室温离子液体协同增敏浊点萃取分光光度法测定痕量镉

本文建立了离子液体协同增敏浊点萃取-紫外可见分光光度法测定痕量镉的方法。离子液体和二硫代氨基甲酸钠(DDTC)分别用作增敏剂和络合剂,离子液体的加入能使测定镉的方法灵敏度提高3.2倍。非离子表面活性剂TritonX-100用作提取剂,当样品体系的温度高于TritonX-100的浊点温度时,镉与DDCT形成的络合物被萃取到TritonX-100中,经相分离紫外可见分光光度计检测。考查了离子液体,DDTC和TritonX-100的浓度、溶液酸度、干扰离子等实验条件对浊点萃取效率的影响。在最优化的实验条件下,测量镉的线性范围为1～100 ng·mL-1,方法的检出限为0.1 ng·mL-1,相对标准偏差RSD为4.3%,富集系数为96。该方法应用于测定于水样中的痕量镉具有满意的效果。     

浊点萃取-分光光度法测定痕量NO2-

建立了浊点萃取-分光光度法测定痕量NO2-根的方法.以对氨基苯磺酸和α-萘胺为络合剂,非离子型表面活性剂TritonX-100为萃取剂,富集、分离水样中痕量NO2-,采用可见吸收光谱法进行检测.研究了溶液的酸度、试剂用量、平衡时间、平衡温度、干扰离子对浊点萃取效果的影响,并得到最佳实验条件:5％的TritonX-100用量2.0mL、平衡温度85℃、平衡时间10min、对氨基苯磺酸和α-萘胺均为0.3mL、0.1mol/LH2SO4溶液0.5mL.在最佳实验条件下,对氨基苯磺酸、α-萘胺和NO2-生成的络合物被萃取到TritonX-100表面活性剂相并与水相分开.该方法适用于环境水样中痕量NO2-的测定.     

浊点萃取-荧光光度法测定苯酚

基于非离子表面活性剂TritonX-100,以浊点萃取结合荧光光度法测定水中的苯酚,考察影响浊点萃取的各种因素。最佳实验条件为：pH=3.0的磷酸氢二钠-磷酸二氢钾缓冲溶液中,5%的TritonX-100用量2.0mL、平衡温度82℃、平衡时间8min。在此条件下,苯酚被萃取到TritonX-100表面活性剂相与水相分开。     

浊点萃取-火焰原子吸收光谱法测定食品和饮料中的痕量铜

研究了基于非离子表面活性剂TritonX-114和螯合剂二乙基氨基二硫代甲酸钠(DDTC)的浊点萃取-火焰原子吸收光谱法测定痕量铜的分析方法.考察了影响浊点萃取效率的参数,包括pH值、DDTC浓度、TritonX-114用量、平衡温度及时间等.在优化条件下,本法的检出限(3σ)为1.55μg/L,相对标准偏差RSD为3.4%(n=7,c=100μg/L),线性范围为0～250μg/L.将该法应用于茶叶标准样品(GBW07605)、奶粉和矿泉水等样品中痕量铜的测定,其回收率在96.7%～113.5%之间.     

正辛醇诱导低温浊点萃取-火焰原子吸收法测定环境样品中痕量铟

利用适量正辛醇可以显著降低非离子表面活性剂Triton X-100浊点的特性,以8-羟基喹啉为螯合试剂,建立了一种醇诱导低温浊点萃取-火焰原子吸收测定痕量铟的新方法。探讨了不同因素对萃取效率的影响。研究表明在加入1.5 mL正辛醇后,Triton X-100的浊点可以降至35℃。最佳萃取条件为:pH 6.0,0.01 mol/L 8-羟基喹啉溶液1.0 mL,体积分数15%Triton X-100溶液0.8 mL,平衡温度40℃,平衡时间30 min。在最佳条件下,铟的富集倍数为42,检出限为0.56μg/L。利用该方法对标准水系沉积物和环境样品中的铟进行了萃取富集与测定。     

