Magnetic particle‐loaded polymer brushes induced by external magnetic field: A Monte Carlo simulation

The effects of applied magnetic field on the system composed of polymer brushes and magnetic particles are studied by means of Monte Carlo simulation. The direction of the applied magnetic field is chosen to be perpendicular to the substrate plane. Polymer brushes and magnetic particles are attracted to each other. The average heights of polymer brushes depend not only on the strength of applied magnetic field (H) but also on the brush grafting density (σ) and the chain length (N). The applied magnetic field influences the arrangement of magnetic particles, and in turn, the arrangement of magnetic particles affects the spatial distribution of polymer brush monomers. When the strength of the magnetic field is increased, the average height of polymer brushes will be increased accordingly. The reason is that the orientations of the magnetic moments of particles must be along the magnetic field direction, and this leads polymer brushes to rearrange along the magnetic field direction. At the same time, the chain length and the grafting density of polymer brushes have also effects on the properties of the magnetic particles, such as the magnetic particles distribution, magnetic susceptibility, and pair correlation functions. Comparisons with the experimental ones are also made, and this investigation can provide some insights into statistical properties of magnetic particle‐loaded brushes induced by external magnetic field. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1873–1881, 2010     

Preparation and application of streptavidin magnetic particles

Two kinds of streptavidin magnetic particles,namely streptavidin GoldMag particles and streptavidin amino terminal particles were prepared by the methods of physical adsorption and covalent interaction respectively.The streptavidin coated on magnetic particle surface,crucial to many applications,was greatly influenced by the choice of the different buffer.Compared with DynalbeadsM-270 streptavidin, the binding capacity for biotin of different streptavidin magnetic particles was determined by enzyme inhibition method,and the coupling capacity and activity of biotinylated oligonucleotide on their sur- face were also analyzed.The results indicated that the streptavidin GoldMag particle prepared by physical adsorption was stable in STE(NaCl-Tris-EDTA)buffer that was frequently used in nucleic acid hybridization and detection.The streptavidin amino terminal particles prepared by covalent interaction could be used both in STE buffer and PBS(phosphate buffered saline)buffer.The biotin binding ca- pacity for 1 mg of streptavidin GoldMag particles and streptavidin amino terminal particles was 4950 and 5115 pmol respectively.The capacity of biotinylated oligonucleotide(24 bp)coupled on 1 mg of GoldMag and amino terminal magnetic particles was 2839 and 2978 pmol separately.These data were about 6-7 times higher than those of DynabeadsM-270 streptavidin.The hybridization results with FITC-labeled complementary probe on magnetic particle surface demonstrated that the oligonucleotide coupled on streptavidin magnetic particles had high biological activity.     

Coupling Proteins to Amine-terminated Magnetic Particles Activated with 1,4-Phenylene Diisothiocyanate

The homobifunctional crosslinker 1,4‐phenylene diisothiocyanate (PDC) was coupled to amine‐terminated magnetic particles, and human IgG, streptavidin, protein G and protein A were immobilized on the activated magnetic particles. The coupling of PDC to the amine‐terminated magnetic particles was completed in 10 min, and 1 mg of activated magnetic particles was able to immobilize 95 (g of protein G, 120 µg of protein A, 160 µg of streptavidin and 280 µg of IgG. Ultraviolet‐visible spectroscopy, FTIR spectroscopy and electron micrography were used to characterize the functional particles. The results indicated that PDC was successfully coupled to the surface of the amine‐terminated magnetic particles, and the proteins were effectively immobilized on their surface. The activity of protein G immobilized on the activated magnetic particles was confirmed by its ability to purify IgG from plasma.     

Preparation and Performance of Dual-functional Magnetic Phase-change Microcapsules

