一种新型温度响应性聚氨基酸/聚类肽嵌段共聚物的合成与表征

以正己胺为引发剂, 通过γ-炔丙基-L-谷氨酸羧酸酐(PLG-NCA)和N-正辛基甘氨酸羧酸酐(Oct-NNCA)逐步开环聚合和后修饰策略合成了分子量分布较窄的温度响应性两嵌段共聚物寡聚乙二醇单元修饰的聚(γ-炔丙基-L-谷氨酸)-b-聚(N-正辛基甘氨酸)[(PPLG-g-EG₃)-b-PNOG]. 通过示差扫描量热法(DSC)研究了不同比例聚合物的结晶行为; 利用圆二色谱法(CD)研究了聚合物的二级结构, 并研究了聚合物在水溶液中的自组装行为, 采用透射电子显微镜(TEM)观察了组装后的形貌. 结果表明, 该温度响应性聚合物在室温下呈现α-螺旋结构, 随着温度升高, α-螺旋的构象减少. 该聚合物可以在水溶液中自发组装成棒状结构.     

谷氨酸赖氨酸无规共聚物和谷氨酸精氨酸无规共聚物的合成及性能

采用氨基酸-N-内羧酸酐(氨基酸-NCA)开环聚合的方法, 并通过改变开环聚合时谷氨酸-N-内羧酸酐(BLG-NCA)与赖氨酸-N-内羧酸酐[Lys(Z)-NCA]的投料比以及BLG-NCA与鸟氨酸-N-内羧酸酐[Orn(Z)-NCA]的投料比, 经过脱保护和胍基化反应得到一系列谷氨酸赖氨酸无规共聚物Poly(E,K)和谷氨酸精氨酸无规共聚物Poly(E,R). 核磁共振氢谱(¹H NMR)和核磁共振定量碳谱(¹³C NMR)分析结果表明, 合成了无规共聚物Poly(E,K)和Poly(E,R), 且二者中不同氨基酸的摩尔比接近开环聚合时相应NCA的投料比. 动态光散射(DLS)测定结果表明, 无规共聚物在pH=7.4的正常生理环境中形成的胶束粒径均一、 尺寸小于200 nm. Zeta电位表征结果表明, 无规共聚物Poly(E,K)和Poly(E,R)的Zeta电位值随着溶液pH值的变化而变化, 具有pH敏感性.     

分子印迹手性分离过程的热力学研究

以丙烯酰胺为功能单体, 以二甲基丙烯酸乙二醇酯为交联剂, 在模板分子N-叔丁氧羰酰-L-色氨酸(N-Boc-L-Trp)和N-叔丁氧羰酰-L-酪氨酸(N-Boc-L-Tyr)的存在下, 分别采用光引发聚合和热引发聚合制备了N-Boc-L-Trp和N-Boc-L-Tyr的分子印迹聚合物(MIPs), 进行分子印迹手性分离过程的热力学研究. 测定了分离过程的熵变、焓变和自由能变化. 结果显示, 在流动相中添加异丙醇或甲醇等强氢键竞争性溶剂时, 熵变对分离起到了主要作用, 而且分离过程中的溶剂化对分离的影响也非常大. 分子印迹聚合物对印迹分子和非印迹分子进行分子识别的主要作用是印迹聚合物与印迹分子匹配的三维空间结构.     

三嵌段共聚物PS-PHB-PS的原子转移自由基聚合

为了克服聚β-羟基丁酸酯(PHB)的弱点, 得到性能良好的新材料, 本文利用原子转移自由基聚合方法, 以Br-PHB-Br为大分子引发剂, 苯乙烯为单体, 在CuBr/N,N,N′,N″,N″-五甲基–二乙基三胺(PMDETA)催化体系作用下合成了一种新的三嵌段共聚物聚苯乙烯-聚β-羟基丁酸酯-聚苯乙烯(PS-PHB-PS). 共聚物的链结构利用¹H NMR和¹³C NMR进行了表征, 分子量特性和链段组成利用凝胶渗透色谱(SEC)方法进行了测定. 聚合物的分子量随单体转化率的增加而线性增加, 分子量分布指数相对较窄. 这些特征都满足原子转移自由基活性聚合的理想要求. 所得到的共聚物PS-PHB-PS具有较好的生物相容性, 与PHB相比具有良好的耐热性.     

