低分子量N-羧丁酰壳聚糖的合成及其吸湿保湿性

低分子量N-羧丁酰壳聚糖的合成及其吸湿保湿性;低分子量壳聚糖;低分子量N-羧丁酰壳聚糖;吸湿性;保湿性     

羧甲基壳聚糖的取代度及保湿性

吸湿性;分子量;羧甲基壳聚糖的取代度及保湿性     

N-琥珀酰壳聚糖的合成和性能研究

通过控制反应时间，制备了一系列取代度不同的N-琥珀酰壳聚糖。测定了产物的取代度、特性粘数、吸湿与保湿性，并用IR进行了结构表征。结果表明：壳聚糖在C2位上引入了琥珀酰基后可溶于水，其吸湿性与保湿性随取代度的增加而增强，且优于壳聚糖和透明质酸。     

壳聚糖季铵盐的合成及结构表征

用异相法合成了水溶性壳聚糖季铵盐衍生物，并用红外光谱及核磁共振谱进行结构表征。结果表明：在中性反应条件下，壳聚糖分子的季铵盐衍生化反应主要发生于亲该中心Ｃ２位的氨基上，所合成的壳聚糖季铵盐衍生物可直接溶解于水。其水溶液可以任意比例与乙醇、丙二醇、甘油等混溶。     

新型载药壳聚糖季铵盐的合成、结构与性能

通过羧甲基壳聚糖接枝二甲基十八烷基环氧丙基氯化铵, 制备了一系列不同取代度和分子量的羧甲基壳聚糖十八烷基季铵盐(QACMC). 用傅立叶变换红外(FTIR)光谱、核磁共振谱(1H-NMR)、X射线衍射(XRD)谱、差式扫描量热法(DSC)等对其分子结构、结晶和热性能进行研究, 同时研究QACMC的吸湿保湿性能, 并与透明质酸(HA)、壳聚糖(chitosan)和羧甲基壳聚糖(CMC)进行比较. 结果表明, QACMC具有较好的结晶性和热稳定性, 结晶度可达72.3%; 其吸湿保湿性低于透明质酸(HA)和羧甲基壳聚糖, 而受季铵基团取代度和QACMC分子量的影响, 羧酸盐和季铵盐两种亲水基团对QACMC吸湿性的影响不具有协同作用; QACMC对亲脂性药物盐酸米诺环素的载药率可达10.9%(质量分数), 远高于壳聚糖和羧甲基壳聚糖.     

低分子量N,O-羧甲基壳聚糖的合成及吸湿保湿性能

采用不同反应温度、反应时间和低分子量壳聚糖与氯乙酸摩尔比,在非均相反应体系中合成了不同取代度的低分子量N,O-羧甲基壳聚糖。当反应温度为60°C,反应时间为4h,低分子量壳聚糖与氯乙酸投料比为1∶1.5时,目标产物的取代度可达71%。吸湿保湿性能测定表明:取代度越大,低分子量N,O-羧甲基壳聚糖的吸湿保湿性越好,在相对湿度为81%,取代度从27%增大到71%时,其吸湿性从32.14%增大到37.27%,保湿性从310.72%增大到348.69%。     

新型壳聚糖双季铵盐的制备及其抗氧化活性

将2,3-环氧丙基三甲基氯化铵(CTA)与壳聚糖反应,制备了水溶性壳聚糖季铵盐(HTCC),然后,以HTCC与氯乙酰氯反应得到氯乙酰壳聚糖季铵盐(CAHTCC),最后,以吡啶取代CAHTCC中的活泼氯,得到水溶性壳聚糖双季铵盐(PAHTCC)。 通过红外光谱和¹³C核磁共振光谱等技术手段对产物结构进行了表征,同时测试了原料壳聚糖及其衍生物清除羟自由基、超氧阴离子以及DPPH的活性。 结果表明,PAHTCC的活性较原料壳聚糖及壳聚糖单季铵盐HTCC均有明显提高,在实验浓度1.6 g/L时,其对羟自由基、超氧阴离子及DPPH的清除率分别达到68.5%、74.3%和80.8%。 聚阳离子性大幅增强,进而抗氧化活性提高。     

