Electrochemical Sensor for Sensitive Determination of Capsaicin Using Pd Decorated Reduced Graphene Oxide

In this work, the reduced graphene oxide functionalized with poly dimethyl diallyl ammonium chloride (PDDA) modified palladium nanoparticles (PDDA‐rGO/Pd) had been facile synthesized and used as the sensing layer for sensitive determination of capsaicin. The prepared composite was characterized by transmission electron microscopy, UV‐visible absorption spectroscopy. The image demonstrated that Pd nanoparticles were uniformly distributed on the graphene surface. The electrochemical properties of the prepared sensor were investigated by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The results showed that the nanocomposite exhibits attractive electrocatalytic activity towards the oxidation of capsaicin. This attributed to the synergistic action of the excellent properties of Pd nanoparticles and graphene nanosheets. Under optimized conditions, the electrochemical sensor possessed a dynamic linear range from 0.32 μM to 64 μM with a detection limit of 0.10 μM (S/N=3) for capsaicin detection. Moreover, the cost‐effective and simple fabrication procedure, good reproducibility and stability as well as acceptable accuracy for capsaicin determination in actual samples are also the main advantages of this method, which might have broad application in other amide alkaloid detection.     

Electroanalytical Determination of Paracetamol Using Pd Nanoparticles Deposited on Carboxylated Graphene Oxide Modified Glassy Carbon Electrode

The study presents a novel paracetamol (PA) sensor based on Pd nanoparticles (PdNPs) deposited on carboxylated graphene oxide (GO?COOH) and nafion (Nf) modified glassy carbon electrode (GCE). The morphologies of the as prepared composites were characterized using high resolution transmission electron microscopy (HRTEM), scanning electron microscopy (SEM), X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS), and fourier transform infrared spectroscopy (FTIR). The experimental results demonstrated that Nf/GO?COOPd displayed excellent electrocatalytic response to the oxidation PA. The linear range was 0.04–800 μM for PA with limit of detection of 0.012 μM and excellent sensitivity of 232.89 μA mM^?1 cm^?2. By considering the excellent performance of Nf/GO?COOPd composite such as wider linear range, lower detection, better selectivity, repeatability, reproducibility, and storage stability, the prepared composite, especially GO?COOH support, with satisfactory electrocatalytic properties was a promising material for the modification of electrode material in electrochemical sensor and biosensor field.     

A Sensitive and Selective Nitrite Detection in Water Using Graphene/Platinum Nanocomposite

A glassy carbon electrode modified with reduced graphene oxide and platinum nanocomposite film was developed simply by electrochemical method for the sensitive and selective detection of nitrite in water. The electrochemical reduction of graphene oxide (GO) efficiently eliminates oxygen‐containing functional groups. Pt nanoparticles were electrochemically and homogeneously deposited on the ErGO surface. Field emission scanning electron microscopy (FE‐SEM), Raman spectroscopy, attenuated total reflectance‐fourier transform infrared spectroscopy (ATR‐FTIR), electrochemical impedance spectroscopy (EIS), and cyclic voltammetry (CV) were used to examine the surface morphology and electrocatalytic properties of the Pt‐ErGO nanocomposite film‐modified electrode surface. The fabricated nitrite sensor showed good electrochemical performance with two linear ranges; one from 5 to 100 µM (R²=0.9995) and the other from 100 to 1000 µM (R²=0.9972) and a detection limit of 0.22 µM. The proposed sensor was successfully applied for the detection of nitrite in tap water samples which proves performance of the Pt‐ErGO nanocomposite films.     

