A connection between the binding properties of imprinted and nonimprinted polymers: a change of perspective in molecular imprinting

In the current paradigm for molecular imprinting, the imprinted binding sites exist as a consequence of the polymerization process around templates, and the properties of nonimprinted polymers (NIPs) have largely been overlooked. Thus, nothing can be affirmed a priori concerning the binding properties of NIPs. We propose an alternative view where the imprinting effect is due to the presence of a template molecule that enhances the pre-existing binding properties of a polymer. If a NIP shows no binding properties toward a target molecule, the corresponding imprinted polymer (MIP) will show a weak imprinting effect. On the other hand, if a NIP shows binding properties toward a target molecule, the corresponding MIP will show a significant imprinting effect. To verify this hypothesis, we prepared a 96-member combinatorial polymeric library in the absence of any template molecule. This library was screened for several potential ligands, and with no exceptions, the composition of the best-binding NIP produced a MIP with excellent binding properties, whereas a low-binding NIP formulation produced a MIP with comparable low binding. To validate these results, the binding properties toward naproxen and ibuprofen were measured for two combinatorial libraries of polymers prepared in the presence (MIP library) and the absence (NIP library) of the template molecule. The experiment's results showed a correlation between the apparent affinity constants measured for the NIP and MIP libraries, confirming the proposed hypothesis. Moreover, for closely related molecules, it was shown that binding selectivity is an emergent property derived from the imprinting process and not a property of NIPs.     

Probing cavity versus surface preference of fluorescent template molecules in molecularly imprinted polystyrene microspheres

Functional polystyrene (PS) crosslinked microbeads were developed by dispersion polymerization as fluorescent molecularly imprinted polymers (MIPs) having cavities with specific recognition sites. The functional azobenzene molecule modified with pyridine was self‐assembled with Pyrenebutyric acid (template molecules), and introduced during the second stage of dispersion polymerization of polystyrene. The template molecule was removed from MIP by Soxhlet using acetonitrile as solvent. Non imprinted polymer (NIP) having no template was also synthesized for comparative study. Fluorescence spectroscopy could be used as a tool to derive insight into the location of the template molecules on the MIP or NIP. The template molecules were adsorbed on the surface of the NIPs during binding studies, which was evidenced from the pyrene excimeric emission observed at 440 nm. The template binding efficiency of the NIPs were much lower compared to MIPs. Pyrene emission from MIP upon rebinding showed typical monomeric emission in the 375–395 nm range, confirming its location in isolated cavities. In rebinding studies of the template molecules, the MIPs selectively took up the template for which the cavity was designed, which demonstrated their selectivity towards template molecules. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1558–1565     

苏丹红Ⅰ分子印迹聚合物制备及吸附性能研究

以苏丹红Ⅰ为模板分子,α-甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,偶氮二异丁腈为引发剂,在氯仿中采用沉淀聚合法制备了分子印迹聚合物.聚合物的平衡结合试验表明:模板分子/功能单体/交联剂的摩尔比为1:4:16时所得的印迹聚合物对苏丹红Ⅰ吸附量最大;合成时溶剂和引发剂用量对聚合物吸附量有很大影响;印迹和非印迹聚合物对苏丹红Ⅰ的平衡吸附量分别为49.17μmol·g-1和22.6μmol·g-1,选择性结合试验中印迹聚合物对苏丹红Ⅰ和苏丹红Ⅲ的吸附量分别为26.8μmol·g-1和5.26μmol·g-1,说明印迹聚合物对苏丹红Ⅰ具有特异性吸附;Scatchard分析表明该印迹聚合物具有两类结合位点.     