羧甲基壳聚糖-g-(2-氯乙酰氧基-4-甲氧基-二苯甲酮)的合成及其紫外吸收性能

2-羟基-4-甲氧基二苯甲酮(紫外线吸收剂)与一氯乙酰氯反应制得功能中间体2-氯乙酰氧基-4-甲氧基-二苯甲酮(1);在碱性条件下1与羧甲基壳聚糖(CMC)在异丙醇中通过N-烷基化反应实现1在CMC上的接枝,合成了一系列新型CMC接枝物——CMC-g-1n(2-G,G=接枝率),其结构经UV,IR和XRD表征.并测试了2-G的吸湿性、保湿性以及溶解性.结果表明,2-G在311 nm处有最大紫外吸收;吸湿性随G的增大减小;保湿性随G的增大提高;2-G有较好的水溶性.     

O-季铵化-N-壳聚糖Schiff碱的合成及表征

对壳聚糖氨基和羟基进行化学改性,合成了水溶性双功能化壳聚糖衍生物O-季铵化-N-壳聚糖Schiff碱(O-HTCCS);用红外光谱表征了产物的结构;确定了O-HTCCS的最佳合成条件,并测定了其溶解性能.结果表明,合成O-HTCCS的最佳条件为:壳聚糖Schiff碱/缩水甘油三甲基氯化铵(GTMAc)摩尔比为1∶5;反应时间24 h;反应温度70℃.在最佳条件下合成O-HTCCS的产率为78.5%,季铵化度为89.7%.与此同时,O-HTCCS的水溶性随季铵化度的增大而提高,季铵化度达到70%以上能溶于水;且其在有机溶剂中的溶解性优于壳聚糖.     

壳聚糖改性技术的新进展Ⅱ交联化、季铵盐化、羧基化改性及其低聚糖衍生物

壳聚糖是一种新型高分子功能材料,自身具有优良的生物性能。为克服其溶解性较差等缺陷,扩大其应用范围,常采用物理和化学的手段对壳聚糖改性,以改善其物理、化学性能。本文是"壳聚糖改性技术的新进展Ⅰ"的下篇,将继续介绍2000年以来国内外关于壳聚糖物理和化学改性方面的最新研究进展,阐释改性途径以及对改性后所得衍生物的相关表征。主要涉及到壳聚糖的交联化改性、季铵盐化改性、羧基化改性以及制备壳聚糖低聚糖衍生物等途径。     

Reaction kinetics of glycidyl trimethyl ammonium chloride and chitosan in 1-allyl-3-methylimidazolium chloride

The modification of chitosan in ionic liquids through homogeneous reactions has advantages including shorter time and simple post-treatment and the generated chitosan derivatives have high degrees of subsititution and good reproducibility. In this paper, we studied the reaction kinetics of glycidyl trimethyl ammonium chloride and chitosan in 1-allyl-3-methylimidazolium chloride. Chitosan concentration, temperature, and reaction time were studied to determine their influence on reaction kinetics. The results indicated that reaction rate increased with increases of both chitosan concentration and temperature. A first-order kinetics equation was generated, where the relationship between reaction rate constant and temperature was determined.     

O-（4-双胍基苯甲酰基）壳聚糖盐酸盐的制备及其抗菌活性

通过壳聚糖与含双胍基结构的芳酰氯反应,得到具有抗菌活性的双胍基化壳聚糖衍生物。利用对双胍基苯甲酸盐酸盐与氯化亚砜的反应,得到盐酸对双胍基苯甲酰氯后,再在甲烷磺酸-二甲基亚砜（MeSO3H-DMSO）介质中与壳聚糖进行缩合反应,得到了O-（4-双胍基苯甲酰基）壳聚糖盐酸盐（p-BGBC）。用FT-IR、1H-NMR、GP...     

羟丙基三甲基氯化铵壳聚糖的制备及其吸湿、保湿性能

抑菌活性;羟丙基三甲基氯化铵壳聚糖的制备及其吸湿、保湿性能     

海藻酸盐/壳聚糖衍生物复合抗菌纤维

通过溶液纺丝法制备海藻酸盐/羧甲基壳聚糖（CMC）共混纤维,并用红外光谱,X射线衍射和扫描电镜对共混纤维进行了表征.结果表明：共混体系中的两种组分之间存在着较强的相互作用,有良好的相容性.当ωCMC=0.30时,共混纤维的干态抗张强度达到最大值,13.8cN/tex.当ωCMC=0.10时,纤维的干态断裂伸长率可达23.1%.纤维的湿态抗张强度和断裂伸长率随着CMC含量的增加而降低.CMC的引入,可显著提高纤维的吸水率.用壳聚糖季铵盐对纤维进行处理,可赋予纤维抗菌性.     

