Trapping tetramethoxyzincate and -cobaltate(II) between Mo24+ units

Two compounds of a new type, [Mo(2)](CH(3)O)(2)M(CH(3)O)(2)[Mo(2)] where [Mo(2)] is an abbreviation for Mo(2)[(p-MeOC(6)H(4))NCHN(p-MeOC(6)H(4))](3) and M = Zn (1) and Co (2), are reported. Discrete [M(OR)(4)](2-) ions, either as such or in the mu(2),eta(4) role, have not heretofore been described. In these compounds they have distorted tetrahedral structures and bridge two [Mo(2)] groups in much the same way as did SO(4)(2-), MoO(4)(2-), and WO(4)(2-) ions in other recently reported compounds (Cotton, F. A.; Donahue, J. P.; Murillo, C. A. Inorg. Chem. 2001, 40, 2229). The (1)H NMR spectrum of 1 and the visible spectrum and magnetic properties of 2 are consistent with these structures. The M(OCH(3))(4) bridges are moderately effective in coupling the two [Mo(2)] redox centers. Compounds 1 and 2 may also be viewed as having Zn(II) and Co(II) centers tetrahedrally coordinated by the bidentate ligand [Mo(2)[(p-MeOC(6)H(4))NCHN(p-MeOC(6)H(4))](3)(OMe)(2)](-). From that point of view they may be compared with Zn(DPM)(2) and Co(DPM)(2) (3), where DPM is the anion of dipivaloylmethane. For purposes of comparison, 3 has been fully characterized structurally, spectroscopically, and magnetically. Close analogies between 2 and 3 are shown to exist.     

A study of structural and bonding variations in the homologous series [Mo(2)(CN)(6)(dppm)(2)](n-) (n = 2, 1, 0)

Reaction of Mo(2)Cl(4)(dppm)(2) (dppm = bis(diphenylphosphino)methane) with 6 equiv of [n-Bu(4)N][CN] or [Et(4)N][CN] in dichloromethane yields [n-Bu(4)N](2)[Mo(2)(CN)(6)(dppm)(2)] (1) and [Et(4)N](2)[Mo(2)(CN)(6)(dppm)(2)] (2), respectively. The corresponding one- and two-electron oxidation products [n-Bu(4)N][Mo(2)(CN)(6)(dppm)(2)] (3) and Mo(2)(CN)(6)(dppm)(2) (4)were prepared by reactions of 1 with the oxidant NOBF(4). Single-crystal X-ray structures of 2.2CH(3)CN, 3.2CH(3)CN.2H(2)O, and 4.2CH(3)NO(2) were performed, and the results confirmed that all three complexes contain identical ligand sets with trans dppm ligands bisecting the Mo(2)(mu-CN)(2)(CN)(4) equatorial plane. The binding of the bridging cyanide ligands is affected by the oxidation state of the dimolybdenum core as evidenced by an increase in side-on pi-bonding overlap of the mu-CN in going from 1 to 4. The greater extent of pi-donation into Mo orbitals is accompanied by a lengthening of the Mo-Mo distance (2.736(1) A in Mo(2)(II,II) (2), 2.830(1) A in Mo(2)(II,III) (3), and 2.936(1) A in Mo(2)(III,III) (4)). A computational study of the closed-shell members of this homologous series, [Mo(2)(CN)(6)(dppm)(2)](n)() (n = 2-, 0), indicates that the more pronounced side-on pi-donation evident in the X-ray structure of 4 leads to significant destabilization of the delta orbital and marginal stabilization of the delta() orbitals with respect to nearly degenerate delta and delta orbitals in the parent compound, 2. The loss of delta contributions combined with the reduced orbital overlap due to higher charges on molybdenum centers in oxidized complexes 3 and 4 is responsible for the observed increase in the length of the Mo-Mo bond.     

How to make a major shift in a redox potential: ligand control of the oxidation state of dimolybdenum units

A compound reported earlier (Polyhedron 1989, 8, 2339) as (Bu(n)()(4)N)(2)H(2)[Mo(2)[Mo(CO)(4)(PhPO(2))(2)](2)] has been reexamined. We find that the hydrogen atoms in this formula are not present. Therefore, the complex must be considered as having a central triply bonded Mo(2)(6+) unit, instead of a quadruply bonded Mo(2)(4+) unit. Our conclusion is based on a variety of experimental evidence, including X-ray crystal structures of four crystal forms, as well as the neutron crystal structure of one. This explains the relatively long Mo-Mo bond lengths found in the range 2.1874(7)-2.2225(7) A and the absence of a delta --> delta transition in the visible spectrum. From electrochemistry we also find that the diphosphonate ligand has such an exceptional ability to stabilize higher oxidation states that even common solvents such as CH(2)Cl(2) and C(2)H(5)OH readily oxidize the Mo(2)(4+) unit that is introduced from the Mo(2)(O(2)CCH(3))(4) or [Mo(2)(O(2)CCH(3))(2)(NCCH(3))(6)](BF(4))(2) employed in the preparation. The only chemically reversible wave at E(1/2) = -1.54 V vs Ag/AgCl corresponds to the reduction process Mo(2)(6+) --> Mo(2)(5+).     

