High‐Performance CsPb1−xSnxBr3 Perovskite Quantum Dots for Light‐Emitting Diodes

All inorganic CsPbBr₃ perovskite quantum dots (QDs) are potential emitters for electroluminescent displays. We have developed a facile hot‐injection method to partially replace the toxic Pb²⁺ with highly stable Sn⁴⁺. Meanwhile, the absolute photoluminescence quantum yield of CsPb_1−x Sn_x Br₃ increased from 45 % to 83 % with Sn^IV substitution. The transient absorption (TA) exciton dynamics in undoped CsPbBr₃ and CsPb_0.67Sn_0.33Br₃ QDs at various excitation fluences were determined by femtosecond transient absorption, time‐resolved photoluminescence, and single‐dot spectroscopy, providing clear evidence for the suppression of trion generation by Sn doping. These highly luminescent CsPb_0.67Sn_0.33Br₃ QDs emit at 517 nm. A device based on these QDs exhibited a luminance of 12 500 cd m⁻², a current efficiency of 11.63 cd A⁻¹, an external quantum efficiency of 4.13 %, a power efficiency of 6.76 lm w⁻¹, and a low turn‐on voltage of 3.6 V, which are the best values among reported tin‐based perovskite quantum‐dot LEDs.     

Lead‐Free,Air‐Stable All‐Inorganic Cesium Bismuth Halide Perovskite Nanocrystals

Lead‐based perovskite nanocrystals (NCs) have outstanding optical properties and cheap synthesis conferring them a tremendous potential in the field of optoelectronic devices. However, two critical problems are still unresolved and hindering their commercial applications: one is the fact of being lead‐based and the other is the poor stability. Lead‐free all‐inorganic perovskite Cs₃Bi₂X₉ (X=Cl, Br, I) NCs are synthesized with emission wavelength ranging from 400 to 560 nm synthesized by a facile room temperature reaction. The ligand‐free Cs₃Bi₂Br₉ NCs exhibit blue emission with photoluminescence quantum efficiency (PLQE) about 0.2 %. The PLQE can be increased to 4.5 % when extra surfactant (oleic acid) is added during the synthesis processes. This improvement stems from passivation of the fast trapping process (2–20 ps). Notably, the trap states can also be passivated under humid conditions, and the NCs exhibited high stability towards air exposure exceeding 30 days.     

Lead‐Free,Air‐Stable All‐Inorganic Cesium Bismuth Halide Perovskite Nanocrystals

Lead‐based perovskite nanocrystals (NCs) have outstanding optical properties and cheap synthesis conferring them a tremendous potential in the field of optoelectronic devices. However, two critical problems are still unresolved and hindering their commercial applications: one is the fact of being lead‐based and the other is the poor stability. Lead‐free all‐inorganic perovskite Cs₃Bi₂X₉ (X=Cl, Br, I) NCs are synthesized with emission wavelength ranging from 400 to 560 nm synthesized by a facile room temperature reaction. The ligand‐free Cs₃Bi₂Br₉ NCs exhibit blue emission with photoluminescence quantum efficiency (PLQE) about 0.2 %. The PLQE can be increased to 4.5 % when extra surfactant (oleic acid) is added during the synthesis processes. This improvement stems from passivation of the fast trapping process (2–20 ps). Notably, the trap states can also be passivated under humid conditions, and the NCs exhibited high stability towards air exposure exceeding 30 days.     

Ultrathin Two‐Dimensional Organic–Inorganic Hybrid Perovskite Nanosheets with Bright,Tunable Photoluminescence and High Stability

Two‐dimensional (2D) organic–inorganic hybrid perovskite nanosheets (NSs) are attracting increasing research interest due to their unique properties and promising applications. Here, for the first time, we report the facile synthesis of single‐ and few‐layer free‐standing phenylethylammonium lead halide perovskite NSs, that is, (PEA)₂PbX₄ (PEA=C₈H₉NH₃, X=Cl, Br, I). Importantly, their lateral size can be tuned by changing solvents. Moreover, these ultrathin 2D perovskite NSs exhibit highly efficient and tunable photoluminescence, as well as superior stability. Our study provides a simple and general method for the controlled synthesis of 2D perovskite NSs, which may offer a new avenue for their fundamental studies and optoelectronic applications.     

