Toward predictive permeabilities: Experimental measurements and multiscale simulation of methanol transport in Nafion

A polymer membrane's permeability to solutes determines its suitability for various applications: a permeability value is essential for predicting performance in diverse contexts. Using aqueous methanol permeation through Nafion as an example, we describe a methodology for determining membrane permeability that accounts for boundary layer effects and the possibility of swelling. For the materials and apparatus used herein, analysis of a permeance measurement and computational fluid dynamics simulations show that the mass transfer boundary layer is on the order of ones to tens of microns. The data are used to develop and validate a multiscale model describing solute permeation through a hydrated membrane as a series of physical mechanistic steps: reversible adsorption from solution at the membrane interface, diffusion driven by a concentration gradient within the membrane, and reversible desorption into solution at the opposite membrane interface. The validated model is used to predict methanol transport across a solar-driven CO₂ reduction device and to assess the impact of polymer changes on the measured value. The approach of combining experimental data, computational fluid dynamics, and the mechanistic multiscale model is expected to provide more accurate analysis of membrane permeation data in cases with polymer swelling or unusual device geometries, among others.     

Kinetische Betrachtung der Verteilung von elektrisch neutralen Ionophoren zwischen einer Flüssigmembran und einer wässerigen Phase

Kinetic Study of the Distribution of Electrically Neutral Ionophores between a Solvent Polymeric Membrane and an Aqueous Phase The kinetic behaviour of a series of ligands in the transfer from a solvent polymeric membrane into a stirred aqueous phase was investigated and compared with theoretical kinetic models. It was found that the transfer of ligands with low lipophilicity was controlled by the diffusion in the membrane phase, and that of ligands with high lipophilicity was controlled by the exchange reaction at the phase boundary and/or the diffusion through the unstirred Nernst diffusion layer. The diffusion coefficients in the membrane decrease drastically on increase of the content of the polymer in the membrane and are nearly independent of the size and lipophilicity of the ligand, whereas the overall transfer coefficient through the boudary region does not depend on the polymer content but decreases with increasing lipophilicity of the ionophore.     

Interaction of a poly(acrylic acid) oligomer with dimyristoylphosphatidylcholine bilayers

We studied the influence of 5 kDa poly(acrylic acid) (PAA) on the phase state, thermal properties, and lateral diffusion in bilayered systems of dimyristoylphosphatidylcholine (DMPC) using (31)P NMR spectroscopy, differential scanning calorimetry (DSC), (1)H NMR with a pulsed field gradient, and (1)H nuclear Overhauser enhancement spectroscopy (NOESY). The presence of PAA does not change the lamellar structure of the system. (1)H MAS NOESY cross-peaks observed for the interaction between lipid headgroups and polyion protons demonstrated only surface PAA-biomembrane interaction. Small concentrations of PAA (up to ～4 mol %) lead to the appearance of a new lateral phase with a higher main transition temperature, a lower cooperativity, and a lower enthalpy of transition. Higher concentrations lead to the disappearance of measurable thermal effects. The lateral diffusion coefficient of DMPC and the apparent activation energy of diffusion gradually decreased at PAA concentrations up to around 4 mol %. The observed effects were explained by the formation of at least two types of PAA-DMPC lateral complexes as has been described earlier (Fujiwara, M.; Grubbs, R. H.; Baldeschwieler, J. D. J. Colloid Interface Sci., 1997, 185, 210). The first one is characterized by a stoichiometry of around 28 lipids per polymer, which corresponds to the adsorption of the entire PAA molecule onto the membrane. Lipid molecules of the complex are exchanged with the "pure" lipid bilayer, with the lifetime of the complex being less than 0.1 s. The second type of DMPC-PAA complex is characterized by a stoichiometry of 6 to 7 lipids per polymer and contains PAA molecules that are only partially adsorbed onto the membrane. A decrease in the DMPC diffusion coefficient and activation energy for diffusion in the presence of PAA was explained by the formation of a new cooperative unit for diffusion, which contains the PAA molecule and several molecules of lipids.     