Molybdenum amido complexes with single Mo-N bonds: synthesis,structure, and reactivity

Reactions of the complex [MoCl(eta(3)-C(3)H(4)-Me-2)(CO)(2)(phen)] (1) (phen=1,10-phenanthroline) with potassium arylamides were used to synthesize the amido complexes [Mo(N(R)Ar)(eta(3)-C(3)H(4)-Me-2)(CO)(2)(phen)] (R=H, Ar=Ph, 2 a; R=H, Ar=p-tolyl, 2 b; R=Me, Ar=Ph; 2 c). For 2 b the Mo-N(amido) bond length (2.105(4) A) is consistent with it being a single bond, with which the metal attains an 18-electron configuration. The reaction of 2 b with HOTf affords the amino complex [Mo(eta(3)-C(3)H(4)-Me-2)(NH(2)(p-tol))(CO)(2)(phen)]OTf (3-OTf). Treatment of 3-OTf with nBuLi or KN(SiMe(3))(2) regenerates 2 b. The new amido complexes react with CS(2), arylisothiocyanates and maleic anhydride. A single product corresponding to the formal insertion of the electrophile into the Mo-N(amido) bond is obtained in each case. For maleic anhydride, ring opening accompanied the formation of the insertion product. The reaction of 2 b with maleimide affords [Mo(eta(3)-C(3)H(4)-Me-2)[NC(O)CH=CHC(O)](CO)(2)(phen)] (7), which results from simple acid-base metathesis. The reaction of 2 b with (p-tol)NCO affords [[Mo(eta(3)-C(3)H(4)-Me-2)(CO)(2)(phen)](2)(eta(2)-MoO(4))] (8), which corresponds to oxidation of one third of the metal atoms to Mo(VI). Complex 8 was also obtained in the reactions of 2 b with CO(2) or the lactide 3,6-dimethyl-1,4-dioxane-2,5-dione. The structures of the compounds 2 b, 3-OTf, [Mo(eta(3)-C(3)H(4)-Me-2)[SC(S)(N(H)Ph)](CO)(2)(phen)] (4), [Mo(eta(3)-C(3)H(4)-Me-2)[SC(N(p-tol))(NH(p-tol))](CO)(2)(phen)] (5 a), and [Mo(eta(3)-C(3)H(4)-Me-2)[OC(O)CH=CHC(O)(NH(p-tol))](CO)(2)(phen)] (6), 7, and 8 (both the free complex and its N,N'-di(p-tolyl)urea adduct) were determined by X-ray diffraction.     

Encapsulation of cyanometalates by a tris-macrocyclic ligand tricopper(II) complex: syntheses, structural variation, and magnetic exchange coupling pathways

The reaction of [M(CN)(6)](3-) (M = Cr(3+), Mn(3+), Fe(3+), Co(3+)) and [M(CN)(8)](4-/3-) (M = Mo(4+/5+), W(4+/5+)) with the trinuclear copper(II) complex of 1,3,5-triazine-2,4,6-triyltris[3-(1,3,5,8,12-pentaazacyclotetradecane)] ([Cu(3)(L)](6+)) leads to partially encapsulated cyanometalates. With hexacyanometalate(III) complexes, [Cu(3)(L)](6+) forms the isostructural host-guest complexes [[[Cu(3)(L)(OH(2))(2)][M(CN)(6)](2)][M(CN)(6)]][M(CN)(6)]30 H(2)O with one bridging, two partially encapsulated, and one isolated [M(CN)(6)](3-) unit. The octacyanometalates of Mo(4+/5+) and W(4+/5+) are encapsulated by two tris-macrocyclic host units. Due to the stability of the +IV oxidation state of Mo and W, only assemblies with [M(CN)(8)](4-) were obtained. The Mo(4+) and W(4+) complexes were crystallized in two different structural forms: [[Cu(3)(L)(OH(2))](2)[Mo(CN)(8)]](NO(3))(8)15 H(2)O with a structural motif that involves isolated spherical [[Cu(3)(L)(OH(2))](2)[M(CN)(8)]](8+) ions and a "string-of-pearls" type of structure [[[Cu(3)(L)](2)[M(CN)(8)]][M(CN)(8)]](NO(3))(4) 20 H(2)O, with [M(CN)(8)](4-) ions that bridge the encapsulated octacyanometalates in a two-dimensional network. The magnetic exchange coupling between the various paramagnetic centers is characterized by temperature-dependent magnetic susceptibility and field-dependent magnetization data. Exchange between the CuCu pairs in the [Cu(3)(L)](6+) "ligand" is weakly antiferromagnetic. Ferromagnetic interactions are observed in the cyanometalate assemblies with Cr(3+), exchange coupling of Mn(3+) and Fe(3+) is very small, and the octacoordinate Mo(4+) and W(4+) systems have a closed-shell ground state.     

Polyunsaturated dicarboxylate tethers connecting dimolybdenum redox and chromophoric centers: syntheses,structures, and electrochemistry

