Theoretical Study on the Mechanism of CF2 Reaction with CH2O

The insertion reaction mechanism of CF2 with CH2O was investigated at the B3LYP/6-311G（d）//MP2/6-311G（d） level. The geometric conformations at each stationary point in reaction potential surface were fully optimized and the transition states were verified by intrinsic reaction coordinate （IRC） and frequency analysis. The energies of all reactants were calculated with CCSD（T）/6-311G（d）//G2MP2 methods. Results indicated that the P1 reaction route with difuoroaldehyde as product is the dominant reaction pathway, which exhibits nucleophilic character. According to NBO analysis, the starting point of insertion reaction is the interaction between carbene LP（C3） and formaldehyde π（Cl-O2）. Besides, the thermodynamic and dynamic properties of dominated reaction （1） at different temperature were studied with statistic thermodynamic method and Eyring transition state theory adjusted by Wigner means, from which the proper temperature （500- 1200 K） of reaction （1） could be estimated. Finally, the thermo- dynamic and dynamic properties of insertion reaction mechanisms （CF2, CX2 （X = Cl, Br） with CH2O） were compared and discussed.     

邻位吡啶自由基多通道分解反应的动力学和反应机理研究

Utilizing Gaussian94 program package, all species involved in decomposition reactions of o-pyridyl radical were optimized fully at B3LYP/6-311＋＋G^＊＊ level. Intrinsic reaction coordinate calculations were employed to confirm the connections of the transition states and products, and transition states were ascertained by the number of imaginary frequency （0 or 1）. The reaction mechanism was elucidated by the vibrational mode analysis and electronic population analysis, and the reaction rate constants were calculated with transition state theory.     

A Density Functional Study on the Hydrolysis Process of Non-classical Transplatin（Ⅱ） with Two Same Planar Heterocycle Amines

In the present work, the hydrolysis process of non-classical transplatin（Ⅱ） with two same planar heterocycle amines has been studied using hybrid density functional theory （B3LYP） and IEF-PCM solvation models. Optimizations were performed at the B3LYP level using a combined basis set of （LanL2DZ＋6-31 ＋G（d,p）） with single-point energy evaluations using the B3LYP/6-31 ＋ ＋G（3df,2pd） approach in vacuo and in aqueous solution. For the obtained structures of reactants, intermediates, transition states, and products, both thermodynamic （reaction energies and Gibbs energies） and kinetic （reaction barriers） characteristics were estimated. In comparison with cisplatin, decreased activation energies were obtained. The result implies that the non-classical transplatin with two same planar heterocycle amines increases the equatorial steric effect and lowers reaction barriers, which may assist in designing novel Pt-based anticancer drugs.     

Kinetic study of electrochemically induced Michael reaction of1,4-dihydroxyanthraquinone with acetylacetone and benzoylacetone

The electrochemical oxidation of 1,4-dihydroxyanthraquinone has been studied in the presence of acetylacetone and benzoylacetone as nucleophiles in a mixture of ethanol/water by means of cyclic voltammetry as a diagnostic technique.The results indicate the participation of electrochemically produced anthraquinone in the Michael addition reaction with acetylacetone and benzoylacetone to form the corresponding new anthraquinone derivatives.On the basis of the EC mechanism,the observed homogeneous rate constants（kobs）of the reaction of anthraquinone with acetylacetone and benzoylacetone were estimated by comparing the experimental cyclic voltammograms with the digitally simulated results.     

Theoretical Study on the Reaction of PCl_3/H_2 on Silicon Substrate Surface

The reaction mechanism of PCl3/H2 on silicon substrate surface （simulated by Si4 cluster） was investigated with Density Functional Theory （DFT） at the B3LYP/6-311G^＊＊ level. On silicon substrate, PCl3 firstly undergoes dissociative adsorption, and then the adsorption product reacts with H2 via a four-step multi-channel mode to give the final product PSi4 cluster. The geometries at each stationary point were fully optimized. The possible transition states were determined by vibrational mode analysis and IRC verification. And finally, the main reaction channel was given.     

