Spherical Particles of Zirconia-Titania of Hexagonal Structure from a Neutral Amine Route

Through the sol–gel process, using the so-called neutral amine route, spherical particles of 1:1 zirconia–titania were synthesized from zirconium(IV) and titanium(IV) butoxides as well as 1,12-diaminododecane as precursor species. The obtained product exhibited a hexagonal structure, as determinated by X-ray diffraction data. The obtained material was also characterized by thermogravimetry, differential scanning calorimetry, infrared spectroscopy, scanning electron microscopy, and surface area measurements. Despite the release of template molecules on heating, the spherical morphology was retained up to about 1200°C, at which the disruption of the spheres took place.     

Influences of changes in multitopic tris(pyrazolyl)methane ligand topology on silver(I) supramolecular structures

The reactions between silver tetrafluoroborate and the ligands 1,2,4,5-C(6)H(2)[CH(2)OCH(2)C(pz)(3)](4) (L1, pz = pyrazolyl ring), o-C(6)H(4)[CH(2)OCH(2)C(pz)(3)](2) (L2), and m-C(6)H(4)[CH(2)OCH(2)C(pz)(3)](2) (L3) yield coordination polymers of the formula (C(6)H(6)(-)(n)[CH(2)OCH(2)C(pz)(3)](n)(AgBF4)(m))( infinity ) (n = 4, m = 2, 1; n = 2, ortho substitution, m = 1, 2; meta substitution, m = 2, 3). In the solid state, L2 molecules dimerize by a pair of C-H.pi interactions, forming an arrangement that resembles the tetratopic ligand L1. In the solid-state structure of 1, each silver atom is kappa(2)-bonded to two tris(pyrazolyl)methane units from different ligands with the overall structure a polymer made up from 32-atom macrocyclic rings formed by bonding tris(pyrazolyl)methane groups from nonadjacent positions on the central arene rings to the same two silver atoms. In 2, each silver is bonded to two tris(pyrazolyl)methane units in the same kappa(2)-kappa(2) fashion as with 1, forming a polymer chain. The chains are organized into dimeric units by strong face-to-face pi-pi stacking between the central arene rings making bitopic L2 act as half of tetratopic L1. The chains in both structures are organized by weak C-H.F hydrogen bonds and pi-pi stacking interactions into very similar 3D supramolecular architectures. The structure of 3 contains three types of silvers with the overall 3D supramolecular sinusoidal structure comprised of 32-atom macrocycles. Infrared studies confirm the importance of the noncovalent interactions. Calculations at the DFT (B3LYP/6-31G) level of theory have been carried out on L2 and also support C-H.pi interactions. Electrospray mass spectral data collected from acetone or acetonitrile show the presence of aggregated species such as [(L)Ag(2)(BF(4))](+) and [(L)Ag(2)](2+), despite the fact that (1)H NMR spectra of all compounds show that acetonitrile completely displaces the ligand whereas acetone does not.     

Effects of Adsorbed Polyaniline on Redox Process on MoO3 Surface

The effects exhibited by adsorbed conducting polyaniline on the redox process on a molybdenum oxide surface were studied. Thermogravimetric results indicate a 4% polyaniline deposition. Cyclic voltammograms of the adsorbed polymer on MoO3 show that polyaniline exerts remarkable effects on the molybdenum blue oxidation-reduction process, with oxidation and reduction potentials of 0.33 and 0.18 V, respectively. This effect strongly enhances the electrode response, and can be used as an important tool in qualitative and/or quantitative determinations of molybdenum in solution as well as in any substrate. Copyright 1999 Academic Press.     

Supramolecular structural variations with changes in anion and solvent in silver(I) complexes of a semirigid, bitopic tris(pyrazolyl)methane ligand

