Copper-Catalyzed Regioselective Borocarbonylative Coupling of Unactivated Alkenes with Alkyl Halides: Synthesis of β-Boryl Ketones

The borocarbonylative coupling of unactivated alkenes with alkyl halides remains a challenge. In this communication, a Cu-catalyzed borocarbonylative coupling of unactivated alkenes with alkyl halides for the synthesis of β-boryl ketones has been developed. A broad range of β-boryl ketone derivatives was prepared in moderate to excellent yields with complete regioselectivity.     

Four‐Component Borocarbonylation of Vinylarenes Enabled by Cooperative Cu/Pd Catalysis: Access to β‐Boryl Ketones and β‐Boryl Vinyl Esters

We report here a general four‐component synthetic procedure for the preparation of β‐boryl ketones and β‐boryl vinyl esters. Joint catalyzed by palladium and copper catalysts, borocarbonylative reaction between vinylarenes, aryl halides/triflates, B₂Pin₂, and carbon monoxide proceed successfully. A variety of synthetically useful β‐boryl ketones were synthesized in good to high yields by using aryl iodides as the substrates. It is noteworthy that when aryl triflates were applied as the starting materials, β‐boryl vinyl esters were synthesized in a similar manner and with broad functional group tolerance. A rational mechanism for this reaction was also proposed.     

Rational Design of an Iron‐Based Catalyst for Suzuki–Miyaura Cross‐Couplings Involving Heteroaromatic Boronic Esters and Tertiary Alkyl Electrophiles

Suzuki–Miyaura cross‐coupling reactions between a variety of alkyl halides and unactivated aryl boronic esters using a rationally designed iron‐based catalyst supported by β‐diketiminate ligands are described. High catalyst activity resulted in a broad substrate scope that included tertiary alkyl halides and heteroaromatic boronic esters. Mechanistic experiments revealed that the iron‐based catalyst benefited from the propensity for β‐diketiminate ligands to support low‐coordinate and highly reducing iron amide intermediates, which are very efficient for effecting the transmetalation step required for the Suzuki–Miyaura cross‐coupling reaction.     

Computational Insight into Nickel‐Catalyzed Carbon–Carbon versus Carbon–Boron Coupling Reactions of Primary,Secondary, and Tertiary Alkyl Bromides

The nickel‐catalyzed alkyl–alkyl cross‐coupling (C?C bond formation) and borylation (C?B bond formation) of unactivated alkyl halides reported in the literature show completely opposite reactivity orders in the reactions of primary, secondary, and tertiary alkyl bromides. The proposed Ni^I/Ni^III catalytic cycles for these two types of bond‐formation reactions were studied computationally by means of DFT calculations at the B3LYP level. These calculations indicate that the rate‐determining step for alkyl–alkyl cross‐coupling is the reductive elimination step, whereas for borylation the rate is determined mainly by the atom‐transfer step. In borylation reactions, the boryl ligand involved has an empty p orbital, which strongly facilitates the reductive elimination step. The inability of unactivated tertiary alkyl halides to undergo alkyl–alkyl cross‐coupling is mainly due to the moderately high reductive elimination barrier.     

Palladium‐Catalyzed Heck‐Type Cross‐Couplings of Unactivated Alkyl Iodides

A palladium‐catalyzed, intermolecular Heck‐type coupling of alkyl iodides and alkenes is described. This process is successful with a variety of primary and secondary unactivated alkyl iodides as reaction partners, including those with hydrogen atoms in the β position. The mild catalytic conditions enable intermolecular C? C bond formations with a diverse set of alkyl iodides and alkenes, including substrates containing base‐ or nucleophile‐sensitive functionality.     

