Amphiphilic polymethacrylates as crosslinked polymer precursors obtained by free‐radical monomethacrylate/dimethacrylate copolymerizations

As an extension of our work on the elucidation of the mechanism and control of 3‐dimensional network formation in the free‐radical crosslinking polymerization and copolymerization of multivinyl compounds with the aim to molecularly design vinyl‐type network polymers, novel amphiphilic polymers were prepared as crosslinked polymer precursors. Thus, benzyl methacrylate, a nonpolar monomer, was copolymerized radically with 5 mol % of triicosaethylene glycol dimethacrylate [CH₂C(CH₃)CO(OCH₂CH₂)₂₃OCOC(CH₃)CH₂], a polar monomer, in the presence of lauryl mercaptan as a chain transfer agent. The resulting prepolymers (i.e., vinyl‐type network‐polymer precursors or amphiphilic polymers) were characterized mainly by viscometry using t‐butylbenzene (t‐BB) and a t‐BB/MeOH (80/20) mixture as solvents. The viscosities in the t‐BB/MeOH (80/20) mixture were quite high compared with those in t‐BB, and completely reversed concentration dependencies were observed in the solvents. These are discussed by considering the difference in conformation and the shrinkage of polar, flexible polyoxyethylene units or the entanglement of nonpolar, rigid primary chains. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4396–4402, 2000     

Synthesis of poly(vinyl ether) polyols with pendant oxyethylene chains and properties of hydrophilic,thermo‐responsive polyurethanes prepared therefrom

Hydroxy‐terminated telechelic poly(vinyl ether)s with pendant oxyethylene chains were synthesized by the reaction of the CH₃CH(OCOCH₃)? O[CH₂]₄O? CH(OCOCH₃)CH₃/Et_1.5AlCl_1.5/THF‐based bifunctional living cationic polymers of 2‐methoxyethyl vinyl ether (MOVE), 2‐ethoxyethyl vinyl ether (EOVE), and 2‐(2‐methoxyethoxy)ethyl vinyl ether (MOEOVE) with water and the subsequent reduction of the aldehyde polymer terminals with NaBH₄. The obtained poly(vinyl ether) polyols were reacted with an equimolar amount of toluene diisocyanates [a mixture of 2,4‐ (80%) and 2,6‐ (20%) isomers] to give water‐soluble polyurethanes. The aqueous solutions of these polyurethanes caused thermally induced precipitation at a particular temperature depending on the sort of the thermosensitive poly(vinyl ether) segments containing oxyethylene side chains. These polyurethanes also function as polymeric surfactants, lowered the surface tension of their aqueous solutions. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1641–1648, 2010     

Synthesis of new amphiphilic and lypophilic polymer networks containing 2‐methyl‐ and 2‐nonyl‐2‐oxazoline by the macroinitiator method

New amphiphilic and lypophilic polymer networks were obtained by the copolymerization of 2‐methyl‐2‐oxazoline (MeOXA), and/or 2‐nonyl‐2‐oxazoline (NoOXA) and 2,2′‐tetramethylenebis(2‐oxazoline) (BisOXA), respectively, initiating the copolymerization by random copolymers of chloromethylstyrene and methyl methacrylate or of chloromethylstyrene and styrene (macroinitiator method). Potassium iodide was used as an activator agent and the reaction was carried out in benzonitrile at 110 °C. In general, the polymer gels were obtained with a yield of 62 to 88%. The networks were characterized by high‐resolution magic angle spinning (HRMAS) NMR spectroscopy and by its absorption of polar and nonpolar solvents. In the case of amphiphilic polymer networks, the absorption of solvents depends on the molar ratio of 2‐methyl‐ to 2‐nonyl‐2‐oxazoline inside the polymer network favoring the absorption of polar solvents with a higher content of 2‐methyl‐2‐oxazoline. These gels showed a maximal swelling degree of 13 mL of water, 20 mL of methanol, and 13 mL of chloroform, respectively, per g of polymer. The lypophilic polymer networks containing only 2‐nonyl‐2‐oxazoline showed a maximal swelling degree of 8 mL of toluene, 14 mL of chloroform, and 2 mL of methanol, respectively, per g of the lypophilic network. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 122–128, 2005     

The effect of polymer side chains on vapor sorption in polyacrylate and polymethacrylate solutions