Ultrathin Two‐Dimensional Organic–Inorganic Hybrid Perovskite Nanosheets with Bright,Tunable Photoluminescence and High Stability

Two‐dimensional (2D) organic–inorganic hybrid perovskite nanosheets (NSs) are attracting increasing research interest due to their unique properties and promising applications. Here, for the first time, we report the facile synthesis of single‐ and few‐layer free‐standing phenylethylammonium lead halide perovskite NSs, that is, (PEA)₂PbX₄ (PEA=C₈H₉NH₃, X=Cl, Br, I). Importantly, their lateral size can be tuned by changing solvents. Moreover, these ultrathin 2D perovskite NSs exhibit highly efficient and tunable photoluminescence, as well as superior stability. Our study provides a simple and general method for the controlled synthesis of 2D perovskite NSs, which may offer a new avenue for their fundamental studies and optoelectronic applications.     

Phase Regulation Strategy of Perovskite Nanocrystals from 1D Orthomorphic NH4PbI3 to 3D Cubic (NH4)0.5Cs0.5Pb(I0.5Br0.5)3 Phase Enhances Photoluminescence

This work reports this first synthesis of 1D orthomorphic NH₄PbI₃ perovskite nanocrystals (NCs) considering the role of inorganic ammonium ions at the nanoscale. The addition of bromide ions at the halogen site did not improve the photoluminescence properties. Furthermore, the 3D cubic phase of (NH₄)_0.5Cs_0.5Pb(I_0.5Br_0.5)₃ NCs with bright photoluminescence was synthesized by adding Cs ions into the crystal lattice of (NH₄)Pb(I_0.5Br_0.5)₃. Moreover, the photophysical properties of different phase structures were studied using femtosecond transient absorption (FTA) spectroscopy. The ultrafast trap state capture process is a key factor in the change of photoluminescence properties and the cubic phase may be the best structure for photoluminescence. These results suggest that the ammonium ion perovskite (AIP) nanocrystals could be potential materials for optoelectronic applications through A‐site cation substitution.     

Benign‐by‐Design Solventless Mechanochemical Synthesis of Three‐, Two‐, and One‐Dimensional Hybrid Perovskites

Organic–inorganic hybrid perovskites have attracted significant attention owing to their extraordinary optoelectronic properties with applications in the fields of solar energy, lighting, photodetectors, and lasers. The rational design of these hybrid materials is a key factor in the optimization of their performance in perovskite‐based devices. Herein, a mechanochemical approach is proposed as a highly efficient, simple, and reproducible method for the preparation of four types of hybrid perovskites, which were obtained in large amounts as polycrystalline powders with high purity and excellent optoelectronics properties. Two archetypal three‐dimensional (3D) perovskites (MAPbI₃ and FAPbI₃) were synthesized, together with a bidimensional (2D) perovskite (Gua₂PbI₄) and a “double‐chain” one‐dimensional (1D) perovskite (GuaPbI₃), whose structure was elucidated by X‐ray diffraction.     

A Highly Red‐Emissive Lead‐Free Indium‐Based Perovskite Single Crystal for Sensitive Water Detection

Low‐dimensional luminescent lead halide perovskites have attracted tremendous attention for their fascinating optoelectronic properties, while the toxicity of lead is still considered a drawback. Herein, we report a novel lead‐free zero‐dimensional (0D) indium‐based perovskite (Cs₂InBr₅?H₂O) single crystal that is red‐luminescent with a high photoluminescence quantum yield (PLQY) of 33 %. Experimental and computational studies reveal that the strong PL emission might originate from self‐trapping excitons (STEs) that result from an excited‐state structural deformation. More importantly, the in situ transformation between hydrated Cs₂InBr₅?H₂O and the dehydrated form is accompanied with a switchable dual emission, which enables it to act as a PL water‐sensor in humidity detection or the detection of traces of water in organic solvents.     

