Fabrication and characterization of solid-core photonic crystal fiber with steering-wheel air-cladding for strong evanescent field overlap

We report the fabrication and characterization of a photonic crystal fiber with solid-core and steering-wheel pattern air-cladding (SW-PCF). Specifically, SW-PCF is fabricated using sol-gel casting technique. Attenuation spectrum shows the fiber losses of 0.14 dB/m, 0.087 dB/m, and 0.0 32 dB/m at wavelengths of 850 nm, 1000 nm, and 1500 nm, respectively, while the cut-off wavelength for single-mode operation is 1360 nm. Near-field imaging is used for the determination of mode-field diameter. The fiber presents the anomalous dispersion expending to short wavelength range with high non-linearity. Tapered SW-PCFs in the transverse geometries are numerically calculated, which suggests that the tapering of fiber holds a significant promise for the enhancement of power overlap in air holes. Properly designed and fabricated SW-PCF can thus be utilized as attractive platform for evanescent field sensing and detection.     

A novel ultrahigh birefringent hole-assistant microstructured optical fiber with low confinement loss

A novel hole-assistant microstructured optical fiber with a rectangle-like core and four elliptical holes as cladding is proposed. By employing a full-vector finite element method, the modal birefringence and confinement loss are numerically investigated, and the results show that in such a structure, an ultrahigh modal birefringence of 2.91×10⁻² and a low confinement loss (<1 dB/km) can be simultaneously obtained at excited wavelength of 1.55 μm. It is significant that such a microstructured optical fiber is easily fabricated with its simple structure and exhibits improved performance.     

Ultra-wideband single-polarization single-mode, high nonlinearity photonic crystal fiber

We report a novel design of photonic crystal fiber (PCF) with a rectangular array of four closely-spaced, highly elliptical air holes in the core region and a circular-air-hole cladding. The proposed PCF is able to support ultra-wideband single-polarization single-mode (SPSM) transmission from the visible band to the near infrared band. With the aid of the inner cladding formed by the central air holes, one polarization of the fundamental mode can be cut off at very short wavelengths and ultra-wideband SPSM propagation can be achieved. The inner cladding also suppresses the higher order modes and allows large air filling fraction in the outer cladding while the proposed fiber remains SPSM, which significantly reduces the mode effective area and the confinement loss. Our simulation results indicate that the proposed PCF has a 1540 nm SMSP range with <0.25 dB/km confinement loss and an effective area of 2.2 μm². Moreover, the group velocity dispersion (GVD) of the proposed PCF can also be tuned to be flat and near zero at the near infrared band (∼800 nm) by optimizing the outer cladding structure, potentially enabling many nonlinear applications.     

Photonic crystal fiber with high birefringence and low confinement loss

In this paper, a highly birefringent index-guiding photonic crystal fiber with low confinement loss is proposed by enlarging the central row of air holes in the structure. By employing the multipole method, properties of this structure, including the effective index, birefringence and confinement loss, are investigated. Simulation results indicate that high birefringence of 1.65 × 10⁻³ can be reached at the wavelength of 1.55 μm, and a low confinement loss on the order of 10⁻⁶ dB/km can be achieved at the same wavelength. Moreover, the impacts of air hole sizes on birefringence and confinement loss are also analyzed in detail.     

A broadband ultra flattened chromatic dispersion microstructured fiber for optical communications

A double-cladding microstructured fiber (MF) is proposed in this paper. The inner cladding of this optical fiber is composed of elliptical air holes and silica. The dependence of dispersion on the diameter of the air holes, the pitch, and the axes of the elliptical holes is investigated numerically. The proposed fiber possesses an ultra flattened dispersion curve over a wide wavelength range, and its dispersion value is small. The effective mode area is approaching to 60 μm², and the confinement loss is as low as <0.025 dB/km at 1550 nm. While choosing suitable structure parameters, an ultra dispersion-flattened MF within a broadband from1000 nm to 1900 nm can be achieved. The dispersion fluctuation is 0.6-1.0 ps/(nm·km) in all S, C and L band.     