The segment fraction Ψ₁ activity coefficients, a₁/Ψ₁, of solvents have been determined by the piezoelectric sorption method for 0.1 ≤ Ψ₁ ≤ 0.5 in binary solutions of chlorinated methanes [carbon tetrachloride (CCl₄), chloroform (CHCl₃), and dichloromethane (CH₂Cl₂)] with aromatic hydrocarbons (benzene and toluene) in poly(methyl methacrylate), poly(methyl acrylate), poly(ethyl methacrylate), and poly(n-butyl acrylate) at 23.5°C. The present results for toluene in PMMA agree with previously published values obtained by gas-liquid chromatography. For CCl₄ and the aromatic hydrocarbons, the polymer–solvent interaction parameter χ is positive and constant, while for the polar solvents (CHCl₃ and CH₂Cl₂), χ is negative and increases with increasing Ψ₁. The effect of the polymer side chains on vapor sorption in nonpolar and polar solvent systems is discussed in terms of the χ parameter.     

Synthesis and self‐assembly of amphiphilic dendronized conjugated polymers

Two kinds of amphiphilic dendronized conjugated polymers, polyfluorene (PF) and poly(binaphthyl‐alt‐fluorene) (PBF), were synthesized by Suzuki polycondensation of hydrophobic macromonomers with two nonpolar octyloxy chains and hydrophilic macromonomers with two polar oligo(ethylene oxide) chains. In these polymers, PF possesses a linear rod‐like backbone structure, and PBF adopts a folded rigid backbone structure. The different configurations in the conjugated main chains result in different supramolecular self‐assembly morphologies. The optical and thermal properties of PF and PBF were also studied. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 574–584, 2008     

Antifouling poly(vinylidene fluoride) ultrafiltration membranes containing amphiphilic comb polymer additive

An amphiphilic comb polymer consisting of poly(vinylidene fluoride‐co‐chlorotrifluoroethylene) [P(VDF‐co‐CTFE)] main chains and poly(oxyethylene methacrylate) (POEM) side chains was synthesized using direct initiation of the chlorine atoms in CTFE units through atom transfer radical polymerization, as confirmed by ¹H NMR and FTIR spectroscopy. The P(VDF‐co‐CTFE)‐g‐POEM comb polymer was introduced as an additive to prepare poly(vinylidene fluoride) antifouling ultrafiltration membranes. As the contents of comb polymer increased, the mechanical properties of membranes slightly decreased due to the decreased crystallinity of the membranes, as revealed by universal testing machine and X‐ray diffraction. However, water contact angle measurement and X‐ray photoelectron spectroscopy showed that the hydrophilic POEM segments spontaneously segregated on the membrane surfaces. As a result, the antifouling property of the membranes containing P(VDF‐co‐CTFE)‐g‐POEM comb polymer was considerably improved with a slight change of water flux. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 183–189, 2010     

Polymeric networks by the cationic crosslinking reaction of poly(allenyl ether)s having oligo(oxyethylene) moieties in the side chain

Cationic crosslinking reactions of poly(allenyl ether)s having oligo(oxyethylene) moieties prepared by the radical polymerization of the corresponding allenyl ethers were carried out under some varied reaction conditions. For instance, a crosslinked polymer was obtained in 82% yield by the treatment of poly(ethylene glycol methyl allenyl ether) ( 1a ) with 1.2 mol% of BF₃·OEt₂ ( 2 ) under high concentration in dichloromethane (46 wt %). The gels obtained showed good swelling properties in water, alcohols, and polar organic solvents such as dichloromethane. In particular, the degrees of swelling of these gels in aqueous sodium chloride (1M) were quite similar to those in ion-free water, indicating that these gels served as nonionic hydrogels. © 1994 John Wiley & Sons, Inc.     

Effects of polar group saturation on physical gelation of amphiphilic polymer solutions

Monte Carlo simulation on the basis of the comblike coarse grained nonpolar/polar (NP) model has been carried out to study the polar group saturation effect on physical gelation of amphiphilic polymer solutions. The effects of polar group saturation due to hydrogen bonding or ion bridging on the sol-gel phase diagram, microstructure of aggregates, and chain conformation of amphiphilic polymer solutions under four different solvent conditions to either the nonpolar backbone or the polar side chain in amphiphilic polymer chains have been investigated. It is found that an increase of polar group saturation results in a monotonically decreased critical concentration of gelation point, which can be qualitatively supported by the dynamic rheological measurements on pectin aqueous solutions. Furthermore, various solvent conditions to either the backbone or the side chain have significant impact on both chain conformation and microstructure of aggregates. When the solvent is repulsive to the nonpolar backbone but attractive to the polar side chain, the polymer chains are collapsed, and the gelation follows the mechanism of colloidal packing; at the other solvent conditions, the gelation follows the mechanism of random aggregation.     