浊点萃取-火焰原子吸收光谱法测定荔枝和桂圆肉中痕量铜

建立以二乙基二硫代氨基甲酸钠(DDT℃)为配位剂、TritonX-114为表面活性剂的浊点萃取-火焰原子吸收测定荔枝和桂圆肉中痕量铜的方法.研究了溶液pH值、配位剂类型与浓度、表面活性剂类型与浓度、平衡温度和平衡时间等实验条件对浊点萃取效率的影响.在最优的实验条件下,该方法测定铜的检出限为0.8μg/L,相对于传统火焰...     

浊点萃取-石墨炉原子吸收光谱法测定食品包装材料中锑

以吡咯烷二硫代氨基甲酸铵(APDC)为络合剂,在pH5.0乙酸-乙酸钠缓冲溶液中,痕量锑(Ⅲ)与APDC生成络合物,加入表面活性剂TritonX-114用浊点萃取分离富集样品中痕量锑。分取部分表面活性剂相用0.1mol·L-1硝酸甲醇溶液溶解,所得溶液直接用石墨炉原子吸收光谱法进行测定。对影响浊点萃取的因素和共存离子的干扰等进行了试验并予以优化。方法的检出限(3σ/k)为0.37μg.L-1。应用所提出的方法测定了食品包装材料陶瓷样品中锑的含量,并用标准加入法进行方法的回收试验,测得回收率为99.3%。     

浊点萃取-热喷雾火焰炉原子吸收光谱法测定水中痕量锌(Ⅱ)

建立了以吡咯烷二硫代氨基甲酸铵(APDC)为络合剂、TritonX-100为表面活性剂的浊点萃取-热喷雾火焰原子吸收光谱法测定水样中痕量锌的方法.考查了APDC的浓度、溶液酸度、表面活性剂浓度、加热时间、水浴温度、干扰离子等实验条件对浊点萃取效率的影响.在最优化的实验条件下.方法的检出限为0.1 ng/mL,RsD为4...     

浊点萃取-火焰原子吸收光谱法测定淡水鱼中痕量铅

采用以双硫腙为络合剂、Triton X-100为表面活性剂的新型浊点萃取体系富集淡水鱼中的痕量铅,并用火焰原子吸收光谱法对其进行测定。探讨了溶液pH、表面活性剂浓度、络合剂用量、平衡温度、平衡时间等对浊点萃取及测定灵敏度的影响,优化了实验条件。在最佳条件下测得铅的检出限为0.090μg/L,校准曲线相关系数为0.9999。该方法已用于淡水鱼中痕量铅的测定。     

浊点萃取-石墨炉原子吸收光谱法测定环境样品中的痕量镉

研究了浊点萃取-石墨炉原子吸收光谱法(GFAAS)测定痕量镉的新方法,利用表面活性剂Triton X-100和络合剂1-(2-吡啶偶氮)-2-萘酚(PAN)对镉进行浊点萃取。详细探讨了影响浊点萃取及测定灵敏度的因素。优化条件为:0.25 mL 30%NaC l,pH 8.5,0.50 mL、4.0×10-4mol/L PAN,0.2 mL 1.0%TritonX-100。在最佳条件下,镉的富集倍率为50倍,检出限为5.9 ng/L,RSD为2.1%。该方法用于环境样中痕量镉的富集和测定,结果令人满意。     

Design of rapidly synergistic cloud point extraction of ultra-trace lead combined with flame atomic absorption spectrometry determination