The fabrication of desired anti-magnetic materials for irradiation shielding remains a challenge to date. In this work, a new type of dual-functional magnetic shielding phase change microcapsules with paraffin as the core, melamine-formaldehyde (MF) resin as the shell and doped with magnetic particles in the shell were successfully prepared by in situ polymerization. The magnetic particles were dispersed in the shell layer by coating a hydrophilic emulsifier on the surface. These microcapsules were specifically applied to the field of magnetic shielding by the screen printing method. The effect of magnetic particles on the performance of phase-change microcapsules was examined by differential scanning calorimetry and thermogravimetric analyses. The magnetic type and magnetic strength of the microcapsules were studied by the vibrating sample magnetometer. Moreover, the effects of different magnetic particles (Fe₃O₄, CrO₂) on the performance of phase change microcapsules and the magnetic strength of microcapsules were compared. The results showed that these two kinds of magnetic particles can greatly improve the phase change latent heat, thermal stability, and thermal conductivity of the microcapsules. Finally, the great magnetic shielding role of these microcapsules was demonstrated in both static and pulsed magnetic fields through the screen printing of magnetic shielding ink on wallpaper. Incorporating 0.5 g Fe₃O₄ inside of microcapsules, specifically, the magnetic intensity was effectively reduced by ∼250 Oe within a short distance in the static field. We expect that these magnetic microcapsules hold great potential for the shielding of irradiations via the screen printing on various substrates.     

Preparation and characterization of submicron hybrid magnetic latex particles

Micrometer magnetic hybrid particles are of great interest in biomedical field, and various morphologies have been prepared via encapsulation processes. Regarding submicron, only few processes have been investigated and the most recent one leading to highly magnetic submicron magnetic hybrid particles is based on oil in water magnetic emulsion (MES) transformation. The encapsulation of magnetic iron oxide nanoparticles forming oil in water MES was investigated using different styrene/cross‐linker divinylbenzene volume ratio in the presence of potassium persulfate initiator. The encapsulation performed in this work is basically conducted by using well‐defined oil in water MES as a seed in radical emulsion polymerization. The chemical composition, morphology, iron oxide content, magnetic properties, electrokinetic properties, particle size, and size distribution of the prepared magnetic hybrid particles were examined using various techniques. The desired perfect magnetic core and polymer shell morphology were successfully obtained, and the final magnetic hybrid particles are superparamagnetic in nature and exhibit high iron oxide content (64 wt %). Copyright © 2015 John Wiley & Sons, Ltd.     

晶种和磁场诱导联合法制备一维Fe3O4粒子

本文采用晶种和磁场诱导结合的方法制备出了一维Fe3O4纳米粒子,研究了晶种粒径大小、磁场强度、晶种添加量以及晶种分步次数对Fe3O4产品形貌的影响。结果表明,磁场强度增加,棒形颗粒数目增加;晶种分步次数增加,棒形粒子轴比增加;采用三次晶种可以得到轴比为9.0的棒形颗粒;少量的晶种有利于得到轴比一致、形貌均匀的棒形颗粒;大尺寸的晶种有利于得到链形颗粒。同时从颗粒间的相互作用能分析了磁场强度和晶种大小对形貌的影响。     

Synthesis of magnetic DDAB vesicles

The synthesis of magnetic vesicles is described. The vesicles are constituted by didodecyldimethylammonium bromide and have a diameter of about 1 m. An aqueous magnetic fluid, constituted by charged magnetic nanoparticles dispersed in water without surfactant, is encapsulated in the vesicle with a volume fraction in particles that may range up to 10%. The first step of the encapsulation is the synthesis of a multiple emulsion the intermediate oily phase being evaporated to obtain the DDAB bilayer. The magnetic vesicles thus synthesized align and change shape when a magnetic field is applied.     

Facile and versatile strategy to prepare magnetic molecularly imprinted particles based on the coassembly of magnetic nanoparticles and amphiphilic random copolymers

Magnetic molecularly imprinted polymer nanoparticles for bisphenol A were prepared by coassembling magnetic nanoparticles and amphiphilic random copolymers. Under optimized conditions, bisphenol A as template molecules, magnetic molecularly imprinted polymer particles with regular morphology, small size, good monodispersity, and high content of OA‐Fe₃O₄ were prepared by the coassembly method using P(MMA‐co‐MAA) with monomer ratio of 9:1. These magnetic molecularly imprinted polymer particles could be rapidly collected by an external magnet within 1 min. The saturated adsorption capacity of the magnetic molecularly imprinted polymer for bisphenol A was 201.5 mg/g, and the imprinting factor was 2.5. The separation factors for bisphenol A to β‐estradiol, estriol, and diethylstilbestrol was 3.1, 2.9, and 3.7, respectively. Unlike assembling amphiphilic copolymer in the selective solvent, the coassembly process was simple and rapid. Therefore, the present work provided a facile and versatile approach to construct magnetic molecularly imprinted polymer nanoparticles under mild conditions.     