聚丙烯酰胺/聚L-谷氨酸苄酯接枝共聚物的合成及其胶束制备

以聚丙烯酰胺(PAM)为大分子引发剂, 采用开环聚合方法, 在N,N-二甲基甲酰胺(DMF)中引发L-谷氨酸苄酯环内酸酐(BLG-NCA)聚合合成了两亲性聚丙烯酰胺/聚L-谷氨酸苄酯接枝共聚物(PAM-g-BLG), 采用IR, 1H NMR和GPC方法对共聚物结构进行了表征; 用芘作荧光探针, 研究了共聚物胶束的形成及其临界胶束浓度(cmc), 利用动态光散射(DLS)和透射电镜(TEM)研究了胶束的粒径分布和形态. 结果表明, PAM能够引发BLG-NCA开环聚合得到接枝共聚物, 在一定条件下接枝共聚物能够形成球形的稳定胶束, cmc值和胶束粒径随着共聚物中疏水性聚L-谷氨酸苄酯(PBLG)链段含量的增加而减小.     

接枝树形支化分子双亲性嵌段共聚肽的合成及性能研究

分别以叠氮丙胺和丙炔胺为引发剂,采用氨基酸环内酸酐开环聚合法(NCA-ROP),引发L-谷氨酸-γ-苄酯-N-羧基-环内酸酐和L-谷氨酸-γ-氯乙醇酯-N-羧基-环内酸酐聚合得到链端基为叠氮基的聚(L-谷氨酸-γ-苄酯)(PBLG)和链端基为炔基的聚(L-谷氨酸-γ-氯乙醇酯)(PCELG)均聚物.联合点击化学法(click chemistry)制备了一系列聚(L-谷氨酸-γ-苄酯)-b-聚(L-谷氨酸-γ-氯乙醇酯)(PBLG-b-PCELG),再通过对嵌段共聚物侧基氯进行化学修饰,将二代的甲基烷氧醚类亲水性树形枝化分子(G2)接枝到侧链上,形成一系列树形支化分子接枝聚肽双亲性嵌段共聚物,通过核磁(NMR)、红外光谱(IR)和凝胶渗透色谱(GPC)对其化学结构进行了表征,并采用紫外-可见光谱(UV-Vis)研究了聚合物结构及其溶液浓度对其温敏行为的影响规律.     

聚谷氨酸基双重响应性纳米胶束的制备及药物控释性能

首先制备端氨基聚(N-异丙基丙烯酰胺-co-聚乙二醇)大分子引发剂,再通过端氨基引发L-谷氨酸-γ-苄酯-N-羧酸酐开环聚合,制备了聚(N-异丙基丙烯酰胺-co-聚乙二醇)与聚(L-谷氨酸-γ-苄酯)的嵌段共聚物,将其中的γ-苄酯基团转化为酰肼基团后与阿霉素(DOX)共价结合,最后在水溶液中自组装成纳米胶束,制备了温度和pH值双重响应性纳米胶束。胶束外层由亲水性聚(N-异丙基丙烯酰胺-co-聚乙二醇)组成,具有温敏性,低临界溶液温度为38℃;胶束内层由聚(L-谷氨酸-γ-酰肼-阿霉素)组成。该胶束对于药物的释放具有温度和pH双重敏感性。     

N-烷基-N-(2-羟乙基)-N,N-二甲基溴化铵与十二烷基硫酸钠复配系统的双水相

合成了N-十二烷基-N-(2-羟乙基)-N,N-二甲基溴化铵、N-十四烷基-N-(2-羟乙基)-N,N-二甲基溴化铵和N-十六烷基-N-(2-羟乙基)-N,N-二甲基溴化铵等3个季铵盐阳离子表面活性剂. 研究了它们以及N-十六烷基-N,N,N-三甲基溴化铵(CTAB)与阴离子表面活性剂十二烷基硫酸钠(SDS)复配系统在313.15 K时的双水相行为. 复配系统在两个非常狭窄的区域能形成双水相, 两相区近似以等摩尔线为中心对称分布, 随着阳离子表面活性剂碳链长度的增长, 富含阳离子表面活性剂的双水相区向阴阳离子表面活性剂摩尔比减小的方向稍有移动.     