Compounds with two quadruply bonded Mo(2)(4+) units, Mo(2)(DAniF)(3) (DAniF = N,N '-di-p-anisylformamidinate), linked by unsaturated dicarboxylate dianions of various lengths have been prepared and their spectroscopic and electrochemical properties studied. As identified by the dicarboxylate linkers, these compounds are maleate (7), allene-1,3-dicarboxylate (10), cis,cis-muconate (11), trans,trans-muconate (12), octa-2,4,6-trans,trans,trans-hexatriene-1,8-dioate (tamuate, 13), and deca-2,4,6,8-trans,trans,trans,trans-octatetraene-1,10-dioate (texate, 14). The latter three molecules complete the five-membered (all trans) series [Mo(2)(DAniF)(3)](O(2)C(CH=CH)(n)CO(2))[Mo(2)(DAniF)(3)] (n = 0-4). Several unsymmetrical paddlewheel compounds of the type Mo(2)(DAniF)(3)(O(2)CX) (X = C triple bond CH (3), CH=CH(2) (4), (E)-CH=CH-CH=CH(2) (5)) have also been prepared for comparison to the molecules in which there are linked Mo(2) units. The precursors [Mo(2)(DAniF)(3)(MeCN)(2)](BPh(4)), [1]BPh(4), and Mo(2)(DAniF)(3)Cl(MeCN) (2) have also been isolated and characterized. The structures of all new molecules have been established by X-ray crystallography, including the methyl esters of various carboxylates used as ligands. All of the linked molecules have been examined by cyclic and differential pulse voltammetry, and deltaE(1/2) values, the separation between successive Mo(2)(4+)/Mo(2)(5+) oxidations, have been determined. Those compounds with highly unsaturated, fully conjugated linkers demonstrate electrochemical communication from end-to-end that is more persistent over distance than is accounted for by an electrostatic interaction alone, implying that the pi system of these dicarboxylate linkers is mediating communication. In the series [Mo(2)(DAniF)(3)](O(2)C(CH=CH)(n)CO(2))[Mo(2)(DAniF)(3)] (n = 0-4), the first oxidation potential shifts progressively to less positive values due to an increasing contribution of the polyolefinic alpha,omega-dicarboxylate to the molecular orbital undergoing oxidation. This first oxidation potential approaches a limiting value of 63 mV (vs Ag/AgCl) as n becomes infinitely long. Compound 11 can be photoisomerized to 12 in a process that is affected by the presence of the Mo(2)(4+) units, as the analogous rearrangement of dimethyl cis,cis-muconate is faster.     

Coordination chemistry of the soluble metal oxide analogue [Mo5O13(OCH3)4(NO)]3- with manganese carbonyl species

The reactions of neutral or cationic manganese carbonyl species towards the oxo-nitrosyl complex [Na(MeOH)[Mo(5)O(13)(OCH(3))(4)(NO)]](2-) have been investigated in various conditions. This system provides an unique opportunity for probing the basic reactions involved in the preparation of solid oxide-supported heterogeneous catalysts, that is, mobility of transition-metal species at the surface and dissolution-precipitation of the support. Under nitrogen and in the dark, the reaction of in situ generated fac-[Mn(CO)(3)](+) species with (nBu(4)N)(2)[Na(MeOH)-[Mo(5)O(13)(OMe)(4)(NO)]] in MeOH yields (nBu(4)N)(2)[Mn(CO)(3)(H(2)O)[Mo(5)O(13)(OMe)(4)(NO)]] at room temperature, while (nBu(4)N)(3)[Na[Mo(5)O(13)(OMe)(4)(NO)](2)[Mn(CO)(3)](2)] is obtained under reflux. The former transforms into the latter under reflux in methanol in the presence of sodium bromide; this involves the migration of the fac-[Mn(CO)(3)](+) moiety from a basal kappa(2)O coordination site to a lateral kappa(3)O site. Oxidation and decarbonylation of manganese carbonyl species as well as degradation of the oxonitrosyl starting material and reaggregation of oxo(methoxo)molybdenum fragments occur in non-deareated MeOH, and both (nBu(4)N)(4)[Mn(H(2)O)(2)[Mo(5)O(16)(OMe)(2)](2)[Mn(CO)(3)](2)] and (nBu(4)N)(4)[Mn(H(2)O)(2)[Mo(5)O(13)(OMe)(4)(NO)](2)] as well as (nBu(4)N)(2)[MnBr[Mo(5)O(13)(OMe)(4)(NO)]] have been obtained in this way. The rhenium analogue (nBu(4)N)(2)[Re(CO)(3)(H(2)O)[Mo(5)O(13)(OMe)(4)(NO)]] has also been synthesized. The crystal structures of (nBu(4)N)(2)[Re(CO)(3)(H(2)O)[Mo(5)O(13)(OMe)(4)(NO)]], (nBu(4)N)(3)[Na[Mo(5)O(13)(OMe)(4)(NO)](2)[Mn(CO)(3)](2)], (nBu(4)N)(4)[Mn(H(2)O)(2)[Mo(5)O(16)(OMe)(2)](2)[Mn(CO)(3)](2)], (nBu(4)N)(4)[Mn(H(2)O)(2)[Mo(5)O(13)(OMe)(4)(NO)](2)] and (nBu(4)N)(2)[MnBr[Mo(5)O(13)(OMe)(4)(NO)]] have been determined.     

Coordination site-dependent cation binding and multi-responsible redox properties of Janus-head metalloligand, [Mo(V)(1,2-mercaptophenolato)3