TGA and magnetization measurements for determination of composition and polymer conversion of magnetic hybrid particles

Magnetic hybrid colloidal particles can be characterized using various techniques and numerous tools leading generally to particles size, size distribution, and electrokinetic properties. However, the chemical composition of these hybrid particles can be estimated using thermal gravimetric analysis (TGA). More interestingly, the combination of this quantitative technique with the magnetization measurement leads not only to chemical composition but also to the overall polymerization conversion and more precisely to the polymerization conversion on the seed particles. In fact, the TGA performed on dried magnetic particles leads to exact organic/inorganic chemical composition. Regarding the magnetization, the amount of magnetic material can be deduced, and consequently, the amount of non‐magnetic material can be also estimated. Thus, TGA and magnetization measurements are considered as complementary techniques for characterization of magnetic hybrid colloidal particles. Copyright © 2015 John Wiley & Sons, Ltd.     

磁性壳聚糖复合微球的制备及其Cu2+吸附性能

以球磨后的粉煤灰磁珠（MS）颗粒为磁核,通过溶胶凝胶法和反相微乳液法依次包覆SiO₂和壳聚糖（CS）,制备了MS@SiO₂@CS磁性微球。利用扫描电镜及能量色散谱仪、热重分析仪、红外光谱仪、X射线衍射仪、振动样品磁强计对所得样品的结构和磁性进行了系统表征。结果表明,磁珠颗粒表面实现了逐层包覆,较均匀的分散于壳聚糖基体中,MS@SiO₂@CS微球的比饱和磁化强度可达7.04 emu·g^-1。Cu²⁺离子吸附实验表明,所得磁性壳聚糖微球对Cu²⁺具有良好的吸附能力,最大吸附量可达11.08 mg·g^-1;而且可通过磁选法高效固液分离。吸附动力学研究表明,MS@SiO₂@CS微球对Cu²⁺离子的吸附符合准二级动力学模型,以化学吸附为主。     

Poly(p‐phenylenediamine)‐coated magnetic particles: Preparation and electrochemical properties

Magnetic particles are of great interest in various biomedical applications, such as, sample preparation, in vitro biomedical diagnosis, and therapy. For biosensing applications, the used functional magnetic particles should answer numerous criteria such as; submicron size in order to avoid rapid sedimentation, high magnetic content for fast separations under applied magnetic field, and finally, good colloidal stability. Therefore, the aim of this work was to prepare submicron magnetic core and conducting polymer shell particles. The polymer shell was induced using p‐phenylenediamine as key monomer. The obtained core–shell particles were characterized in terms of particle size, size distribution, magnetization properties, Fourier transform infrared (FTIR) analysis, surface morphology, chemical composition, cyclic voltammetry, and impedance spectroscopy. The best experimental condition was found using 40 mg of povidone (PVP—stabilizing agent) and 0.16 mmol of p‐phenylenediamine. Using such initial composition, the core‐shell magnetic nanoparticles shown a narrowed size distribution around 290 nm and high magnetic content (above 50%). The obtained amino containing submicron highly magnetic particles were found to be a conducting material and superparamagnetic in nature. These promising conducting magnetic particles can be used for both transport and lab‐on‐a‐chip detection.     

Preparation of magnetic polystyrene latex via the miniemulsion polymerization technique

Magnetic iron oxide (magnetite, Fe₃O₄) nanoparticles were encapsulated with polystyrene to give a stable water‐based magnetic polymer latex, using the miniemulsion polymerization technique. The resulting magnetic latexes were characterized with transmission electron microscopy (TEM), dynamic light scattering (DLS), vibrating sample magnetometer measurements (VSM), and ⁵⁷Fe Mössbauer spectroscopy measurements. TEM revealed that all magnetite nanoparticles were embedded in the polymer spheres, leaving no empty polystyrene particles. The distribution of magnetite particles within the polystyrene spheres was inhomogeneous, showing an uneven polar appearance. The DLS measurements indicated a bimodal size distribution for the particles in the latexes. According to our magnetometry and Mössbauer spectroscopy data, the encapsulated magnetite particles conserve their superparamagnetic feature when they are separated in the polymer matrix. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4802–4808, 2004     

Extraction of Rutin and Rhoifolin by Inorganic Borate Functionalized Magnetic Particles

