原位合成氮掺杂石墨烯负载钯纳米颗粒用于催化香兰素高选择性加氢反应

通过原位合成法制备了氮掺杂石墨烯负载钯纳米颗粒催化剂Pd@N/C-2,用于催化香兰素选择性加氢反应.采用X射线衍射(XRD)、扫描电子显微镜(SEM)、X射线光电子能谱(XPS)等方法对Pd@N/C-2催化剂进行结构与性能的表征,分析表明石墨烯层在活性钯纳米颗粒表面起到了保护作用,提高了催化剂在反应条件下的稳定性,在五次循环回收实验后催化剂仍保持很高的反应活性.通过对石墨烯掺杂氮原子引入了催化反应的化学活性中心和金属纳米颗粒沉积的锚定中心,从而使石墨烯在加氢催化反应中的性能得到进一步提高.并且通过对溶剂的调控实现了香兰素分别高选择性生成香草醇和对甲基愈创木酚,在优化的反应条件下,香草醇和对甲基愈创木酚的产率分别为89%和99%.     

Pd/PdO纳米复合微球的合成及催化性能

采用甲基丙烯酸锌加速还原氯化钯(PdCl₂) 溶液中的钯离子(Pd ²⁺)为钯(Pd) 纳米微球, 进而用得到的钯纳米微球直接制备钯/氧化钯(Pd/PdO) 纳米复合微球. 通过扫描电子显微镜(SEM)、 透射电子显微镜(TEM)、 粉末X射线衍射分析(XRD)及X射线光电子能谱分析(XPS) 等方法对 Pd/PdO 纳米复合微球进行表征, 结果表明, 制备的纳米复合微球为表面粗糙、 大小均一的纳米微球. 采用紫外-可见吸收光谱(UV-Vis) 等方法考察了 Pd/PdO 纳米复合微球在对硝基苯酚(4-NTP) 还原反应中的催化性能, 发现其具有良好的催化活性和循环稳定性.     

氧化锌纳米线外延生长PdZn纳米粒子的制备及在甲醇水蒸气重整反应中的催化性能

以采用改进的气相沉积法制备的具有规整{1010}晶面的氧化锌纳米线为载体,合成了氧化锌纳米线负载钯催化剂,考察了还原温度和负载量对催化剂表面形成Pd Zn合金过程的影响,并通过适当的后处理过程制备了氧化锌纳米线外延生长Pd Zn纳米粒子催化体系.结果表明,当金属钯负载量较低(质量分数约为2%)时,经400℃还原后的催化剂表面会形成PdxZny(xy)合金,从而影响催化剂的CO选择性;提高钯负载量或还原温度有利于将PdxZny(xy)合金转化为Pd Zn合金,降低CO选择性.负载Pd Zn合金纳米粒子与氧化锌纳米线载体之间外延生长的界面关系使其在甲醇水蒸气重整反应中显示出优异的反应稳定性.     

纳米金催化(杂环)芳基酯与卤代烷经由C—O键活化的酯交换反应（英文）

报道了一种纳米金催化(杂环)芳基酯与卤代烷经由C—O键活化的酯交换反应.在一系列负载金纳米颗粒和钯纳米颗粒催化剂中,粒径为3.63nm,负载量为3wt%的Au/γ-Al_2O_3催化剂表现出最佳催化活性.该催化剂重复使用五次后仍表现出较高活性.对反应前后催化剂的X射线光电子能谱(XPS)分析表明,该反应可能是通过以Au~0为始态的催化循环来进行的.     

双中心MOFs衍生的Co-ZnO@CN纳米材料作为电化学催化剂用于氧还原反应的研究

采用水热法合成了一系列的Co-Zn-MOF材料,随后将其在高温下热解,采用自模板的方式得到双中心MOFs衍生的Co-ZnO@CN纳米催化剂.通过调节前驱体的比例和热解温度,优化了制备Co-ZnO@CN纳米催化剂的条件.利用粉末X射线衍射(XRD)和X射线光电子能谱(XPS)对Co-ZnO@CN纳米催化剂的结构及表面化学性质进行表征,采用扫描电子显微镜(SEM)和能量色散谱仪(EDS)考察了Co-ZnO@CN纳米催化剂的形貌和表面化学元素的种类和组成.通过氧还原反应(ORR)测试了催化剂的催化性能.实验结果表明当热解温度为800℃,Co与Zn摩尔质量之比为1∶2时,所得到的Co-ZnO(1∶2)@CN-800纳米催化剂的催化活性最高,其起始电势和半波电势分别为0.90和0.78 V,此外,通过计算表明该纳米催化剂在氧还原反应中氧分子还原过程遵循4e-反应路径.     