A successive route to amphiphilic graft copolymers with a hydrophilic poly(3‐hydroxypropyl methacrylate) backbone and hydrophobic polystyrene side chains

A successive method for preparing novel amphiphilic graft copolymers with a hydrophilic backbone and hydrophobic side chains was developed. An anionic copolymerization of two bifunctional monomers, namely, allyl methacrylate (AMA) and a small amount of glycidyl methacrylate (GMA), was carried out in tetrahydrofuran (THF) with 1,1‐diphenylhexyllithium (DPHL) as the initiator in the presence of LiCl ([LiCl]/[DPHL]₀ = 2), at −50 °C. The copolymer poly(AMA‐co‐GMA) thus obtained possessed a controlled molecular weight and a narrow molecular weight distribution (M_w /M_n = 1.08–1.17). Without termination and polymer separation, a coupling reaction between the epoxy groups of this copolymer and anionic living polystyrene [poly(St)] at −40 °C generated a graft copolymer with a poly(AMA‐co‐GMA) backbone and poly(St) side chains. This graft copolymer was free of its precursors, and its molecular weight as well as its composition could be well controlled. To the completed coupling reaction solution, a THF solution of 9‐borabicyclo[3.3.1]nonane was added, and this was followed by the addition of sodium hydroxide and hydrogen peroxide. This hydroboration changed the AMA units of the backbone to 3‐hydroxypropyl methacrylate, and an amphiphilic graft copolymer with a hydrophilic poly(3‐hydroxypropyl methacrylate) backbone and hydrophobic poly(St) side chains was obtained. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1195–1202, 2000     

Synthesis of amphiphilic poly(para‐phenylene)s by Suzuki polycondensation

1,4‐Dibromobenzenes carrying nonpolar hexoxy and polar oligo(ethylene glycol) side chains were subjected to Suzuki polycondensation with a benzene‐1,4‐bisboronic acid ester to produce high‐molar‐mass poly(para‐phenylene)s. The molar masses were determined with size exclusion chromatography with conventional polystyrene and universal calibration. These novel amphiphilically equipped rigid‐rod polymers have the potential to segregate lengthwise into polar and nonpolar domains, a property that has only rarely been described, and promise to exhibit novel interesting supramolecular properties. The oligo(ethylene gylcol) side chains terminate with a silyl‐protected alcohol group, and its deprotection on the polymer was proven to proceed quantitatively. This not only led to a further polarity increase but allows us to attach even more polar (e.g., charged) units in future projects. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2879–2889, 2003     

Facile synthesis of amphiphilic gels by frontal free‐radical polymerization

We report a new facile strategy for quickly synthesizing poly(2‐hydroxyethyl acrylate‐co‐vinyl versatate) amphiphilic gels with excellent physicochemical properties by frontal free‐radical polymerization. The appropriate amounts of 2‐hydroxyethyl acrylate, vinyl versatate (VeoVa 9) and ammonium persulfate initiator were mixed together at ambient temperature in the presence of N‐methyl‐2‐pyrrolidone as the solvent medium. Frontal polymerization (FP) was initiated by heating the wall of the tube with a soldering iron. Once initiated, no further energy was required for the polymerization to occur. The dependence of the front velocity and front temperature on the initiator concentration was investigated. The front temperatures were between 132 and 157 °C, depending on the initiator concentration. The morphology, swelling rate, and swelling behavior of amphiphilic gels prepared via FP were comparatively investigated on the basis of scanning electron microscopy, water contact angle, and swelling measurements. Results show that the amphiphilic gels prepared via FP behave with good swelling capacity both in water and organic solvents. The FP can be exploited as an alternative means for synthesis of amphiphilic gels with additional advantages of fast and efficient way. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 823–831, 2010     

Swelling behavior and network structure of hydrogels synthesized using controlled UV‐initiated free radical polymerization

N‐vinyl‐2‐pyrrolidone (VP) and 2‐hydroxyethyl methacrylate (HEMA) copolymeric gels have been synthesized using UV‐initiated photopolymerization to understand their characteristic behavior for development as a bioengineering material, specifically for tissue expansion. The properties of the gels have been investigated by systematic variation of the monomer feed composition and initiator and crosslinker concentrations as well as UV irradiation intensity, which was controlled by various photomasks. The swelling kinetics and network characteristics for the various hydrogels were investigated through the observation of gel swelling behavior in saline solutions and compression modulus determination of the fully swollen hydrogels. The equilibrium swelling ratio (q_e) of the gels increased as expected with increasing VP content and decreasing crosslinker concentration. However, it was found that as the amount of initiator or UV intensity increased, unexpectedly q_e also increased, which indicates a network structure with decreasing effective crosslink density (ν_e) (or increasing average molecular weight between crosslinks (M_c)). Based on this anomalous swelling behavior and thermal analysis of the gels, a molecular structure is proposed consisting of increasing number of dangling chain ends within the polymer network. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1450–1462, 2008     