Research on terahertz photonic crystal fiber characteristics with high birefringence

A new high birefringence photonic crystal fiber is proposed within the terahertz frequency region. It has two types of claddings, the inner is composed of six ellipse air holes arranged in a honeycomb array and the outer surrounded by circle holes. By using the full vector finite element method with anisotropic perfectly matched layers absorption boundary condition, the birefringence, chromatic dispersion and confinement loss of the fundamental mode are evaluated. The results show that the birefringence can achieve 10⁻³ when the wavelength increases from 600 μm to 900 μm. This structure will provide some reference value for the designing of high birefringence terahertz photonic crystal fiber.     

Design of Topas microstructured fiber with ultra-flattened chromatic dispersion and high birefringence

A microstructured polymer optical fiber (mPOF) with both ultra-flattened near-zero chromatic dispersion and high birefringence based on Topas cyclic olefin copolymer is designed. Three rings of uniform elliptical air holes are arranged in triangular lattice in the cladding and an extra small defected hole is introduced in the fiber core. Guided modes, dispersion, birefringence and mode confinement properties of the designed mPOF are investigated by using the full-vector finite element method. Dispersion values between ± 0.5 ps/km/nm over the wavelength 1.1-1.7 μm and high birefringence of the order of 10⁻³ are obtained for the optimized fiber structure. Low confinement losses and small effective mode area are obtained at the same time. The relatively simple architecture of the proposed Topas mPOF can be fabricated by our extrusion-stretching techniques.     

Design and analysis of a photonic crystal fiber with four-hole unit

A novel photonic crystal fiber (PCF) based on a four-hole unit is proposed in order to meet the requirements of high birefringence, negative dispersion and confinement loss in fiber-optic communication. The proposed design has been simulated based on the full vector finite element method (FVFEM) and anisotropic perfectly matched layers (APML). Analysis results show that the proposed PCF can achieve a high birefringence to the order of 10⁻² at the wavelength of 1.55 μm, a large negative dispersion over a wide wavelength range and confinement losses lower than 10⁻⁹ dB/m simultaneously, which has important applications in polarization-maintaining (PM) fibers, single-polarization single-mode (SPSM) fibers, dispersion compensation fibers and so on.     

High birefringence and low loss circular air-holes photonic crystal fiber using complex unit cells in cladding

We propose a high birefringence and low loss index-guiding photonic crystal fiber (PCF) using the complex unit cells in cladding by the finite-element method. Results show that the birefringence and confinement loss in such PCF fiber is determined not only by the whole cladding asymmetry but also the shape of the PCF core. The maximal modal birefringence and lowest confinement loss of our proposed structures at the excitation wavelength of λ = 1550 nm can be achieved at 8.7 × 10⁻³ and 5.27 × 10⁻⁵ dB/km, respectively.     

Fabrication of low OH loss holey fibers with varying air hole sizes and their optical properties

We experimentally investigate a flexible fabrication technique for low OH and transmission losses holey fibers with a Ge-doped core and air holes in a silica cladding region. Versatile holey fibers of different size, pitch, and shape of air holes were achieved by controlling the temperature and heating time of the holey fiber preform. In addition, we suppress the OH loss of less than ∼0.323 dB/km at 1383 nm. After fabricating holey fibers, we measure their optical properties including cut-off wavelength, mode field diameter, splicing loss, dispersion, bending loss, and polarization dependent loss based on the size of air holes. The total transmission loss was measured to be ∼0.226 dB/km at 1550 nm by improving the fabrication process. After fabricating optical patch cord based on holey fibers, we measured the long-term stability of the fabricated holey fiber by using the temperature cycling technique for 24 and obtained low power fluctuation of 0.2 dB. We achieve the high quality holey fiber with a low bending loss of ∼0.04 dB/turn under a bending radius of 2.5 mm at 1550 nm. We also obtain a tunable band rejection filter with a number of bending turns.     

