Synthesis and Luminescence Property of 4,4＇-Bis（2,2-di（4-fluorophenyl）vinyl）biphenyl for Organic Blue-Light-Emitting Diodes

The novel fluorinated distyrylarylene, 4,4＇-bis（2,2-di（4-fluorophenyl）vinyl）biphenyl （DFPVBi）, was synthesized and fully characterized. The structure was confirmed with IR, 1↑H NMR, 13↑C NMR, 19↑F NMR and MS analyses. Its electronic and photoluminescence properties were investigated by UV-Vis absorption, cyclic voltammetry and fluorescence spectroscopy. The energy levels of the highest occupied molecular orbital （HOMO） and the lowest unoccupied molecular orbital （LUMO） are --5.77 and --2.75 eV, respectively. The electroluminescence proper- ties of the organic light-emitting diode fabricated by DFPVBi were also studied. The device exhibits a pure blue emission peaked at 454 nm, which indicates a maximum luminance of 5872 cd/m ^2 at 14.2 V and a maximum current efficiency of 2.82 cd/A at 10V, respectively.     

Isophorone－based Fluorescent Dopant for Red Organic Electrolumi－nescence Device

lsophorone-based red fluorescent compound 3-(dicyanomethy-lene ) -5, 5-dimethyi- 1- [ 2- ( N-ethyl-3-carbazyi ) ethylene ] cyciohe-xene (DCDCC) was synthesized for use in organic Hght-emit-ring diodes (OLEDs). DCDCC was characterized by narrow emission in photoluminescence with full.width at half-maximum of only 50 nm in solution and in thin solid film of 70 nm width. devices with configuration of ITO/NPB/Alq3:DCDCC/Alq3/Mg: Ag were fabricated utilizing DCDCC as dopant emitter. An efficient red emission peaked at 612 nm was obtained for the device with 1% (wt.%) DCDCC in Alq3. The maximum luminance and current efficiency were as high as 3700 cd/m^2 at 14 V and 1.25 cd/A at 150 mA/cm^2, respective-ly.     

Synthesis and blue light-emitting properties of 4,4＇-bis（diphenylamino）-quinque（p-phenyl）s

An excellent organic blue light-emitting diode based on 4,4＇-bis（diphenylamino）-quinque（p-phenylene）s （OPP（5）-NPh） with a maximum luminance of up to 5000 cd/m^2 and a luminanous efficiency of 1.3 cd/A was reported. This diode was made by using a wide band-gap hole-blocking layer, F-TBB instead of PBD in the OLED devices. We attribute the good performance to the one trade-off involved in the use of F-TBB to obtain higher luminance is the increased turn-on voltages and slightly decreased device efficiencies.     

A purely organic D-π-A-π-D emitter with thermally activated delayed fluorescence and room temperature phosphorescence for near-white OLED

A purely organic D-π-A-π-D type emitter showing thermally activated delayed fluorescence(TADF) and room temperature phosphorescence(RTP) was designed and synthesized by utilizing the benzophenone as an acceptor and the N-phenyl-2-napthylamine as a donor moiety.It exhibits considerable TADF character in doped PMMA film and room temperature phosphorescence with a long lifetime of 74 ms at466 nm in solid state.The devices with the configuration of ITO/Mo_2 O_3(4 nm)/mCP(30 nm)/mCP:x wt%NP2 BP/TmTyPB(60 nm)/LiF(1.5 nm)/AI(100 nm) were prepared by vacuum evaporation to explore their electroluminescent performance.Intere stingly,the non-doped device has obtained near-white emission with a fluorescence emission peak at 475 nm and a phosphore scence emission peak at 563 nm having the CIE coordinate of(0.23,0.32) and the maximum external quantum efficiency of 1.09%.     

Blue electroluminescence of a novel Zn~(2+)–β-diketone complex with a carbazole moiety

In this letter, a novel zinc complex of Zn(ECTFBD)2 was synthesized by an environment-friendly grinding technique in high yield. Its structure was confirmed by1H NMR, MS and EA. HECTFBD is 1-(9-ethyl-9Hcarbazol-3-yl)-4,4,4-trifluorobutane-1,3-dione. Zn(ECTFBD)2-based light-emitting devices were fabricated. The architecture of the devices was ITO/PEDOT(40 nm)/100 wt% PVK: 40 wt% OXD-7: x wt% Zn(ECTFBD)2(85 nm)/CsF(1.5 nm)/Al(100 nm), where x = 1, 5, and 10(relative to the mass of PVK and OXD-7). The three devices displayed blue emissions with peaks at 450, 458, and 460 nm, respectively. A maximum luminous efficiency of 0.86 cd/A and a luminance of 228 cd/m2were achieved by the 1 wt% doped device. So, we demonstrated further that Zn2+–b-diketone complexes can be effectively severed as a class of new electroluminescent materials. In addition, the thermal stability of Zn(ECTFBD)2 was tested and the UV–vis and photoluminescent behaviors of Zn(ECTFBD)2 in CH2 Cl2 were investigated.     