橄榄醇分子印迹聚合物的制备及评价(英文)

以橄榄醇为模板分子,α-甲基丙烯酸(MAA)为功能单体,乙二醇二甲基丙烯酸酯(EDMA)为交联剂,甲苯和十二醇为溶剂,通过本体聚合法制备了橄榄醇分子印迹聚合物。利用平衡结合实验、扫描电镜(SEM)及红外光谱(FTIR)对分子印迹聚合物(MIP)进行了表征,并用该聚合物进行了加标麦麸中橄榄醇的固相萃取(SPE)研究。平衡结合实验表明MIP对模板分子具有更好的识别性。Scatchard分析表明对橄榄醇分子的吸附存在2类不同结合位点,其中高亲和力结合位点和低亲和力结合位点的解离常数分别为0.021和1.002 mmol/L,相应的最大表观结合量分别为18.74和135.9 μmol/g。在优化的固相萃取条件下,MIP固相萃取柱对加标麦麸中橄榄醇的回收率达到97.8%~98.8%,相对标准偏差为2.8%~4.2%(n=5),线性范围为0.1~100 mg/L,检出限(S/N=3)为0.062 mg/L。与非印迹聚合物(NIP)柱及市售聚苯乙烯/二乙烯基苯(PLS)柱相比,MIP柱的选择性更强,回收率更高,纯化效果更好。     

Lysozyme-imprinted polymer synthesized using UV free-radical polymerization

Molecular imprinting is a method to fabricate a polymeric material (molecularly imprinted polymer or MIP) capable of selectively recognizing template molecules. Molecular imprinting of small molecules has been studied widely. Less common, however, is the imprinting of biological macromolecules, including proteins, among which lysozyme is an important molecule in the food, pharmaceutical, and diagnostic sciences. In this study, lysozyme MIP was fabricated in two steps. First, lysozyme, PEG600DMA, and methacrylic acid were used as the template molecule, cross-linking monomer, and the functional monomer, respectively, in a UV free-radical polymerization process to synthesize a polymeric gel. Second, lysozyme was removed by enzymatic digestion. Non-imprinted polymer (NIP) was synthesized without lysozyme addition. To evaluate the preferential binding capability of MIP, lysozyme, RNase A, or a 50:50 mixture of lysozyme and RNase A was added to MIP and NIP and then released by digestion. It was found that when more lysozyme was added to the reaction mixture, the quantity of protein released from the polymer increased, reflecting more potential binding sites. Tests of MIP with a competitive binding mixture of lysozyme and RNase A showed the MIP preferentially bound a greater amount of lysozyme, up to 20 times more than RNase A. NIP bound only small amounts of both proteins and did not show a preference for binding either lysozyme or RNase A. These results demonstrate that lysozyme was successfully imprinted into the MIP by UV free-radical polymerization, and the fabricated MIP was able to preferentially bind its template protein.     

Synthesis of homoveratric acid-imprinted polymers and their evaluation as selective separation materials

A bulk polymerization method was used to easily and efficiently prepare homoveratric acid (3,4-dimethoxyphenylacetic acid)-imprinted polymers from eight basic monomers: 2-vinylpyridine, 4-vinylpyridine, 1-vinylimidazole, N-allylaniline, N-allylpiperazine, allylurea, allylthiourea, and allylamine, in the presence of homoveratric acid as a template in N,N-dimethylformamide as a porogen. The imprinted polymer prepared from allylamine had the highest affinity to the template, showing an imprinting factor of 3.43, and allylamine polymers MIP8/NIP8 were selected for further studies. Their binding properties were analyzed using the Scatchard method. The results showed that the imprinted polymers have two classes of heterogeneous binding sites characterized by two pairs of K(d), B(max) values: K(d)(1) = 0.060 μmol/mL, B(max)(1) = 0.093 μmol/mg for the higher affinity binding sites, and K(d)(2) = 0.455 μmol/mL, B(max)(2) = 0.248 μmol/mg for the lower affinity binding sites. Non-imprinted polymer has only one class of binding site, with K(d) = 0.417 μmol/mL and B(max) = 0.184 μmol/mg. A computational analysis of the energies of the prepolymerization complexes was in agreement with the experimental results. It showed that the selective binding interactions arose from cooperative three point interactions between the carboxylic acid and the two methoxy groups in the template and amino groups in the polymer cavities. Those results were confirmed by the recognition studies performed with the set of structurally related compounds. Allylamine polymer MIP8 had no affinity towards biogenic amines. The obtained imprinted polymer could be used for selective separation of homoveratric acid.     