聚L-谷氨酸γ-苄酯的合成及其结晶结构的研究

利用L-谷氨酸苄酯与三光气反应制备了N-羧基-L-谷氨酸γ-苄酯-环内酸酐(NCA),以正已胺为引发剂,引发NCA开环聚合,合成了分子量为6700的聚L-谷氨酸γ-苄酯(PBLG).利用核磁共振仪(1 H-NMR)、凝胶渗透色谱(GPC)、傅里叶变换红外光谱(FTIR)以及一维大角X射线衍射仪(1D-WAXD)等表征手...     

两亲刚性三嵌段聚多肽的合成及其自组装行为

通过胱胺三甲基硅氮烷(N-TMS)引发N-羧基内酸苷(NCA)开环聚合,合成了2种两亲刚性三嵌段聚多肽聚(L-赖氨酸-ε-端甲基二缩乙二醇酰胺)-b-聚(L-谷氨酸-γ-苄酯)-b-聚(L-赖氨酸-ε-端甲基二缩乙二醇酰胺)(P[Lys-(EG)_2]-b-PBLG-b-P[Lys-(EG)_2])和聚(L-谷氨酸-γ-苄酯)-b-聚(L-赖氨酸-端甲基二缩乙二醇酰胺)-b-聚(L-谷氨酸-γ-苄酯)(PBLG-b-P[Lys-(EG)_2]-bPBLG),并用其在N,N-二甲基甲酰胺(DMF)-水的混合溶液中制备了三嵌段聚多肽的自组装体。采用核磁共振氢谱(1 H-NMR)和凝胶渗透色谱(GPC)表征了三嵌段聚多肽的结构,通过透射电子显微镜(TEM)研究了三嵌段聚多肽在混合溶液中的自组装行为。结果表明:通过N-TMS引发NCA开环聚合得到的三嵌段聚多肽的分子量与其理论值基本一致,且分子量分布窄;聚多肽在DMF-水的混合溶液中分别形成了球状胶束、大复合胶束、棒状大复合胶束等组装体;其自组装行为与特殊的全刚性嵌段结构有关。     

AB2‐type amphiphilic block copolymers composed of poly(ethylene glycol) and poly(N‐isopropylacrylamide) via single‐electron transfer living radical polymerization: Synthesis and characterization

Novel AB₂‐type amphiphilic block copolymers of poly(ethylene glycol) and poly(N‐isopropylacrylamide), PEG‐b‐(PNIPAM)₂, were successfully synthesized through single‐electron transfer living radical polymerization (SET‐LRP). A difunctional macroinitiator was prepared by esterification of 2,2‐dichloroacetyl chloride with poly(ethylene glycol) monomethyl ether (PEG). The copolymers were obtained via the SET‐LRP of N‐isopropylacrylamide (NIPAM) with CuCl/tris(2‐(dimethylamino)ethyl)amine (Me₆TREN) as catalytic system and DMF/H₂O (v/v = 3:1) mixture as solvent. The resulting copolymers were characterized by gel permeation chromatography and ¹H NMR. These block copolymers show controllable molecular weights and narrow molecular weight distributions (PDI < 1.15). Their phase transition temperatures and the corresponding enthalpy changes in aqueous solution were measured by differential scanning calorimetry. As a result, the phase transition temperature of PEG₄₄‐b‐(PNIPAM₅₅)₂ is similar to that in the case of PEG₄₄‐b‐PNIPAM₁₁₀; however, the corresponding enthalpy change is much lower, indicating the significant influence of the macromolecular architecture on the phase transition. This is the first study into the effect of macromolecular architecture on the phase transition using AB₂‐type amphiphilic block copolymer composed of PEG and PNIPAM. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4420–4427, 2009     

Quadruple thermo-photo-redox-responsive random copolypeptide nanogel and hydrogel

Quadruple stimuli-responsive random copolypeptide of poly(methoxydiethyleneglycol-L-glutamate)-co-poly(S-(o-nitrobenzyl)-L-cysteine) was synthesized by ring-opening copolymerization, simultaneously presenting thermo-photo-redox-responsive self-assembly behavior and forming nanogel and hydrogel in water.     

新型三硅氧烷表面活性剂的合成与界面性能

低聚乙二醇单甲醚和环氧氯丙烷在相转移催化剂(P.T.C)存在下合成出低聚乙二醇甲醚缩水甘油醚, 然后与氨丙基三硅氧烷进行开环反应, 合成出了新型的三硅氧烷表面活性剂Me₃SiOSiMeROSiMe₃ [R＝(CH₂)₃N(CH₂CH(OH)CH₂- (OCH₂CH₂)_xOCH₃)₂, x＝1, 2]. 通过¹H NMR确证了这些目标产物的结构, 并且通过测定其水溶液的平衡表面张力研究了其表面活性. 在浓度约为10^－4 mol•L^－1时可以将水的表面张力降低至约21～22 mN•m^－1.     