The redox-active fac-[Mo(V)(mp)(3)](-) (mp: o-mercaptophenolato) bearing asymmetric O- and S-cation binding sites can bind with several kinds of metal ions such as Na(+), Mn(II), Fe(II), Co(II), Ni(II), and Cu(I). The fac-[Mo(V)(mp)(3)](-) metalloligand coordinates to Na(+) to form the contact ion pair {Na(+)(THF)(3)[fac-Mo(V)(mp)(3)]} (1), while a separated ion pair, n-Bu(4)N[fac-Mo(V)(mp)(3)] (2), is obtained by exchanging Na(+) with n-Bu(4)N(+). In the presence of asymmetric binding-sites, the metalloligand reacts with Mn(II)Cl(2)·4H(2)O, Fe(II)Cl(2)·4H(2)O, Co(II)Cl(2)·6H(2)O, and Ni(II)Cl(2)·6H(2)O to afford UV-vis-NIR spectra, indicating binding of these guest metal cations. Especially, for the cases of the Mn(II) and Co(II) products, trinuclear complexes, {M(H(2)O)(MeOH)[fac-Mo(V)(mp)(3)](2)}·1.5CH(2)Cl(2) (3·1.5CH(2)Cl(2) (M = Mn(II)), 4·1.5CH(2)Cl(2) (M = Co(II))), are successfully isolated and structurally characterized where the M are selectively bound to the hard O-binding sites of the fac-[Mo(V)(mp)(3)](-). On the other hand, a coordination polymer, {Cu(I)(CH(3)CN)[mer-Mo(V)(mp)(3)]}(n) (5), is obtained by the reaction of fac-[Mo(V)(mp)(3)](-) with [Cu(I)(CH(3)CN)(4)]ClO(4). In sharp contrast to the cases of 1, 3·1.5CH(2)Cl(2), and 4·1.5CH(2)Cl(2), the Cu(I) in 5 are selectively bound to the soft S-binding sites, where each Cu(I) is shared by two [Mo(V)(mp)(3)](-) with bidentate or monodentate coordination modes. The second notable feature of 5 is found in the geometric change of the [Mo(V)(mp)(3)](-), where the original fac-form of 1 is isomerized to the mer-[Mo(V)(mp)(3)](-) in 5, which was structurally and spectroscopically characterized for the first time. Such isomerization demonstrates the structural flexibility of the [Mo(V)(mp)(3)](-). Spectroscopic studies strongly indicate that the association/dissociation between the guest metal ions and metalloligand can be modulated by solvent polarity. Furthermore, it was also found that such association/dissociation features are significantly influenced by coexisting anions such as ClO(4)(-) or B(C(6)F(5))(4)(-). This suggests that coordination bonds between the guest metal ions and metalloligand are not too static, but are sufficiently moderate to be responsive to external environments. Moreover, electrochemical data of 1 and 3·1.5CH(2)Cl(2) demonstrated that guest metal ion binding led to enhance electron-accepting properties of the metalloligand. Our results illustrate the use of a redox-active chalcogenolato complex with a simple mononuclear structure as a multifunctional metalloligand that is responsive to chemical and electrochemical stimuli.     

Interconversion and Reactivity of Two Heterometallic Tin-Containing Cuboidal Clusters from [Mo(3)S(4)(H(2)O)(9)](4+): X-ray Structure of the Single Cube with an Mo(3)SnS(4) Core

The Mo(3)SnS(4)(6+) single cube is obtained by direct addition of Sn(2+) to [Mo(3)S(4)(H(2)O)(9)](4+). UV-vis spectra of the product (0.13 mM) in 2.00 M HClO(4), Hpts, and HCl indicate a marked affinity of the Sn for Cl(-), with formation of the more strongly yellow [Mo(3)(SnCl(3))S(4)(H(2)O)(9)](3+) complex complete in as little as 0.050 M Cl(-). The X-ray crystal structure of (Me(2)NH(2))(6)[Mo(3)(SnCl(3))S(4)(NCS)(9)].0.5H(2)O has been determined and gives Mo-Mo (mean 2.730 ?) and Mo-Sn (mean 3.732 ?) distances, with a difference close to 1 ?. The red-purple double cube cation [Mo(6)SnS(8)(H(2)O)(18)](8+) is obtained by reacting Sn metal with [Mo(3)S(4)(H(2)O)(9)](4+). The double cube is also obtained in approximately 50% yield by BH(4)(-) reduction of a 1:1 mixture of [Mo(3)SnS(4)(H(2)O)(10)](6+) and [Mo(3)S(4)(H(2)O)(9)](4+). Conversely two-electron oxidation of [Mo(6)SnS(8)(H(2)O)(18)](8+) with [Co(dipic)(2)](-) or [Fe(H(2)O(6)](3+) gives the single cube [Mo(3)SnS(4)(H(2)O)(12)](6+) and [Mo(3)S(4)(H(2)O)(9)](4+) (up to 70% yield), followed by further two-electron oxidation to [Mo(3)S(4)(H(2)O)(9)](4+) and Sn(IV). The kinetics of the first stages have been studied using the stopped-flow method and give rate laws first order in [Mo(6)SnS(8)(H(2)O)(18)](8+) and the Co(III) or Fe(III) oxidant. The oxidation with [Co(dipic)(2)](-) has no [H(+)] dependence, [H(+)] = 0.50-2.00 M. With Fe(III) as oxidant, reaction steps involving [Fe(H(2)O)(6)](3+) and [Fe(H(2)O)(5)OH](2+) are implicated. At 25 degrees C and I = 2.00 M (Li(pts)) k(Co) is 14.9 M(-)(1) s(-)(1) and k(a) for the reaction of [Fe(H(2)O)(6)](3+) is 0.68 M(-)(1) s(-)(1) (both outer-sphere reactions). Reaction of Cu(2+) with the double but not the single cube is observed, yielding [Mo(3)CuS(4)(H(2)O)(10)](5+). A redox-controlled mechanism involving intermediate formation of Cu(+) and [Mo(3)S(4)(H(2)O)(9)](4+) accounts for the changes observed.     

How does the synthesis temperature impact hybrid organic-inorganic molybdate material design?