Influence of Gas Components on the Formation of Carbonyl Sulfide over Water-Gas Shift Catalyst B303Q

Water-gas shift reaction catalyst at lower temperature (200—400℃) may improve the conversion of carbon monoxide. But carbonyl sulfide was found to be present over the sulfided cobalt-molybdenum/alumina catalyst for water-gas shift reaction. The influences of temperature, space velocity, and gas components on the formation of carbonyl sulfide over sulfided cobalt-molybdenum/alumina catalyst B303Q at 200—400℃were studied in a tubular fixed-bed quartz-glass reactor under simulated water-gas shift conditions. The experimental results showed that the yield of carbonyl sulfide over B303Q catalyst reached a maximum at 220℃with the increase in temperature, sharply decreased with the increase in space velocity and the content of water vapor, increased with the increase in the content of carbon monoxide and carbon dioxide, and its yield increased and then reached a stable value with the increase in the content of hydrogen and hydrogen sulfide. The formation mechanism of carbonyl sulfide over B303Q catalyst at 200—400℃was discussed on the basis of how these factors influence the formation of COS. The yield of carbonyl sulfide over B303Q catalyst at 200-400℃was the combined result of two reactions, that is, COS was first produced by the reaction of carbon monoxide with hydrogen sulfide, and then the as-produced COS was converted to hydrogen sulfide and carbon dioxide by hydrolysis. The mechanism of COS formation is assumed as follows: sulfur atoms in the Co9S8-MOS2/Al2O3 crystal lattice were easily removed and formed carbonyl sulfide with CO, and then hydrogen sulfide in the water-gas shift gas reacted with the crystal lattice oxygen atoms in CoO-MoO3/Al2O3 to form Co9S8-MoS2/Al2O3. This mechanism for the formation of COS over water-gas shift catalyst B303Q is in accordance with the Mars-Van Krevelen's redox mechanism over metal sulfide.     

Addition Mechanisms of Phenol toward Formaldehyde under Acidic Condition： a Theoretical Investigation

The reaction mechanisms of phenol with formaldehyde in the first and second addition at the ortho- and para-position in acid solution were theoretically investigated at the PW91/DNP level with solvent effects included. The reaction of phenol with protonated methanediol firstly forms an adduct intermediate, via a SN2 mechanism with a water molecule as the leaving group. From the adduct intermediate, there are two reaction channels involving a proton transfer to form the addition products. One is that a proton directly transfers via a four-membered ring transition state with a notable energy barrier (Four-member mechanism). Another mechanism involving a water molecule as catalyst to mediate the proton transfer (WCP mechanism), is a barrierless process, indicating that the formation of the adduct intermediate, the first reaction step, is rate-limiting. The reaction products are free hydroxymethyl phenols and/or hydroxybenzy carbocation (HOC6H4CH2+) which plays an important role in the following formation of methylene and methylene ether linkages. The second addition reactions between formaldehyde and hydroxymethyl phenol at all possible reaction sites of the phenol ring in acid solution were also investigated and discussed.     

Molten-salt Synthesis and Properties of ZnS with Hexagonal Prism Morphology

ZnS with hexagonal prism morphology has been synthesized successfully by molten-salt method with ZnS nanoparticles as precursors, and the ZnS nanoparticles were prepared by one-step solid-state reaction of Zn（CH3COO）2·2H2O with Na2S·9H2O at ambient temperature. Crystal structure and morphology of the product were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy and HRTEM. Ultraviolet-visible optical absorption spectrum of the ZnS hexagonal prism shows a distinct red shift from that of bulk ZnS crystals and photoluminescence spectrum exhibits strong emissions at 380 and 500 nm, respectively. Further experiments were designed and the formation mechanism of the ZnS hexagonal prism has been also discussed in brief.     

Reaction Mechanism and Kinetics for HCCO Radical with NO

The mechanism and dynamical properties for the reaction of HCCO radicals with NO were investigated theoretically. The minimum energy paths(MEP) of the reaction were calculated by using the density functional theory(DFT) at the B3LYP/6-311 G^** level, and the energies along the MEP were further refined at the QCISD(T)/6-311 G^** level. It is found that the reaction mechanism of the title reaction involves three channels, producing HCNO CO, HONC CO and HCN CO2 products, respectively. Channel 1 is the most favorable path. The rate constant for channel 1 were calculated over a temperature range of 800-2500 K by using the canonical variational transition-state theory(CVT). The rate constant for the main path is negatively dependent on temperature, which is a characteristic of radical reactions with negative activation energy, and the variational effect for the rate constant calculation is small in the whole temperature range.     