Reduced Graphene Oxide Non‐covalent Functionalized with Zinc Tetra Phenyl Porphyrin Nanocomposite for Electrochemical Detection of Dopamine in Human Serum and Rat Brain Samples

We described the use of a nanocomposite consisting of reduced graphene oxide and zinc tetraphenylporphyrin (RGO/Zn‐TPP) for electrochemical sensing of dopamine (DA). The surface of RGO was homogeneously functionalized with Zn‐TPP via non‐covalent π‐π interaction. The nanocomposite was characterized by scanning electron microscopy, UV‐Vis spectrometry, nuclear magnetic resonance spectroscopy and electrochemical impedance spectroscopy. The electroanalysis behavior of the nanocomposite was studied by cyclic voltammetry and amperometry. The excellent electrocatalytic activity is found for oxidation of DA, best at working voltage of 0.214 V (vs. Ag/AgCl) and linear response range of 0.04–238.8 μM. The sensitivity and detection limit were of 0.665 μA µM^?1 cm^?2 and 3 nM, respectrively. The electrode is well reproducible, stable, and represents a viable platform for the analysis of DA in DA injection, human serum and rat brain sample.     

Construction of zinc selenide microspheres decorated with octadecylamine-functionalized reduced graphene oxide as an effective catalyst for the dual-mode detection of chloroquine phosphate

Zinc selenide microspheres were constructed using a simple hydrothermal technique at 180°C. It was ultrasonically treated with reduced graphene oxide modified with octadecylamine alkyl amine to form a hybrid nanocomposite. The optical, structural, and functional analysis by ultraviolet (UV) absorbance, X-ray diffraction, Fourier transform infrared spectroscopy, Raman spectroscopy, and X-ray photoelectron spectroscopy revealed the crystal nature of the microspheres and the successful formation of the nanocomposite. Field emission scanning electron microscopy and transmission electron microscopy were done to study the morphological properties of the material. It was further used to fabricate a dual-modality sensor using both electrochemical and absorbance techniques for the detection of antimalarial drug chloroquine phosphate (CQP), which was used for the treatment of COVID-19 (SARS-CoV-2) virus. For electrochemical detection, the sensor showed a very low detection limit of 1.43 nM at a linear working range of 0.199–250.06 μM and a high sensitivity of 43.912 μA/μM/cm². For UV-based detection, the sensor showed a very low detection limit of 6.88 nM at a linear working range of 0.045–7.324 μM. The sensor showed excellent analyte recovery rate for real-time analysis in biological as well as environmental samples. The results suggested that the sensor is effective for the detection of CQP with feasibility for future commercialization.     

A novel nitrite sensor based on graphene/polypyrrole/chitosan nanocomposite modified glassy carbon electrode

A novel nitrite sensor was fabricated based on a graphene/polypyrrole/chitosan nanocomposite film modified glassy carbon electrode. The nanocomposite film was characterized by scanning electron microscopy, Fourier transform infrared spectroscopy and Raman spectroscopy. The electron transfer behaviour of the modified electrodes was investigated in [Fe(CN)(6)](3-)/(4-) redox probe using cyclic voltammetry and electrochemical impedance spectroscopy. Differential pulse voltammetry and amperometry were used to study the electrochemical properties of the proposed sensor. Under optimum conditions, the sensor exhibited good reproducibility and stability for nitrite determination. Linear response was obtained in the range of 0.5-722 μM with a detection limit of 0.1 μM (S/N = 3) for nitrite determination.     

Reduced Graphene Oxide Nanocomposite Modified Electrodes for Sensitive Detection of Ciprofloxacin

The synthesis of novel nanocomposites with great sensing enhancement has played an important role in analytical chemistry, especially in the electrochemical detection of drug molecules. In this work, we report a wet chemical method for the preparation of a gold nanoparticle coated β‐cyclodextrin functionalized reduced graphene oxide nanocomposite. A number of different analytical techniques including ultraviolet‐visible spectroscopy, fourier transform infrared spectroscopy, scanning electron microscope and energy dispersive X‐ray spectroscopy were employed to characterize the as‐synthesized nanocomposite. With excellent electrocatalytic properties and high supramolecular recognition ability, the as‐synthesized nanocomposite was used to modify a glassy carbon electrode surface for the sensitive determination of ciprofloxacin using voltammetric technique. The current response of ciprofloxacin on the nanocomposite modified electrode was greatly enhanced compared to that on the bare and other modified electrodes. Using differential pulse voltammetry, the oxidation peak currents increased linearly with the ciprofloxacin concentrations in the range between 0.01 to 120 μM with a detection limit of 2.7 nM. The electrochemical testing results showed good stability and reproducibility. Therefore, the nanocomposite could be a potential candidate for the development of electrochemical sensors for sensitive and selective determination of ciprofloxacin or similar drugs in the future.     