Macromolecular engineering of polylactones and polylactides. XXV. Synthesis and characterization of bioerodible amphiphilic networks and their use as controlled drug delivery systems

Well-defined α,ω-methacryloyl poly-ε-caprolactone (PCL) and poly(d,l )-lactide P(D,L)LA dimacromonomers have been synthesized by living ring-opening polymerization of the parent monomers initiated by diethylaluminum 2-hydroxyethylmethacrylate (Et₂Al O (CH₂)₂ O C(O) C(CH₃)CH₂) and terminated by reaction of the propagating Al alkoxide groups with methacryloyl chloride. These dimacromonomers have been copolymerized with a hydrophilic comonomer, i.e., 2-hydroxyethylmethacrylate, in bulk at 65°C by using benzoyl peroxide as a free-radical initiator. The swelling ability of the amphiphilic PHEMA/PCL or P(D,L)LA networks has been investigated in both aqueous and organic media. Effect of network composition and molecular weight of the dimacromonomer on the swelling kinetics and the equilibrium solvent uptake has been studied. Lipophilic dexamethasone acetate and the hydrophilic sodium phosphate counterpart have been incorporated into the amphiphilic gels and their release has been studied in relation to the gel characteristics. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2401–2411, 1999     

Solubility of carbon dioxide,methane, and propane in silicone polymers. Effect of polymer backbone chains

The solubility of carbon dioxide, methane, and propane in poly(dimethyl silmethylene) [(CH₃)₂SiCH₂]_x and poly(tetramethyl silhexylene siloxane) [(CH₃)₂Si (CH₂)₆Si (CH₃)₂O]_x was measured in the temperature range from 10.0 to 55.0°C and at elevated pressures. The present results are compared with similar measurements made with other silicone polymers. At a given temperature and pressure, the solubility of the above three gases is highest in poly(dimethyl siloxane) (Me₂SiO)_x. The gas solubility is decreased by either backbone-chain or side-chain substitutions of functional groups in (Me₂SiO)_x which increase the stiffness of the polymer chains and decrease the specific or fractional free volume of the polymers. It is conjectured that a decrease in the free volume of silicone polymers has a greater effect in decreasing the gas solubility than differences in gas/polymer interactions [with the exception of specific interactions (e.g., between CO₂ and polar groups in the polymer)]. © 1993 John Wiley & Sons, Inc.     

High elasticity,strength, and biocompatible amphiphilic hydrogel via click chemistry and ferric ion coordination

An amphiphilic interpenetrating polymer network hydrogel was designed and synthesized using click chemistry and ferric ion coordination. The first polymer network was formed through the reaction of azide‐modified PEG (N₃‐PEG_n‐N₃) and alkynyl‐pendant linear PPG derivatives ((PPG_m(C≡CH))_n) through click chemistry and mixed with poly(ethylene glycol‐dopamine) macromolecules. The second polymer network was formed through ferric ion coordination with poly(ethylene glycol‐dopamine). Interpenetrating polymer networks give the hydrogel unique amphiphilic properties and higher mechanical strength and thermal stability. Swelling ratio and degradation rate could be adjusted by controlling the ratio of poly(ethylene glycol‐dopamine) in the hydrogel network. Given that in vivo subcutaneous implantation revealed no infection and no obvious abnormalities, the hydrogel exhibits high biocompatibility. The feature indicates that these hydrogels have a promising application in the field of biomaterials and tissue engineering. Copyright © 2016 John Wiley & Sons, Ltd.     

Stimuli‐responsive reversible physical networks. I. Synthesis and physical network properties of amphiphilic block and random copolymers with long alkyl chains by living cationic polymerization