Studies on calcium‐containing poly(urethane ether)s

The calcium salt of mono(hydroxyethoxyethyl)phthalate [Ca(HEEP)₂] was synthesized by the reaction of diethylene glycol, phthalic anhydride, and calcium acetate. Calcium‐containing poly(urethane ether)s (PUEs) were synthesized by the reaction of hexamethylene diisocyanate (HMDI) or tolylene 2,4‐diisocyanate (TDI) with a mixture of Ca(HEEP)₂ and poly(ethylene glycol) (PEG₃₀₀ or PEG₄₀₀) with di‐n‐butyltin dilaurate as a catalyst. A series of calcium‐containing PUEs of different compositions were synthesized with Ca(HEEP)₂/PEG₃₀₀ (or PEG₄₀₀)/diisocyanate (HMDI or TDI) molar ratios of 2:2:4, 3:1:4, and 1:3:4 so that the coating properties of the PUEs could be studied. Blank PUEs without calcium‐containing ionic diols were also prepared by the reaction of PEG₃₀₀ or PEG₄₀₀ with HMDI or TDI. The PUEs were well characterized by Fourier transform infrared, ¹H and ¹³C NMR, solid‐state cross‐polarity/magic‐angle‐spinning ¹³C NMR, viscosity, solubility, and X‐ray diffraction studies. The thermal properties of the polymers were also studied with thermogravimetric analysis and differential scanning calorimetry. The PUEs were applied as top coats on acrylic‐coated leather, and their physicomechanical properties were also studied. The coating properties of PUEs, such as the tensile strength, elongation at break, tear strength, water vapor permeability, flexing endurance, cold crack resistance, abrasion resistance, color fastness, and adhesive strength, were better than the standard values. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2865–2878, 2003     

十八烷基-L-苯丙氨酸齐聚物在有机溶剂中的自组装

由L-苯丙氨酸和二(三氯甲基)碳酸酯反应得到的L-苯丙氨酸-N-羧基-环内酸酐(L-Phe-NCA), 在十八胺的引发下开环聚合得到十八烷基-L-苯丙氨酸齐聚物(简称L-Phe-R18). ¹H NMR (300 MHz)和FT-IR表征了产物结构, 是平均聚合度为5的齐聚物. L-Phe-R18能在多种有机溶剂中发生聚集和自组装, 并进而在这些有机溶剂中形成热可逆的物理凝胶. 其中, 该齐聚物能在氯苯、二苯醚、甲苯等溶剂中形成透明凝胶. 也能在苯、硝基苯、醋酸丁酯等溶剂中形成非透明凝胶. L-Phe-R18在这些有机溶剂中的最低凝胶化浓度(MGC)在w＝0.3%～1%之间. X射线衍射(XRD)数据和场发射扫描电镜(FE-SEM)以及分子模拟表征了L-Phe-R18聚集体的微观形态和可能的聚集方式. 认为L-Phe-R18在有机溶剂中通过分子间氢键、π-π堆积等非共价键相互作用聚集、组装成厚度约为20 nm左右的带状纤维, 溶剂分子以毛细力存在于相互缠绕的纤维网络结构中, 使体系形成稳定的凝胶.     

High elasticity,strength, and biocompatible amphiphilic hydrogel via click chemistry and ferric ion coordination

An amphiphilic interpenetrating polymer network hydrogel was designed and synthesized using click chemistry and ferric ion coordination. The first polymer network was formed through the reaction of azide‐modified PEG (N₃‐PEG_n‐N₃) and alkynyl‐pendant linear PPG derivatives ((PPG_m(C≡CH))_n) through click chemistry and mixed with poly(ethylene glycol‐dopamine) macromolecules. The second polymer network was formed through ferric ion coordination with poly(ethylene glycol‐dopamine). Interpenetrating polymer networks give the hydrogel unique amphiphilic properties and higher mechanical strength and thermal stability. Swelling ratio and degradation rate could be adjusted by controlling the ratio of poly(ethylene glycol‐dopamine) in the hydrogel network. Given that in vivo subcutaneous implantation revealed no infection and no obvious abnormalities, the hydrogel exhibits high biocompatibility. The feature indicates that these hydrogels have a promising application in the field of biomaterials and tissue engineering. Copyright © 2016 John Wiley & Sons, Ltd.     