A Novel Ternary Graphene‐based Nanocomposite Modified Electrode for Acetaminophen Detection

Herein, design and synthesis of ternary gold nanoparticles@ sulfourea‐functionalized reduced graphene oxide (Gold‐NPs@SFG) is reported. It involves interaction of ‘sulfourea’ to the graphene sheets via amidation of edged carboxyls of graphene oxide with N‐terminals of sulfourea followed by association of Gold‐NPs. Sulfourea not only reduced the graphene oxide but interestingly, it is functionalized to graphene sheets via carbodiimide covalent junctions, which gives it local effect to increase the active surface area and excellent electrocatalytic properties. The prepared nanocomposite was characterized with SEM, TEM, FTIR, Raman, XRD, XPS and CV. Gold‐NPs@SFG was found to be more efficient electrocatalyst for the electrocatalytic oxidation of a drug ‘Acetaminophen’ using differential pulse voltammetry and it was employed as a highly sensitive and selective electrochemical sensor for the quantification of ‘Acetaminophen’ with the detection limit of 0.09 μM in the wide linear range of 1.2 to 300 μM.     

Design and Development of Ultrafast Sinapic Acid Sensor Based on Electrochemically Nanotuned Gold Nanoparticles and Solvothermally Reduced Graphene Oxide

We report for the first time sinapic acid (SA) sensing based on nanocomposite comprising electrochemically tuned gold nanoparticles (EAuNPs) and solvothermally reduced graphene oxide (rGO). The synthesized EAuNPs, rGO, and EAuNPs‐rGO nanocomposite were characterized using X‐ray diffraction (XRD), transmission electron microscopy (TEM), selected area electron diffraction (SAED), particle size analysis, and Raman spectroscopy. A proof‐of‐concept electrochemical sensor for SA was developed based on synthesized EAuNPs‐rGO nanocomposite, which was characterized by electrochemical techniques such as cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The developed sensor detected SA with a linear dynamic range (LDR) between 20 μM and 200 μM and detection limit (DL) of 33.43 (±0.21) nM (RSD<3.32 %). To show the useful purpose of the sensor probe in clinical applications, SA was detected in human urine samples, which showed the percentage recovery between 82.6 % and 92.8 %. Interferences due to various molecules such as L‐cystine, glycine, alanine, serum albumin, uric acid, citric acid, ascorbic acid, and urea were tested. Long‐term stability of the sensor probe was examined, which was found to be stable up to 6 weeks. The sensor fabricated using EAuNPs‐rGO nanocomposite has many attractive features such as; simplicity, rapidity, and label‐free detection; hence, it could be a method of choice for SA detection in various matrices.     

The synthesis of graphene oxide covalently linked with nickel tetraamino phthalocyanine: A photoelectrochemical sensor for the analysis of rifampicin irradiated with blue light

In this article, the fabrication and characterization of a photoelectrochemical (PEC) rifampicin sensor based on graphene oxide grafted with Ni tetraamino phthalocyanine was described, which presents an excellent PEC activity, sensitivity, and material stability. The synthesized graphene oxide grafted with Ni tetraamino phthalocyanine was characterized using ultraviolet–visible (UV–vis), Fourier transform infrared (FTIR), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) analyses. Specifically, detection for rifampicin was based on the reduction of photocurrent caused by binding of the analyte to the sensing electrode surface. The fabricated sensor was characterized in a broad linear response range (0.025–71.3 μM) and with a low detection limit (2.5 nM), outperforming the previously reported sensors and thus being well suited for quality control and other applications, as confirmed by successful real‐life sample testing.     