The bitopic ligand p-C(6)H(4)[CH(2)OCH(2)C(pz)(3)](2) (pz = pyrazolyl ring) that contains two tris(pyrazolyl)methane units connected by a semirigid organic spacer reacts with silver(I) salts to yield [p-C(6)H(4)[CH(2)OCH(2)C(pz)(3)](2)(AgX)(2)]( infinity ), where X = CF(3)SO(3)(-) (1), SbF(6)(-) (2), PF(6)(-) (3), BF(4)(-) (4), and NO(3)(-) (5). Crystallization of the first three compounds from acetone yields [p-C(6)H(4)[CH(2)OCH(2)C(pz)(3)](2)(AgCF(3)SO(3))(2)]( infinity ) (1a), [p-C(6)H(4)[CH(2)OCH(2)C(pz)(3)](2)(AgSbF(6))(2)[(CH(3))(2)CO](2)]( infinity ) (2b), and [p-C(6)H(4)[CH(2)OCH(2)C(pz)(3)](2)AgPF(6)]( infinity ) (3a), where the stoichiometry for the latter compound has changed from a metal:ligand ratio of 2:1 to 1:1. The structure of 1a is based on helical argentachains constructed by a kappa(2)-kappa(1) coordination to silver of the tris(pyrazolyl)methane units. These chains are organized into a tubular 3D structure by cylindrical [(CF(3)SO(3))(6)](6)(-) clusters that form weak C-H...O hydrogen bonds with the bitopic ligand. The same kappa(2)-kappa(1) coordination is present in the structure of 2a, but the structure is organized by six different tris(pyrazolyl)methane units from six ligands bonding with six silvers to form a 36-member argentamacrocycle core. The cores are organized in a tubular array by the organic spacers where each pair of macrocycles sandwich six acetone molecules and one SbF(6)(-) counterion. The structure of 3a is based on a kappa(2)-kappa(0) coordination mode of each tris(pyrazolyl)methane unit forming a helical coordination polymer, with two strands organized in a double stranded helical structure by a series of C-H...pi interactions between the central arene rings. Crystallization of 2-4 from acetonitrile yields complexes of the formula [p-C(6)H(4)[CH(2)OCH(2)C(pz)(3)](2)[(AgX)(2)(CH(3)CN)(n)]]( infinity ) where n = 2 for X = SbF(6)(-) (2b), X = PF(6)(-) (3b) and n = 1 for X = BF(4)(-) (4b). All three structures contain argentachains formed by a kappa(2)-kappa(1) coordination mode of the tris(pyrazolyl)methane units linked by the organic spacer and arranged in a 2D sheet structure with the anions sandwiched between the sheets. Crystallization of 5 from acetonitrile yields crystals of the formula [p-C(6)H(4)[CH(2)OCH(2)C(pz)(3)](2)(AgNO(3))(2)(CH(3)CN)(4)]( infinity ), where the nitrate is bonded to the silver. The argentachains, again formed by kappa(2)-kappa(1) coordination, are arranged in W-shaped sheets that have an overall configuration very different from 2b-4b. Treating [p-C(6)H(4)[CH(2)OCH(2)C(pz)(3)](2)(AgSbF(6))(2)]( infinity ) with a saturated aqueous solution of KPF(6) or KO(3)SCF(3) slowly leads to complete exchange of the anion. Crystallization of a sample that contains an approximately equal mixture of SbF(6)(-)/PF(6)(-) from acetonitrile yields [p-C(6)H(4)[CH(2)OCH(2)C(pz)(3)](2)[Ag(2)(PF(6))(0.78(1))(SbF(6))(1.22(1))(CH(3)CN)(2)][(CH(3)CN)(0.25) (C(4)H(10)O)(0.25)]]( infinity ), a compound with a sheet structure analogous to 2b-4b. Crystallization of the same mixture from acetone yields [p-C(6)H(4)[CH(2)OCH(2)C(pz)(3)](2)(AgSbF(6))[(CH(3))(2)CO](1.5)]( infinity ), where the metal-to-ligand ratio is 1:1 and the [C(pz)(3)] units are kappa(2)-kappa(0) bonded forming a coordination polymer. The supramolecular structures of all species are organized by a combination of C-H...pi, pi-pi, or weak C-H-F(O) hydrogen bonding interactions.     

Differing Coordination Modes of (O‐Alkyl)‐p‐Ethoxyphenyldithiophosphonato Ligands in Copper(I), Silver(I) and Gold(I) Triphenylphosphine Complexes

The three (O‐methyl)‐p‐ethoxyphenyldithiophosphonato triphenylphosphine complexes of copper, silver and gold, [(Ph₃P)_nM{S₂P(OMe)C₆H₄OEt‐p}] (M = Cu, n = 2; M = Ag, Au, n = 1) investigated structurally by X‐ray diffraction exhibit remarkable structural differences. The copper compound is a four‐coordinate chelate monomer with Cu–S 2.4417(6) and 2.5048(6) Å; P–Cu–S 104.24(2)–114.01(2)°; Cu–S–P 82.49(3)° and 80.85(2)°. The silver compound is a cyclic dimer with bridging dithiophosphonato ligands and three‐coordinate silver atoms [Ag–S 2.5371(5) and 2.6867(5) Å; P–Ag–S 122.88(2)° and 122.17(2)°; Ag–S–P 89.32(2)° and 103.56(2)°]. The gold compound is monomeric with linear dicoordinate gold [Au–S 2.3218(6) Å; P–Au–S 177.72(2)°, Au–S–P 100.97(3)°].     