Preparation and characterization of imprinted microspheres for clopyralid

In this work, the molecularly imprinted polymers (MIPs) and non-imprinted polymers (NIPs) for clopyralid (3,6-DCP) were successfully synthesized via precipitation polymerization using methacrylic acid (MAA) as functional monomer, ethylene glycol dimethacrylate (EGDMA) as crosslinker and a mixture of butanone (MEK) and n-heptane as porogen under the existence of azobisisobutyronitrile (AIBN). The morphologies, particle sizes, structures, adsorption properties and selective recognitions of polymers were investigated systematically. The average particle sizes of MIP3 and NIP3 were 2.76 μm and 2.15 μm. The apparent maximum binding amount (Q_max) of MIP3 and NIP3 were 67.50 mg·g^?1 and 65.02 mg·g^?1 in Scatchard analysis. Langmuir isotherm displayed that the Langmuir constant (K_l) of MIP3 and NIP3 were 0.015 L·mg^?1 and 0.0065 L·mg^?1, the saturation adsorption capacity (Q_max) of MIP3 and NIP3 were 63.23 mg·g^?1 and 58.17 mg·g^?1. Lagergren pseudo-second-order kinetic plot described that the adsorption process of MIP3 was visualized as chemical absorption. Selectivity analysis revealed that MIP3 possessed highly specific recognition for 3,6-DCP.     

Preparation of a pH-sensitive pantoprazole-imprinted polymer and evaluation of its drug-binding and -releasing properties

The aim of this work was to synthesize a pantoprazole-imprinted polymer(MIPs)and study its binding and release properties in an aqueous media.Methacrylic acid(MAA),methacrylamide(MAAM),hydroxyethyl methacrylate(HEMA),and 4-vinyl pyridine(4VP)were tested as functional monomers.Different solvents were also applied as polymerization media under heat or UV radiation.The optimized MIP was prepared in chloroform as a solvent,4-vinyl pyridine as a functional monomer,and ethylene glycole dimethacrylate(EGDMA)as a crosslinker monomer under UV irradiation.Binding and release properties of MIP were studied in comparison with a non-imprinted polymer(NIP)in aqueous media,at different pH values.The protective effect of polymer for drugs against acidic conditions was evaluated at pH 2.Results indicated that the MIP had superior binding properties compared to NIP for pantoprazole.The percentage of drug released from MIP was significantly less than from NIP at all pH values,which was attributed to the presence of imprinted cavities in the MIP matrix.MIP also had a stronger protective effect for pantoprazole in acidic media,in comparison with NIP.     

Molecularly imprinted hydrogels for sustained release of sunitinib in breast cancer therapy

The present work reports on the synthesis of a molecularly imprinted polymer (MIP) based on methacrylic acid and ethylene glycol dimethacrylate for sunitinib delivery. Sunitinib (SUT) is a tyrosine kinase inhibitor used in many cancer diseases. Like the majority of the anticancer drugs, SUT suffers of a low bioavailability, and at the same time, it is characterized by a narrow therapeutic window. In order to reduce drug systemic toxicity, we synthesized a MIP‐based drug delivery system for SUT‐controlled release. MIP was obtained by bulk polymerization through the so‐called noncovalent approach. Rebinding experiments were performed to evaluate the success of the imprinting process and the ability of MIP to bind in a specific and selective fashion the template molecule. Resulting data showed that sunitinib rebinding percentage was 70%, while nonimprinted polymer (NIP) rebinding percentage was 46%. A not significant difference was observed between MIP and NIP in semaxanib binding experiments. Moreover, the drug release profiles were studied for both MIP and NIP. A sustained release was observed from sunitinib‐loaded MIP during 24 hours, reaching 58% after 6 hours and 76% at the end‐point. NIP, on the contrary, released almost 90% of the loaded drug within 6 hours. Furthermore, the drug carrier was tested in vitro against MCF‐7 cells, in which the cytotoxic effect of sunitinib released from MIP reached the maximum after 72 hours, while NIP completed its effect within 48 hours. These results demonstrated that molecularly imprinted polymers are suitable systems for SUT release.     