Diffusion NMR as a new method for the determination of the gel point of gelatin

The gelation of gelatin has been investigated using pulsed field gradient (PFG) NMR. For the first time, diffusion results have been used to determine the gelation point, which is indicated by a minimum in the self-diffusion coefficient of the free polymer fraction vs temperature. Biexponential analysis of the diffusion decay data allowing the diffusion of free and network-bound gelatin to be determined separately has been applied to provide an extended insight into the gelation process. Low-amplitude oscillatory shear rheology and time-resolved dynamic light scattering (DLS) as classical polymer characterization methods were applied as control experiments. All three methods yielded a gelation temperature of 24-25 degrees C for the cooling regime. Hysteresis effects could also be observed.     

Pervaporation performance of PDMS-NiY zeolite hybrid membranes in the desulfurization of gasoline

PDMS-Ni²⁺Y zeolite hybrid membranes were fabricated and used for the pervaporation removal of thiophene from model gasoline system. The structural morphology, mechanical stability, crystallinity, and free volume characteristics of the hybrid membranes were systematically investigated. Molecular dynamics simulation was employed to calculate the diffusion coefficients of small penetrants in the polymer matrix and the zeolite. The effect of Ni²⁺Y zeolite content on pervaporation performance was evaluated experimentally. With the increase of Ni²⁺Y zeolite content, the permeation flux increased continuously, while the enrichment factor first increased and then decreased possibly due to the occurrence of defective voids within organic–inorganic interface region. The PDMS membrane containing 5.0 wt% Ni²⁺Y zeolite exhibited the highest enrichment factor (4.84) with a permeation flux of 3.26 kg/(m² h) for 500 ppm sulfur in feed at 30 °C. The effects of operating conditions on the pervaporation performance were investigated in detail. It has been found that the interfacial morphology strongly influenced the separation performance of the hybrid membrane, and it was of great significance to rationally modify the interfacial region in order to improve the organic–inorganic compatibility.     

Single-molecule motions of oligoarginine transporter conjugates on the plasma membrane of Chinese hamster ovary cells

To explore the real-time dynamic behavior of molecular transporters of the cell-penetrating-peptide (CPP) type on a biological membrane, single fluorescently labeled oligoarginine conjugates were imaged interacting with the plasma membrane of Chinese hamster ovary (CHO) cells. The diffusional motion on the membrane, characterized by single-molecule diffusion coefficient and residence time (tau R), defined as the time from the initial appearance of a single-molecule spot on the membrane (from the solution) to the time the single molecule disappears from the imaging focal plane, was observed for a fluorophore-labeled octaarginine (a model guanidinium-rich CPP) and compared with the corresponding values observed for a tetraarginine conjugate (negative control), a lipid analogue, and a fluorescently labeled protein conjugate (transferrin-Alexa594) known to enter the cell through endocytosis. Imaging of the oligoarginine conjugates was enabled by the use of a new high-contrast fluorophore in the dicyanomethylenedihydrofuran family, which brightens upon interaction with the membrane at normal oxygen concentrations. Taken as a whole, the motions of the octaarginine conjugate single molecules are highly heterogeneous and cannot be described as Brownian motion with a single diffusion coefficient. The observed behavior is also different from that of lipids, known to penetrate cellular membranes through passive diffusion, conventionally involving lateral diffusion followed by membrane bilayer flip-flop. Furthermore, while the octaarginine conjugate behavior shares some common features with transferrin uptake (endocytotic) processes, the two systems also exhibit dissimilar traits when diffusional motions and residence times of single constructs are compared. Additionally, pretreatment of cells with cytochalasin D, a known actin filament disruptor, produces no significant effect, which further rules out unimodal endocytosis as the mechanism of uptake. Also, the involvement of membrane potential in octaarginine-membrane interaction is supported by significant changes in the motion with high [K(+)] treatment. In sum, this first study of single transporter motion on the membrane of a living cell indicates that the mode by which the octaarginine transporter penetrates the cell membrane appears to either be a multimechanism uptake process or a mechanism different from unimodal passive diffusion or endocytosis.     