准均相的铂钯合金纳米催化剂用于芳香族化合物脱卤反应

用一锅法合成的负载于聚酰胺酸盐上的铂钯纳米催化剂,可以通过调节溶液的p H值实现催化剂与反应体系的有效分离和循环利用.准均相的铂钯催化剂应用于水相中卤代芳香族化合物的氢化脱卤反应,转化率达到99%以上,并且在重复使用5次后仍然保持很高的活性.铂钯双金属催化剂拥有比单一金属铂或者钯更高的催化活性,这主要是由于铂钯合金在催化反应时具有协同效应.利用X射线衍射仪(XRD),透射电子显微镜(TEM)等方法对催化剂进行了表征.数据表明铂钯纳米粒子负载于聚酰胺酸上以后可以在水溶液中稳定存在并且处于均匀的分布状态,纳米粒子尺寸约为4 nm.     

纳米Au/NaZSM-5催化剂的控制制备及催化性能

采用硝基甲烷还原-胶体负载法制备了粒径可控的系列高分散纳米Au/NaZSM-5催化剂. 以多相CO催化氧化为模型反应, 考察了Au微粒尺寸、pH值、反应温度、反应时间、焙烧活化温度以及Au含量等条件对催化剂性能的影响, 并利用透射电子显微镜(TEM)、X射线粉末衍射(XRD)、X射线光电子能谱(XPS)和氢气程序升温还原(H2-TPR)等技术对催化剂表面化学状态和体相结构进行了表征. 实验结果表明, 制备条件和反应条件对Au粒子尺寸及所得催化剂活性有较大影响, 催化剂性能与Au微粒粒径之间存在明显的尺寸依赖关系.     

热处理碳载Fe-三聚氰胺及Fe-g-C3N4催化剂的氧还原催化性能

分别以三聚氰胺和三聚氰胺的聚合物为配体, 采用浸渍法合成了两种氧还原反应(ORR)催化剂Fe-N/C(1)和Fe-N/C(2). 通过X射线衍射光谱(XRD)、X射线光电子能谱(XPS)、透射电子显微镜(TEM)和电化学测试对催化剂的成分、形貌和电催化性能进行了表征. 结果表明, 以三聚氰胺聚合物为配体制备的Fe-N/C具有更高的ORR催化活性. 在高温热处理过程中, 催化剂表面能形成更多的石墨N活性点, 是其ORR性能提高的重要原因.     

纳米孔炭负载 MnOx 催化剂上苯甲醇氧化反应性能

 以纳米孔炭 (NC) 为载体, 采用浸渍法制备了一系列 MnOx/NC 催化剂, 并用于以空气为氧源的苯甲醇液相氧化反应. 通过 X 射线衍射、X 射线光电子能谱、N2 吸附-脱附和 H2-程序升温还原等手段对催化剂进行了表征, 考察了催化剂中 Mn 负载量和焙烧温度, 以及反应条件等对反应性能的影响. 结果表明, 10%MnOx/NC 催化剂的活性较高, 反应 4 h 后苯甲醇转化率可达 80.4%; 明显高于活性炭负载的 MnOx 催化剂. 这主要归因于其表面存在大量高分散、且易于还原的 Mn 物种.     

石墨烯负载高活性Pd催化剂对乙醇的电催化氧化

以石墨粉为原料, 采用Hummers法液相氧化合成了氧化石墨(GO), 然后用化学一步还原制得石墨烯负载钯催化剂. X射线衍射(XRD)、透射电镜(TEM)表征表明, Pd在石墨烯载体上有较好的分散度, 粒径为3-5 nm. 电化学活性面积(EASA)、循环伏安(CV)、计时电流(CA)和计时电位(CP)等电化学测试表明, 与传统Pd/Vulcan XC-72相比, Pd/石墨烯催化剂对碱性介质中乙醇电催化氧化的催化活性有了很大的提高.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.