Dopamine-imprinted polymers: template-monomer interactions, analysis of template removal and application to solid phase extraction

A dopamine-imprinted polymer (MIP) was prepared in aqueous methanol solution at 60(o)C by free-radical cross-linking polymerization of methacrylic acid in the presence of ethylene glycol dimethacrylate as the cross-linker and dopamine hydrochloride as the template molecule. Its ability to isolate dopamine was evaluated as the basis of a solid phase extraction procedure and compared with that of a non-imprinted polymer(NIP). The binding of dopamine was 84.1% and 29.1% for MIP and NIP, respectively.Various reported post-polymerization treatments to reduce template bleeding were examined. In our case the lowest bleeding was achieved after applying a combined procedure: continuous extraction in a Soxhlet apparatus (CE), followed by microwave-assisted extraction (ME) to a level of 0.061 microg/mL. A simplified model of the template-monomer complexes allowed rationalization of monomer choice based on the heats of complex formation at a PM3 level of theory.     

Synthesis and Evaluation of Molecularly Imprinted Polymers as Sorbents for Selective Extraction of Coumarins

Coumarin, 7-hydroxycoumarin and dicoumarol molecularly imprinted polymers (MIP) were synthesized by bulk polymerization. Methacrylic acid and 4-vinylpyridine were tested as functional monomers and methanol, ethanol, acetonitrile, toluene and chloroform were tested as porogens. The binding capabilities of the imprinted polymers were assessed by equilibrium binding analysis. Highest binding capacity was obtained for MIP prepared for the template 7-hydroxycoumarin synthesized in methacrylic acid as functional monomer, chloroform as porogen and methanol/water as analyte solvent. Scanning electron microscopy analysis documented its appropriate morphology. ATR-FTIR spectra confirmed successful polymerization of MIP. Coumarin structural analogues were employed to evaluate the polymer selectivity and it was found that polymer prepared for 7-hydroxycoumarin was selective for its template molecule. Kinetic studies showed relatively fast adsorption of analytes to MIPs (1 h). Rebinding properties of MIPs were evaluated by adsorption isotherms. The calculated data fitted well with experimental data showing that Freundlich isotherm is suitable for modelling the adsorption of tested coumarins on prepared MIPs. Applicability of polymer prepared for 7-hydroxycoumarin was tested for the selective extraction of coumarins from the sample of chicory.     

Preparation and application of molecularly imprinted polymer for isolation of chicoric acid from Chicorium intybus L. medicinal plant

Molecularly imprinted polymer (MIP) was synthesized and applied for the extraction of chicoric acid from Chicory herb (Chicorium intybus L.). A computational study was developed to find a suitable template to functional monomer molar ratio for MIP preparations. The molar ratio was chosen based on the comparison of the binding energy of the complexes between the template and functional monomers. Based on the computational results, eight different polymers were prepared using chicoric acid as the template. The MIPs were synthesized in a non-covalent approach via thermal free-radical polymerization, using two different polymerization methods, bulk and suspension. Batch rebinding experiments were performed to evaluate the binding properties of the imprinted polymers. The best results were obtained with a MIP prepared using bulk polymerization with 4-vinylpyridine (4-VP) as the functional monomer and ethylene glycol dimethacrylate (EGDMA) as the crosslinker with a molar ratio of 1:4:20. The best MIP showed selective binding ability toward chicoric acid in the presence of the template’s structural analogues, caffeic acid, caftaric acid and chlorogenic acid.     

