苯并噻唑和铁氧化物纳米粒子修饰的磁性棒碳糊电极上肼的电催化氧化反应：同时检测肼和苯酚

开发了一种磁性Fe3O4纳米粒子和2-(3,4-二羟苯基)苯并噻唑(DPB)修饰的磁性棒碳糊电极(MBCPE)用于电化学检测肼.首先将DPB自组装在Fe3O4纳米粒子上,然后将此复合物吸附于设计的MBCPE上. MBCPE电极将磁性纳米粒子吸引到电极表面.所得新型电极具有高的导电性和大的有效比表面积,因而对肼的电催化氧化反应有非常大的电流响应.采用伏安法、扫描电镜、电化学阻抗谱、红外光谱和紫外-可见光谱对修饰电极进行了表征.采用伏安法研究了在磷酸盐缓冲溶液(pH=7.0)中MBCPE/Fe3O4NPs/DPB电极上肼的电化学行为.作为电化学传感器, MBCPE/Fe3O4NPs/DPB电极对肼氧化反应表现出极高的电催化活性.在DPB存在下,肼的氧化电势下降,但其催化电流增加.电催化电流与肼浓度在0.1–0.4和0.7–12.0μmol/L二个区间内表现出线性关系,检测限为18.0 nmol/L.另外,研究了MBCPE/Fe3O4NPs/DPB电极同时检测肼和苯酚的性能.伏安实验结果显示,苯酚的线性区域为100–470μmol/L,检测限为24.3μmol/L.采用此电极检测了水样品中的肼和苯酚.     

Fe3O4/Polypyrrole/Au nanocomposites with core/shell/shell structure: synthesis, characterization, and their electrochemical properties

Uniform Fe3O4 nanospheres with a diameter of 100 nm were rapidly prepared using a microwave solvothermal method. Then Fe304/polypyrrole (PPy) composite nanospheres with well-defined core/shell structures were obtained through chemical oxidative polymerization of pyrrole in the presence of Fe3O4; the average thickness of the coating shell was about 25 nm. Furthermore, by means of electrostatic interactions, plentiful gold nanoparticles with a diameter of 15 nm were assembled on the surface of Fe3O4/PPy to get Fe3O4/PPy/Au core/shell/shell structure. The morphology, structure, and composition of the products were characterized by transmission electronic microscopy (TEM), scanning electronic microscopy (SEM), X-ray powder diffraction (XRD), and Fourier transform infrared (FT-IR) spectroscopy. The resultant nanocomposites not only have the magnetism of Fe3O4 nanoparticles that make the nanocomposites easily controlled by an external magnetic field but also have the good conductivity and excellent electrochemical and catalytic properties of PPy and Au nanoparticles. Furthermore, the nanocomposites showed excellent electrocatalytic activities to biospecies such as ascorbic acid (AA).     

Pd/Fe3O4-MCNT磁性催化剂的制备、表征及催化性能

利用多元醇法制备了单分散Fe₃O₄纳米粒子修饰多壁碳纳米管(MCNT)的磁性复合材料, 并以X射线衍射(XRD)、透射电镜(TEM)和X射线能量色散谱(EDS)对碳纳米管磁性复合材料的结构和组成进行了表征. 研究发现, 通过调控Fe₃O₄前驱体与MCNT载体的质量比, 可以很好地控制沉积的磁性纳米粒子大小. 以碳纳米管磁性复合材料为载体, 采用多元醇法成功制备了Pd负载量为3.0% (w)的Pd/Fe₃O₄-MCNT磁性催化剂. 磁性质测试表明碳纳米管磁性复合材料在负载Pd前后都具有良好的超顺磁性. 以肉桂醛加氢为探针反应研究了Pd/Fe₃O₄-MCNT的催化性能, 结果表明该催化剂表现出良好的催化加氢性能, 在外加磁场下催化剂能与液相反应体系高效分离, 循环使用4次后, 催化性能没有明显下降, 显示了良好的循环利用性能.     

表面活性剂碳化法合成Fe3O4/C复合物及其电化学性能

以水热法合成的包覆油酸的α-Fe₂O₃粒子为前驱体, 在氩气下500 °C煅烧1 h, 得到Fe₃O₄/C纳米复合物. 用傅里叶变换红外(FTIR)光谱, X射线衍射(XRD), 扫描电镜(SEM), X射线能量散射(EDX)谱, 高分辨透射电镜(HRTEM), 元素分析, 循环伏安(CV)和恒流充放电测试等方法对材料的结构、形貌、成分及电化学性能进行了表征. 结果表明: 所制备的Fe₃O₄/C复合物呈长约200 nm, 粗约100 nm的纺锤形, 表面碳层厚约1-2 nm, 碳含量为1.956%(质量分数); 这种复合物作为锂离子电池负极材料具有很好的循环稳定性(在0.2C (1C=928 mA·g^-1)循环80次后具有691.7 mAh·g^-1比容量)和倍率性能(在2C循环20次后依然有520 mAh·g^-1比容量). 相对于未包覆的商业Fe₃O₄粒子, 复合物显著提高的电化学性能是由于碳包覆能防止粒子聚集, 提高导电性以及稳定固体电解质界面(SEI)膜.     