Supercontinuum generation in square photonic crystal fiber with nearly zero ultra-flattened chromatic dispersion and fabrication tolerance analysis

This paper presents a simple index-guiding square photonic crystal fiber (SPCF) where the core is surrounded by air holes with two different diameters. The proposed design is simulated through an efficient full-vector modal solver based on the finite difference method with anisotropic perfectly matched layers absorbing boundary condition. The nearly zero ultra-flattened dispersion SPCF with low confinement loss, small effective area as well as broadband supercontinuum (SC) spectra is targeted. Numerical results show that the designed SPCF has been achieved at a nearly zero ultra-flattened dispersion of 0 ± 0.25 ps/(nm·km) in a wavelength range of 1.38 μm to 1.89 μm (510 nm band) which covers E, S, C, L and U communication bands, a low confinement loss of less than 10⁻⁷ dB/m in a wavelength range of 1.3 μm to 2.0 μm and a wide SC spectrum (FWHM = 450 nm) by using picosecond pulses at a center wavelength of 1.55 μm. We then analyze the sensitivity of chromatic dispersion to small variations from the optimum value of specific structural parameters. The proposed index-guiding SPCF can be applicable in supercontinuum generation (SCG) covering such diverse fields as spectroscopy applications and telecommunication dense wavelength division multiplexing (DWDM) sources.     

太赫兹正六边形光子晶体光纤的液体传感

设计了一种分别填充水、酒精和苯炔等边三角形空气孔纤芯、包层空气孔排列为正六边形结构、以环烯烃共聚物作为基底材料的光子晶体光纤,利用有限元法模拟了0.3~1.5 THz频带内的液体传感特性。结果表明,设计的光子晶体光纤的灵敏度系数很高,当纤芯空气孔直径d₁=2.4 μm、包层空气填充比为0.3时,苯炔在频率0.3 THz的相对灵敏性系数最高为37.63%,在1.5 THz,限制损耗的数量级可以降至10^-7。     

Loss-reduced highly birefringent selectively liquid-filled photonic crystal fibers

We have theoretically investigated the birefringence and loss properties of the selectively liquid-filled photonic crystal fibers with the liquid asymmetrically infiltrated into one-line air holes along x-axis. A high birefringence value B = 1.74 × 10⁻³ can be achieved at λ = 1.55 μm. By varying the index of the infiltrating liquid, the birefringence values are shown to be well tuned. In addition, the confinement losses can be efficiently reduced by diminishing the number of liquid holes, which is quite useful for optical devices.     

New nonlinear and dispersion flattened photonic crystal fiber with low confinement loss

A new nonlinear dispersion flattened photonic crystal fiber with low confinement loss is proposed. This fiber has threefold symmetry core. The doped region in the core and the big air-holes in the 1st ring can make high nonlinearity in the PCF. And the small air-holes in the 1st ring and the radial increasing diameters air-holes rings in cladding can be used to achieve the dispersion properties of the PCF. We can achieve the optimized optical properties by carefully selecting the PCFs structure parameters. A PCF with flattened dispersion is obtained. The dispersion is less than 0.8 ps/(nm km) and is larger than −0.7 ps/(nm km) from 1.515 μm to 1.622 μm. The nonlinear coefficient is about 12.6456 W⁻¹ km⁻¹, the fundamental mode area is about 10.2579 μm². The confinement loss is 0.30641 dB/km. This work may be useful for effective design and fabrication of dispersion flattened photonic crystal fibers with high nonlinearities.     

基于椭圆孔包层和微型双孔纤芯的新型高双折射光子晶体光纤

设计了一种新型高双折射光子晶体光纤,即其包层引入椭圆形空气孔,且以三角晶格方式周期排列,纤芯引入亚波长尺寸(~0.16 μm)的微型双孔结构阵列.采用全矢量有限元法和各向异性完美匹配层边界条件分析了该型光子晶体光纤的双折射特性和色散特性,详细介绍了该光子晶体光纤在不同的椭圆率、椭圆归一化面积、微型双孔孔径、两小孔之间间距的情况下双折射和限制损耗随波长的变化曲线.模拟结果表明,通过同时在包层和纤芯引入非对称性,获得了较高的双折射(~10^-3量级)和极低(~10^-4 dB/km)的限制损耗.提供了一种新的光子晶体光纤设计方法,即通过同时在包层和纤芯引入新结构来同时获得高双折射和低损耗.     