Intermolecular Photocatalyzed Heck‐like Coupling of Unactivated Alkyl Bromides by a Dinuclear Gold Complex

A practical protocol for a photocatalyzed alkyl‐Heck‐like reaction of unactivated alkyl bromides and different alkenes promoted by dinuclear gold photoredox catalysis in the presence of an inorganic base is reported. Primary, secondary, and tertiary unactivated alkyl bromides with β‐hydrogen can be applied. Esters, aldehydes, ketones, nitriles, alcohols, heterocycles, alkynes, alkenes, ethers, and halogen moieties are all well tolerated. In addition to 1,1‐diarylalkenes, silylenolethers and enamides can also be applied, which further increases the synthetic potential of the reaction. The mild reaction conditions, broad substrate scope, and an excellent functional‐group tolerance deliver an ideal tool for synthetic chemists that can even be used for challenging late‐stage modifications of complex natural products.     

Cobalt-catalyzed reductive coupling of saturated alkyl halides with activated alkenes

[reaction: see text] An efficient cobalt-catalyzed reductive coupling reaction of alkyl halides with electron-withdrawing alkenes (CH(2)=CR(1)EWG, EWG = electron-withdrawing group) in the presence of water and zinc powder in acetonitrile to give the corresponding Michael-type addition product (RCH(2)CR(1)EWG) was described. The methodology is versatile such that unactivated primary, secondary, and tertiary alkyl bromides and iodides and various conjugated alkenes including acrylates, acrylonitrile, methyl vinyl ketone, and vinyl sulfone all successfully participate in this coupling reaction. For the alkyl halides used in the reaction, the iodides generally gave better yields compared to those of the corresponding bromides. It is a unique method employing CoI(2)dppe, zinc, and alkyl halides, affording conjugate addition products in high yields. Mechanistically, the reaction appears to follow an oxidative addition driven route rather than the previously reported radical route.     

Enantioselective Dicarbofunctionalization of Unactivated Alkenes by Palladium‐Catalyzed Tandem Heck/Suzuki Coupling Reaction

A highly enantioselective dicarbofunctionalization of unactivated alkenes was implemented by a Pd‐catalyzed asymmetric tandem Heck/Suzuki coupling reaction. This reaction represents the first example of a highly enantioselective intramolecular cyclization/cross‐coupling of olefin‐tethered aryl halides with alkyl‐, alkenyl‐ or arylboronic acids, and provides rapid access to a number of chiral compounds, such as dihydrobenzofurans, indolines, chromanes, and indanes bearing a quaternary stereocenter, in good yields with excellent enantioselectivities. The practicality of this reaction was validated in the modification of biologically complex molecules such as peptides, piperitol, CB2 receptor agonists, etc. Moreover, the synthesis of two enantiomers can be easily realized by simple change in the order of the steps in the coupling sequence.     

Cobalt‐Catalyzed Enantioselective Synthesis of Chiral gem‐Bis(boryl)alkanes

We report an asymmetric synthesis of enantioenriched gem‐bis(boryl)alkanes in an enantioselective diborylation of 1,1‐disubstituted alkenes catalyzed by Co(acac)₂/(R)‐DM‐segphos. A range of activated and unactivated alkenes underwent this asymmetric diborylation in the presence of cyclooctene as a hydrogen acceptor, affording the corresponding gem‐bis(boryl)alkanes with high enantioselectivity. The synthetic utility of these chiral organoboronate compounds was demonstrated through several stereospecific derivatizations and the synthesis of sesquiterpene and sesquiterpenoid natural products.     

Synthesis of β‐Boryl‐α‐Aminosilanes by Copper‐Catalyzed Aminoboration of Vinylsilanes

A copper‐catalyzed regioselective and stereospecific aminoboration of vinylsilanes with bis(pinacolato)diboron (pinB‐Bpin) and hydroxylamines has been developed. In the presence of a CuCl/MeO‐dppbz catalyst, the boryl group and amino group are incorporated at the β position and α position, respectively, and the corresponding β‐boryl‐α‐aminosilanes are obtained with good diastereoselectivity. The boryl group is a good latent functional group, and subsequent manipulations provide a variety of β‐functionalized α‐aminosilanes of great potential in medicinal chemistry. Additionally, preliminary application to asymmetric catalysis is also described.     