Air‐Stable,Lead‐Free Zero‐Dimensional Mixed Bismuth‐Antimony Perovskite Single Crystals with Ultra‐broadband Emission

Lead‐free zero‐dimensional (0D) organic‐inorganic metal halide perovskites have recently attracted increasing attention for their excellent photoluminescence properties and chemical stability. Here, we report the synthesis and characterization of an air‐stable 0D mixed metal halide perovskite (C₈NH₁₂)₄Bi_0.57Sb_0.43Br₇?H₂O, in which individual [BiBr₆]^3? and [SbBr₆]^3? octahedral units are completely isolated and surrounded by the large organic cation C₈H₁₂N⁺. Upon photoexcitation, the bulk crystals exhibit ultra‐broadband emission ranging from 400 to 850 nm, which originates from both free excitons and self‐trapped excitons. This is the first example of 0D perovskites with broadband emission spanning the entire visible spectrum. In addition, (C₈NH₁₂)₄Bi_0.57Sb_0.43Br₇?H₂O exhibits excellent humidity and light stability. These findings present a new direction towards the design of environmentally‐friendly, high‐performance 0D perovskite light emitters.     

Air‐Stable,Lead‐Free Zero‐Dimensional Mixed Bismuth‐Antimony Perovskite Single Crystals with Ultra‐broadband Emission

Lead‐free zero‐dimensional (0D) organic‐inorganic metal halide perovskites have recently attracted increasing attention for their excellent photoluminescence properties and chemical stability. Here, we report the synthesis and characterization of an air‐stable 0D mixed metal halide perovskite (C₈NH₁₂)₄Bi_0.57Sb_0.43Br₇?H₂O, in which individual [BiBr₆]^3? and [SbBr₆]^3? octahedral units are completely isolated and surrounded by the large organic cation C₈H₁₂N⁺. Upon photoexcitation, the bulk crystals exhibit ultra‐broadband emission ranging from 400 to 850 nm, which originates from both free excitons and self‐trapped excitons. This is the first example of 0D perovskites with broadband emission spanning the entire visible spectrum. In addition, (C₈NH₁₂)₄Bi_0.57Sb_0.43Br₇?H₂O exhibits excellent humidity and light stability. These findings present a new direction towards the design of environmentally‐friendly, high‐performance 0D perovskite light emitters.     

Alloying n‐Butylamine into CsPbBr3 To Give a Two‐Dimensional Bilayered Perovskite Ferroelectric Material

Cesium‐lead halide perovskites (e.g. CsPbBr₃) have gained attention because of their rich physical properties, but their bulk ferroelectricity remains unexplored. Herein, by alloying flexible organic cations into the cubic CsPbBr₃, we design the first cesium‐based two‐dimensional (2D) perovskite ferroelectric material with both inorganic alkali metal and organic cations, (C₄H₉NH₃)₂CsPb₂Br₇ ( 1 ). Strikingly, 1 shows a high Curie temperature (T_c=412 K) above that of BaTiO₃ (ca. 393 K) and notable spontaneous polarization (ca. 4.2 μC cm^?2), triggered by not only the ordering of organic cations but also atomic displacement of inorganic Cs⁺ ions. To our knowledge, such a 2D bilayered Cs⁺‐based metal–halide perovskite ferroelectric material with inorganic and organic cations is unprecedented. 1 also shows photoelectric semiconducting behavior with large “on/off” ratios of photoconductivity (>10³).     

Lead‐Free,Blue Emitting Bismuth Halide Perovskite Quantum Dots

Lead halide perovskite quantum dots (QDs) are promising candidates for future lighting applications, due to their high quantum yield, narrow full width at half maximum (FWHM), and wide color gamut. However, the toxicity of lead represents a potential obstacle to their utilization. Although tin(II) has been used to replace lead in films and QDs, the high intrinsic defect density and oxidation vulnerability typically leads to unsatisfactory material properties. Bismuth, with much lower toxicity than lead, is promising to constitute lead‐free perovskite materials because Bi³⁺ is isoelectronic to Pb²⁺ and more stable than Sn²⁺. Herein we report, for the first time, the synthesis and optical characterization of MA₃Bi₂Br₉ perovskite QDs with photoluminescence quantum yield (PLQY) up to 12 %, which is much higher than Sn‐based perovskite nanocrystals. Furthermore, the photoluminescence (PL) peaks of MA₃Bi₂X₉ QDs could be easily tuned from 360 to 540 nm through anion exchange.     