3－烷基-4-羟基-2-噻唑烷硫酮-4-羧酸乙酯的一锅煮合成

Ethyl 3-alkyl-4-hydroxy-2-thioxothiazolidine-4-carboxylates were prepared in excellent yields from the reaction of corresponding primary amines with carbon disulfide and ethyl 3-bromo-2-oxopropanoate in the presence of anhydrous potassium phosphate in DMF at room temperature within 1 h. The structures of the highly functionalized products were corroborated spectroscopically （IR, ^1H NMR, ^13C NMR, EI-MS） and by elemental analyses. A plausible mechanism for such type of cyclization was proposed.     

Theoretical Studies on Reaction Mechanisms of HNCS with NH （ X^3∑）

The reaction mechanisms of HNCS with NH（X^3∑ ） were theoretically investigated. The minimum energy paths （MEP） of the reaction were calculated by using the density functional theory（DFT） at the B3LYP/6-311 ＋ ＋ G^＊＊ level. The equilibrium structural parameters, the harmonic vibrational frequencies, the total energies, and the zeropoint energies（ZPE） of all the species were calculated. The single-point energies along the MEP were further refined at the QCISD（T）/6-311 ＋ ＋ G^＊ ＊ level. It was found that the mechanisms of the HNCS ＋ NH（X^3∑） reaction involve two channels producing the HNC ＋ HNS and the N2H2 ＋ CS products. Channel 1 plays a dominant role and the HNC ＋ HNS are the main preduets. The reaction is exothermie.     

Theoretical Studies on the Reaction Mechanism of AsCl_3 with H_2 in the Vapor Phase Epitaxy of GaAs

The reaction mechanism of AsCl3 with H2 has been studied by using the method of BHandHLYP in Density Functional Theory (DFT) at the 6-311G** basis set. The transition state of each reaction is verified via the analysis of vibration mode and Intrinsic Reaction Coordinate (IRC). Meanwhile,single-point energy has been calculated at the QCISD(T)/6-311G** level,and the zero-point energy correction has been made to the total energy and reaction energy barrier. It shows that AsCl3 reacts with H2 to first result in AsHCl2 which may incline to self-decompose and finally afford the product As2,or continue to react with H2 to provide the product AsH3. The computing result demonstrates that the former is the main reaction channel.     

Kinetics of Reaction of Bromo-epoxy Resin with Oleic Acid catalyzed by Dimethyl benzyl amine

The kinetics of reaction of bromo-epoxy resin with oleic acid in the presence of dimethylbenzylamine catalyst was studied. The reaction is a zero order reaction with respect to oleic acid, first order with respect to epoxy group and 0. 74 order with respect to dimethylbenzylamine. The reaction rate constants at various temperatures and activation energy were determined. The mechanism of this reaction was discussed. Keywords Tetrabromobisphenol-A, Bromo-epoxy resin, Oleic acid kinetics, Reaction mechanism     

Thermal Kinetics and Decomposition Mechanism of Methylphenylphosphinic Acid and Diphenylphosphinic Acid

Thermal degradation and degradation kinetics of methylphenylphosphinic acid（MPPA） and diphenyl- phosphinic acid（DPPA） were investigated via thermogravimetric analysis（TGA） technique under non-isothermal conditions. The activation energies of the decomposition process for the two compounds were calculated through the Friedman and Kissinger-Akahira-Sunose（KAS） methods. The thermal decomposition mechanism was investigated by the Criado method based on a set of TGA data obtained at different heating rates. It was shown that the activation energies calculated from the decomposition reaction by different methods were consistent with each other. The results show that the probable model for the degradation of MPPA and DPPA agreed with the two-dimensional（D2） and three-dimensional（D4） diffusion models, respectively. Moreover, the thermodynamic functions（△H, △S, △G） of the two decomnosition reactions were also calculated.     

Reaction Mechanism Investigation Using Vibrational Mode Anal—ysis for the Multichannel Reacition of CH3O＋CO

On the basis of the computed results got by the Gaussian 94 package at B3LYP/6-311 G** level,the reaction mechanism of CH3O radical with CO has been investiagted thoroughly via the vibrational model analysis ,And the relationships among the reactants,eight transition states,four intermediates and various products involved this multichannel reation are eluci-dated,The vibrational mode anaysis shows that the reaction mechanism is relialbe.     

