N(epsilon) functionalization of metal and organic protected L-histidine for a highly efficient,direct labeling of biomolecules with [Tc(OH2)3(CO)3]+

Two different pathways for the introduction of an acetyl group at N(epsilon ) in a N(alpha), N(delta), and -COO protected histidine to afford N(epsilon)-(CH(2)COOH)-histidine derivative 7 b are presented. The purpose of this study is the coupling of 7 b to amino groups in bioactive molecules such as peptides. After full deprotection of such a bioconjugate, histidine provides three coordination sites which efficiently coordinate to [(99m)Tc(OH(2))(3)(CO)(3)](+) or [Re(OH(2))(3)(CO)(3)](+) in a facial geometry. This allows the development of novel radiopharmaceuticals. Selective derivatization at the N(epsilon) position has conveniently been achieved by concomitant protection of N(alpha) and N(delta) with a carbonyl group forming a six-membered urea. Cyclic urea ring opening with Fm-OH, coupling of phenylalanine as a model to 7 b through its primary amine and removing of all protecting groups in one step gave a histidine derivative of phenylalanine which could be labeled at 10(-5) M with (99m)Tc in very high yield and even in about 50 % yield at 10(-6) M. The Xray structure of a complex with [Re(CO)(3)](+) in which anilin is coupled to 7 b confirms the facial arrangement of histidine. A second pathway applies directly the [Re(CO)(3)](+) moiety as a protecting group. This is one of the rare examples in which a metal fragment is used as a protecting group for organic functionalities. The coordination to histidine protects the N(alpha), N(delta) and COO group in one single step, subsequent alkylation with BrCH(2)COOH(R) at N(epsilon), coupling to phenylalanine and oxidative deprotection of [Re(CO)(3)](+) to [ReO(4)](-) gave the corresponding bioconjugate in which histidine is coupled to phenylalanine through an acetylamide at N(epsilon). Both methods offer convenient pathways to introduce histidine in a biomolecule under retention of its three coordination sites. The procedures are adaptable to any biomolecule with pendant amines and allow the development of novel radiopharmaceuticals or inversed peptides.     

Chelates formed by a constrained bis(diphenylphosphino)xylene; the crystal structures of [FeCl2(anphos)] and [RhCl(CO)(anphos-monoxide)]

The indan derived diphosphine, cis-1,3-(diphenylphosphino)indan (anphos) is synthesised by the addition of Ph₂P(BH₃)Li to cis-1,3-dibromoindan followed by deprotection with diethylamine. Anphos readily forms the bicyclic chelates [RhCl(CO)(anphos)], [PtCl₂(anphos)], [PtCl(Me)(anphos)] and [FeCl₂(anphos)]. The crystal structures of [FeCl₂(anphos)] and the monoxide complex, [RhCl(CO)(anphosO)] have been determined. Reaction of the diphosphine with [Rh(acac)(CO)₂] under moderate hydroformylation conditions catalysed the formation of 1-heptanal and branched aldehydes from 1-hexene in a ratio of 1.5:1.     

Additions of Azomethine Ylides to Fullerene C(60) Assisted by a Removable Anchor

The addition of nitrile oxides to [60]fullerene, leading to isoxazolinofullerenes, can be reversed using reducing agents such as Mo(CO)(6) or DIBALH. Thus, this reaction can be used, in principle, for protection/deprotection of [60]fullerene or for solubilization purposes. The tether-controlled tandem addition of nitrile oxides and azomethine ylides provides mainly cis-1 patterns. The determination of the structure of bisadducts was obtained by NMR spectroscopy with the help of HMQC, HMBC, and NOEDS techniques. The isoxazoline moiety could be removed using Mo(CO)(6) leaving a fulleropyrrolidine derivative.     

Theoretical studies on vibrational spectra of some mixed carbonyl-halide complexes of Osmium(II)

The vibrational spectra of Os(CO)(6)(2+) and some of its mixed carbonyl-halide complexes, cis-Os(CO)(2)X(4)(2-), fac-Os(CO)(3)X(3)(-) and Os(CO)(5)X(+) (X=F, Cl, Br and I), have been systematically investigated by ab initio RHF and density functional B3LYP methods with LanL2DZ and SDD basis sets. The calculated vibrational frequencies of complexes Os(CO)(6)(2+), cis-Os(CO)(2)X(4)(2-) and fac-Os(CO)(3)X(3)(-) are evaluated via comparison with the experimental values. In infrared frequency region, the C-O stretching vibrational frequencies calculated at B3LYP level with two basis sets are in good agreement with the observed values with deviations less than 5%. In the far-infrared region, the B3LYP/SDD method achieved the best results with deviations less than 9% for Os-X stretching and less than 8% for Os-C stretching vibrational frequencies. The vibrational frequencies for Os(CO)(5)X(+) that have not been experimentally reported were predicted.     