We demonstrate a facile approach for smart time‐saving extraction of active components of rutin and rhoifolin by a new kind of magnetic particles (MPs). The inorganic borate functionalized magnetic particles are quasi‐spherical with an average diameter of 200–220 nm. The MPs were characterized by scanning electron microscopy and X‐ray diffraction techniques. The inorganic boron content in MPs was confirmed by electron‐dispersive X‐ray spectroscopy. The extraction and release efficiency of MPs were investigated. The smart borate‐decorated magnetic particles show a specific extraction towards the active components containing cis‐1,2 diol moieties. Rutin and rhoifolin were extracted at 16.55 and 22.49 mg/g, respectively. The recycling test shows that MPs can be reused and maintain a significant efficiency for seven cycles. Hence, a novel structured and reusable magnetic nanomaterial for extracting rutin and rhoifolin was developed. This strategy of specific extraction will be an important method to obtain the active components with some structure features through designing various structured particles.     

磁性壳聚糖复合微球的制备及其Cu~(2+)吸附性能

以球磨后的粉煤灰磁珠(MS)颗粒为磁核,通过溶胶凝胶法和反相微乳液法依次包覆SiO_2和壳聚糖(CS),制备了MS@SiO_2@CS磁性微球。利用扫描电镜及能量色散谱仪、热重分析仪、红外光谱仪、X射线衍射仪、振动样品磁强计对所得样品的结构和磁性进行了系统表征。结果表明,磁珠颗粒表面实现了逐层包覆,较均匀的分散于壳聚糖基体中,MS@SiO_2@CS微球的比饱和磁化强度可达7.04 emu·g~(-1)。Cu~(2+)离子吸附实验表明,所得磁性壳聚糖微球对Cu~(2+)具有良好的吸附能力,最大吸附量可达11.08 mg·g~(-1);而且可通过磁选法高效固液分离。吸附动力学研究表明,MS@SiO_2@CS微球对Cu~(2+)离子的吸附符合准二级动力学模型,以化学吸附为主。     

Influence of the anisometry of magnetic particles on the isotropic–nematic phase transition

The influence of the shape anisotropy of magnetic particles on the isotropic–nematic phase transition was studied in ferronematics based on the nematic liquid crystal (LC) 4-(trans-4-n-hexylcyclohexyl)-isothiocyanato-benzene (6CHBT). The LC was doped with spherical or rod-like magnetic particles of different size and volume concentrations. The phase transition from isotropic to nematic phase was observed by polarising microscope as well as by capacitance measurements. The influence of the concentration and the shape anisotropy of the magnetic particles on the isotropic–nematic phase transition in LC are demonstrated here. The results are in a good agreement with recent theoretical predictions.     

Control of Drug Release through the In Situ Assembly of Stimuli‐Responsive Ordered Mesoporous Silica with Magnetic Particles

A site‐selective controlled delivery system for controlled drug release is fabricated through the in situ assembly of stimuli‐responsive ordered SBA‐15 and magnetic particles. This approach is based on the formation of ordered mesoporous silica with magnetic particles formed from Fe(CO)₅ via the surfactant‐template sol‐gel method and control of transport through polymerization of N‐isopropyl acrylamide inside the pores. Hydrophobic Fe(CO)₅ acts as a swelling agent as well as being the source of the magnetic particles. The obtained system demonstrates a high pore diameter (7.1 nm) and pore volume (0.41 cm³ g^?1), which improves drug storage for relatively large molecules. Controlled drug release through the porous network is demonstrated by measuring the uptake and release of ibuprofen (IBU). The delivery system displays a high IBU storage capacity of 71.5 wt %, which is almost twice as large as the highest value based on SBA‐15 ever reported. In vitro testing of IBU loading and release exhibits a pronounced transition at around 32 °C, indicating a typical thermosensitive controlled release.     

Magnetic Anisotropy of Cyanide‐Bridged Core and Core–Shell Coordination Nanoparticles Probed by X‐ray Magnetic Circular Dichroism

