The initial laser fluence and target film thickness determine the amount of material deposited onto the substrate.     

Synthesis of carbon nitride films by direct current plasma assisted pulsed laser deposition

Carbon nitride films were deposited by pulsed laser ablation of a graphite target under a nitrogen atmosphere at room temperature. A direct current discharge apparatus was used to supply active nitrogen species during the deposition of carbon nitride films. The composition and bonding structure of carbon nitride films were determined by Fourier-transform infrared (FTIR) spectroscopy and X-ray photoelectron spectroscopy. The incorporation of nitrogen atoms in the films is greatly improved by the using of a dc glow discharge. The ratio N/C can reach 0.34 at the discharge voltage of 400 V. Six peaks centered at 1025 cm^-1, 1226 cm^-1, 1381 cm^-1, 1534 cm^-1, 1629 cm^-1, and 2200 cm^-1 can be clearly distinguished from the FTIR spectra of the deposited films, which indicates the existence of C–N, C=N, and C≡N bonds. The fraction of sp² C, C≡N bonds, and C=N bonds in the deposited films increases with increasing discharge voltage. Deconvolution results of C 1s and N 1s spectra also indicate that nitrogen atoms in the films are chemically bonded to sp¹ C, sp² C, and sp³ C atoms. Most of the nitrogen atoms are bonded to sp² C atoms. Increasing the discharge voltage leads to a decrease of the fraction of nitrogen atoms bonded to sp² C and the fraction of amorphous carbon; however, it leads to an increase of the fraction of nitrogen atoms bonded to sp³ C and the fraction of sp² C and sp³ C atoms bonded to nitrogen atoms. Received: 7 June 2000 / Accepted: 19 February 2001 / Published online: 27 June 2001     

Evaluation of carbon films electrodeposited on different substrates from different organic solvents

Diamond-like-carbon (DLC) films have been deposited on Si, aluminum and indium tin oxide-coated glass from several organic solvents with pulse-modulated power. The films are characterized by X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy. XPS spectra show that the main composition of the films is carbon and Raman spectra show that the films are typical DLC films and a high potential is preferable in the formation of sp ³-structure carbon. Comparing the results from different solvents and different substrates we deduce that the methyl group of the solvents has a critical function in forming the DLC films. However, the formation process and the characters of the films, such as appearance, resistivity and thickness, are mainly determined by the substrate. We may call this deposition a substrate-controlled reaction. Received: 31 May 2000 / Accepted: 9 January 2001 / Published online: 3 April 2001     

电解有机溶液法在Si表面制备类金刚石薄膜及退火对其结构的影响

在对不同有机溶剂分子结构分析的基础上,选取甲醇、DMF(N,N-二甲基甲酰胺)和乙腈溶液为碳源,以脉冲直流电源电解有机溶液的方法在Si片上制得了含氢类金刚石薄膜(DLC薄膜),并研究了退火对薄膜结构的影响.通过X射线光电子能谱(XPS),喇曼(Raman)和红外(IR)光谱对薄膜的结构进行了分析表征.XPS表明薄膜的主要成分为C,喇曼光谱显示所得薄膜为典型DLC薄膜.喇曼和红外光谱还表明,膜中含有大量H并且主要键合于sp³碳处.随着退火的进行薄膜中的H被去除.随温度升高薄膜电阻率的下 关键词： 类金刚石薄膜 退火     

辉光放电等离子体辅助XeCl准分子激光溅射沉积碳氮薄膜

利用直流辉光放电等离子体辅助的脉冲激光沉积技术在Si衬底上生长了碳氮薄膜.通过扫描电子显微镜、X射线衍射、X射线光电子能谱、俄歇电子能谱等多种手段,对薄膜的形貌、成分、晶体结构、价键状态等特性进行了分析和确定.结果表明,沉积薄膜为含有非晶SiN和晶态氮化碳颗粒结构,晶态成分呈多晶态,主要为α-C₃N₄相、β-C₃N₄相,晶粒大小为40—60nm.碳氮之间主要以C-N非极性共价键形式相结合. 关键词： 脉冲激光沉积 直流辉光放电 碳氮薄膜     

Structural stability of heat-treated Co/C soft X-ray multilayers fabricated by dual-facing-target sputtering