Molybdenum-molybdenum multiple bonding in homoleptic molybdenum carbonyls: comparison with their chromium analogues

The binuclear molybdenum carbonyls Mo(2)(CO)(n) (n = 11, 10, 9, 8) have been studied by density functional theory using the BP86 and MPW1PW91 functionals. The lowest energy Mo(2)(CO)(11) structure is a singly bridged singlet structure with a Mo-Mo single bond. This structure is essentially thermoneutral toward dissociation into Mo(CO)(6) + Mo(CO)(5), suggesting limited viability similar to the analogous Cr(2)(CO)(11). The lowest energy Mo(2)(CO)(10) structure is a doubly semibridged singlet structure with a Mo═Mo double bond. This structure is essentially thermoneutral toward disproportionation into Mo(2)(CO)(11) + Mo(2)(CO)(9), suggesting limited viability. The lowest energy Mo(2)(CO)(9) structure has three semibridging CO groups and a Mo≡Mo triple bond analogous to the lowest energy Cr(2)(CO)(9) structure. This structure appears to be viable toward CO dissociation, disproportionation into Mo(2)(CO)(10) + Mo(2)(CO)(8), and fragmentation into Mo(CO)(5) + Mo(CO)(4) and thus appears to be a possible synthetic objective. The lowest energy Mo(2)(CO)(8) structure has one semibridging CO group and a Mo≡Mo triple bond similar to that in the lowest energy Mo(2)(CO)(9) structure. This differs from the lowest energy Cr(2)(CO)(8) structure, which is a triply bridged structure. A higher energy unbridged D(2d) Mo(2)(CO)(8) structure was found with a very short Mo-Mo distance of 2.6 ?. This interesting structure has two degenerate imaginary vibrational frequencies. Following the corresponding normal modes leads to a Mo(2)(CO)(8) structure, lying ~5 kcal/mol above the global minimum, with two four-electron donor bridging CO groups and a Mo═Mo distance suggesting a formal double bond. All of the triplet Mo(2)(CO)(n) (n = 10, 9, 8) structures were found to be relatively high energy structures, lying at least 22 kcal/mol above the corresponding global minimum. The singlet-triplet splittings for the Mo(2)(CO)(n) (n = 10, 9, 8) structures are significantly higher than those of the Cr(2)(CO)(n) analogues. The Mo-Mo Wiberg bond indices confirm our assigned bond orders based on predicted bond distances.     

Boronyl ligand as a member of the isoelectronic series BO(-) → CO → NO(+): viable cobalt carbonyl boronyl derivatives?

Recently the first boronyl (oxoboryl) complex [(c-C(6)H(11))(3)P](2)Pt(BO)Br was synthesized. The boronyl ligand in this complex is a member of the isoelectronic series BO(-) → CO → NO(+). The cobalt carbonyl boronyls Co(BO)(CO)(4) and Co(2)(BO)(2)(CO)(7), with cobalt in the formal d(8) +1 oxidation state, are thus isoelectronic with the familiar homoleptic iron carbonyls Fe(CO)(5) and Fe(2)(CO)(9). Density functional theory predicts Co(BO)(CO)(4) to have a trigonal bipyramidal structure with the BO group in an axial position. The tricarbonyl Co(BO)(CO)(3) is predicted to have a distorted square planar structure, similar to those of other 16-electron complexes of d(8) transition metals. Higher energy Co(BO)(CO)(n) (n = 3, 2) structures may be derived by removal of one (for n = 3) or two (for n = 2) CO groups from a trigonal bipyramidal Co(BO)(CO)(4) structure. Structures with a CO group bridging 17-electron Co(CO)(4) and Co(BO)(2)(CO)(3) units and no Co-Co bond are found for Co(2)(BO)(2)(CO)(8). However, Co(2)(BO)(2)(CO)(8) is not viable because of the predicted exothermic loss of CO to give Co(2)(BO)(2)(CO)(7). The lowest lying Co(2)(BO)(2)(CO)(7) structure is a triply bridged (2BO + CO) structure closely related to the experimental Fe(2)(CO)(9) structure. However, other relatively low energy Co(2)(BO)(2)(CO)(7) structures are found, either with a single CO bridge, similar to the experimental Os(2)(CO)(8)(μ-CO) structure; or with 17-electron Co(CO)(4) and Co(BO)(2)(CO)(3) units joined by a single Co-Co bond with or without semibridging carbonyl groups. Both triplet and singlet Co(2)(BO)(2)(CO)(6) structures are found. The lowest lying triplet Co(2)(BO)(2)(CO)(6) structures have a Co(CO)(3)(BO)(2) unit coordinated to a Co(CO)(3) unit through the oxygen atoms of the boronyl groups with a non-bonding ～4.3 ? Co···Co distance. The lowest lying singlet Co(2)(BO)(2)(CO)(6) structures have either two three-electron donor bridging η(2)-μ-BO groups and no Co···Co bond or one such three-electron donor BO group and a formal Co-Co single bond.     