The living cationic polymerization of octadecyl vinyl ether (ODVE) was achieved with an 1‐(isobutoxy)ethyl acetate [CH₃CH(OiBu)OCOCH₃]/EtAlCl₂ initiating system in hexane in the presence of an added weak Lewis base at 30 °C. In contrast to conventional polymers, poly(octadecyl vinyl ether) underwent upper‐critical‐solution‐temperature‐type phase separation in various solvents, such as hexane, toluene, CH₂Cl₂, and tetrahydrofuran, because of the crystallization of octadecyl chains. Amphiphilic block and random copolymers with crystallizable substituents of ODVE and 2‐methoxyethyl vinyl ether (MOVE) were synthesized via living cationic polymerization under similar conditions. Aqueous solutions of the copolymers yielded physical gels upon cooling because of strong interactions between ODVE units, regardless of the copolymer structure. The product gels, however, exhibited different viscoelastic properties: A 20 wt % solution of a block copolymer (400/20 MOVE/ODVE) became a soft physical gel that behaved like a typical gel, whereas the corresponding random copolymer gave a transparent but stiff gel with a certain relaxation time. Differential scanning calorimetry analysis confirmed that the crystalline–amorphous transition of the octadecyl chains was a key step for inducing such physical gelation. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1155–1165, 2005     

Thermoplastic amphiphilic conetworks

Our main objective was the design, synthesis, characterization, and testing of a novel class of materials, thermoplastic amphiphilic conetworks (TP‐APCNs). A further objective was the evaluation of TP‐APCNs as biomaterials, for example, as immunoisolatory membranes in a bioartificial pancreas, or as extended‐wear soft contact lenses. The synthesis of the first TP‐APCNs was accomplished by blending an amphiphilic graft polymer, poly(dimethyl acryl amide)‐g‐polydimethylsiloxane (PDMAAm‐g‐PDMS), with a commercial PDMS‐containing polyurethane (PU). The common PDMS segments coalesce and form a single phase, whereas the hard/crystalline segments of the PU physically crosslink the blend. The properties of TP‐APCNs can be controlled by the graft/PU ratio and segment molecular weights. TP‐APCNs with cocontinuous hydrophilic and hydrophobic phases were prepared as demonstrated by swelling in water and n‐heptane. Depending on the blend ratio and molecular weights, optically clear water‐swollen TP‐APCNs with 0.5–4 MPa tensile strength, 70–280% elongation, together with 2–11 × 10^?7 cm²/s glucose permeability, and 1.2–8 × 10^?8 cm²/s insulin permeability were prepared. TP‐APCNs are processible by casting and molding. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 682–691, 2009     

Amphiphilic Comb‐Like Poly(oxyethylene) and Its Complexes with LiClO4: Synthesis and Mesomorphic Behavior

Summary: We prepared an amphiphilic, comb‐like poly(oxyethylene) containing decyl‐tri(oxyethylene) amphiphiles in the side chain using a polymer analogous reaction to obtain a novel nonionic amphiphilic polymeric system with high molecular weight. The amphiphilic comb‐like poly(oxyethylene) itself only showed a side‐chain crystalline phase below its melting temperature of −31 °C. When the polymer was mixed with lithium perchlorate, a smectic liquid‐crystalline phase appeared. The ordered phases of the polymer and the polymer mixture were studied by differential scanning calorimetry, polarized optical microscopy, and X‐ray diffraction.

POM image (200 X) of D3OTP1 at room temperature.     

Synthesis and characterization of a film‐forming,crosslinked, amphiphilic block copolymer of butadiene and acrylamide

An amphiphilic block copolymer of acrylamide and butadiene was synthesized by the polymerization of acrylamide in the presence of the crosslinker N,N′‐methylene bisacrylamide initiated by a hydroxyl‐terminated polybutadiene/V(V) macroredox initiator. The product had good film‐forming ability. It was characterized by IR and NMR spectroscopy, viscosity, swelling, and microhardness measurements, scanning electron micrography, and differential scanning calorimetry. A good film was obtained from the block copolymer with a greater proportion of butadiene; it had greater permeability for nonpolar solvents, and it was poorly permeable to water and other polar solvents. The film swelled in polar and nonpolar solvents and had almost the same capacity for the loading and release of hydrophilic and hydrophobic dyes. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3290–3303, 2006     

An organouranium coordination polymer containing infinite metal oxide chains

The title compound, catena‐poly[[[dioxouranium(VI)]‐bis(μ‐2‐hydroxybenzohydroxamato)] dihydrate], {[U(C₇H₆NO₃)₂O₂]·2H₂O}_n, is a uranyl coordination polymer based on the salicylhydroxamate ligand. The ligand acts both as a chelate, forming five‐membered rings, and as a bridge between two U atoms. The coordination around each U atom is a distorted hexagonal bipyramid. Infinite chains running along [001] are formed via bridging salicylhydroxamate O atoms. The chains have C₂ symmetry, with U atoms in special positions on twofold axes. The water molecules are not coordinated to the metal but crosslink, through hydrogen bonding, adjacent coordination polymer chains in the [110] and [10] directions.