Synthesis and characterization of molecularly imprinted polymers for selective solid-phase extraction of pseudoephedrine

Molecular imprinted solid-phase extraction (MISPE) is a well known technique for the selective extraction and pre-concentration of analytes, are present at low levels in chemically complex materials. Herein, water-soluble, molecularly imprinted polymers (MIP) were prepared for solid-phase extraction of pseudoephedrine hydrochloride (PSE), which was monitored at 256 nm by the UV spectroscopy. MISPE conditions were optimized to allow the selective and determination of PSE in aqueous samples and composite materials, such as biological fluids and human urine. MIP was prepared by precipitation polymerization method, using methacrylic acid as a functional monomer and ethylene glycol dimethacrylate as a cross-linking agent in either acetonitrile or chloroform. The results suggest that the obtained MISPE exhibits high affinity for PSE, and the imprinted polymer demonstrates much higher efficiency than a non-imprinted polymer (NIP). The imprinting-induced extraction was confirmed by the determination of recovery values for NIP (4%) and MIP (80%) polymers, respectively. The binding capacity of the MIP for PSE was found of 47.6 mg g⁻¹.     

A novel molecularly imprinted method with computational simulation for the affinity isolation and knockout of baicalein from Scutellaria baicalensis

A novel molecularly imprinted polymer (MIP) was synthesized by precipitation polymerization with baicalein (BAI) as the template and used as solid‐phase extraction (SPE) adsorbent, aiming at the affinity isolation and selective knockout of BAI from Scutellaria baicalensis Georgi (SB). We used computational simulation to predict the optimal functional monomer, polymerization solvent and molar ratio of template to functional monomer. Characterization and performance tests revealed that MIP exhibited uniform spherical morphology, rapid binding kinetics, and higher adsorption capacity for BAI compared with nonimprinted polymer (NIP). The application of MIP in SPE coupled with high‐performance liquid chromatography to extract BAI from SB showed excellent recovery (94.3%) and purity (97.0%). Not only the single BAI compound, but also the BAI‐removed SB extract was obtained by one‐step process. This new method is useful for isolation and knockout of key bioactive compounds from herbal medicines. Copyright © 2015 John Wiley & Sons, Ltd.     

反乌头酸分子印迹聚合物微球的制备及其分子识别功能

以乙腈为分散剂,采用沉淀聚合法合成了反乌头酸分子印迹聚合物微球。研究了合成反应条件对聚合物形貌的影响,发现聚合前主客体氢键络合物和功能单体氢键低聚体是控制微球形成及其粒径大小的关键因素。通过振荡吸附法对聚合物的结合特性进行了评价,发现印迹聚合物微球对模板分子的识别选择性优于块状印迹聚合物和非印迹聚合物。     

孔雀石绿分子印迹聚合物的制备及其吸附

采用本体聚合法制备了孔雀石绿分子印迹聚合物,对功能单体的种类及用量、交联剂用量、模板浓度和聚合时间等参数进行了优化,并通过等温吸附实验,考察聚合物的吸附性能。 结果表明,以α-甲基丙烯酸为功能单体,当孔雀石绿、α-甲基丙烯酸和乙二醇二甲基丙烯酸酯的摩尔比为1∶4∶20时,所合成的聚合物具有最大的吸附容量,印迹因子（α=QMIP/QNIP）可达到3.6,表明合成的印迹聚合物对孔雀石绿有良好的识别和富集能力。     

分子印迹聚合物选择性富集长春碱的研究

分子印迹聚合物(MIPs)是近年来发展起来的一种对特定分子(模板分子)具有高度选择性的合成高分子材料.本文以长春碱(VLB)为模板分子,以甲基丙烯酸(MAA)为功能单体、乙二醇二甲基丙烯酸酯(EGDMA)为交联剂,在偶氮二异丁腈(AIBN)的引发下制备了长春碱印迹聚合物(VLB-MIP).采用紫外光谱对VLB与MAA之间形成的模板-功能单体复合物进行了分析,通过扫描电镜(SEM)对制备的VLB-MIP的表面形态进行了表征,并用BET法对MIP表面的孔径进行了测定.结果表明,VLB-MIP与未加模板分子制备的非印迹聚合物(NIP)相比表面多孔、粗糙,比表面积显著增加.以VLB-MIP作为固相萃取(SPE)的吸附剂,对VLB-MIP的选择性进行了评价,VLB-MIP能特异性地吸附VLB,而对VLB的结构类似物长春新碱(VCR)却没有表现出明显的吸附行为.将长春花提取物上样于填充VLB-MIP的SPE柱上,在最优实验条件下,长春花提取物中的VLB能被高效富集.此外,上样溶剂对MIP柱的吸附容量有影响,长春花提取物溶于非极性溶剂甲苯时,MIP的吸附容量最大为750μg/g,其次是氯仿吸附容量为625μg/g,最小的是甲醇为250μg/g.     