Thermal stability of Co/C multilayers prepared by a dual-facing-target sputtering system was studied. A picture of the thermally induced changes in the microstructure was obtained using complementary measurement techniques including low-angle and high-angle X-ray diffraction, transmission electron microscopy, Raman spectroscopy and X-ray photoelectron spectroscopy. It was found that the period expansion, reflectivity change and compound formation, that were observed after annealing are caused by structural changes both in the sublayers and at the interfaces. Below 400°C, the period expansion is mainly caused by the graphitization of the amorphous carbon layers, and a significant increase in the reflectivity at grazing incidence was observed. By 500°C, the crystallization and agglomeration of Co layers induce an enormous period expansion and a serious decrease in reflectivity. A small amount of carbide is found to form at this temperature. Our results imply that new multilayer structures, e.g., compound multilayers will have to be developed for use at high temperatures or under high X-ray incident flux.     

Influence of annealing temperature on structural, optical and magnetic properties of Mn-doped ZnO thin films prepared by sol-gel method

Thin films of Zn_1−xMn_xO (x=0.01) diluted magnetic semiconductor were prepared on Si (1 0 0) substrates by the sol-gel method. The influence of annealing temperature on the structural, optical and magnetic properties was studied by X-ray diffraction (XRD), atom force microscopy (AFM), photoluminescence (PL) and SQUID magnetometer (MPMS, Quantum Design). The XRD spectrum shows that all the films are single crystalline with (0 0 2) preferential orientation along c-axis, indicating there are not any secondary phases. The atomic force microscopy images show the surfaces morphologies change greatly with an increase in annealing temperature. PL spectra reveal that the films marginally shift the near band-edge (NBE) position due to stress. The magnetic measurements of the films using SQUID clearly indicate the room temperature ferromagnetic behavior, and the Curie temperature of the samples is above room temperature. X-ray photoelectron spectroscopy (XPS) patterns suggest that Mn²⁺ ions were successfully incorporated into the lattice position of Zn²⁺ ions in ZnO host. It is also found that the post-annealing treatment can affect the ferromagnetic behavior of the films effectively.     

Structural and optical properties of zinc nitride films prepared by rf magnetron sputtering

Zinc nitride films were prepared on quartz substrates by rf magnetron sputtering using pure zinc target in N₂-Ar plasma. X-ray diffraction (XRD) analysis indicates that the films just after deposition are polycrystalline with a cubic structure and a preferred orientation of (4 0 0). X-ray photoelectron spectroscopy (XPS) analysis also confirms the formation of N-Zn bonds and the substitution incorporation of oxygen for nitrogen on the surface of the films. The optical band gap is calculated from the transmittance spectra of films just after deposition, and a direct band gap of 1.01 ± 0.02 eV is obtained. Room temperature PL measurement is also performed to investigate the effect of defect on the band gap and quality of the zinc nitride films.     

Synthesis of carbon nitride films by low-power inductively coupled plasma-activated transport reactions from a solid carbon source

Thin films of carbon nitride were prepared by low-power inductively coupled plasma chemical vapor deposition from a solid carbon source by utilizing transport reactions. The maximum deposition rate achieved was 10 nm/min and depended mainly on the substrate position in the reactor. The nitrogen fraction in the films was not so sensitive to the process parameters and was at about 0.5 for all experiments as measured by Auger electron spectroscopy (AES) and elastic recoil detection (ERD) analysis. The chemical bonding structure studied by Fourier transform infrared (FTIR) spectroscopy and X-ray photoelectron spectroscopy (XPS) showed the presence of triple, double and single bonds between carbon and nitrogen atoms. Received: 12 May 1999 / Accepted: 12 May 1999 / Published online: 24 June 1999     

Investigation of microstructure evolution in Pt-doped TiO2 thin films deposited by rf magnetron sputtering

Pt-doped titanium dioxide or titania (TiO₂) films were grown by rf magnetron sputtering and then annealed in the conventional thermal annealing (CTA) process. Raman spectroscopy was used to characterize the structure of the films deposited. The effect of sputtering parameters was studied in focus of the nucleation sites energies (influenced by the substrate temperature) and substrate bombardment energies (influenced by the sputtering pressure or rf power). The X-ray diffractions technique was used to investigate the structural variation after the films were annealed at different temperatures. It was found that 0.75% Pt-doped TiO₂ film exhibits better thermal stability and smaller grain sizes than 0.35% Pt-doped TiO₂ film, suggesting that the suppression of crystallization can be expected with a proper increase of Pt doping level. And the obtained optical transparency higher than 80% even after annealing has demonstrated the films’ prospect for future developments.     