Comproportionation of cationic and anionic tungsten complexes having an N-heterocyclic carbene ligand to give the isolable 17-electron tungsten radical CpW(CO)2(IMes)(•)

A series consisting of a tungsten anion, radical, and cation, supported by the N-heterocyclic carbene 1,3-bis(2,4,6-trimethylphenyl)imidazol-2-ylidene (IMes) and spanning formal oxidation states W(0), W(I), and W(II), has been synthesized, isolated, and characterized. Reaction of the hydride CpW(CO)(2)(IMes)H with KH and 18-crown-6 gives the tungsten anion [CpW(CO)(2)(IMes)](-)[K(18-crown-6)](+). Electrochemical oxidation of [CpW(CO)(2)(IMes)](-) in MeCN (0.2 M (n)Bu(4)N(+)PF(6)(-)) is fully reversible (E(1/2) = -1.65 V vs Cp(2)Fe(+?/0)) at all scan rates, indicating that CpW(CO)(2)(IMes)(?) is a persistent radical. Hydride transfer from CpW(CO)(2)(IMes)H to Ph(3)C(+)PF(6)(-) in MeCN affords [cis-CpW(CO)(2)(IMes)(MeCN)](+)PF(6)(-). Comproportionation of [CpW(CO)(2)(IMes)](-) with [CpW(CO)(2)(IMes)(MeCN)](+) gives the 17-electron tungsten radical CpW(CO)(2)(IMes)(?). This complex shows paramagnetically shifted resonances in the (1)H NMR spectrum and has been characterized by IR spectroscopy, low-temperature EPR spectroscopy, and X-ray diffraction. CpW(CO)(2)(IMes)(?) is stable with respect to disproportionation and dimerization. NMR studies of degenerate electron transfer between CpW(CO)(2)(IMes)(?) and [CpW(CO)(2)(IMes)](-) are reported. DFT calculations were carried out on CpW(CO)(2)(IMes)H, as well as on related complexes bearing NHC ligands with N,N' substituents Me (CpW(CO)(2)(IMe)H) or H (CpW(CO)(2)(IH)H) to compare to the experimentally studied IMes complexes with mesityl substituents. These calculations reveal that W-H homolytic bond dissociation energies (BDEs) decrease with increasing steric bulk of the NHC ligand, from 67 to 64 to 63 kcal mol(-1) for CpW(CO)(2)(IH)H, CpW(CO)(2)(IMe)H, and CpW(CO)(2)(IMes)H, respectively. The calculated spin density at W for CpW(CO)(2)(IMes)(?) is 0.63. The W radicals CpW(CO)(2)(IMe)(?) and CpW(CO)(2)(IH)(?) are calculated to form weak W-W bonds. The weakly bonded complexes [CpW(CO)(2)(IMe)](2) and [CpW(CO)(2)(IH)](2) are predicted to have W-W BDEs of 6 and 18 kcal mol(-1), respectively, and to dissociate readily to the W-centered radicals CpW(CO)(2)(IMe)(?) and CpW(CO)(2)(IH)(?).     