Synthesis and Characterization of New Macrocyclic Cu（Ⅱ） Complexes from Various Diamines, Copper（Ⅱ） Nitrate and 1,4-Bis（2-formylphenoxy）butane

Six new macrocyclic complexes were synthesized by a template reaction of 1,4-bis（2-formylphenoxy）butane with diamines and Cu（NO3）2·3H2O and their structures were proposed on the basis of elemental analysis, FT-IR, UV-Vis, magnetic susceptibility measurements, molar conductivity measurements and mass spectra. The metal to ligand molar ratios of the Cu（Ⅱ） complexes were found to be 1 ： 1. The Cu（Ⅱ） complexes are 1 ： 2 electrolytes as shown by their molar conductivities （∧m） in DMF at 10^-3 mol·L^-1. Due to the existence of free ions the Cu（Ⅱ） complexes are electrically conductive. Their configurations were proposed to be probably distorted octahedral.     

Effect of 3-Amino-5-mercapto-1,2,4-triazole on Electroless Nickel Deposition

The effects of organic additive, 3-amino-5-mercapto-1,2,4-triazole （AMTA） on bath stability, deposition rate, reaction activation energy, and Ni-P coating composition in acidic electroless nickel plating were investigated. Polarization curve method and infrared reflection spectroscopy were used to analyze the mechanism of the effect of AMTA on electroless nickel deposition. It was observed that AMTA improved bath stability, decreased the deposition rate, and increased the reaction activation energy. It was also revealed that AMTA decreased the phosphorus content and increased the sulfur content in Ni-P coating. In addition, AMTA inhibited the anodic oxidation of hypophosphite and accelerated the cathodic reduction of Ni^2＋. Infrared reflection spectroscopy result indicates that AMTA was adsorbed on the surface of Ni-P and interacted with Ni^2＋ to form an AMTA-Ni^2＋ compound. On the basis of the results of this study, the mechanism of the effect of AMTA on electroless nickel deposition was deduced.     

L-Proline catalyzed one-pot multi-component synthesis of 2-（1,3-diphenyl-1H-pyrazol-4-yl）quinazolin-4（3H）-one derivatives and their biological studies

A new series of quinazolin-4（3H）-one derivatives containing a（1 3-diphenyl-1H-pyrazol-4-yl） core with substituents at the 2-position and aromatic or heteroaromatic substituents at the 3-position were synthesized using an L-proline catalyzed one-pot multi-component reaction approach.All the synthesized compounds were characterized and screened for their antimicrobial,antifungal and anti-tubercular activities.     

DFT Studies on Hydrogen Overfall Mechanism for Catalyzed Hydroisomerization of Pentane

The mechanism and related reaction paths in the hydroisomerization of n-pentane were studied by DFT calculations at the B3LYP/6-311++G** level. Two possible transition states were theoretically predicted and verified by the vibration frequency analysis as well as the calculations of intrinsic reaction coordinates (IRC). Furthermore, the related reaction barriers were evaluated by single point energy at the MP2/6-311++G** level with zero point vibration correction of DFT method. Thus, it is concluded that the isomerization might go through two pathways.     

Optimization and statistical analysis of Au-ZnO/Al2O3 catalyst for CO oxidation

In our former work[Catal.Today 174（2011） 127],12 heterogeneous catalysts were screened for CO oxidation,and Au-ZnO/Al₂O₃ was chosen and optimized in terms of weight loadings of Au and ZnO.The present study follows on to consider the impact of process parameters （catalyst preparation and reaction conditions）,in conjunction with catalyst composition（weight loadings of Au and ZnO,and the total weight of the catalyst）,as the optimization of the process parameters simultaneously optimized the catalyst composition.The optimization target is the reactivity of this important reaction.These factors were first optimized using response surface methodology（RSM） with 25 experiments,to obtain the optimum:100 mg of 1.0%Au-4.1%ZnO/Al₂O₃ catalyst with 220℃calcination and 100℃reduction.After optimization,the main effects and interactions of these five factors were studied using statistical sensitivity analysis（SA）.Certain observations from S A were verified by reaction mechanism,reactivity test and/or characterization techniques,while others need further investigation.