Crystal retro-engineering: structural impact on silver(I) complexes with changing complexity of tris(pyrazolyl)methane ligands

The preparation and structures of seven new silver(I) complexes involving the parent tris(pyrazolyl)methane unit, [C(pz)(3)], as the donor set, {[C6H5CH2OCH2C(pz)3]Ag}(BF4), {[C6H5CH2OCH2C(pz)3]2Ag3}(CF3SO3)3, {[HOCH2C(pz)3]Ag}(BF4), {[HOCH2C(pz)3]Ag}(CF3SO3), {[HC(pz)3]2Ag2(CH3CN)}(BF4)2, {[HC(pz)3]Ag}(PF6), and {[HC(pz)3]Ag}(CF3SO3), are reported. This project is based on a retro-design of our multitopic C6H(6-n)[CH2OCH2C(pz)3]n (pz = pyrazolyl ring, n = 2, 3, 4, and 6) family of ligands in such a way that each new ligand has one fewer organizational feature. The kappa2-kappa1 bonding mode of the [C(pz)3] units to two silvers, also observed with the multitopic ligands, is the dominant structural feature in all cases. Changing the counterion has important effects on the local structures and on crystal packing. When these structures are compared to similar ones based on the multitopic C6H(6-n)[CH2OCH2C(pz)3]n ligands, it has been shown that the presence of the rigid parts (central arene core and the [C(pz)3] units) are important in order to observe highly organized supramolecular structures. The presence of the flexible ether linkage is also crucial, allowing all noncovalent forces to manifest themselves in a cumulative and complementary manner.     

HL-2M 装置电子回旋共振加热及电流驱动系统设计与研制进展

根据 HL-2M 装置物理实验加热的需求,完成了总功率为 8MW 的电子回旋共振加热及电流驱动 (ECRH/ECCD)系统设计,开展了波源、传输及天线等关键部件研制。8MW ECRH/ECCD 系统,由 8 套 105GHz/  1MW/3s 波源系统、8 条内径为 63.5mm 的真空传输线及三套极向实时可控的发射天线构成。目前,已完成 ECRH/ECCD 系统关键部件研制及其相关的桌面与高功率性能测试。测试结果表明,微波源回旋管输出微波功率 达到1MW/3s,在真空度为 10^‒2Pa 的过模波纹圆波导传输线中能低耗稳定传输,发射天线极向全量程角度转动响 应时间在 50ms 以内。      

Structural comparisons of silver(I) complexes of third-generation ligands built from tridentate (o-C(6)H(4)[CH(2)OCH(2)C(pz)(3)](2)) versus bidentate poly(1-pyrazolyl)methane units (o-C(6)H(4)[CH(2)OCH(2)CH(pz)(2)](2)) (pz = pyrazolyl ring)

The new bitopic, bis(1-pyrazolyl)methane-based ligand o-C6H4[CH2OCH2CH(pz)2]2 (L2, pz = pyrazolyl ring) is prepared from the reaction of (pz)2CHCH2OH (obtained from the reduction of (pz)2CHCOOH with BH3.S(CH3)2) with NaH, followed by the addition of alpha,alpha'-dibromo-o-xylene. The reaction of L2 with AgPF6 or AgO3SCF3 yields {o-C6H4[CH2OCH2CH(pz)2]2(AgPF6)}n or {o-C6H4[CH2OCH2CH(pz)2]2(AgO3SCF3)}n, respectively. Both compounds in the solid state have tetrahedral silver(I) centers arranged in a 1D coordination polymer network. The analogous ligand based on tris(1-pyrazolyl)methane units, o-C6H4[CH2OCH2C(pz)3]2 (L3), reacts with AgO3SCF3 to form a similar coordination polymer, {o-C6H4[CH2OCH2C(pz)3]2(AgO3SCF3)}n. In this case, each tris(pyrazolyl)methane unit in L3 adopts the kappa2-kappa0 bonding mode. Crystallization of a 3:1 mixture of AgO3SCF3 and L3 yields {o-C6H4[CH2OCH2C(pz)3]2(AgO3SCF3)2}n, in which the tris(1-pyrazolyl)methane units adopt a kappa2-kappa1 coordination mode.     

Directional control of pi-stacked building blocks for crystal engineering: the 1,8-naphthalimide synthon

Incorporating the 1,8-naphthalimide group into bis(pyrazolyl)methane ligands triggers the association of their rhenium(i) complexes into directionally ordered dimers in both solution and solid state, as demonstrated by ES+/MS, PGSE-NMR and X-ray diffraction studies.     

Effects of Adsorbed Polyaniline on Redox Processes on As(2)O(3) Surfaces

Polyaniline deposited on As(2)O(3) surface resulted in a new material, which was characterized by infrared spectoscopy, thermogravimetry, differential scanning calorimetry, scanning electron microscopy, X-ray diffraction, and cyclic voltammetry. The mass percentage of polymer deposited on oxide surface is approximately 13%. The scanning electron microscopy images as well as the X-ray diffraction patterns provided conclusive evidence that the oxide surface is coated by the polymer. The cyclic voltammograms of the polyaniline adsorbed on As(2)O(3) surface showed that the adsorbate exerts remarkable effects on redox processes on this oxide. The pure oxide exhibited two oxidation/reduction peaks at 0.25/-0.06 and 0.47/-0.25 V attributed tentatively to the processes As(2)O(3)(s)+6H(+)+6e(-)=2As(s)+3H(2)O and As(s)+3H(+)+3e(-)=AsH(3)(g), respectively. The polyaniline-coated sample exhibited a better-defined voltammogram in which the first oxidation peak of the oxide had its intensity increased about four times. Copyright 2000 Academic Press.