BEPC共振事例的碎裂特性

发现e⁺e^－→J/ψ→3g三胶子碎裂的末态强子多重数〈n〉满足与e⁺e^－→q₀q₀连续区事例相同的普适质量关系〈n〉=A2S+12I+1exp(–bm2).表明胶子、夸克碎裂成强子时有相同的规律性.同样可以把参数A解释为直生介子、重子多重数〈M〉+〈B〉.虽然对Υ→3g与连续区事例进行比较,末态重子多重数增高2.5倍,但是利用我们对J/ψ→3g共振区的计算研究,没有发现J/ψ→3g事例有类似的特征.     

η、η′和ι的夸克和胶子内容、双光子衰变和J/ψ辐射衰变产生

本文引进q_iq_i→q_jq_j以及q_iq_i→(gg)湮没项^[1],并考虑了对湮没项的SU(3)破坏效应^[2],讨论了η、η′和ι的混合,得到了它们的有声有色和胶子内容.与此同时,引入EPCAC(扩充的部分守恒赝矢流)假设^[3],考察了η、η′和ι的双光子衰变.本文还计算了衰变宽度比R₁=Γ(J/ψ→γη′)/Γ(J/ψ→γη)以及R₂=Γ(J/ψ→γη′)/Γ(J/ψ→γι),指出了实验结果对纯胶子球质量值的限制.     

Υ三胶子碎裂粒子产率的普适质量关系

发现Υ→3g三胶子碎裂的末态强子多重数满足与e⁺e^－→q₀q₀事例相同的普适质量关系,表明胶子、夸克碎裂成强子时有相同的规律性.不需引入任何其它假定,就自然解释了Υ→3g三胶子碎裂末态重子多重数增高的重要特征.     

LHC高能Pb—Pb和Ca—Ca碰撞中的直接硬光生J/ψ及γ

研究了LHC中,Pb–Pb以质心系能量5.5ATeV以及Ca–Ca以质心系能量7ATeV碰撞过程中的硬直接光生J/ψ和γ过程:A+A→A+J/ψ(γ)+X.结果表明该过程不仅可用于测量原子核中的胶子分布,还可以用以研究大R_t胶子以及重夸克的J/ψ碎裂机制.     

关于J/ψ辐射衰变产生胶球态的另一种机制

基于粲夸克偶素J/ψ质量大而寿命长的特征的物理内涵和对胶球态产生条件的理解,提出了J/ψ→Gb+γ过程产生胶球态的另一种机制,即认为胶球态Gb来自J/ψ中的组分粲夸克对c_con.(c_con.)分别转变为流粲夸克对c_{cur.(ccur.)时所发射的色八重态胶团对的融合,而余下的流粲夸克对再湮没为光子γ.通过用此模型的计算,讨论了ΓJ/ψ→Gb+γ与有关参数值的关系,并与J/ψ辐射衰变中通过两个末态胶子的强子化产生胶球的机制作出了对比.}     

J/ψ强子衰变过程的角分布螺旋度形式

本文给出了e⁺e^－→J/ψ→V+X,V→P₁P₂和e⁺e^－→J/ψ→V+X,X→P₄P₅过程的角分布螺旋度形式.为e⁺e^－实验数据分析提供了理论公式.     

J/ψ衰变中f0(975)的实验研究

本文基于北京正负电子对撞机(BEPC)上北京谱仪(BES)所收集到的国家自然科学基金资助.7.8×10⁶J/ψ事例,系统研究了J/ψ→φπ⁺π^－和J/ψ→ωπ⁺π^－两个衰变道,给出了过程的分支比以及f₀的位置和宽度参数,并对J/ψ→φf₀,f₀→π⁺π^－过程的角分布进行了拟合,首次确定出该过程的螺旋度振幅比.     

J/ψ强子衰变过程的矩分析

本文给出了过程e⁺+e^－→J/ψ→V+X,V→P₁P₂或P₁P₂P₃和X→pp的角分布螺旋度形式,并在此基础上进行了矩分析,得到了若干关系式,有助于确定玻色共振态X的自旋J_x以及过程J/ψ→V+X的螺旋度振幅之比.     

J/ψ三级二体强衰变过程的自旋-宇称分析

本文给出了级联衰变过程e⁺+e^－→J/ψ→V+X,X→P₁+Y,Y→P₂+P₃(V代表矢量介子,P_i代表赝标介子)的角分布螺旋度形式,为通过J/ψ三级二体强衰变过程对中间态X粒子进行自旋-宇称分析提供理论公式.     