Versatile behavior of the fluorophosphinidene ligand in iron carbonyl chemistry

Fluorophosphinidene (PF) is a versatile ligand found experimentally in the transient species M(CO)(5)(PF) (M = Cr, Mo) as well as the stable cluster Ru(5)(CO)(15)(μ(4)-PF). The PF ligand can function as either a bent two-electron donor or a linear four-electron donor with the former being more common. The mononuclear tetracarbonyl Fe(PF)(CO)(4) is predicted to have a trigonal bipyramidal structure analogous to Fe(CO)(5) but with a bent PF ligand replacing one of the equatorial CO groups. The tricarbonyl Fe(PF)(CO)(3) is predicted to have two low-energy singlet structures, namely, one with a bent PF ligand and a 16-electron iron configuration and the other with a linear PF ligand and the favored 18-electron iron configuration. Low-energy structures of the dicarbonyl Fe(PF)(CO)(2) have bent PF ligands and triplet spin multiplicities. The lowest energy structures of the binuclear Fe(2)(PF)(CO)(8) and Fe(2)(PF)(2)(CO)(7) derivatives are triply bridged structures analogous to the experimental structure of the analogous Fe(2)(CO)(9). The three bridges in each Fe(2)(PF)(CO)(8) and Fe(2)(PF)(2)(CO)(7) structure include all of the PF ligands. Other types of low-energy Fe(2)(PF)(2)(CO)(7) structures include the phosphorus-bridging carbonyl structure (FP)(2)COFe(2)(CO)(6), lying only ~2 kcal/mol above the global minimum, as well as an Fe(2)(CO)(7)(μ-P(2)F(2)) structure in which the two PF groups have coupled to form a difluorodiphosphene ligand unsymmetrically bridging the central Fe(2) unit.     

Manganese carbonyl fluorides: are they viable molecules?

The mononuclear Mn(CO)(5)X and binuclear Mn(2)(CO)(8)(μ-X)(2) manganese carbonyl halides have long been known for the halogens Cl, Br, and I. However, the corresponding manganese carbonyl fluorides (X = F) remain unknown. The structures and thermochemistry of such manganese carbonyl fluorides and their decarbonylation products have now been investigated using density functional theory. In all cases singlet structures were found to have lower energies than the corresponding triplet structures. The expected octahedral structure is predicted for Mn(CO)(5)F. Decarbonylation of Mn(CO)(5)F is predicted to give trigonal bipyramidal Mn(CO)(4)F with equatorial fluorine. Further, decarbonylation gives tetrahedral Mn(CO)(3)F. All of the binuclear Mn(2)(CO)(n)F(2) structures (n = 8, 7, 6) are predicted to have a central Mn(2)F(2) unit with two bridging F atoms, a non-bonding Mn···Mn distance of ~3.1 ?, and exclusively terminal CO groups. The thermochemistry of these manganese carbonyl fluorides indicates that they are viable species. This suggests that the failure to date to synthesize the simple manganese carbonyl fluorides arises from a lack of a suitable synthetic method rather than from the instability of the desired products.     

Synthesis of the phosphino-fullerene PPh2(o-C6H4)(CH2NMeCH)C60 and its function as an η1-P or η3-P,C2 ligand

Following the method of Prato et al., reaction of C(60), N-methylglycine and o-(diphenylphosphino)benzaldehyde affords PPh(2)(o-C(6)H(4))(CH(2)NMeCH)C(60) (1) in moderate yield. Compound 1 reacts with W(CO)(4)(NCMe)(2) to produce W(CO)(4)(η(3)-PPh(2)(o-C(6)H(4))(CH(2)NMeCH)C(60)) (2), through coordination of the phosphine group and one 6 : 6-ring junction of fullerene. Reaction of 1 and Os(3)(CO)(11)(NCMe) affords Os(3)(CO)(11)(PPh(2)(o-C(6)H(4))(CH(2)NMeCH)C(60)) (3), which undergoes a cluster fragmentation reaction in refluxing toluene to produce Os(CO)(3)(η(3)-PPh(2)(o-C(6)H(4))(CH(2)NMeCH)C(60)) (4). Thermal reaction of 1 and Os(3)(CO)(12) affords 3 and 4. On the other hand, reaction of 1 and Ru(3)(CO)(12) yields only the mononuclear complex Ru(CO)(3)(η(3)-PPh(2)(o-C(6)H(4))(CH(2)NMeCH)C(60)) (5). The structures of 1-3 and 5 were determined by an X-ray diffraction study.     