Synthesis of molybdenum silicide by both ion implantation and ion beam assisted deposition

Two groups of Mo/Si films were deposited on surface of Si(1 0 0) crystal. The first group of the samples was prepared by both ion beam assisted deposition (IBAD) and metal vapor vacuum arc (MEVVA) ion implantation technologies under temperatures from 200 to 400 °C. The deposited species of IBAD were Mo and Si, and different sputtering Ar ion densities were selected. The mixed Mo/Si films were implanted by Mo ion with energy of 94 keV, and fluence of Mo ion was 5 × 10¹⁶ ions/cm². The second group of the samples was prepared only by IBAD under the same test temperature range. The Mo/Si samples were analyzed by X-ray diffraction (XRD), atomic force microscopy (AFM), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), sheet resistance, nanohardness, and modulus of the Mo/Si films were also measured. For the Mo/Si films implanted with Mo ion, XRD results indicate that phase of the Mo/Si films prepared at 400 and 300 °C was pure MoSi₂. Sheet resistance of the Mo/Si films implanted with Mo ion was less than that of the Mo/Si films prepared without ion implantation. Nanohardness and modulus of the Mo/Si films were obviously affected by test parameters.     

XRD and XPS analysis of laser treated vanadium oxide thin films

In this work, we present X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD) analysis of laser treated vanadium oxide sols. The films were also observed by transmission electron microscopy (TEM) and scanning electron microscopy (SEM) to reveal how the original xerogel structure changes into irregular shaped, layer structured V₂O₅ due to the laser radiation. XRD revealed that above 102 W/cm² the original xerogel structure disappears and above 129 W/cm² the films become totally polycrystalline with an orthorhombic structure. XPS spectra showed O/V ratio increment by using higher laser intensities.     

Annealing effects on the microstructure of amorphous carbon nitride films

Amorphous carbon nitride films, prepared using a dc facing-target reactive sputtering system, were annealed at temperatures up to 650 °C for 1 h in vacuum. The effects of heat treatment on the films, i.e. changes in the composition and structure, were investigated. It was found that annealing at temperatures ranging from 300 to 650 °C, results in the N content decreasing from ∼33 at.% in the as-deposited films to ∼5 at.%. The loss of N, especially those bonded to sp³C, causes the rearrangement of the film's microstructure, and the dual effects of the thermal annealing are quite noticeable: (1) annealing destroys most graphite-like structures, and more non-aromatic sp²C components and C≡N terminal structures are formed at higher annealing temperatures, contributing to a looser film's structure. (2) Annealing makes the remaining aromatic sp²C structure become more order. The results also reveal that N atoms bonded to sp³C are easily removed with the increasing temperature compared to those bonded to sp²C, which indicates that Nsp²C bonds had a higher thermal stability than Nsp³C.     

Bonding configurations in amorphous carbon and nitrogenated carbon films synthesised by femtosecond laser deposition

The effect of nitrogen addition and laser fluence on the atomic structure of amorphous carbon films (a-C) synthesized by femtosecond pulsed laser deposition has been studied. The chemical bonding in the films was investigated by means of X-ray photoelectron (XPS) and Raman spectroscopies. XPS studies revealed a decrease in the sp³ bonded carbon sites and an associated increase in the N-sp²C bonding sites with increasing nitrogen content in the CN_x films. An increase in laser fluence from 0.36 to 1.7 J/cm² led to a rise in sp³C sites. These results were further confirmed by Raman spectroscopy. The I_D/I_G ratio increased monotonically and G line-width decreased with the increase of nitrogen content in the films indicating a rise in either the number or the size of the sp² clusters. Furthermore a visible excitation wavelength dependence study established the resonant Raman process in a-C and CN_x films. PACS 81.05.Uw; 81.15.Fg; 82.80