磁性Fe_3O_4@PS@PAMAM-Ag复合催化粒子的制备及其可再生催化性能(英文)

采用聚苯乙烯(PS)包裹Fe3O4磁性纳米粒子,制得Fe3O4@PS复合微球,以此作为磁性载体,通过微球表面的羧基将聚酰胺-胺类树形大分子(PAMAM)连接到磁性载体上,然后使Ag纳米粒子镶嵌在树形分子层中,制得可再生的金属复合催化粒子Fe3O4@PS@PAMAM-Ag.并采用红外光谱、扫描电镜、电感耦合等离子体质谱(ICP-MS)和X射线光电子能谱等方法对复合催化粒子进行了表征,结果表明,树形分子可以较好地分散和稳定金属Ag纳米粒子,所制复合催化粒子表面Ag含量为1.64%,具有较高的催化还原对硝基苯酚的活性.同时,利用外加磁场可以方便快捷地从反应体系中分离出来,继续用于下一次反应中,复合催化粒子循环使用6次后,仍保持完全的催化性能.     

Preparation of surface plasmon resonance biosensor based on magnetic core/shell Fe3O4/SiO2 and Fe3O4/Ag/SiO2 nanoparticles

In this paper, surface plasmon resonance biosensors based on magnetic core/shell Fe(3)O(4)/SiO(2) and Fe(3)O(4)/Ag/SiO(2) nanoparticles were developed for immunoassay. With Fe(3)O(4) and Fe(3)O(4)/Ag nanoparticles being used as seeding materials, Fe(3)O(4)/SiO(2) and Fe(3)O(4)/Ag/SiO(2) nanoparticles were formed by hydrolysis of tetraethyl orthosilicate. The aldehyde group functionalized magnetic nanoparticles provide organic functionality for bioconjugation. The products were characterized by scanning electronic microscopy (SEM), transmission electronic microscopy (TEM), FTIR and UV-vis absorption spectrometry. The magnetic nanoparticles possess the unique superparamagnetism property, exceptional optical properties and good compatibilities, and could be used as immobilization matrix for goat anti-rabbit IgG. The magnetic nanoparticles can be easily immobilized on the surface of SPR biosensor chip by a magnetic pillar. The effects of Fe(3)O(4)/SiO(2) and Fe(3)O(4)/Ag/SiO(2) nanoparticles on the sensitivity of SPR biosensors were also investigated. As a result, the SPR biosensors based on Fe(3)O(4)/SiO(2) nanoparticles and Fe(3)O(4)/Ag/SiO(2) nanoparticles exhibit a response for rabbit IgG in the concentration range of 1.25-20.00 μg ml(-1) and 0.30-20.00 μg ml(-1), respectively.     

Synthesis and characterization of multifunctional Fe3O4/poly(fluorescein O-methacrylate) core/shell nanoparticles

Multifunctional fluorescent and superparamagnetic Fe(3)O(4)/poly(fluorescein O-methacrylate) [Fe(3)O(4)/poly(FMA)] nanoparticles with core/shell structure were synthesized via surface-initiated polymerization. First, polymerizable double bonds were introduced onto the surface of Fe(3)O(4) nanoparticles via ligand exchange and a condensation reaction. A fluorescent monomer, FMA, was then polymerized to the double bonds at the surface via free-radical polymerization, leading to form a fluorescent polymer shell around the superparamagnetic Fe(3)O(4) core. The resultant Fe(3)O(4)/poly(FMA) nanoparticles were characterized by Fourier transform infrared, nuclear magnetic resonance, and X-ray diffraction spectroscopy to confirm the reactions. Transmission electron microscopy images showed that the Fe(3)O(4)/poly(FMA) nanoparticles have a spherical and monodisperse core/shell morphology. Photoluminescence spectroscopy and superconducting quantum interference device magnetometer analyses confirmed that the Fe(3)O(4)/poly(FMA) nanoparticles exhibited fluorescent and superparamagnetic properties, respectively. In addition, we demonstrated the potential bioimaging application of the Fe(3)O(4)/poly(FMA) nanoparticles by visualizing the cellular uptake of the nanoparticles into A549 lung cancer cells.     

Fe3O4磁性纳米粒子-氧化石墨烯复合材料的可控制备及结构与性能表征

首先利用高温分解法制备了粒径为18 nm的Fe₃O₄磁性纳米粒子, 并进行羧基化修饰, 然后与聚乙烯亚胺(PEI)化学修饰的氧化石墨烯进行交联反应, 得到磁功能化的氧化石墨烯(MGO)复合材料. 研究了氧化石墨烯片上的磁性纳米粒子的可控负载及其对复合材料磁性能的影响. 利用透射电子显微镜(TEM), 原子力显微镜(AFM), X射线衍射(XRD), 傅里叶变换红外(FT-IR)光谱, 热重分析(TGA), 振荡样品磁强计(VSM)等手段对MGO复合材料的形貌, 结构和磁性能进行了表征. 结果表明, 我们发展的MGO复合材料的制备方法具有简单、可控的优点, 所制备的MGO复合材料具有较高的超顺磁性. 该类磁性氧化石墨烯复合材料有望在磁靶向药物、基因输运、磁共振造影以及磁介导的生物分离和去除环境污染物等领域获得广泛的应用.     