Solution calorimetry to monitor swelling and dissolution of polymers and polymer blends

The observed rate of drug release from a polymeric drug delivery system is governed by a combination of diffusion, swelling and erosion. It is thus not a simple task to determine the effects of the polymer on the observed drug release rate, because the swelling characteristics of the polymer are inferred from the drug release profile. Here we propose to use solution calorimetry to monitor swelling. Powdered polymer samples (HPMC E4M, K4M, K15M and NaCMC, both alone and in a blend) were dispersed into water or buffer (pH 2.2 and 6.8 McIlvaine citrate buffers) in a calorimeter and the heat associated with the swelling phenomena (hydration, swelling, gelation and dissolution) was recorded. Plots of normalised cumulative heat (i.e. q_t/Q, where q_t is the heat released up to time t and Q the total amount of heat released) versus time were analysed by the power law model, in which a fitting parameter, n, imparts information on the mechanism of swelling.

For all systems the values of n were greater than 1, which indicated that dissolution occurred immediately following hydration of the polymer. However, while not suitable for determining reaction mechanism, the values of n for each polymer were significantly different and, moreover, were observed to vary both as a function of particle size and dissolution medium pH. Thus, the values of n may serve as comparative parameters. Properties of the polymer blends were observed to be different from those of either constituent and correlated with the behaviour seen for polymer tablets during dissolution experiments. The data imply that solution calorimetry could be used to construct quantitative structure–activity relationships (QSARs) and hence to optimise selection of polymer blends for specific applications.     

Effect of carrier concentration on the facilitated oxygen transport in a polymer membrane

Facilitated transport of oxygen in a solid Polymer membrane containing cobaltporphyrin (CoP) which carries oxygen specifically and reversibly, leads to permselectivity of oxygen against nitrogen in the membrane. The increase in concentration of the CoP carrier is expected to enhance the oxygen transport. The membranes of poly(octylmethacrylate-co-vinylimidazole) containing 0.8 ～ 10 wt% CoP were prepared, and the effects of the CoP-concentration on the transport and the diffusion constants of oxygen are studied. Although the induction period before the steady state of oxygen permeation was prolonged with the CoP concentration in the polymer membrane, the glass transition temperature (T_g) of the membrane was increased and the diffusion constants of oxygen were decreased with the CoP concentration to yield unexpected reduction of the oxygen permeation in the highly CoP loaded membrane.     

Transmission and fractionation of micro-sized particle suspensions

In processes aimed at the fractionation of a multi-component feed stream, transmission of particles through the membrane is at least as important as retention of larger particles. In this paper, we describe the mechanisms of transmission of mono-disperse latex particles through a polymer membrane. The effects of process parameters, such as transmembrane pressure, cross flow velocity and feed concentration were investigated. In dead end filtration mode, we found that, depending on the transmembrane pressure, four particle transmission regimes could be distinguished.

Particle deposition on polymer membranes and polymer microsieves was investigated in-line with confocal scanning laser microscopy (CSLM). It was observed that with the polymer membrane random depth deposition took place, while the microsieve exhibited in-pore fouling.

In addition, bi-disperse particle suspensions were fractionated with dead end and cross flow membrane filtration, and various effects were charted. Based on the phenomena observed, it is concluded that the design of a fractionation process starts with defining a stable transmission regime for small particles, and subsequently choosing the process conditions for minimal deposition of the larger particles.     

锌-槲皮素配位分子印迹聚合物膜渗透特性的研究

采用紫外光引发原位聚合的方法制备了以聚偏氟乙烯管状微孔滤膜为支撑膜的锌离子配位分子印迹聚合物膜. 通过膜渗透实验表明, 在一定浓度锌离子存在下, 印迹膜对模板分子槲皮素表现出良好的渗透选择性. 分别考察了阳离子和阴离子对印迹膜渗透模板分子的影响. 本工作对分子印迹技术应用于实际样品中槲皮素的分离与富集具有重要意义.     