Removal of methylene blue by tea wastages from the synthesis waste waters

The tea wastages could remove methylene blue（MB） as a cationic dye from waste water corresponding to second-order kinetic model.Thermodynamic studies showed that adsorption equilibrium constant（K_L） and maximum adsorption capacities(Q_max) were increased with increasing temperature.The removal efficiency of MB for Co 0.01 mmol/L at optimum conditions was about 85%. The maximum uptake capacity(Q_max) of methylene blue in a batch reactor was 0.328,0.542 and 0.659 mmol/g at 15,25 and 40℃, respectively.The enthalpy change（ΔH） and entropy change（ΔS） were 11.356 kJ/mol and 20.563 J/（mol K）,respectively.     

Synthesis and Soft Magnetic Properties of Mg-doped Ni Nanoparticles

Mg-doped Ni nanoparticles with good soft magnetic properties were prepared with the sol-gel method and were sintered at 400, 500, 600, and 900℃ in argon atmosphere, respectively. The structure and magnetic properties of the samples were studied by means of X-ray diffraction, TEM, and VSM magnetometers. X-Ray powder diffraction results show that Ni-Mg solid solution was formed with the single phase of face-centered cubic（fcc） structure. The particle size became larger with the increase of temperature. When the sintering temperature was 400 °C, the particle size was 6.3 nm, whereas it was 46.2 nm at 900 °C. Both the saturation magnetization（Ms） and the coercivity were enhanced with the increase of the particle size. The Ms values of the samples ranged from 18.965 to 46.766 emu/g and the coercivity ranged from 1051.3568 to 9145.0848 A/m.     

High-efficiency saturated red emission from binuclear cyclo-metalated platinum complex containing 5-(4-octyloxyphenyl)-1,3,4-oxadiazole-2-thiol ancillary ligand in PLED

A novel red-emitting binuclear platinum complex (dfppy)2Pt2(C8OXT)2 was synthesized and characterized,in which dfppy represents 2-(4’,6’-difluorophenyl)pyridinato unit and C8OXT is abbreviated for 5-(4-octyloxyphenyl)-1,3,4-oxadiazole-2-thiol as a bridging ancillary ligand.Its photophysical,electrochemical and electroluminescent characteristics were primarily studied.The made single-emissive-layer (SEL) polymer light-emitting devices using (dfppy)2Pt2(C8OXT)2 as emitter exhibited a saturated red emission peaked at 620nm.The best device performances were obtained in the device at 8wt% dopant concentration,with a maximum external quantum efficiency of 8.4%,a current efficiency of 4.2cd/A and brightness of 3228cd/m2.This work provides an effective approach to obtain high-efficiency red emission through construction of new binuclear platinum complex and its doped SEL devices.     

A novel positively thermo-sensitive hydrogel based on ethylenediaminetetraacetic dianhydride and piperazine: Design, synthesis and characterization

A new positively thermo-sensitive hydrogel was designed and synthesized by a condensation polymerization reaction of ethylenediaminetetraacetic dianhydride（EDTAD） and piperazine（PA） to give poly（ethylenediaminetetraacetic dianhydride-copiperazine） （PEP）.The obtained polymers’ structure was characterized by FTIR and ¹³C NMR.The backbone of the polymer linked by amide bond and abundant of carboxyl groups as pendant group could form strong intermolecular and intramolecular hydrogen bond at lower temperature and dissociate at higher temperature,resulting in the polymer with thermo-sensitivity.The aqueous solution of PEP at lower temperature（<20℃） showed micro-gel formation and transformed to transparent solution at higher temperature（>40℃）.Transition temperature shifted to higher value with the increasing of concentration.The hydrogel exhibited reversible phase transition and the transmittance change was not weakened by multiple temperature changes.     

First-order Derivative Spectrophotometry for the Determination of Vitamin C in Medicament

A novel method for the determination of vitamin C（Vc） is proposed in this article. After the reaction with Folin-Ciocalteau reagent at ambient temperature, Vc solution was scanned at 750--1100 nm, and its first-order derivative spectrum were obtained from the original spectrum. The values of derivative selected at 995 nm were used for determination. It was proved that Vc could quickly react with Folin-Ciocalteau reagent within 5 min and the product was quite stable for a long time. The conditions required for this method is not very complicated, its precision and accuracy are similar to those of the iodometric titration described in Chinese Pharmacopoeia, and the limit of detection is 0.312 μg/mL. The determination of the results of vitamin C tablet, pill, and injection demonstrates that this method has wide pharmaceutical applications.     