三苯基锡壳聚糖黄原酸酯的合成、表征及其杀螺活性研究

壳聚糖(chitosan,简称 CTS)是由β(1～4)键合的D-葡糖胺残基和数目不同排列无规的N-乙酰基葡糖胺残基组成的线性多糖,是生物界中大量存在的唯一的一种碱性多糖.     

Properties and adsorptive capacity of amino acids modified chitosans for copper ion removal

This work presents the results of the modification of lateral groups of chitosan (2-amino-2-desoxy-β-D-glucose) by the reaction with different amino acids (glycine, L-lysine, -glutamic acid and L-isoleucine) under acid catalysis. The Cu²⁺ adsorption capacity of pure chitosan and of the chemically modified chitosans were also evaluated. The modification reaction favored the amide formation of the C-2 carbon of the glycoside ring under the adopted reaction conditions: reaction time and temperature and using sulfuric acid as a catalyst. The Cu²⁺ adsorption kinetics and equilibrium response using pure chitosan and the chemically modified chitosans as adsorbents showes that the adsorption capacity of equilibrium depended on the initial ion concentration. The response of each adsorbent gave good correlation with Langmuir's isotherm model. The following maximum adsorption capacity constants were obtained: 172.4 mg/g for chitosan and 69.9, 34.4, and 26.7 mg/g for modified chitosan with glycine, L-glutamic acid, and L-lysine, respectively. The adsorptive capacity seems to be dependent on the length and complexity of the added group.     

Binding cellulose and chitosan via click chemistry: Synthesis,characterization, and formation of some hollow tubes

A novel cellulose‐click‐chitosan polymer was prepared successfully in three steps: (1) propargyl cellulose with degrees of substitution (DS) from 0.25 to 1.24 was synthesized by etherification of bamboo Phyllostachys bambusoide cellulose with propargyl chloride in DMA/LiCl in the presence of NaH. The regioselectivity of propargylation on anhydrous glucose unit determined by GC‐MS was in the order of 2 >> 6 > 3; (2) the functional azide groups were introduced onto the chitosan chains by reacting chitosan with 4‐azidobenzoic acid in [Amim]Cl/DMF and the DS ranged from 0.02 to 0.46; (3) thus, the cellulose‐click‐chitosan polymer was obtained via click reaction, that is, the Cu(I)‐catalyzed Huisgen 1,3‐dipolar cycloaddition reaction, between the terminal alkyne groups of cellulose and the azide groups on the chitosan backbone at room temperature. The successful binding of cellulose and chitosan was confirmed and characterized by FTIR and CP/MAS ¹³C NMR spectroscopy. TGA analyses indicated that the cellulose‐click‐chitosan polymer had a higher thermal stability than that of cellulose and chitosan as well as cellulose–chitosan complex. More interestingly, some hollow tubes with near millimeter length were also observed by SEM. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Chitosan-supported Borohydride Reducing Agent

Borohydride exchange resin (BER) a useful reducing reagent has been used in reduction of some carbonyl compounds and acyl halides1. When BER combines with a transition metal catalyst, it can reduce C=C double bonds2, halides2, nitro compounds3, cyano, diazo3 and azide compounds4. The support of BER is the synthetic macromolecule polystyrene. Here, we used chitosan as the support of borohydride. As known, chitosan is a renewable and abundant natural polysaccharide. Scheme 1 Preparat…     

异相法制备磺酸基取代壳聚糖衍生物

用3-氯-2-羟基丙磺酸钠与壳聚糖在较低温度下进行非均相反应制备了一系列取代度,结构新颖的改性壳聚糖.实验表明化学改性能极大的提高壳聚糖在水溶液中的溶解性能.研究了不同的反应条件对壳聚糖取代度的影响并用核磁共振表征了它们的结构.反应可在中性、较为温和的条件下进行,通过改变反应时间和反应物比例能有效的控制改性壳聚糖的取代度.改性后的壳聚糖能溶解于中性的水溶液中,浊度实验表明产物具有明显的两性聚电解质特征,其等电点约在pH=5.7.该方法为制备化学改性壳聚糖的一种有效的方法.