Measurement of the Rates of Diffusion of Halomethanes into Polymer Films Using ATR-FTIR Spectroscopy

Polymer-modified attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy and FEWS (fibre-optic evanescent wave) spectroscopy have been very successful to date for sensitive detection of organic pollutants in water utilising the mid-infrared (MIR) region of the electromagnetic spectrum (4000-400 cm^?1). This sensing approach involves the use of different polymer films for preconcentration with optimisation of the sensor related to the rate of diffusion of solvent molecules into these polymer films. Compounds such as chloroform, bromoform, bromodichloromethane and dibromochloromethane which are collectively referred to as trihalomethanes (THMs) were analysed in this work. A gaseous phase experimental design was used and from experimental data the rate of diffusion of each of the halomethanes was quantified based on a Fickian type diffusion model. Individual diffusion coefficient values were found to be in the range 3.38 E-10 ± 0.01 E-10 to 4.72 E-08 ± 0.42 E-08 cm² s^?1. Multicomponent effects were observed for mixtures of compounds diffusing into polyisobutylene and ethylene-propylene copolymer.     

Solvent-Polymer Interaction. II. Measurements of Liquid Solvent Molecules Associating with Polymer Sites and of Their Transport Behavior in Polymer Membrane by Thermogravimetry,GLC, and Mass Spectrometry

The measurement of sorption and diffusion behavior of liquid ethanol and water solvent mixtures in polyurethane membrane were made simultaneously by thermogravimetry. The individual amounts of sorbed water and ethanol in the polymer membrane were estimated by thermogravimetry and differentiated by mass spectrometry. In addition, from a single dynamic thermogravimetric experiment the activation energy for solvent molecules desorbing from the polymer membrane was also determined. The thermodynamic activity of ethanol vapor in equilibrium with the ethanol-water-polyurethane system was determined by gas-liquid chromatography. The clustering functions, the mean numbers of solvent molecules in the clusters, and those associating with polymer sites were evaluated by applying simplified mathematical derivatives using the experimentally determined values of activity and volume fraction of solvent molecules. It was found that at lower ethanol concentration the tendency for ethanol molecules to cluster together is high. At higher ethanol activity, ethanol-polymer site interactions predominantly occurred.

Similar results were observed for ethanol-water molecules. However, water molecules in this particular system did not exhibit a self-associating tendency nor interact with the polymer sites. It was concluded that the Zimm-Lundberg clustering theory can be adequately applied to the interpretation of sorption and diffusion behavior of liquid ethanol-water mixtures in the polymer membrane.     

Gel permeation chromatography with mixed eluents: Polymer solution as mobile phase

The GPC elution behaviour of a polymer was studied when a solution of another polymer in a liquid was used as an eluent. In ternary systems containing two polymers, GPC results are influenced by the thermodynamics of polymer incompatibility. The incompatibility manifests itself both in the slope of the dependence of elution volume upon the concentration of injected polymer and in the shift of elution volumes extrapolated to zero concentration. Experimental data for systems containing poly(styrene) and poly(methyl methacrylate) have been accounted for qualitatively by theoretical views on coil shrinkage resulting from polymer incompatibility. The concentration effects of the injected polymer and the polymer in the mobile phase on elution volume are compared; further parameters affecting the separation in the systems with polymer solution as eluent are discussed.     

溶菌酶分子印迹聚合物膜的制备及其吸附性能

以溶菌酶为模板蛋白质，结合分子印迹技术在硅烷化的基质玻片上制备了溶菌酶分子印迹聚合物膜。实验优化了溶菌酶聚合物膜的印迹体系，考察了溶菌酶分子印迹聚合物膜的吸附平衡时间、最大吸附量、特异识别能力、重复使用性以及对实际样品中溶菌酶的分离情况。结果表明，在最优条件下，制备的分子印迹聚合物膜对溶菌酶具有特异吸附能力，印迹因子为3.0，吸附平衡时间为5 min，吸附行为符合Langmuir吸附模型，理论最大吸附量为42.5 mg/g，实际样品中的吸附量为30 mg/g。且此印迹聚合物膜在重复使用5次后，最大吸附量仅下降了5%，具有良好的重复使用性。该方法为复杂生物样品中目标蛋白质的分离富集提供了一种快速、高效的手段。     

A new solvent polymeric membrane electrode incorporating poly(N-isopropylacrylamide) as a polymer

Here, we report on a new solvent polymeric membrane electrode incorporating thermoresponsive poly(N-isopropylacrylamide) (PIPA) as a polymer with the lower critical solution temperature (LCST) of ca. 32 °C. The response of the solvent polymeric membrane electrode to the ions changes at 25 and 40 °C. Pulsed NMR analyses demonstrated the novel effects of the LCST behaviour on the potentiometric polymeric membrane.     