用推广的矩分析方法确定过程J/ψ→V1,X→V2+V3中粒子X的自旋-宇称

本文用推广的矩分析方法对J/ψ的强衰变过程J/ψ→V₁,X→V₂+V₃,V₂、V₃→2P或3P(其中V_i代表有质量的矢量粒子,P代表赝标介子)进行了讨论.对于具有不同自旋和宇称的中间态X,给出了相应的矩的表达式.在非相对论情况下,计算了过程X→V₂+V₃的螺旋度振幅值.通过比较部分矩的理论值和实验值,可以确定中间态粒子X的自旋、宇称和所处的分波态.     

Hybrid Wavelength and Code Division Multiple Access in Optical Networks

A review of schemes for multiple access in fiber optic networks shows that a hybrid of wavelength and code division multiple access (WCDMA) combines the best features of both. In particular, the hybrid scheme retains the large information carrying capacity of wavelength division multiple access (WDMA) and flexibility of code division multiple access (CDMA). In this paper WDMA, optical CDMA (OCDMA), and WCDMA networks are discussed. In OCDMA networks, concept of incoherent and coherent coding including inverse decoding and matched filter is introduced. The delay performance of both WDMA and WCDMA networks, under the simple suboptimum access protocols based on cyclic search, is computed. It has been shown quantitatively that tuning delay significantly affects the delay performance of both WDMA and WCDMA networks. Futhermore, delay performance of WCDMA networks is always better than the WDMA networks for the same tuning delay, load, and number of users.     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Research on beamforming method for dual-line array with space mismatch between the two line arrays

The performance of port/starboard discrimination of dual-line array will be seriously degraded when the space between the two line arrays of the dual-line array is mismatched. The directivity function of the delay-sum and delay-subtract beamforming is deduced and the port/starboard discrimination of the delay-sum and delay-subtract beamforming is also studied both under the ideal status and the status under which the space between the two line arrays of the dual-line array is mismatched. Analysis results show the delay-subtract beamforming has better performance of port/starboard discrimination. At last, the sea trial results demonstrate the theoretical results.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Retrieval of ultraviolet skylight radiances and O3 slant column densities from balloon-borne limb spectrometer

With a novel light-weight and absolutely calibrated ultraviolet （UV） spectrometer, UV skylight radiances and O3 slant column densities are measured by balloon-borne limb measurements in Xinjiang area, China. UV skylight radiances measured at the height of 31 km are compared with the results from Modtran in the wavelength range from 290 to 420 nm. O3 slant column densities are derived from radiance spectra in the Huggins bands （320 - 335 nm） using differential optical absorption spectroscopy method. And the parameter exhibits a good correlation with the same value simulated by radiative transfer model （Tracy）. The O3 profile simultaneously measured by an O3 sonde is used as input in Tracy calculations. The O3 sonde is launched on the same balloon.     

Design optimization of highly sensitive LSPR enhanced surface plasmon resonance biosensors with nanoholes

For breaking through the sensitivity limitation of conventional surface plasmon resonance (SPR) biosensors, novel highly sensitive SPR biosensors with Au nanoparticles and nanogratings enhancement have been proposed recently.But in practice, these structures have obvious disadvantages.In this study, a nanohole based sensitivity enhancement SPR biosensor is proposed and the influence of different structural parameters on the performance is investigated by using rigorous coupled wave analysis (RCWA).Electromagnetic field distributions around the nanohole are also given out to directly explain the performance difference for various structural parameters.The results indicate that significant sensitivity increase is associated with localized surface plasmons (LSPs) excitation mediated by nanoholes.Except to outcome the weakness of other LSP based biosensors, larger resonance angle shift, reflectance amplitude, and sharper SPR curves' width are obtained simultaneously under optimized structural parameters.     

Polymer gratings based on photopolymerization for low-order distributed feedback polymer lasers

Novel polymer distributed feedback(DFB)gratings are fabricated based on photopolymerization to reduce lasing threshold of polymer lasers.A photopolymer formulation sensitive to 355-nm ultraviolet(UV)light is proposed for the fabrication of polymer gratings and it can be used to form polymer films by spin-coating process.A very low surface-relief depth ranging from 12.5 to about 1.0 nm has been demonstrated with a refractive-index modulation of about 0.012.The experimental results indicate that such polymer gratings have promising potentials for the fabrication of low-order DFB organic semiconductor lasers.     

A novel methodology for photometric compensation of projection display on patterned screen

We propose a novel methodology based on the projector-camera (ProCam) system to address the photometric compensation issue for the projection display on the patterned screen.The patterned screen is treated as the combination of a perfect white screen and a color modulator.The perfect white screen is used to automatically and accurately characterize the ProCam system offline using the polynomial model,and the parameters of the color modulator can be efficiently recovered by employing only two gray images based on the linear reflectance model.The experimental results show that the color artifacts of the display image can be greatly improved with this methodology,which demonstrates its feasibility and validity in the photometric compensation.