Electrochemical Detection of Artemisinin Using Cobalt Sulphide/Reduced Graphene Oxide Nanocomposite

Solvothermally synthesized cobalt sulphide/reduced graphene oxide (CoS/rGO) was used to fabricate an electrochemical sensor for detection of artemisinin. Microscopic techniques were used to characterize CoS/rGO nanocomposite. The electrochemical sensor was fabricated by modifying the surface of glassy carbon electrode with CoS/rGO nanocomposite. [Fe(CN)6]^3−/4− was used as a mediator to aid oxidation of artemisinin. Differential pulse voltammetric technique was used for the detection of artemisinin. A linear range of 30–100 μM was used. Experimentally, a detection limit of 0.5 μM was obtained. Therefore, the developed sensor can be used for quality control of artemisinin.     

Electrochemical Sensor Based on a Novel Pt−Au Bimetallic Nanoclusters Decorated on Reduced Graphene Oxide for Sensitive Detection of Ofloxacin

Pt−Au nanoclusters decorated on the surface of reduced graphene oxide (rGO/Pt−Au) was facilely prepared by one‐pot electrochemical reduction. The morphology and composition of rGO/Pt−Au composites had been characterized by scanning electron microscopy (SEM) coupled with energy‐dispersive X‐ray spectrometry (EDX), fourier transform‐infrared spectroscopy (FT‐IR) and electrochemical methods. Ofloxacin is a member of synthetic quinolones which has been widely used for the treatment of common diseases in humans and animals. The performance of the rGO/Pt−Au nanocomposite toward the oxidation of ofloxacin was compared with the other similar nanostructures like rGO/Pt and rGO/Au. In the optimized conditions, two linear calibration curves were obtained, from 0.08 to 10 μM and 10 to 100 μM ofloxacin. A detection limit of 0.05 μM ofloxacin was observed at pH 5.7 for the GCE/rGO/Pt−Au. The proposed sensor was successfully applied to determine ofloxacin in tablets and human urine samples and the results were satisfactory.     

A non‐covalent functionalization of copper tetraphenylporphyrin/chemically reduced graphene oxide nanocomposite for the selective determination of dopamine

A non‐covalent functionalization based on a copper tetraphenylporphyrin/chemically reduced graphene oxide (Cu‐TPP/CRGO) nanocomposite is demonstrated for selective determination of dopamine (DA) in pharmaceutical and biological samples. A homogeneous electron‐rich environment can be created on the graphene surface by Cu‐TPP due to the π–π non‐covalent stacking interaction. The synthesized Cu‐TPP/CRGO nanocomposite was characterized using scanning electron microscopy NMR, ultraviolet–visible and electrochemical impedance spectroscopies. The electrocatalytic activity of DA was evaluated using cyclic voltammetry and differential pulse voltammetry. The oxidation peak current (I_pa) of DA increased linearly with increasing concentration of DA in the range 2–200 μM. The detection limit was calculated as 0.76 μM with a high sensitivity of 2.46 μA μM^?1 cm ^{? 2}. The practicality of the proposed DA sensor was evaluated in DA hydrochloride injection, human urine and saliva, and showed satisfactory recovery results for the detection of DA. In addition, the Cu‐TPP/CRGO nanocomposite‐modified electrode showed excellent stability, repeatability and reproducibility towards the detection of DA. Copyright © 2015 John Wiley & Sons, Ltd.     