Lead‐Free,Blue Emitting Bismuth Halide Perovskite Quantum Dots

Lead halide perovskite quantum dots (QDs) are promising candidates for future lighting applications, due to their high quantum yield, narrow full width at half maximum (FWHM), and wide color gamut. However, the toxicity of lead represents a potential obstacle to their utilization. Although tin(II) has been used to replace lead in films and QDs, the high intrinsic defect density and oxidation vulnerability typically leads to unsatisfactory material properties. Bismuth, with much lower toxicity than lead, is promising to constitute lead‐free perovskite materials because Bi³⁺ is isoelectronic to Pb²⁺ and more stable than Sn²⁺. Herein we report, for the first time, the synthesis and optical characterization of MA₃Bi₂Br₉ perovskite QDs with photoluminescence quantum yield (PLQY) up to 12 %, which is much higher than Sn‐based perovskite nanocrystals. Furthermore, the photoluminescence (PL) peaks of MA₃Bi₂X₉ QDs could be easily tuned from 360 to 540 nm through anion exchange.     

Lead‐Free Halide Double Perovskite Cs2AgBiBr6 with Decreased Band Gap

Environmentally friendly halide double perovskites with improved stability are regarded as a promising alternative to lead halide perovskites. The benchmark double perovskite, Cs₂AgBiBr₆, shows attractive optical and electronic features, making it promising for high‐efficiency optoelectronic devices. However, the large band gap limits its further applications, especially for photovoltaics. Herein, we develop a novel crystal‐engineering strategy to significantly decrease the band gap by approximately 0.26 eV, reaching the smallest reported band gap of 1.72 eV for Cs₂AgBiBr₆ under ambient conditions. The band‐gap narrowing is confirmed by both absorption and photoluminescence measurements. Our first‐principles calculations indicate that enhanced Ag–Bi disorder has a large impact on the band structure and decreases the band gap, providing a possible explanation of the observed band‐gap narrowing effect. This work provides new insights for achieving lead‐free double perovskites with suitable band gaps for optoelectronic applications.     

All‐Inorganic CsPb1−xGexI2Br Perovskite with Enhanced Phase Stability and Photovoltaic Performance

Compared with organic‐inorganic perovskites, all‐inorganic cesium‐based perovskites without volatile organic compounds have gained extensive interests because of the high thermal stability. However, they have a problem on phase transition from cubic phase (active for photo‐electric conversion) to orthorhombic phase (inactive for photo‐electric conversion) at room temperature, which has hindered further progress. Herein, novel inorganic CsPb_1?xGe_xI₂Br perovskites were prepared in humid ambient atmosphere without a glovebox. The phase stability of the all‐inorganic perovskite was effectively enhanced after germanium addition. In addition, the highest power conversion efficiency of 10.8 % with high open‐circuit voltage (V_OC) of 1.27 V in a planar solar cell based on CsPb_0.8Ge_0.2I₂Br perovskite was achieved. Furthermore, the highest V_OC up to 1.34 V was obtained by CsPb_0.7Ge_0.3I₂Br perovskite, which is a remarkable record in the field of all‐inorganic perovskite solar cells. More importantly, all the photovoltaic parameters of CsPb_0.8Ge_0.2I₂Br perovskite solar cells showed nearly no decay after 7 h measurement in 50–60 % relative humidity without encapsulation.     

High‐Purity Inorganic Perovskite Films for Solar Cells with 9.72 % Efficiency

All‐inorganic perovskite solar cells with high efficiency and improved stability are promising for commercialization. A multistep solution‐processing method was developed to fabricate high‐purity inorganic CsPbBr₃ perovskite films for use in efficient solar cells. By tuning the number of deposition cycles (n) of a CsBr solution, the phase conversion from CsPb₂Br₅ (n ≤3), to CsPbBr₃ (n=4), and Cs₄PbBr₆ (n≥5) was optimized to achieve vertical‐ and monolayer‐aligned grains. Upon interfacial modification with graphene quantum dots, the all‐inorganic perovskite solar cell (without a hole‐transporting layer) achieved a power conversion efficiency (PCE) as high as 9.72 % under standard solar illumination conditions. Under challenging conditions, such as 90 % relative humidity (RH) at 25 °C or 80 °C at zero humidity, the optimized device retained 87 % PCE over 130 days or 95 % over 40 days, compared to the initial efficiency.     