Iron‐Catalyzed Regioselective Transfer Hydrogenative Couplings of Unactivated Aldehydes with Simple Alkenes

An FeBr₃‐catalyzed reductive coupling of various aldehydes with alkenes that proceeds through a direct hydride transfer pathway has been developed. With ⁱPrOH as the hydrogen donor under mild conditions, previously challenging coupling reactions of unactivated alkyl and aryl aldehydes with simple alkenes, such as styrene derivatives and α‐olefins, proceeded smoothly to furnish a diverse range of functionalized alcohols with complete linear regioselectivity.     

Copper‐Catalyzed Borocarbonylative Coupling of Internal Alkynes with Unactivated Alkyl Halides: Modular Synthesis of Tetrasubstituted β‐Borylenones

Reported is a general procedure to synthesize tetrasubstituted enones, which are borylated in the β‐position, using a copper‐catalyzed four‐component coupling reaction of simple chemical feedstocks: internal alkynes, alkyl halides, bis(pinacolato)diboron (B₂pin₂), and CO. A broad scope of highly functionalized β‐borylated enones, a largely unknown class of organic compounds, can be accessed efficiently using this method. The synthesis of all‐carbon tetrasubstituted enones was realized by employing the β‐borylated enone unit, without purification, in a Suzuki–Miyaura coupling. The utility of the method was further demonstrated by various transformations, including halogenation, oxidation, and protodeboration, of the corresponding reduced oxaborole species to provide densely substituted allylic alcohol and ketone products.     

Diastereo‐ and Enantioselective Synthesis of β‐Aminoboronate Esters by Copper(I)‐Catalyzed 1,2‐Addition of 1,1‐Bis[(pinacolato)boryl]alkanes to Imines

Reported herein is an efficient copper(I)‐catalytic system for the diastereo‐ and enantioselective 1,2‐addition of 1,1‐bis[(pinacolato)boryl]alkanes to protected imines to afford synthetically valuable enantioenriched β‐aminoboron compounds bearing contiguous stereogenic centers. The reaction exhibits a broad scope with respect to protected imines and 1,1‐bis[(pinacolato)boryl]alkanes, thus providing β‐aminoboronate esters with excellent diastereo‐ and enantioselectivity. The synthetic utility of the obtained β‐aminoboronate ester was also demonstrated.     

Visible‐Light Photocatalytic Radical Alkenylation of α‐Carbonyl Alkyl Bromides and Benzyl Bromides

Through the use of [Ru(bpy)₃Cl₂] (bpy=2,2′‐bipyridine) and [Ir(ppy)₃] (ppy=phenylpyridine) as photocatalysts, we have achieved the first example of visible‐light photocatalytic radical alkenylation of various α‐carbonyl alkyl bromides and benzyl bromides to furnish α‐vinyl carbonyls and allylbenzene derivatives, prominent structural elements of many bioactive molecules. Specifically, this transformation is regiospecific and can tolerate primary, secondary, and even tertiary alkyl halides that bear β‐hydrides, which can be challenging with traditional palladium‐catalyzed approaches. The key initiation step of this transformation is visible‐light‐induced single‐electron reduction of C? Br bonds to generate alkyl radical species promoted by photocatalysts. The following carbon? carbon bond‐forming step involves a radical addition step rather than a metal‐mediated process, thereby avoiding the undesired β‐hydride elimination side reaction. Moreover, we propose that the Ru and Ir photocatalysts play a dual role in the catalytic system: they absorb energy from the visible light to facilitate the reaction process and act as a medium of electron transfer to activate the alkyl halides more effectively. Overall, this photoredox catalysis method opens new synthetic opportunities for the efficient alkenylation of alkyl halides that contain β‐hydrides under mild conditions.     

Zinc‐Catalyzed Borylation of Primary,Secondary and Tertiary Alkyl Halides with Alkoxy Diboron Reagents at Room Temperature

A new catalytic system based on a Zn^II NHC precursor has been developed for the cross‐coupling reaction of alkyl halides with diboron reagents, which represents a novel use of a Group XII catalyst for C? X borylation. This approach gives borylations of unactivated primary, secondary, and tertiary alkyl halides at room temperature to furnish alkyl boronates, with good functional‐group compatibility, under mild conditions. Preliminary mechanistic investigations demonstrated that this borylation reaction seems to involve one‐electron processes.     