Design and Development of a Non-Enzymatic Electrochemical Biosensor for the Detection of Glutathione

Glutathione (GSH-reduced form) is a tripeptide that plays a vital role as an antioxidant to remove xenobiotics in the human body and changes in GSH levels are a marker for the progression of various diseases. In this context, a highly sensitive non-enzymatic electrochemical biosensor for the detection of GSH has been developed using reduced graphene oxide Manganese oxide (rGMnO) nanocomposite as the nano-interface. Initially, graphene oxide was synthesized by Hummer's method and then thermally reduced in the presence of MnO₂ in a blast furnace to obtain rGMnO nanocomposite. The nanocomposite was characterized to validate its structure and morphological properties via Scanning electron microscopy (SEM), X-ray diffraction (XRD), Raman, and X-ray photoelectron spectroscopy (XPS). Cyclic voltammetry and amperometry studies showed that upon the addition of GSH, the Pt/rGMnO modified working electrode exhibited a linear response in the range of 1–100 μM at an input voltage of −0.62 V. The developed sensor was found to have a sensitivity of 0.3256 μA μM⁻¹ and LOD of 970 nM with a recovery of 92–104 % in real blood serum samples.     

Fabrication of Electrochemical Sensor Based on CeO2−SnO2 Nanocomposite Loaded on Pd Support for Determination of Nitrite at Trace Levels

Here, an electrochemical sensor based on CeO₂‐SnO₂/Pd was prepared and used for highly selective and sensitive determination of nitrite in some real samples. This nanocomposite was characterized by various methods like X‐ray photoelectron spectroscopy, X‐ray diffraction, energy dispersive spectroscopy, Fourier‐transform infrared spectroscopy, field emission scanning electron microscopy, and transmission electron microscopy. The electrochemical behavior of the sensor was evaluated by cyclic voltammetry. The results showed excellent catalytic property of the nanocomposite as a an electrocatalyst for nitrite oxidation. In the following, the experimental parameters affecting the analytical signal for nitrite were optimized. Under the optimal conditions, the limit of detection and sensitivity of the sensor were calculated as 0.10 μM and 652.95 μA.mM^?1.cm^?2, respectively. Also, the response of the sensor was linear in the range of 0.36 to 2200 μM of nitrite. Finally, some of the inherent features of the sensor such as repeatability, reproducibility and stability were examined after evaluation of the sensor selectivity in the presence of several interfering species.     

Electrochemical Determination of Hydrogen Peroxide Using a Glassy Carbon Electrode Modified with Three-Dimensional Copper Hydroxide Nanosupercages and Electrochemically Reduced Graphene Oxide

Three-dimensional copper hydroxide nanosupercages and electrochemically reduced graphene oxide were used to modify the glassy carbon electrode for the selective determination of hydrogen peroxide. The morphology and electrochemistry properties of copper hydroxide nanosupercage/electrochemically reduced graphene oxide/glassy carbon electrode were characterized using transmission electron microscopy, scanning electron microscopy, X-ray diffraction, Fourier transform infrared spectra, Raman spectra, cyclic voltammetry, and electrochemical impedance spectroscopy. The resulting copper hydroxide nanosupercage/electrochemically reduced graphene oxide/glassy carbon electrode showed favorable performance for the electrocatalytic reduction of hydrogen peroxide. The amperometric current–time curve of the electrochemical sensor exhibited a wide linear range from 0.5 to 1030?µM with a limit of detection of 0.23?µM at a signal-to-noise ratio of three. Moreover, the sensor provided favorable selectivity, reproducibility, and stability and was used for the determination of H₂O₂ in tap water.     