Asymmetric membrane formation via immersion precipitation method. I. Kinetic effect

The kinetic effect of the phase inversion process on the membrane morphology is explored, with emphasis on the diffusion coefficient of the nonsolvent as a measure of the solvent/nonsolvent exchange rate. The diffusion coefficient is closely related to the nonsolvent tolerance of the polymer solution, which was estimated from a pseudo-ternary phase diagram of the following system: polymer: polysulfone; solvent system: a mixture of the solvent 1-methyl-2-pyrrolidinone and a solvent additive (formic acid, water or ethanol); and nonsolvent: ethanol. Regardless of the kind of solvent additive employed, when the diffusion coefficient of the nonsolvent is high for a given gelation medium, then the membrane consists of a smooth, defect-free surface and macrovoid-free cross section, and is highly permeable to oxygen. However, using a polymer solution with a low diffusion coefficient results in a membrane of a rather defective morphology. Therefore, it is concluded that the diffusion coefficient of the nonsolvent is a crucial parameter in controlling membrane morphology.     

Investigation of relative humidity effects on the response behavior of a pH indicator-based OWG vapor sensor

The response of a pH indicator-based optical waveguide sensor was characterized with respect to the effects of relative humidity (RH) on the magnitude of the sensor response, and on the rate of response to both hydrochloric acid and ammonia/ammonium hydroxide vapors. Water vapor constitutes both a chemical and a systematic (optical) interference for the OWG sensor response to hydrochloric acid. Swelling of the polymer films upon exposure to water vapor results in a decrease in the loss of light at the polymer/air interface, resulting in an increase in the sensor signal. In addition, high RH conditions decrease the bromothymol blue indicator response to hydrochloric acid vapor. In contrast, the bromothymol blue indicator response to ammonia increases as the RH increases. High RH levels also increases the rate of diffusion (transport) of hydrochloric acid into (and out of) Nafion films, but does not affect the diffusion rate for poly(vinyl alcohol) polymer films. The RH does not appear to have any significant effect on the rate of transport of ammonia in any of the polymer films studied.     

The influence of membrane electrode assembly water content on the performance of a polymer electrolyte membrane fuel cell as investigated by 1H NMR microscopy

The relation between the performance of a self-humidifying H(2)/O(2) polymer electrolyte membrane fuel cell and the amount and distribution of water as observed using (1)H NMR microscopy was investigated. The integrated (1)H NMR image signal intensity (proportional to water content) from the region of the polymer electrolyte membrane between the catalyst layers was found to correlate well with the power output of the fuel cell. Several examples are provided which demonstrate the sensitivity of the (1)H NMR image intensity to the operating conditions of the fuel cell. Changes in the O(2)(g) flow rate cause predictable trends in both the power density and the image intensity. Higher power densities, achieved by decreasing the resistance of the external circuit, were found to increase the water in the PEM. An observed plateau of both the power density and the integrated (1)H NMR image signal intensity from the membrane electrode assembly and subsequent decline of the power density is postulated to result from the accumulation of H(2)O(l) in the gas diffusion layer and cathode flow field. The potential of using (1)H NMR microscopy to obtain the absolute water content of the polymer electrolyte membrane is discussed and several recommendations for future research are provided.     

PFG-NMR approach to determining the water transport mechanism in polymer electrolyte membranes conditioned at different temperatures

Two types of polymer electrolyte membranes (PEMs), Nafion (NR-212) and sulfonated poly(4-phenoxybenzoyl-1,4-phenylene) (sPPBP), were conditioned under air flow in independently controlled temperature and relative humidity conditions. The effects of temperature and relative humidity on the diffusion behavior of water in the PEMs were investigated by pulsed field gradient (PFG) NMR. The two PEMs show different tendencies, especially with respect to their temperature effects. In a comparison of diffusion data with proton conductivity, mechanisms for proton conduction in the PEMs were considered. It was suggested that proton conduction by proton hopping occurs to a larger extent in NR-212 than in a hydrocarbon-based membrane. Temperature-affected microstructural changes below the glass transition temperature are also discussed.