2,2,6,6-tetramethylpiperidinogallium as a terminal and bridging ligand in homo- and heteroleptic chromium, nickel, and cobalt complexes

By reaction of the gallium(I) derivative Ga(4)tmp(4) (tmp = 2,2,6,6-tetramethylpiperidino) with Cr(CO)(5)(cyclo-octene), Co(2)(CO)(8), and Ni(cyclooctadiene)(2), respectively, the Gatmp complexes [Cr(CO)(5)Gatmp], (CO)(3)Cr(mu(2)-Gatmp)(3)Cr(CO)(3), (CO)(3)Co(mu(2)-Gatmp)(2)Co(CO)(3), and (tmpGa)(2)Ni(mu(2)-Gatmp)(3)Ni(Gatmp)(2) were obtained. The latter are described as derivatives of the binuclear metal carbonyls Cr(2)(CO)(9), Co(2)(CO)(8), and Ni(2)(CO)(7), where some or all carbonyls are replaced by the amino gallylene group. All compounds are characterized by spectroscopy and crystal structure analysis. The change of the bonding situation from localized two-center gallium metal bonds in the chromium derivative to three-center bonds in the cobalt complex is discussed by means of density functional theory calculations.     

Metal carbonyls as pharmaceuticals? [Ru(CO)3Cl(glycinate)], a CO-releasing molecule with an extensive aqueous solution chemistry

The pharmacologically active [Ru(CO)(3)Cl(glycinate)] is shown to be in equilibrium with [Ru(CO)(2)(CO(2)H)Cl(glycinate)](-) (isomers) at around pH 3.1 which then at physiological pH reacts with more base to give [Ru(CO)(2)(CO(2))Cl(glycinate)](2-) (isomers) or [Ru(CO)(2)(CO(2)H)(OH)(glycinate)](-) (isomers). The ease with which [Ru(CO)(3)Cl(glycinate)] reacts with hydroxide results in it producing a solution in water with a pH of around 2 to 2.5 depending on concentration and making its solutions more acidic than those of acetic acid at comparable concentrations. Acidification of [Ru(CO)(3)Cl(glycinate)] with HCl gives [Ru(CO)(3)Cl(2)(NH(2)CH(2)CO(2)H)]. The crystal structures of [Ru(CO)(3)Cl(glycinate)] and [Ru(CO)(3)Cl(2)(NH(2)CH(2)CO(2)Me)] are reported.     

Synthesis and crystal structures of (fulvalene)W(2)(SH)(2)(CO)(6), (fulvalene)W(2)(mu-S(2))(CO)(6), and (fulvalene)W(2)(mu-S)(CO)(6): low valent tungsten carbonyl sulfide and disulfide complexes stabilized by the bridging fulvalene ligand

Reaction of FvW(2)(H)(2)(CO)(6) with 2/8S(8) in THF results in rapid and quantitative formation of FvW(2)(SH)(2)(CO)(6). The crystal structure of this complex is reported and shows that the two tungsten-hydrosulfide groups are on opposite faces of the fulvalene ligand in an anti configuration. Nevertheless, treatment of FvW(2)(SH)(2)(CO)(6) (1) with PhN[double bond]NPh produces FvW(2)(mu-S(2))(CO)(6) (2) and Ph(H)NN(H)Ph. The crystal structure of the bridging disulfide, which cocrystallizes with 1 in a 2:1 ratio, is also described. Exposure of 2 equiv of *CrCp*(CO)(3) to 1 effects similar H atom transfers yielding 2 HCrCp*(CO)(3) and 2. Attempts to obtain crystals of the latter from solutions derived from this reaction mixture furnished a third product, FvW(2)(mu-S)(CO)(6) (3), which was analyzed crystallographically. The enthalpy of sulfur atom insertion into FvW(2)(H)(2)(CO)(6), yielding 1, has been measured by solution calorimetry.     