Efficient electroluminescence from new lanthanide (Eu3+, Sm3+) complexes

The syntheses, structures, and electroluminescent properties are described for two new lanthanide complexes Ln(HFNH)3phen [HFNH = 4,4,5,5,6,6,6-heptafluoro-1-(2-naphthyl)hexane-1,3-dione; phen = 1,10-phenanthroline; Ln = Eu3+ (1), Sm3+ (2)]. Both complexes exhibit bright photoluminescence at room temperature (RT) due to the characteristic emission of Eu3+ and Sm3+ ion. Several devices using the two complexes as emitters were fabricated. The performances of these devices are among the best reported for devices using europium complex and samarium complex as emitters. The device based on 1 with the structure ITO/TPD (50 nm)/1:CBP (10%, 40 nm)/BCP (20 nm)/AlQ (30 nm)/LiF (1 nm)/Al (200 nm) exhibits the maximum brightness of 957 cd/m2, current efficiency of 4.14 cd/A, and power efficiency of 2.28 lm/W with a pure red Eu3+ ion emission. Especially, at the high brightness of 200 cd/m2, the device of 1 still has a high current efficiency of 2.15 cd/A. The device of 2 with a three-layer structure of ITO/TPD (50 nm)/2 (50 nm)/BCP (20 nm)/LiF (1 nm)/Al (200 nm) gives the maximum brightness of 42 cd/m2, current efficiency of 0.18 cd/A. By the comparison of the electroluminescent properties of devices based on Eu(TTA3phen (TTA = 2-thenoyltrifluoroacteonate) and 1, we conclude that the polyfluoration on the alkyl group of the ligand and the introduction of the long conjugate naphthyl group into the ligand improve the efficiency of 1-doped devices, especially at high current densities.     

带烷氧基的苯基蒎烯吡啶铱配合物在聚合物电致发光器件中的应用研究

采用旋涂法将一组带烷氧基的苯基蒎烯吡啶铱(Ⅲ)配合物(Ir(RO-pppy)₃)磷光材料掺杂到PVK中,制作出了聚合物电致发光器件:ITO/PE-DOT:PSS(40 nm)/PVK_0.7:PBD_0.3:(x%.)Ir-complex(80 nm)/CsF(1.5 nm)/Mg:Ag(200 nm).实验结果表明,带有长烷氧基链配体的铱(Ⅲ)配合物能表现出更好的器件行为,当掺杂浓度为3.2%时,器件的最高发光效率达19.9 cd/A(7.8 lm/W,9.1V),CIE为(0.20,0.56);器件最大亮度为15700 cd/m²(8.4V).通过对这组铱(Ⅲ)配合物的光物理行为及电化学性能的研究,考察了主体材料与配合物之间的能级配置以及能量转移的机理.     

6-N,N-diphenylaminobenzofuran-derived pyran containing fluorescent dyes: a new class of high-brightness red-light-emitting dopants for OLED

Dye-doped organic light-emitting diode of ITO/alpha-NPB (70 nm)/Bebq(2)-1 (7 nm)/BCP (5 nm)/Bebq(2) (33 nm)/LiF (1 nm)/Al (150 nm) shows red electroluminescence with the efficiency of 2.9 cd/A at 100 cd/m(2) and maximum brightness of 62000 cd/m(2). The physical organic aspects of the current-induced fluorescent quenching effect are discussed. [structure: see text]     

High-performance blue electroluminescent devices based on 2-(4-biphenylyl)-5-(4-carbazole-9-yl)phenyl-1,3,4-oxadiazole

An electron transporting moiety (1,3,4-oxadiazole) and a hole transporting moiety (carbazole) were combined to create 2-(4-biphenylyl)-5-(4-carbazole-9-yl)phenyl-1,3,4-oxadiazole (CzOxa), a three layer device with a configuration of ITO/TPD(50 nm)/CzOxa(40 nm)/AlQ(40 nm)/Mg0.9Ag0.1(200 nm)/Ag(80 nm) which exhibited a blue emission peak at approximately 470 nm (x = 0.14, y = 0.19) with a maximum luminance of 26,200 cd m(-2) at a drive voltage of 15 V and a maximum luminous efficiency of 2.25 lm W(-1).     