We investigate the reactivity of MoO(4)(2-) toward six organoammonium cations (+)(Me(3-x)H(x)N)(CH(2))(2)(NH(y)Me(3-y))(+) (x, y = 1-3) at different synthesis temperatures ranging from 70 to 180 °C. A total of 16 hybrid organic-inorganic materials have been synthesized at an initial pH of 2, via ambient pressure and hydrothermal routes, namely, (H(2)en)[Mo(3)O(10)]·H(2)O (1), (H(2)en)[Mo(3)O(10)] (2), (H(2)en)[Mo(5)O(16)] (3), (H(2)MED)(2)[Mo(8)O(26)]·2H(2)O (4), (H(2)MED)[Mo(5)O(16)] (5), (N,N-H(2)DMED)(2)[Mo(8)O(26)]·2H(2)O (6), (N,N-H(2)DMED)(2)[Mo(8)O(26)]·2H(2)O (7), (N,N'-H(2)DMED)(2)[Mo(8)O(26)] (8), (N,N'-H(2)DMED)[Mo(5)O(16)] (9), (H(2)TriMED)(2)[Mo(8)O(26)]·4H(2)O (10), (H(2)TriMED)(2)[Mo(8)O(26)]·2H(2)O (11), (H(2)TriMED)[Mo(7)O(22)] (12), (H(2)TMED)(2)[Mo(8)O(26)]·2H(2)O (13), (H(2)TMED)(2)[Mo(8)O(26)] (14), (H(2)TMED)(2)[Mo(8)O(26)] (15), and (H(2)TMED)[Mo(7)O(22)] (16). All of these compounds contain different polyoxomolybdate (Mo-POM) blocks, i.e., discrete β-[Mo(8)O(26)](4-) blocks in 6, 10, 13, 14, (1)/(∞)[Mo(3)O(10)](2-), and (1)/(∞)[Mo(8)O(26)](4-) polymeric chains in 1, 2, 4, 7, 8, and 15, respectively, and (2)/(∞)[Mo(5)O(16)](2-) and (2)/(∞)[Mo(7)O(22)](2-) layers in 3, 5, 9, 12, and 16, respectively. The structures of 5, 9, and 14 have been resolved by single-crystal X-ray analyses. The characterization of the different Mo-POM blocks in 1-16 by Fourier transform Raman spectroscopy is reported. The impact of the synthesis temperature on both the composition and topology of the Mo-POM blocks is highlighted.     

Organic-inorganic hybrid materials: hydrothermal syntheses and structural characterization of bimetallic organophosphonate oxides of the type Mo/Cu/O/RPO(3)(2-)/organoimine

The hydrothermal reactions of a Cu(II) starting material, a molybdate source, 2,2'-bipyridine or terpyridine, and the appropriate alkyldiphosphonate ligand yield two series of bimetallic organophosphonate hybrid materials of the general types [Cu(n)(bpy)(m)Mo(x)O(y)(H(2)O)(p)[O(3)P(CH(2))(n)PO(3)](z)] and [Cu(n)(terpy)(m)Mo(x)O(y)(H(2)O)(p)[O(3)P(CH(2))(n)PO(3)](z)]. The bipyridyl series includes the one-dimensional materials [Cu(bpy)(MoO(2))(H(2)O)(O(3)PCH(2)PO(3))] (1) and [[Cu(bpy)(2)][Cu(bpy)(H(2)O)](Mo(5)O(15))(O(3)PCH(2)CH(2)CH(2)CH(2)PO(3))].H(2)O (5.H(2)O) and the two-dimensional hybrids [Cu(bpy)(Mo(2)O(5))(H(2)O)(O(3)PCH(2)PO(3))].H(2)O (2.H(2)O), [[Cu(bpy)](2)(Mo(4)O(12))(H(2)O)(2)(O(3)PCH(2)CH(2)PO(3))].2H(2)O (3.2H(2)O), and [Cu(bpy)(Mo(2)O(5))(O(3)PCH(2)CH(2)CH(2)PO(3))](4). The terpyridyl series is represented by the one-dimensional [[Cu(terpy)(H(2)O)](2)(Mo(5)O(15))(O(3)PCH(2)CH(2)PO(3))].3H(2)O (7.3H(2)O) and the two-dimensional composite materials [Cu(terpy)(Mo(2)O(5))(O(3)PCH(2)PO(3))] (6) and [[Cu(terpy)](2)(Mo(5)O(15))(O(3)PCH(2)CH(2)CH(2)PO(3))] (8). The structures exhibit a variety of molybdate building blocks including isolated [MoO(6)] octahedra in 1, binuclear subunits in 2, 4, and 6, tetranuclear embedded clusters in 3, and the prototypical [Mo(5)O(15)(O(3)PR)(2)](4-) cluster type in 5, 7, and 8. These latter materials exemplify the building block approach to the preparation of extended structures.     

Synthesis, characterization, and photoresponsive properties of a series of Mo(IV)-Cu(II) complexes

Six Mo(IV)-Cu(II) complexes, [Cu(tpa)](2)[Mo(CN)(8)]·15H(2)O (1, tpa = tris(2-pyridylmethyl)amine), [Cu(tren)](2)[Mo(CN)(8)]·5.25H(2)O (2, tren = tris(2-aminoethyl)amine), [Cu(en)(2)][Cu(0.5)(en)][Cu(0.5)(en)(H(2)O)][Mo(CN)(8)]·4H(2)O (3, en = ethylenediamine), [Cu(bapa)](3)[Mo(CN)(8)](1.5)·12.5H(2)O (4, bapa = bis(3-aminopropyl)amine), [Cu(bapen)](2)[Mo(CN)(8)]·4H(2)O (5, bapen = N,N'-bis(3-aminopropyl)ethylenediamine), and [Cu(pn)(2)][Cu(pn)][Mo(CN)(8)]·3.5H(2)O (6, pn = 1,3-diaminopropane), were synthesized and characterized. Single-crystal X-ray diffraction analyses show that 1-6 have different structures varying from trinuclear clusters (1-2), a one-dimensional belt (3), two-dimensional grids (4-5), to a three-dimensional structure (6). Magnetic and ESR measurements suggest that 1-6 exhibit thermally reversible photoresponsive properties on UV light irradiation through a Mo(IV)-to-Cu(II) charge transfer mechanism. A trinuclear compound [Cu(II)(tpa)](2)[Mo(V)(CN)(8)](ClO(4)) (7) was synthesized as a model of the photoinduced intermediate.     