In this work, traditional cloud point extraction (CPE) pattern was changed and improved by the proposed rapidly synergistic CPE. Using octanol as cloud point revulsant and synergic reagent, non-ionic surfactant Triton X-114 (TX-114) accomplished room temperature extraction rapidly without heating in water bath. The improved extraction was named as rapidly synergistic cloud point extraction (RS-CPE). Compared with traditional CPE, RS-CPE was accomplished in 1 min with considerably high extraction efficiency. The improved CPE pattern was coupled with flame atomic absorption spectrometry (FAAS) for the extraction and detection of trace lead in real and certified water samples with satisfactory analytical results. The proposed method greatly improved the sensitivity of FAAS for the determination of lead. Under the optimal conditions, the limit of detection (LOD) for lead was 4.3 μg/L, with enhancement factor (EF) of 39. Factors influencing RS-CPE efficiency, such as concentrations of surfactant TX-114 and octanol, concentration of chelating agent, pH, conditions of phase separation, environmental temperature, salt effect and instrumental conditions, were studied systematically.     

Investigation of analytical performance for rapidly synergistic cloud point extraction of trace amounts of copper combined with spectrophotometric determination

In this work, an improved preconcentration method named as rapidly synergistic cloud point extraction (RS-CPE) was established for copper preconcentration and determination. Non-ionic surfactant Triton X-100 (TX-100) was used as extractant. Octanol worked as cloud point revulsant and synergic reagent, which successfully decreased the cloud point temperature (CPT) of TX-100 to realize the room temperature (about 20°C) CPE without heating. The established RS-CPE pretreatment was simple, rapid and effective. Compared with traditional CPE (about 40 min for heating, incubation and cooling), the extraction time of the proposed method was very short (1 min). The improved extraction technique RS-CPE was combined with traditional spectrophotometer to improve the analytical performance and expand the application of spectrophotometric determination. The influence factors relevant to RS-CPE, such as concentrations of TX-100 and octanol, concentration of chelating agent, pH, conditions of phase separation, salt effect, environmental temperature and instrumental conditions, were studied in detail. Under the optimal conditions, the limit of detection (LOD) for copper was 0.4 μg L(-1), with sensitivity enhancement factor (EF) of 18. The proposed method was applied to the determination of trace copper in real samples and certified samples with satisfactory analytical results.     

Cloud Point Extraction Preconcentration of Trace Cadmium as 1-Phenyl-3-methyl-4-benzoyl-5-pyrazolone Complex and Determination by Flame Atomic Absorption Spectrometry

A new method for the determination of trace cadmium in water samples by flame atomic absorption spectrometry (FAAS) after cloud point extraction (CPE) is proposed. The method is based on the complexation of Cd with 1-phenyl-3-methyl-4-benzoyl-5-pyrazolone (PMBP) in the presence of non-ionic micelles of Triton X-100. The effect of experimental conditions such as pH, concentration of chelating agent and surfactant, equilibration temperature and time on cloud point extraction was studied. Under the optimum conditions, the detection limits are 0.64 ng mL^±1 with relative standard deviations (RSDs) of 2.1% (n = 10). The proposed method was applied to the determination of trace cadmium in water samples with satisfactory results.     

Uranium micelle-mediated extraction in acetate medium: factorial design optimization

A micelle-mediated extraction (CPE) procedure has been developed to remove trace amounts of uranium from wastewater using a non-ionic surfactant (Triton (X-100)) and lipophilic chelating extracting agent (D2EHPA) in acetate medium. The methodology used is based on the formation of metal complexes soluble in a micellar phase of a non-ionic surfactant. The uranyl ions complexes are then extracted into the surfactant-rich phase at a ambient temperature. The effects of different operating parameters such as the concentrations of Triton (X-100), D2EHPA and metal ions, temperature, sodium acetate rate and pH on the cloud point extraction of uranyl ions were studied in details and a set of optimum conditions were obtained. The results showed, without contribution of energy (ambient temperature), that up to 1000?ppm of uranyl ions can quantitatively be removed (>97?%) in a single CPE extraction using optimum conditions.     