Synthesis and study of water-soluble chitosan-O-poly(ethylene glycol) graft copolymers

Novel chitosan-O-poly(ethylene glycol) graft copolymers were synthesized. Etherification of N-phthaloyl chitosan by poly(ethylene glycol) monomethyl ether (MPEG) iodide was carried out in dimethylformamide in the presence of silver oxide. Varying the ratio of MPEG iodide to chitosan, different degree of O-substitution of MPEG to monosaccharide residue of chitosan (5-197%) was obtained. Chemical structure of the new chitosan derivatives was confirmed using FTIR spectroscopy and analysis of functional groups. O-PEGylated chitosans are soluble in water and aqueous solutions of wide pH range. Reduced viscosity of aqueous solutions of the graft copolymers is extremely low and similar to that of MPEG-2000.     

Ambient‐temperature copper‐catalyzed atom transfer radical polymerization of methacrylates in ethylene glycol solvents

The use of ethylene glycol solvents in the room‐temperature atom transfer radical polymerization (ATRP) of various hydrophobic and hydrophilic methacrylates is demonstrated. Unlike many of the very polar solvents described in the literature for room‐temperature ATRP, these solvents have good solvency for a wide range of polymers and monomers and are cheap and relatively nontoxic. Ethylene glycols with one hydroxyl and one methoxy group, such as tri(ethylene glycol) monomethyl ether (TEGMME), provide optimal results. The polymerization of methyl methacrylate in TEGMME with CuBr/N,N,N′N′,N″‐pentamethyldiethylenetriamine as the catalyst requires the addition of CuCl₂ at the beginning of the reaction to produce well‐controlled polymerizations. This leads to polymers with predictable molecular weights and relatively narrow polydispersities. Polymerization in solvents that are fully methoxy‐capped terminate prematurely because of catalyst precipitation. The electrochemical behavior of copper complexes in selected solvents is examined to determine why these solvents provide good rates at room temperature. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1588–1598, 2005     

Thermal and morphological investigation of the effect of POSS-(PEG2000)8 addition to UV curable PEGMEA/PEGDA formulation and simultaneously in situ formed silver nanoparticles

In this study, hybrid nanocomposites were synthesized by photo-crosslinking of poly (ethylene glycol) methyl ether acrylate/poly (ethylene glycol) diacrylate monomer system using 2- (carboxymethoxy) thioxanthone and POSS-(PEG₂₀₀₀)₈. Additionally, AgNO₃ was added to this formulation and in situ formation of silver nanoparticles onto hybrid nanocomposites were achieved in one-step. UV–Vis spectroscopy technique was used as a very useful tool for surface plasmon resonance band detection of silver nanoparticles. In addition to thermogravimetric analyses which were performed in nitrogen atmosphere to determine the thermal stability of the nanocomposites, dynamic light scattering, and scanning electron microscopy techniques were also used for size and morphology of silver nanoparticles in a hybrid network. TGA analyses proved that even the addition of a very low amount of POSS-(PEG₂₀₀₀)₈ made noteworthy contribution to thermal stability especially in the presence of silver nanoparticles in the hybrid network. The swelling capacities of the prepared films were examined at 1, 3 and 24 h in phosphate buffer solution (pH = 7.4). It was found that film containing only POSS-(PEG₂₀₀₀)₈ had the highest swelling ratio in the shortest time.     

Synthesis of poly(ethylene glycol methyl ether)-b-poly(ethylenimine) and its derivatives containing thymine and amino acids as pendants

Poly(ethylene glycol methyl ether)tosylate was prepared and used to initiate the polymerization of 2-methyl-2-oxazoline. The resulting poly(ethylene glycol methyl ether)-b-poly(N-acetyl ethylenimine) was hydrolyzed and neutralized to give poly(ethylene glycol methyl ether)-b-poly(ethyl-enimine) (PEO–PEI). 2-(thymin-1-yl)propionic acid, N-Cbz-alanine, N-Cbz-proline, N-Cbz-O-t-Bu-serine. and N-FMOC-proline were grafted onto the PEO–PEI copolymer; attempts were then made to remove the Cbz and FMOC protecting groups.