O-atom-transfer oxidation of [molybdenum(IV) oxo{3,6-(acylamino)2- 1,2-benzenedithiolato}2]2- promoted by intramolecular NH...S hydrogen bonds

Novel molybdenum dithiolene compounds having neighboring amide groups as models for molybdoenzymes, (NEt(4))(2)[Mo(IV)O{1,2-S(2)-3,6-(RCONH)(2)C(6)H(2)}(2)] (R = CH(3), CF(3), t-Bu, Ph(3)C), were designed and synthesized. The contributions of the NH...S hydrogen bond to the electrochemical properties of the metal ion and the reactivity of the O-atom-transfer reaction were investigated by a comparison with [Mo(IV)O(1,2-S(2)C(6)H(4))(2)](2)(-). The MoOS(4) core of [Mo(IV)O{1,2-S(2)-3,6-(CH(3)CONH)(2)C(6)H(2)}(2)](2)(-) shows no significant geometrical difference from that of [Mo(IV)O(1,2-S(2)C(6)H(4))(2)](2)(-) in the crystal. The hydrogen bonds positively shifted the Mo(IV/V) redox potential and accelerated the reduction of Me(3)NO.     

Solid-state coordination chemistry of the oxomolybdate-organodiphosphonate/nickel-organoimine system: structural influences of the secondary metal coordination cation and diphosphonate tether lengths

The hydrothermal reactions of a molybdate source, a nickel(II) salt, tetra-2-pyridylpyrazine (tpyprz), and organodiphosphonic acids H(2)O(3)P(CH(2))(n)()PO(3)H(2) (n = 1-5) of varying tether lengths yielded a series of organic-inorganic hybrid materials of the nickel-molybdophosphonate family. A persistent characteristic of the structural chemistry is the presence of the [Mo(5)O(15)(O(3)PR)(2)](4)(-) cluster as a molecular building block, as noted for the one-dimensional materials [[Ni(2)(tpyprz)(2)]Mo(5)O(15)[O(3)P(CH(2))(4)PO(3)]]x6.65H(2)O (6x6.65H(2)O) and [[Ni(2)(tpyprz)(2)]Mo(5)O(15)[O(3)P(CH(2))(5)PO(3)]]x3.75H(2)O (8x3.75H(2)O), the two-dimensional phases [[Ni(4)(tpyprz)(3)][Mo(5)O(15)(O(3)PCH(2)CH(2)PO(3))](2)]x23H(2)O (3x23H(2)O) and [[Ni(3)(tpyprz)(2)(H(2)O)(2)](Mo(5)O(15))(Mo(2)O(4)F(2))[O(3)P(CH(2))(3)PO(3)](2)]x8H(2)O (5x8H(2)O), and the three-dimensional structures [[Ni(2)(tpyprz)(H(2)O)(3)]Mo(5)O(15)[O(3)P(CH(2))(3)PO(3))]]xH(2)O (4xH(2)O) and [[Ni(2)(tpyprz)(H(2)O)(2)]Mo(5)O(15) [O(3)P(CH(2))(4)PO(3)]]x2.25H(2)O (7x2.25H(2)O). In the case of methylenediphosphonic acid, the inability of this ligand to tether adjacent pentanuclear clusters precludes the formation of the common molybdophosphonate building block, manifesting in contrast a second structural motif, the trinuclear [(Mo(3)O(8))(x)(O(3)PCH(2)PO(3))(y)] subunit of [[Ni(tpyprz)(H(2)O)(2)](Mo(3)O(8))(2) (O(3)PCH(2)PO(3))(2)] (1) which had been previously observed in the corresponding methylenediphosphonate phases of the copper-molybdophosphonate family. Methylenediphosphonic acid also provides a second phase, [Ni(2)(tpyprz)(2)][Mo(7)O(21)(O(3)PCH(2)PO(3))]x3.5H(2)O (9x5H(2)O), which contains a new heptamolybdate cluster [Mo(7)O(21)(O(3)PCH(2)PO(3))](4)(-) and a cationic linear chain [Ni(tpyprz)](n)(4n+) substructure. The structural chemistry of the nickel-molybdophosphonate series contrasts with that of the corresponding copper-molybdophosphonate materials, reflecting in general the different coordination preferences of Ni(II) and Cu(II). Consequently, while the Cu(II)-organic complex building block of the copper family is invariably the binuclear [Cu(2)(tpyprz)](4+) subunit, the Ni(II) chemistry with tpyprz exhibits a distinct tendency toward catenation to provide [Ni(3)(tpyprz)(2)](6+), [Ni(4)(tpyprz)(3)](8+), and [Ni(tpyprz)](n)(4n+) building blocks as well as the common [Ni(2)(tpyprz)](4+) moiety. This results in a distinct structural chemistry for the nickel(II)-molybdophosphonate series with the exception of the methylenediphosphonate derivative 1 which is isostructural with the corresponding copper compound [[Cu(2)(tpyprz)(H(2)O)(2)](Mo(3)O(8))(2)(O(3)PCH(2)PO(3))] (2). The structural chemistry of the nickel(II) series also reflects variability in the number of attachment sites at the molybdophosphonate clusters, in the extent of aqua ligation to the Ni(II) tpyprz subunit, and in the participation of phosphate oxygen atoms as well as molybdate oxo groups in linking to the nickel sites.     