Disulfides of manganese carbonyl. Synthesis of Mn(2)(CO)(7)(mu-S2) and its reactions with tertiary phosphines and arsines

The reaction of Mn(2)(CO)(9)(NCMe) with thiirane yielded the sulfidomanganese carbonyl compounds Mn(2)(CO)(7)(mu-S(2)), 2, Mn(4)(CO)(15)(mu(3)-S(2))(mu(4)-S(2)), 3, and Mn(4)(CO)(14)(NCMe)(mu(3)-S(2))(mu(4)-S(2)), 4, by transfer of sulfur from the thiirane to the manganese complex. Compound 3 was obtained in better yield from the reaction of 2 with CO, and compound 4 is obtained from the reaction of 2 with NCMe. The reaction of 2 with PMe(2)Ph yielded the tetramanganese disulfide Mn(4)(CO)(15)(PMe(2)Ph)(2)(mu(3)-S)(2), 5, and S=PMe(2)Ph. The reaction of 5 with PMe(2)Ph yielded Mn(4)(CO)(14)(PMe(2)Ph)(3)(mu(3)-S)(2), 6, by ligand substitution. The reaction of 2 with AsMe(2)Ph yielded the new complexes Mn(4)(CO)(14)(AsMe(2)Ph)(2)(mu(3)-S(2))(2), 7, Mn(4)(CO)(14)(AsMe(2)Ph)(mu(3)-S(2))(mu(4)-S(2)), 8, Mn(6)(CO)(20)(AsMe(2)Ph)(2)(mu(4)-S(2))(3), 9, and Mn(2)(CO)(6)(AsMe(2)Ph)(mu-S(2)), 10. Reaction of 2 with AsPh(3) yielded the monosubstitution derivative Mn(2)(CO)(6)(AsPh(3))(mu-S(2)), 11. Reaction of 7 with PMe(2)Ph yielded Mn(4)(CO)(15)(AsMe(2)Ph)(2)(mu(3)-S)(2), 12. The phosphine analogue of 7, Mn(4)(CO)(14)(PMe(2)Ph)(2)(mu(3)-S(2))(2), 13, was prepared from the reaction of Mn(2)(CO)(9)(PMe(2)Ph) with Me(3)NO and thiirane. Compounds 2-9 and 11-13 were characterized by single-crystal X-ray diffraction. Compound 2 contains a disulfido ligand that bridges two Mn(CO)(3) groups that are joined by a Mn-Mn single bond, 2.6745(5) A in length. A carbonyl ligand bridges the Mn-Mn bond. Compounds 3 and 4 contain four manganese atoms with one triply bridging and one quadruply bridging disulfido ligand. Compounds 5 and 6 contain four manganese atoms with two triply bridging sulfido ligands. Compound 9 contains three quadruply bridging disulfido ligands imbedded in a cluster of six manganese atoms.     

Synthesis and structure of CpMo(CO)(dppe)H and its oxidation by Ph3C+

The reaction of CpMo(CO)(dppe)Cl (dppe = Ph2PCH2CH2PPh2) with Na+[AlH2(OCH2CH2OCH3)2]- gives the molybdenum hydride complex CpMo(CO)(dppe)H, the structure of which was determined by X-ray crystallography. Electrochemical oxidation of CpMo(CO)(dppe)H in CH3CN is quasi-reversible, with the peak potential at -0.15 V (vs Fc/Fc+). The reaction of CpMo(CO)(dppe)H with 1 equiv of Ph3C+BF4- in CD3CN gives [CpMo(CO)(dppe)(NCCD3)]+ as the organometallic product, along with dihydrogen and Gomberg's dimer (which is formed by dimerization of Ph3C.). The proposed mechanism involves one-electron oxidation of CpMo(CO)(dppe)H by Ph3C+ to give the radical-cation complex [CpMo(CO)(dppe)H].+. Proton transfer from [CpMo(CO)(dppe)H].+ to CpMo(CO)(dppe)H, loss of dihydrogen from [CpMo(CO)(dppe)(H)2]+, and oxidation of Cp(CO)(dppe)Mo. by Ph3C+ lead to the observed products. In the presence of an amine base, the stoichiometry changes, with 2 equiv of Ph3C+ being required for each 1 equiv of CpMo(CO)(dppe)H because of deprotonation of [CpMo(CO)(dppe)H].+ by the amine. Protonation of CpMo(CO)(dppe)H by HOTf provides the dihydride complex [CpMo(CO)(dppe)(H)2]+OTf-, which loses dihydrogen to generate CpMo(CO)(dppe)(OTf).     