Development of a cloud point extraction and preconcentration method for determination of trace aluminum in mineral waters by FAAS

A cloud point extraction (CPE) method has been developed for the preconcentration of trace aluminum prior to its determination by flame atomic absorption spectrometry (FAAS). The CPE method is based on the complex of Al(III) with Xylidyl Blue (XB) and then entrapped in non-ionic surfactant Triton X-114. The main factors affecting CPE efficiency, such as pH of sample solution, concentration of XB and Triton X-114, equilibration temperature and time, were investigated in detail. An enrichment factor of 50 was obtained for the preconcentration of Al(III) with 50 mL solution. Under the optimal conditions, the detection limit of this method for Al(III) is 1.43 μg L^− 1, and the relative standard deviation is 2.7% at determination of 100 μg L^− 1 Al(III). The proposed method has been applied for determination of trace amount of aluminum in mineral water samples with satisfactory results. Also, the proposed method was applied to the certified reference materials. The results obtained were in good agreement with certified values.     

浊点萃取电热原子吸收光谱法测定水中痕量铊

采用吡咯烷基二硫代氨基甲酸铵(APDC)为螯合剂,Triton X-114作为表面活性剂,建立了浊点萃取预富集电热原子吸收光谱法测定水中痕量铊的方法。在优化的实验条件下,方法的检出限可达0.07μg/L,相对标准偏差为3.6%(4μg/L,n=7),加标回收率为93%~106%,富集倍率为31。该方法成功应用于自来水和河水中痕量铊的测定。     

Cloud point extraction and graphite furnace atomic absorption spectrometry determination of manganese(II) and iron(III) in water samples

Cloud point extraction (CPE) was applied as a preconcentration step prior to graphite furnace atomic absorption spectrometry (GFAAS) determination of manganese(II) and iron(III) in water samples. After complexation with 1-phenyl-3-methyl-4-benzoyl-5-pyrazolone (PMBP), the analytes could be quantitatively extracted to the phase rich in the surfactant p-octylpolyethyleneglycolphenylether (Triton X-100) and be concentrated, then determined by GFAAS. The parameters affecting the extraction efficiency, such as solution pH, concentration of PMBP and Triton X-100, equilibration temperature and time, were investigated in detail. Under the optimum conditions, preconcentration of 10 ml of sample solution permitted the detection of 0.02 ng ml(-1) of Mn(II) and 0.08 ng ml(-1) of Fe(III) with enrichment factors of 31 and 25 for Mn(II) and Fe(III), respectively. The proposed method was applied to determination of trace manganese(II) and iron(III) in water samples with satisfactory results.     

Cloud point extraction of aloe anthraquinones based on non-ionic surfactant aqueous two-phase system

Non-ionic surfactant-based aqueous two-phase system had been investigated to extract aloe anthraquinones. It had the advantage of using a single auxiliary chemical to induce phase separation above cloud point at a low concentration. Non-ionic surfactant Triton X-114 was chosen for its excellent phase-separating ability and low cloud point. The main factors affecting the cloud point extraction were discussed such as equilibrium temperature and time, concentrations of surfactant and inorganic electrolytes, pH, etc. Under the optimised conditions, the highest extraction yield 96.93% was obtained. The reverse extraction of anthraquinones from surfactant-rich phase was achieved with a recovery of 70.35% by adjusting pH. Compared with conventional purification methods, this CPE technique can be completed in one operation; besides, it is a low-cost method and an environment friendly one.     

浊点萃取-火焰原子吸收光谱法测定样品中的痕量钴

研究了基于表面活性剂Triton X-114和络合剂吡咯烷二硫代氨基甲酸铵（APDC）浊点萃取钴的样品前处理方法.优化了浊点萃取条件参数,包括pH值、Triton X-114用量、APDC浓度、平衡温度及时间等,建立了浊点萃取-火焰原子吸收光谱法测定痕量钴的方法.该法的检测限（3σ）为2.6μg/L,相对标准偏差RSD为6.2%（n=7,c=200μg/L）.该法成功地应用于海带、维生素B12注射液等样品中钴的测定.