Strong electronic interaction between two dimolybdenum units linked by a tetraazatetracene

The large rigid dianion fluoflavinate, C(14)H(8)N(4)(2)(-), consisting of four fused and planar six-membered rings with four nitrogen donor atoms, has been used to link two metal-to-metal bonded and redox-active Mo(2)(n)()(+) units which are each locally bridged by three additional groups, collectively denoted [Mo(2)]. In 1, the [Mo(2)] units are Mo(2)(DAniF)(3) (DAniF = N,N'-di-p-anisylformamidinate), and in 5, they are trans-Mo(2)(DAniF)(2)(O(2)CCH(3)) groups. These [Mo(2)](fluoflavinate)[Mo(2)] compounds show three reversible one-electron oxidation steps, one more than all other [Mo(2)](linker)[Mo(2)] species known to date. The first two redox processes are metal-based, and the third one has been assigned to a ligand oxidation by comparison to that of paddlewheel compound 4 which contains only one dimolybdenum unit with a monoanionic fluoflavinate ligand. Chemical oxidations of 1 produce the singly- and doubly-oxidized species 2 and 3, respectively. All compounds have been characterized by X-ray crystallography and, as appropriate, by various techniques such as NMR, EPR, near-IR, and UV-vis. The fluoflavinate ligand strongly mediates electronic communication between the dimetal units, and the mixed valence species 2 can be described as electronically delocalized. Calculations at the DFT level using a variety of functionals support such an assignment and indicate that a strong transition in the NIR for the singly oxidized species can be assigned to the HOMO-1 to SOMO transition.     

Modifying electronic communication in dimolybdenum units by linkage isomers of bridged oxamidate dianions

Reactions of Mo(2)(O(2)CCH(3))(DAniF)(3), DAniF = N,N'-di-p-anisylformamidinate, with oxamidate dianions [ArNC(O)C(O)NAr](2-), Ar = C(6)H(5) and p-anisyl, give pairs of isomeric compounds where the [Mo(2)] units are bridged by the oxamidate anions. For the alpha isomers, the C-C unit of the dianion is nearly perpendicular to the Mo-Mo bonds, and these are essentially perpendicular to each other. For the beta isomers, the corresponding C-C unit and the Mo-Mo bonds are essentially parallel to each other. Each type of isomer is stable in solution. The electronic communication as measured by the DeltaE(1/2) for the oxidation of each of the Mo(2) units is significantly better for the beta isomers. This is supported also by the appearance of what is conventionally called an intervalence charge-transfer band in the near infrared region upon oxidation of the beta isomers but not the alpha isomers. Molecular mechanics and DFT calculations help explain the relative conformations in the alpha isomers and the relative energy differences between the alpha and beta isomers.     

Novel aggregation of [Ni(thiolato)2(amine)2]-type square planes assisted by silver(I) ions

Treatment of [Ni(L)][L =((-)SCH(2)CH(2)NH[double bond, length as m-dash]C(CH(3))-)(2)] with Ag(+) in water gave a pinwheel-like S-bridged Ni(II)(3)Ag(I)(2) structure in [Ag(2)[Ni(L)](3)](2+), which further reacted with [Ni(L)] to produce a Ni(II)(4)Ag(I)(2) structure in [Ag(2)[Ni(L)](4)](2+) and a Ni(II)(7)Ag(I)(4) structure in [Ag(4)[Ni(L)](7)](4+).     

Polyoxomolybdodiphosphonates: examples incorporating ethylidenepyridines

We have synthesized and structurally characterized three pyridylethylidene-functionalized diphosphonate-containing polyoxomolybdates, [{Mo(VI)O(3)}(2){Mo(V)(2)O(4)}{HO(3)PC(O)(CH(2)-3-C(5)NH(4))PO(3)}(2)](6-) (1), [{Mo(VI)(2)O(6)}(2){Mo(V)(2)O(4)}{O(3)PC(O)(CH(2)-3-C(5)NH(4))PO(3)}(2)](8-) (2), and [{Mo(V)(2)O(4)(H(2)O)}(4){O(3)PC(O)(CH(2)-3-C(5)NH(4))PO(3)}(4)](12-) (3). Polyanions 1-3 were prepared in a one-pot reaction of the dinuclear, dicationic {Mo(V)(2)O(4)(H(2)O)(6)}(2+) with 1-hydroxo-2-(3-pyridyl)ethylidenediphosphonate (Risedronic acid) in aqueous solution. Polyanions 1 and 2 are mixed-valent Mo(VI/V) species with open tetranuclear and hexanuclear structures, respectively, containing two diphosphonate groups. Polyanion 3 is a cyclic octanuclear structure based on four {Mo(V)(2)O(4)(H(2)O)} units and four diphosphonates. Polyanions 1 and 2 crystallized as guanidinium salts [C(NH(2))(3)](5)H[{Mo(VI)O(3)}(2){Mo(V)(2)O(4)}{HO(3)PC(O)(CH(2)-3-C(5)NH(4))PO(3)}(2)]·13H(2)O (1a) and [C(NH(2))(3)](6)H(2)[{Mo(VI)(2)O(6)}(2){Mo(V)(2)O(4)}{O(3)PC(O)(CH(2)-3-C(5)NH(4))PO(3)}(2)]·10H(2)O (2a), whereas polyanion 3 crystallized as a mixed sodium-guanidinium salt, Na(8)[C(NH(2))(3)](4)[{Mo(V)(2)O(4)(H(2)O)}(4){O(3)PC(O)(CH(2)-3-C(5)NH(4))PO(3)}(4)]·8H(2)O (3a). The compounds were characterized in the solid state by single-crystal X-ray diffraction, IR spectroscopy, and thermogravimetric and elemental analyses. The formation of polyanions 1 and 3 is very sensitive to the pH value of the reaction solution, with exclusive formation of 1 above pH 7.4 and 3 below pH 6.6. Detailed solution studies by multinuclear NMR spectrometry were performed to study the equilibrium between these two compounds. Polyanion 2 was insoluble in all common solvents. Detailed computational studies on the solution phases of 1 and 3 indicated the stability of these polyanions in solution, in complete agreement with the experimental findings.     