An alternative synthesis method for [Os(NN)(CO)(2)X(2)] complexes (NN = 2,2'-bipyridine, 4,4'-dimethyl-2,2'-bipyridine; X = Cl, Br, I). Electrochemical and photochemical properties and behavior

A novel synthesis method is introduced for the preparation of [Os(NN)(CO)(2)X(2)] complexes (X = Cl, Br, I, and NN = 2,2'-bipyridine (bpy) or 4,4'-dimethyl-2,2'-bipyridine (dmbpy)). In the first step of this two-step synthesis, OsCl(3) is reduced in the presence of a sacrificial metal surface in an alcohol solution. The reduction reaction produces a mixture of trinuclear mixed metal complexes, which after the addition of bpy or dmbpy produce a trans(Cl)-[Os(NN)(CO)(2)Cl(2)] complex with a good 60-70% yield. The halide exchange of [Os(bpy)(CO)(2)Cl(2)] has been performed in a concentrated halidic acid (HI or HBr) solution in an autoclave, producing 30-50% of the corresponding complex. All of the synthesized trans(X)-[Os(bpy)(CO)(2)X(2)] (X = Cl, Br, I) complexes displayed a similar basic electrochemical behavior to that found in the ruthenium analog trans(Cl)-[Ru(bpy)(CO)(2)Cl(2)] studied previously, including the formation of an electroactive polymer [Os(bpy)(CO)(2)](n) during the two-electron electrochemical reduction. The absorption and emission properties of the osmium complexes were also studied. Compared to the ruthenium analogues, these osmium complexes display pronounced photoluminescence properties. The DFT calculations were made in order to determine the HOMO-LUMO gaps and to analyze the contribution of the individual osmium d-orbitals and halogen p-orbitals to the frontier orbitals of the molecules. The electrochemical and photochemical induced substitution reactions of carbonyl with the solvent molecule are also discussed.     

Comprehensive thermochemistry of W-H bonding in the metal hydrides CpW(CO)2(IMes)H, [CpW(CO)2(IMes)H](•+), and [CpW(CO)2(IMes)(H)2]+. Influence of an N-heterocyclic carbene ligand on metal hydride bond energies

The free energies interconnecting nine tungsten complexes have been determined from chemical equilibria and electrochemical data in MeCN solution (T = 22 °C). Homolytic W-H bond dissociation free energies are 59.3(3) kcal mol(-1) for CpW(CO)(2)(IMes)H and 59(1) kcal mol(-1) for the dihydride [CpW(CO)(2)(IMes)(H)(2)](+) (where IMes = 1,3-bis(2,4,6-trimethylphenyl)imidazol-2-ylidene), indicating that the bonds are the same within experimental uncertainty for the neutral hydride and the cationic dihydride. For the radical cation, [CpW(CO)(2)(IMes)H](?+), W-H bond homolysis to generate the 16-electron cation [CpW(CO)(2)(IMes)](+) is followed by MeCN uptake, with free energies for these steps being 51(1) and -16.9(5) kcal mol(-1), respectively. Based on these two steps, the free energy change for the net conversion of [CpW(CO)(2)(IMes)H](?+) to [CpW(CO)(2)(IMes)(MeCN)](+) in MeCN is 34(1) kcal mol(-1), indicating a much lower bond strength for the 17-electron radical cation of the metal hydride compared to the 18-electron hydride or dihydride. The pK(a) of CpW(CO)(2)(IMes)H in MeCN was determined to be 31.9(1), significantly higher than the 26.6 reported for the related phosphine complex, CpW(CO)(2)(PMe(3))H. This difference is attributed to the electron donor strength of IMes greatly exceeding that of PMe(3). The pK(a) values for [CpW(CO)(2)(IMes)H](?+) and [CpW(CO)(2)(IMes)(H)(2)](+) were determined to be 6.3(5) and 6.3(8), much closer to the pK(a) values reported for the PMe(3) analogues. The free energy of hydride abstraction from CpW(CO)(2)(IMes)H is 74(1) kcal mol(-1), and the resultant [CpW(CO)(2)(IMes)](+) cation is significantly stabilized by binding MeCN to form [CpW(CO)(2)(IMes)(MeCN)](+), giving an effective hydride donor ability of 57(1) kcal mol(-1) in MeCN. Electrochemical oxidation of [CpW(CO)(2)(IMes)](-) is fully reversible at all observed scan rates in cyclic voltammetry experiments (E° = -1.65 V vs Cp(2)Fe(+/0) in MeCN), whereas CpW(CO)(2)(IMes)H is reversibly oxidized (E° = -0.13(3) V) only at high scan rates (800 V s(-1)). For [CpW(CO)(2)(IMes)(MeCN)](+), high-pressure NMR experiments provide an estimate of ΔG° = 10.3(4) kcal mol(-1) for the displacement of MeCN by H(2) to give [CpW(CO)(2)(IMes)(H)(2)](+).     