Functionalization of Reduced Graphene Oxide with β‐cyclodextrin Modified Palladium Nanoparticles for the Detection of Hydrazine in Environmental Water Samples

A sensitive and selective hydrazine sensor was developed by β‐cyclodextrin modified palladium nanoparticles decorated reduced graphene oxide (PdNPs‐β‐CD/rGO) nanocomposite. The PdNPs‐β‐CD/rGO hybrid material was prepared by simple electrochemical method. The hydrophobic cavity of β‐CD ineracts with palladium nanoparticles by hydrophobic interaction and further it is uniformly assembled on the rGO surface through hydrogen bond formation, which is clearly confirmed by FT‐IR, FESEM and TEM. The high electrocatalytic activity of hydrazine oxidation was observed at −0.05 V (vs. Ag/AgCl) on PdNPs‐β‐CD/rGO modified electrode; due to the excellent stabilization, high catalytic activity and large surface area of the PdNPs‐β‐CD/rGO composite. The PdNPs‐β‐CD/rGO fabricated hydrazine sensor exhibited an excellent analytical performance, including high sensitivity (1.95 μA μM⁻¹ cm⁻²), lower detection limit (28 nM) and a wide linear range (0.05 to 1600 μM). We also demonstrated that the PdNPs‐β‐CD/rGO nanocomposite modified electrode is a highly selective and sensitive sensor towards detection of hydrazine among the various interfering species. Hence, the proposed hydrazine sensor is able to determine hydrazine in different water samples.     

Electrocatalysis of Cu−MOF/Graphene Composite and its Sensing Application for Electrochemical Simultaneous Determination of Dopamine and Paracetamol

A nanocomposite of HKUST‐1 (MOF) and electroreduction graphene oxide (ERGO) is prepared and applied as an electrochemical sensor for the simultaneous determination of paracetamol and dopamine by means of one‐step electrodeposition. The MOF/ERGO composite displays excellent electrochemical catalytic activities towards the paracetamol and dopamine, which is attributed to the synergistic effect of big surface area, porosity and high electrocataytic activity of the MOF and good conductivity of ERGO. The modified electrode could be applied to determine simultaneously paracetamol and dopamine in biochemical samples with wide linear ranges (0.2 μM to 160 μM for paracetamol and 0.2 μM to 300 μM for dopamine) and low detection limits (0.016 μM for paracetamol and 0.013 μM for dopamine). Meanwhile, the proposed sensor still displays high sensitivity, good selectivity and excellent stability.     

One-pot green synthesis of Prussian blue nanocubes decorated reduced graphene oxide using mushroom extract for efficient 4-nitrophenol reduction

One-pot green approach to the synthesis of Prussian blue nanocubes/reduced graphene oxide (PBNCs/RGO) nanocomposite had been attempted. It was based on the extract of mushroom with K₃[Fe(CN)₆] and graphene oxide (GO) as precursors, where the reduction of GO and the deposition of PBNCs occurred simultaneously. The obtained nanocomposite was characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray diffraction (XRD), Raman spectroscopy and electrochemical techniques. With the introduction of β-cyclodextrin (β-CD), the β-CD/PBNCs/RGO system showed linear behavior in the range from 0.01 to 700 μM for 4-nitrophenol with a low detection limit of 2.34 nM (S/N = 3).     

Nickel and Tungsten Bimetallic Nanoparticles Modified Pencil Graphite Electrode: A High-performance Electrochemical Sensor for Detection of Endocrine Disruptor Bisphenol A

In this work, an economically viable, very low cost, indigenous, ubiquitously available electrochemical sensor based on bimetallic nickel and tungsten nanoparticles modified pencil graphite electrode (NiNP-WNP@PGE) was fabricated for the sensitive and selective detection of bisphenol A (BPA). The NiNP-WNP@PGE sensor was prepared by a facile electrochemical one step co-deposition method. The prepared nanocomposite was morphologically characterized by scanning electron microscopy (SEM), energy dispersive X-ray (EDX), X-ray diffraction (XRD), electrochemically by cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS). The proposed sensor displayed high electrocatalytic activity towards electro-oxidation of BPA with one irreversible peak. The fabricated sensor displayed a wide detection window between 0.025 μM and 250 μM with a limit of detection of 0.012 μM. PGE sensor was successfully engaged for the detection of BPA in bottled water, biological, and baby glass samples.