Highly birefringent photonic crystal fiber with low confinement loss at wavelength 1.55 μm

High birefringent and low confinement loss of photonic crystal fiber is reported at wavelength 1.55 μm via Full-Vectorial Finite Element Method (FV-FEM). By suitable designing of three ring hexagonal solid core fiber and also by introducing a pair of large holes along x-axis near the core region, high modal birefringence 3 × 10⁻³ and low confinement loss 0.019 dB/km are found at wavelength 1.55 μm.     

Dispersion-ultra-flattened square-lattice photonic crystal fiber with small effective mode area and low confinement loss

Proposed in this paper is a simple square-lattice photonic crystal fiber (PCF) with nearly zero flattened dispersion (NZFD) over a wide wavelength span. We make a trade-off between the coupling efficiency and the effective mode area in order to obtain relatively low confinement loss and high nonlinearity. Via full-vector finite element method with hybrid edge/node elements, over 1137–1710 nm, the dispersion coefficient is 0.3 ± 0.3 ps/(km nm), the confinement loss is relatively low, in level of 10⁻⁷–10⁻⁴ dB/km and the effective mode area remains 5.88–6.59 μm².     

Simultaneous strain and temperature measurement based on a photonic crystal fiber modal-interference interacting with a long period fiber grating

An alternative all-fiber sensor for simultaneous strain and temperature measurement based on a photonic crystal fiber (PCF) spliced between single-mode fibers cascaded with a long period grating (LPG) is proposed. By collapsing the air holes at two splicing regions along the PCF, a simple but effective modal-interference (MI) is occurred between the core and cladding modes of the PCF. Due to the different responses on the changes of strain and temperature on the MI and the cascaded LPG, the strain and temperature can be measured simultaneously. Experimental results show that the sensing resolution of 9.1 με in strain measurement is experimentally achieved over a range of 2640 με, while the temperature sensing resolution is 0.27 °C within a range of 30-100 °C.     

Optimization of reversible LPFG for sensing application

We report here for the first time to our knowledge the characterization of mechanically induced long period fiber gratings in novel MSM fiber structure. Reversible grating of same period and length was induced in single mode fiber, multimode fiber and novel multimode-singlemode-multimode (MSM) fiber structure. The spectral response of reversible LPFG in SMF is verified experimentally as well as from simulation results and then compared with the experimental spectral response of reversible LPFG in multimode fiber and MSM fiber structure. Reversible LPFG in novel MSM fiber structure is the most optimized and suitable grating for sensing application. For this grating we have obtained single resonant wavelength over a wide wavelength range and maximum transmission loss peak of around 20 dB.     

A novel distributed optic fiber transduser for landslides monitoring

Unstable slopes have been monitored since the beginning of the last century. Current electro-optic detection technology can achieve automatic monitoring remotely with high safety and includes such methods as time domain reflectometry, optical time domain reflectometry and Brillouin optical time domain reflectometry. However, these technologies cannot simultaneously meet the requirements of distributed sensing, high initial measurement accuracy, large sliding distance and high dynamic range. Based on the space frame theory of reinforced concrete beams, this study presents an innovative design for a distributed optic fiber sensor: a novel transduser with a bowknot. Using the optic fiber microbending loss mechanism and optical time domain reflectometry technology, bending and shear tests based on the combined fiber sensor are conducted, and the vertical displacement of midspan, optical fiber sliding distance and loss data under three different spans are collected. Feasibility study and economic analysis of the transduser used for landslide monitoring are also presented. The results show that the maximum sliding distance of our transduser is 21.8, 26.5 and 30.6 mm with corresponding initial accuracies of 1.2, 2.3 and 3.3 mm, and the dynamic ranges are 0-20.6, 0-23.2 and 0-27.3 mm. The cost of the transduser is economical at $0.15/m, which demonstrates promising economic application, high monitoring effectiveness and stability in monitoring civil works, such as slope, dam and tunnel construction and measurement.