Reactions of silicon atoms and small clusters with CO: experimental and theoretical characterization of SinCO (n=1-5), Si2(CO)2, c-Si2(mu-O)(mu-CSi), and c-Si2(mu-O)(mu-CCO) in solid argon

Reactions of silicon atoms and small clusters with carbon monoxide molecules in solid argon have been studied using matrix isolation infrared absorption spectroscopy. In addition to the previously reported SiCO monocarbonyl, Si(2)(CO)(2) and Si(n)CO (n=2-5) carbonyl molecules were formed spontaneously on annealing and were characterized on the basis of isotopic substitution and theoretical calculations. It was found that Si(2)CO, Si(3)CO, and Si(5)CO are bridge-bonded carbonyl compounds, whereas Si(4)CO is a terminal-bonded carbonyl molecule. The Si(2)(CO)(2) and Si(3)CO molecules photochemically rearranged to the more stable c-Si(2)(mu-O)(mu-CCO) and c-Si(2)(mu-O) (mu-CSi) isomers where Si(2) is inserted into the CO triple bond.     

Salts of the cobalt(I) complexes [Co(CO)5]+ and [Co(CO)2(NO)(2)]+ and the Lewis acid-base adduct [Co2(CO)7CO--B(CF3)3

The reaction of [Co(2)(CO)(8)] with (CF(3))(3)BCO in hexane leads to the Lewis acid-base adduct [Co(2)(CO)(7)CO--B(CF(3))(3)] in high yield. When the reaction is performed in anhydrous HF solution [Co(CO)(5)][(CF(3))(3)BF] is isolated. The product contains the first example of a homoleptic metal pentacarbonyl cation with 18 valence electrons and a trigonal-bipyramidal structure. Treatment of [Co(2)(CO)(8)] or [Co(CO)(3)NO] with NO(+) salts of weakly coordinating anions results in mixed crystals containing the [Co(CO)(5)](+)/[Co(CO)(2)(NO)(2)](+) ions or pure novel [Co(CO)(2)(NO)(2)](+) salts, respectively. This is a promising route to other new metal carbonyl nitrosyl cations or even homoleptic metal nitrosyl cations. All compounds were characterized by vibrational spectroscopy and by single-crystal X-ray diffraction.     

Involvement of a binuclear species with the Re-C(O)O-Re moiety in CO2 reduction catalyzed by tricarbonyl rhenium(I) complexes with diimine ligands: strikingly slow formation of the Re-Re and Re-C(O)O-Re species from Re(dmb)(CO)3S (dmb = 4,4'-dimethyl-2,2'-bipyridine, S = solvent)

Excited-state properties of fac-[Re(dmb)(CO)(3)(CH(3)CN)]PF(6), [Re(dmb)(CO)(3)](2) (where dmb = 4,4'-dimethyl-2,2'-bipyridine), and other tricarbonyl rhenium(I) complexes were investigated by transient FTIR and UV-vis spectroscopy in CH(3)CN or THF. The one-electron reduced monomer, Re(dmb)(CO)(3)S (S = CH(3)CN or THF), can be prepared either by reductive quenching of the excited states of fac-[Re(dmb)(CO)(3)(CH(3)CN)]PF(6) or by homolysis of [Re(dmb)(CO)(3)](2). In the reduced monomer's ground state, the odd electron resides on the dmb ligand rather than on the metal center. Re(dmb)(CO)(3)S dimerizes slowly in THF, k(d) = 40 +/- 5 M(-1) s(-1). This rate constant is much smaller than those of other organometallic radicals which are typically 10(9) M(-1) s(-1). The slower rate suggests that the equilibrium between the ligand-centered and metal-centered radicals is very unfavorable (K approximately 10(-4)). The reaction of Re(dmb)(CO)(3)S with CO(2) is slow and competes with the dimerization. Photolysis of [Re(dmb)(CO)(3)](2) in the presence of CO(2) produces CO with a 25-50% yield based on [Re]. A CO(2) bridged dimer, (CO)(3)(dmb)Re-CO(O)-Re(dmb)(CO)(3) is identified as an intermediate. Both [Re(dmb)(CO)(3)](2)(OCO(2)) and Re(dmb)(CO)(3)(OC(O)OH) are detected as oxidation products; however, the previously reported formato-rhenium species is not detected.