Bright and monochromic red light-emitting electroluminescence devices based on a new multifunctional europium ternary complex

A novel europium(III) complex, tris(dibenzoylmethanato)(2-4'-triphenylamino)imidazo[4,5-f]1,10-phenanthroline)europium(III), Eu(DBM)3(TPIP), is synthesized. The light-emitting center, hole-transporting triphenylamine and electron-transporting phenanthroline fragments are integrated into one molecule. A single-layer device of ITO/Eu(DBM)3(TPIP) (60 nm)/Mg0.9Ag0.1/Ag exhibits Eu(III)-based pure red emission with a maximum brightness of 19 cd m(-2) at 13.5 V and 280 mA cm(-2), and an onset driving voltage of 8 V. A four-layer device of ITO/TPD (20 nm)/Eu(DBM)3(TPIP) (40 nm)/BCP (20 nm)/AlQ(40 nm)/Mg0.9Ag0.1/Ag gives a maximum Eu(III)-based pure red emitting luminance of 1305 cd m(-2) at 16 V and 255 mA cm(-2) with an onset driving voltage of 6 V; the maximum external quantum yield and luminous yield are estimated to be 0.85% and 1.44 lm W(-1), respectively, at 7.5 V and 0.25 mA cm(-2).     

高效磷光铱配合物的合成及电致发光性能研究

合成了一种含苯并噻唑结构配体的环金属化铱配合物(ffbi)₂Ir(acac)，(其中ffbi为1-(4-氟苄基)-2-(4-氟苯基)苯并咪唑，acac为乙酰丙酮)，并以其作为发光体, 制备了有机电致发光器件。结果表明该配合物具有强磷光发光特性，器件发绿色光。其中结构为TCTA(40 nm)/CBP∶Ir(6.3%，30 nm)/BCP(10 nm)/Alq(40 nm)的电致发光器件在12 V电压下最大发光亮度达41 499 cd·m^-2，在8 V电压下，最大外量子效率达5.7%。     

以N,N-四(间联苯基)-4,4-联苯二胺为正孔传送材料的有机电致发光器件(英文)

用新的路径成功地合成了N,N -四(间联苯基)-4,4 -联苯二胺(m TBPBz).以m TBPBz作为正孔传送材料,探讨了它在有机电致发光器件中的应用.制作了结构为玻璃基板／ITO阳极(130nm)／m TBPBz(40nm)／Alq(60nm)／LiF(0.5nm)／Al阴极(100nm)的器件.结果显示:该有机电致发光器件的绿色发光来源于Alq层.10V时,它的最大亮度为9486cd／m2.证明了m TBPBz具有正孔传送性能,可作为电致发光材料使用.     

含有载流子传输功能基团咔唑和噁二唑的有机铕(Ⅲ)配合物的合成及其发光性能

合成了一种含有载流子传输功能基团咔唑和噁二唑的有机铕(Ⅲ)配合物. 在研究了光致发光等性能的同时, 制备了结构为ITO/NPB(40 nm)/2.5%铕(Ⅲ)配合物: CBP(30 nm)/BCP(10 nm)/Alq3(30 nm)/LiF(1 nm)/Al(100 nm)的电致发光器件, 器件在612 nm处有半峰宽为4 nm的高纯度的明亮红光发射, 起亮电压约为6 V, 在17.3 V时达到最大亮度1778 cd/m2.     

Synthesis, structural characterization, and electrophosphorescent properties of rhenium(I) complexes containing carrier-transporting groups

Two novel diimine rhenium(I) carbonyl complexes with the formula [Re(CO)(3)(L)Br], where L = 1-(4-5'-phenyl-1,3,4-oxadiazolylbenzyl)-2-pyridinylbenzoimidazole (1) and 1-(4-carbazolylbutyl)-2-pyridinylbenzoimidazole (2), have been successfully synthesized and characterized by elemental analysis, (1)H NMR, and IR spectra. Their electrochemical, photophysical, and electroluminescent behaviors, along with the X-ray crystal structure analysis of 2, are also described. White electrophosphorescent devices were fabricated using 1 and 2 as emitters. The devices based on carbazole-containing (hole-transporting group) 2 with the structure ITO/m-MTDATA (30 nm)/NPB (20 nm)/2:CBP (8%, 30 nm)/Bphen (20 nm)/Alq(3) (20 nm)/LiF (0.8 nm)/Al (200 nm) exhibit Commission Internationale de L'Eclairage coordinates of x = 0.34, y = 0.33 with a maximum brightness of 2300 cd/m(2) at 580 mA/cm(2). When a brightness of 1500 cd/m(2) appears at 230 mA/cm(2), the devices based on 10 wt % 2 still possess 56% of the maximum efficiency which appeared at 2.7 mA/cm(2). These performances are among the best reported for devices using Re(I) complexes as emitters. By comparison of the electroluminescent properties of the devices based on 1 and 2, we conclude that the introduction of the carbazole group into the ligand improves the performance of 1-doped devices.