The first palladium-catalyzed Sonogashira coupling of unactivated secondary alkyl bromides

A palladium-carbene catalyzed Sonogashira coupling of unactivated alkyl bromides with alkyl substituted alkynes is reported. For the first time, unactivated secondary alkyl halides were successfully employed in Sonogashira reactions.     

Enantio‐ and Diastereoselective 1,2‐Additions to α‐Ketoesters with Diborylmethane and Substituted 1,1‐Diborylalkanes

The catalytic enantioselective synthesis of boronate‐substituted tertiary alcohols through additions of diborylmethane and substituted 1,1‐diborylalkanes to α‐ketoesters is reported. The reactions are catalyzed by readily available chiral phosphine/copper(I) complexes and produce β‐hydroxyboronates containing up to two contiguous stereogenic centers in up to 99:1 e.r. and greater than 20:1 d.r. The utility of the organoboron products is demonstrated through several chemoselective functionalizations. Evidence indicates the reactions occur via an enantioenriched α‐boryl‐copper‐alkyl intermediate.     

Mechanism of Ligand‐Controlled Regioselectivity‐Switchable Copper‐Catalyzed Alkylboration of Alkenes

Cu‐catalyzed alkylboration of alkenes with bis(pinacolato)diboron ((Bpin)₂) and alkyl halides provides a ligand‐controlled regioselectivity‐switchable method for the construction of complex boron‐containing compounds. Here, we employed DFT methods to elucidate the mechanistic details of this reaction and the origin of the different regioselectivity induced by Xantphos and Cy‐Xantphos. The calculation results reveal that the catalytic cycle mainly proceeds through the migratory insertion of alkenes on Cu‐Bpin complex, the oxidative addition of alkyl halides, and the reductive elimination of a C?C bond. Meanwhile, the rate‐ determining step is the oxidative addition of alkyl halides and the regioselectivity‐determining step is the migratory insertion of alkenes. The bulky cyclohexyl group of Cy‐Xantphos facilitates the approach of the substituents of alkenes to Bpin in the migratory insertion step and thus leads to the Markovnikov products. The less bulky phenyl group on Xantphos prefers keeping the substituents of alkenes away from the Bpin moiety in the migratory insertion step and thus results in anti‐Markovnikov products.     

Nickel‐Catalyzed Asymmetric Reductive 1,2‐Carboamination of Unactivated Alkenes

Starting from diverse alkene‐tethered aryl iodides and O‐benzoyl‐hydroxylamines, the enantioselective reductive cross‐electrophilic 1,2‐carboamination of unactivated alkenes was achieved using a chiral pyrox/nickel complex as the catalyst. This mild, modular, and practical protocol provides rapid access to a variety of β‐chiral amines with an enantioenriched aryl‐substituted quaternary carbon center in good yields and with excellent enantioselectivities. This process reveals a complementary regioselectivity when compared to Pd and Cu catalysis.     

On the Synthesis,Characterization and Reactivity of N‐Heteroaryl–Boryl Radicals,a New Radical Class Based on Five‐Membered Ring Ligands

The synthesis and physical characterization of a new class of N‐heterocycle–boryl radicals is presented, based on five membered ring ligands with a N(sp²) complexation site. These pyrazole–boranes and pyrazaboles exhibit a low bond dissociation energy (BDE; B?H) and accordingly excellent hydrogen transfer properties. Most importantly, a high modulation of the BDE(B?H) by the fine tuning of the N‐heterocyclic ligand was obtained in this series and could be correlated with the spin density on the boron atom of the corresponding radical. The reactivity of the latter for small molecule chemistry has been studied through the determination of several reaction rate constants corresponding to addition to alkenes and alkynes, addition to O₂, oxidation by iodonium salts and halogen abstraction from alkyl halides. Two selected applications of N‐heterocycle–boryl radicals are also proposed herein, for radical polymerization and for radical dehalogenation reactions.