Polyfluorinated quaternary ammonium salts of polyoxometalate anions: fluorous biphasic oxidation catalysis with and without fluorous solvents

[reaction: see text] Polyfluorinated quaternary ammonium cations, [CF(3)(CF(2))(7)(CH(2))(3)](3)CH(3)N(+) (R(F)N(+)), were synthesized and used as countercations for the [WZnM(2)(H(2)O)(2)(ZnW(9)O(34))(2)](12)(-) (M = Mn(II), Zn(II)) polyoxometalate. The (R(F)N(+))(12)[WZnM(2)(H(2)O)(2)(ZnW(9)O(34))(2)] compounds were fluorous biphasic catalysts for alcohol and alkenol oxidation, and alkene epoxidation with aqueous hydrogen peroxide. Reaction protocols with or without a fluorous solvent were tested. The catalytic activity and selectivity was affected by both the hydrophobicity of the solvent and the substrate.     

Supramolecular structural variations with changes in anion and solvent in silver(I) complexes of a semirigid, bitopic tris(pyrazolyl)methane ligand

The bitopic ligand p-C(6)H(4)[CH(2)OCH(2)C(pz)(3)](2) (pz = pyrazolyl ring) that contains two tris(pyrazolyl)methane units connected by a semirigid organic spacer reacts with silver(I) salts to yield [p-C(6)H(4)[CH(2)OCH(2)C(pz)(3)](2)(AgX)(2)]( infinity ), where X = CF(3)SO(3)(-) (1), SbF(6)(-) (2), PF(6)(-) (3), BF(4)(-) (4), and NO(3)(-) (5). Crystallization of the first three compounds from acetone yields [p-C(6)H(4)[CH(2)OCH(2)C(pz)(3)](2)(AgCF(3)SO(3))(2)]( infinity ) (1a), [p-C(6)H(4)[CH(2)OCH(2)C(pz)(3)](2)(AgSbF(6))(2)[(CH(3))(2)CO](2)]( infinity ) (2b), and [p-C(6)H(4)[CH(2)OCH(2)C(pz)(3)](2)AgPF(6)]( infinity ) (3a), where the stoichiometry for the latter compound has changed from a metal:ligand ratio of 2:1 to 1:1. The structure of 1a is based on helical argentachains constructed by a kappa(2)-kappa(1) coordination to silver of the tris(pyrazolyl)methane units. These chains are organized into a tubular 3D structure by cylindrical [(CF(3)SO(3))(6)](6)(-) clusters that form weak C-H...O hydrogen bonds with the bitopic ligand. The same kappa(2)-kappa(1) coordination is present in the structure of 2a, but the structure is organized by six different tris(pyrazolyl)methane units from six ligands bonding with six silvers to form a 36-member argentamacrocycle core. The cores are organized in a tubular array by the organic spacers where each pair of macrocycles sandwich six acetone molecules and one SbF(6)(-) counterion. The structure of 3a is based on a kappa(2)-kappa(0) coordination mode of each tris(pyrazolyl)methane unit forming a helical coordination polymer, with two strands organized in a double stranded helical structure by a series of C-H...pi interactions between the central arene rings. Crystallization of 2-4 from acetonitrile yields complexes of the formula [p-C(6)H(4)[CH(2)OCH(2)C(pz)(3)](2)[(AgX)(2)(CH(3)CN)(n)]]( infinity ) where n = 2 for X = SbF(6)(-) (2b), X = PF(6)(-) (3b) and n = 1 for X = BF(4)(-) (4b). All three structures contain argentachains formed by a kappa(2)-kappa(1) coordination mode of the tris(pyrazolyl)methane units linked by the organic spacer and arranged in a 2D sheet structure with the anions sandwiched between the sheets. Crystallization of 5 from acetonitrile yields crystals of the formula [p-C(6)H(4)[CH(2)OCH(2)C(pz)(3)](2)(AgNO(3))(2)(CH(3)CN)(4)]( infinity ), where the nitrate is bonded to the silver. The argentachains, again formed by kappa(2)-kappa(1) coordination, are arranged in W-shaped sheets that have an overall configuration very different from 2b-4b. Treating [p-C(6)H(4)[CH(2)OCH(2)C(pz)(3)](2)(AgSbF(6))(2)]( infinity ) with a saturated aqueous solution of KPF(6) or KO(3)SCF(3) slowly leads to complete exchange of the anion. Crystallization of a sample that contains an approximately equal mixture of SbF(6)(-)/PF(6)(-) from acetonitrile yields [p-C(6)H(4)[CH(2)OCH(2)C(pz)(3)](2)[Ag(2)(PF(6))(0.78(1))(SbF(6))(1.22(1))(CH(3)CN)(2)][(CH(3)CN)(0.25) (C(4)H(10)O)(0.25)]]( infinity ), a compound with a sheet structure analogous to 2b-4b. Crystallization of the same mixture from acetone yields [p-C(6)H(4)[CH(2)OCH(2)C(pz)(3)](2)(AgSbF(6))[(CH(3))(2)CO](1.5)]( infinity ), where the metal-to-ligand ratio is 1:1 and the [C(pz)(3)] units are kappa(2)-kappa(0) bonded forming a coordination polymer. The supramolecular structures of all species are organized by a combination of C-H...pi, pi-pi, or weak C-H-F(O) hydrogen bonding interactions.