The local symmetry and local magnetic properties of 6 nm‐sized, bimetallic, cyanide‐bridged CsNiCr(CN)₆ coordination nanoparticles 1 and 8 nm‐sized, trimetallic, CsNiCr(CN)₆@CsCoCr(CN)₆ core–shell nanoparticles 2 were studied by X‐ray absorption spectroscopy (XAS) and X‐ray magnetic circular dichroism (XMCD). The measurements were performed at the Ni^II, Co^II, and Cr^III L_2,3 edges. This study revealed the presence of distorted Ni^II sites located on the particle surface of 1 that account for the uniaxial magnetic anisotropy observed by SQUID measurements. For the core–shell particles, a combination of the exchange anisotropy between the core and the shell and the pronounced anisotropy of the Co^II ions is the origin of the large increase in coercive field from 120 to 890 Oe on going from 1 to 2 . In addition, XMCD allows the relative orientation of the magnetic moments throughout the core–shell particles to be determined. While for the bimetallic particles of 1 , alignment of the magnetic moments of Cr^III ions with those of Ni^II ions leads to uniform magnetization, in the core–shell particles 2 the magnetic moments of the isotropic Cr^III follow those of Co^II ions in the shell and those of Ni^II ions in the core, and this leads to nonuniform magnetization in the whole nanoobject, mainly due to the large difference in local anisotropy between the Co^II ions belonging to the surface and the Ni^II ions in the core.     

管式磁微粒化学发光免疫分析法测定玉米样品中的黄曲霉毒素B1

开发了一种管式磁微粒化学发光免疫分析法测定玉米样品中黄曲霉毒素B1的方法,该方法使待测玉米样品中的黄曲霉毒素B1、辣根过氧化物酶标记的黄曲霉毒素B1与异硫氰酸荧光素(FITC)标记的黄曲霉毒素B1单克隆抗体在均相体系中发生竞争性免疫反应,再加入用抗FITC抗体包被的磁微粒作分离剂,抗原抗体复合物结合在磁微粒上,在磁场中经分离、洗涤后加发光底物,检测发光强度,测定玉米样品中黄曲霉毒素B1的含量.此方法标准曲线线性范围为0.05～5ng/mL,检测限为0.02ng/mL,批内相对标准偏差小于9%,批间相对标准偏差小于15%,具有良好的稳定性和重现性.     

有机分子修饰铁粒子表面改善水基磁流变液的抗氧化性和稳定性

采用有机分子N-葡萄糖基乙二胺三乙酸(GED3A)修饰羰基铁(CI)粒子表面的方法, 制备了复合磁性粒子(CMPs)和水基磁流变(MR)液; 用扫描电镜(SEM)、振动样品磁强计(VSM)和带磁场供应和控制器的流变仪表征了CMPs及水基MR液的性能; 同时, 通过稳定性试验、空气氧化试验、酸腐蚀试验分别分析了水基MR液的分散稳定性和抗氧化性. 结果表明, 用此方法制备的CMPs具有良好的软磁性能, 饱和磁化强度(Ms)为182.2 emu·g-1, 矫顽力(Hc)为4.17 Oe, 剩磁(Mr)为0.1944 emu·g-1. 与原CI粒子水基MR液比较, 制备的水基MR液的沉降率下降了约24.4%; 在酸的浓度为0.02-0.10 mol·L-1范围内, 抗HCl氧化的能力提高了92.6%-95.7%, 抗HNO3氧化的能力提高了86.1%-93.8%.     

Synthesis and morphology of an iron oxide/polystyrene/poly(isopropylacrylamide‐co‐methacrylic acid) thermosensitive magnetic composite latex with potassium persulfate as the initiator

In this work, an iron oxide (Fe₃O₄)/polystyrene (PS)/poly(N‐isopropylacryl amide‐co‐methacrylic acid) [P(NIPAAM–MAA)] thermosensitive magnetic composite latex was synthesized by the method of two‐stage emulsion polymerization. The Fe₃O₄ particles were prepared by a traditional coprecipitation method and then surface‐treated with either a PAA oligomer or lauric acid to form a stable ferrofluid. The first stage for the synthesis of the thermosensitive magnetic composite latex was to synthesize PS in the presence of a ferrofluid by emulsion polymerization to form Fe₃O₄/PS composite latex particles. Following the first stage of reaction, the second stage of polymerization was carried out with N‐isopropylacryl amide and methacrylic acid as monomers and with Fe₃O₄/PS latex as seeds. The Fe₃O₄/PS/[P(NIPAAM–MAA)] thermosensitive magnetic particles were thus obtained. The effects of the ferrofluids on the reaction kinetics, morphology, and particle size of the latex were discussed. A reaction mechanism was proposed in accordance with the morphology observation of the latex particles. The thermosensitive property of the thermosensitive magnetic composite latex was also studied. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3062–3072, 2007