2,2′‐(Ethane‐1,2‐diyl)bis[2‐(5‐bromothiophen‐2‐yl)‐1,3‐dioxolane] at 100 K refined using a multipolar atom model

The title compound, C₁₆H₁₆Br₂O₄S₂, which is a precursor for the synthesis of oligothiophenes and their substituted homologues, was synthesized and its X‐ray crystal structure determined at 100 K. The experimental electron‐density parameters for the available atom types were transferred from the ELMAM2 database. The compound lies about an inversion centre, which coincides with the mid‐point of a C—C bond. The molecules in the crystal are linked by several types of weak interactions; the largest contact surfaces are for H...H and H...Br.     

All‐Inorganic Lead‐Free 0D Perovskites by a Doping Strategy to Achieve a PLQY Boost from <2 % to 90 %

Zero‐dimensional (0D) lead‐free perovskites have unique structures and optoelectronic properties. Undoped and Sb‐doped all inorganic, lead‐free, 0D perovskite single crystals A₂InCl₅(H₂O) (A=Rb, Cs) are presented that exhibit greatly enhanced yellow emission. To study the effect of coordination H₂O, Sb‐doped A₃InCl₆ (A=Rb, Cs) are also synthesized and further studied. The photoluminescence (PL) color changes from yellow to green emission. Interestingly, the photoluminescence quantum yield (PLQY) realizes a great boost from <2 % to 85–95 % through doping Sb³⁺. We further explore the effect of Sb³⁺ dopants and the origin of bright emission by ultrafast transient absorption techniques. Furthermore, Sb‐doped 0D rubidium indium chloride perovskites show excellent stability. These findings not only provide a way to design a set of new high‐performance 0D lead‐free perovskites, but also reveal the relationship between structure and PL properties.     

Band‐Edge Luminescence from Oxide and Halide Perovskite Semiconductors

Because perovskite crystals exhibit unique magnetic, conductive, and optical properties, they have been the subject of many fundamental investigations in various research fields. However, investigations related to their use as optoelectronic device materials are still in their early days. Regarding oxide perovskites, which have been investigated for a long time, the efficiency of photoluminescence (PL) induced by band‐to‐band transitions is extremely low because of the localized nature of the carriers in these materials. On the other hand, halide perovskites exhibit a highly efficient band‐edge PL attributable to the recombination of delocalized photocarriers. Therefore, it is expected that this class of high‐quality materials will be advantageous for optoelectronic devices such as solar cells and light‐emitting diodes. In this Minireview, we discuss various aspects of the PL properties and carrier dynamics of SrTiO₃ and CH₃NH₃PbX₃ (X=I, Br), which are representative oxide and halide perovskites.     

Highly Luminescent Cesium Lead Halide Perovskite Nanocrystals with Tunable Composition and Thickness by Ultrasonication

We describe the simple, scalable, single‐step, and polar‐solvent‐free synthesis of high‐quality colloidal CsPbX₃ (X=Cl, Br, and I) perovskite nanocrystals (NCs) with tunable halide ion composition and thickness by direct ultrasonication of the corresponding precursor solutions in the presence of organic capping molecules. High angle annular dark field scanning transmission electron microscopy (HAADF‐STEM) revealed the cubic crystal structure and surface termination of the NCs with atomic resolution. The NCs exhibit high photoluminescence quantum yields, narrow emission line widths, and considerable air stability. Furthermore, we investigated the quantum size effects in CsPbBr₃ and CsPbI₃ nanoplatelets by tuning their thickness down to only three to six monolayers. The high quality of the prepared NCs (CsPbBr₃) was confirmed by amplified spontaneous emission with low thresholds. The versatility of this synthesis approach was demonstrated by synthesizing different perovskite NCs.