One‐pot synthesis of surface‐functionalized molecularly imprinted polymer microspheres by iniferter‐induced “living” radical precipitation polymerization

This article describes for the first time the development of a new polymerization technique by introducing iniferter‐induced “living” radical polymerization mechanism into precipitation polymerization and its application in the molecular imprinting field. The resulting iniferter‐induced “living” radical precipitation polymerization (ILRPP) has proven to be an effective approach for generating not only narrow disperse poly(ethylene glycol dimethacrylate) microspheres but also molecularly imprinted polymer (MIP) microspheres with obvious molecular imprinting effects towards the template (a herbicide 2,4‐dichlorophenoxyacetic acid (2,4‐D)), rather fast template rebinding kinetics, and appreciable selectivity over structurally related compounds. The binding association constant K_a and apparent maximum number N_max for the high‐affinity sites of the 2,4‐D imprinted polymer were determined by Scatchard analysis and found to be 1.18 × 10⁴ M^?1 and 4.37 μmol/g, respectively. In addition, the general applicability of ILRPP in molecular imprinting was also confirmed by the successful preparation of MIP microspheres with another template (2‐chloromandelic acid). In particular, the living nature of ILRPP makes it highly useful for the facile one‐pot synthesis of functional polymer/MIP microspheres with surface‐bound iniferter groups, which allows their direct controlled surface modification via surface‐initiated iniferter polymerization and is thus of great potential in preparing advanced polymer/MIP materials. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3217–3228, 2010     

Developing imprinted polymer nanoparticles for the selective separation of antidiabetic drugs

In this study, new molecularly imprinted polymer (MIP) nanoparticles are designed for selective recognition of different drugs used for the treatment of type 2 diabetes mellitus, i.e. sitagliptin (SG) and metformin (MF). The SG‐ and MF‐imprinted polymer nanoparticles are synthesized by free‐radical initiated polymerization of the functional monomers: methacrylic acid and methyl methacrylate; and the crosslinker: ethylene glycol dimethacrylate. The surface morphology of resultant MIP nanoparticles is studied by atomic force microscopy. Fourier transform infrared spectra of MIP nanoparticles suggest the presence of reversible, non‐covalent interactions between the template and the polymer. The effect of pH on the rebinding of antidiabetic drugs with SG‐ and MF‐imprinted polymers is investigated to determine the optimal experimental conditions. The molecular recognition characteristics of SG‐ and MF‐imprinted polymers for the respective drug targets are determined at low concentrations of SG (50–150 ppm) and MF (5–100 ppm). In both cases, the MIP nanoparticles exhibit higher binding response compared to non‐imprinted polymers. Furthermore, the MIPs demonstrate high selectivity with four fold higher responses toward imprinted drugs targets, respectively. Recycled MIP nanoparticles retain 90% of their drug‐binding efficiency, which makes them suitable for successive analyses with significantly preserved recognition features.     

Polypropylene non-woven supported fibronectin molecular imprinted calcium alginate/polyacrylamide hydrogel film for cell adhesion

Fibronectin (FN) imprinted polypropylene (PP) non-woven supported calcium alginate/polyacrylamide hydrogel film (PP-s-CA/PAM MIP) was prepared using non-woven PP fiber as matrix, FN as template molecule, sodium alginate (SA) and acrylamide (AM) as functional monomers, via UV radiation-reduced polymerization. The PP-s-CA/PAM MIP exhibited an obvious improvement in terms of adsorption capacity for FN compared with non-imprinted polymer (NIP). The PP-s-CA/PAM MIP was successfully used for the culture of mouse fibroblast cells (L929) and the results showed that PP-s-CA/PAM MIP exhibited better cell adherence performance than the NIP did.