壳核型磁性纳米纤维素微球的超声制备及表征

A kind of cellulose magnetic nanoparticle with a core / shell structure has been prepared by ultrasonic irradiation. Cellulose acts as the shell while Fe3O4 magnetic nanoparticles take the role as the core. Magnetic force microscopy（MFM）with atomic force microscopy（AFM）measurement showed that the size of the magnetic nanoparticles is about 30-50 nm in diameter,while the Fe3O4 core is about 20-30 nm. FT-IR,XRD and MFM was used to provide the chemical and magnetic information of the nanoparticles. The MFM image showed that the nanoparticles separate very well with each other,indicating the cellulose shell produces a good prevention from the aggregation of the Fe3O4 particles. MFM studies also showed two magnetic nanoparticles can form particle-pairs,indicating a weak magneto-dipole interaction between magnetic nanoparticles. It is also found that the average sizes of magnetic nanoparticles have relation to the power of ultrasonic irradiation,and the possible mechanism is discussed.     

Magnetization-induced double-layer capacitance enhancement in active carbon/Fe3O4 nanocomposites

The effects of magnetic fields on electrochemical processes have made a great impact on both theoretical and practical significances in im-proving capacitor performance. In this study, active carbon/Fe...     

Magnetization-induced double-layer capacitance enhancement in active carbon/Fe_3O_4 nanocomposites

The effects of magnetic fields on electrochemical processes have made a great impact on both theoretical and practical significances in improving capacitor performance. In this study, active carbon/Fe3O4-NPs nanocomposites(AC/Fe3O4-NPs) were synthesized using a facile hydrothermal method and ultrasonic technique. Transmission electron micrographs(TEM) showed that Fe3O4nanoparticles(Fe3O4-NPs) grew along the edge of AC. AC/Fe3O4-NPs nanocomposites were further used as an electrochemical electrode, and its electrochemical performance was tested under magnetization and non-magnetization conditions, respectively, in a three-electrode electrochemical device. Micro-magnetic field could improve the electric double-layer capacitance, reduce the charge transfer resistance, and enhance the discharge performance. The capacitance enhancement of magnetized electrode was increased by 33.1% at the current density of 1 A/g, and the energy density was improved to 15.97 Wh/kg, due to the addition of magnetic particles.     

Iron oxide coated gold nanorods: synthesis, characterization, and magnetic manipulation

We report a simple process to generate iron oxide coated gold nanorods. Gold nanorods, synthesized by our three-step seed mediated protocol, were coated with a layer of polymer, poly(sodium 4-styrenesulfonate). The negatively charged polymer on the nanorod surface electrostatically attracted a mixture of aqueous iron(II) and iron(III) ions. Base-mediated coprecipitation of iron salts was used to form uniform coatings of iron oxide nanoparticles onto the surface of gold nanorods. The magnetic properties were studied using a superconducting quantum interference device (SQUID) magnetometer, which indicated superparamagnetic behavior of the composites. These iron oxide coated gold nanorods were studied for macroscopic magnetic manipulation and were found to be weakly magnetic. For comparison, premade iron oxide nanoparticles, attached to gold nanorods by electrostatic interactions, were also studied. Although control over uniform coating of the nanorods was difficult to achieve, magnetic manipulation was improved in the latter case. The products of both synthetic methods were monitored by UV-vis spectroscopy, zeta potential measurements, and transmission electron microscopy. X-ray photoelectron spectroscopy was used to determine the oxidation state of iron in the gold nanorod-iron oxide composites, which is consistent with Fe2O3 rather than Fe3O4. The simple method of iron oxide coating is general and applicable to different nanoparticles, and it enables magnetic field-assisted ordering of assemblies of nanoparticles for different applications.     

Sonochemical formation of iron oxide nanoparticles in ionic liquids for magnetic liquid marble

Ionic liquids (ILs)-stabilized iron oxide (Fe(2)O(3)) nanoparticles were synthesized by the ultrasonic decomposition of iron carbonyl precursors in [EMIm][BF(4)] without any stabilizing or capping agents. The Fe(2)O(3) nanoparticles were isolated and characterized by X-ray powder diffraction, transmission electron microscopy and susceptibility measurements. The physicochemical properties of ILs containing magnetic Fe(2)O(3) nanoparticles (denoted as Fe(2)O(3)@[EMIm][BF(4)]), including surface properties, density, viscosity and stability, were investigated in detail and compared with that of [EMIm][BF(4)]. The Fe(2)O(3)@[EMIm][BF(4)] can be directly used as magnetic ionic liquid marble by coating with hydrophobic and unreactive polytetrafluoroethylene (PTFE), for which the effective surface tension was determined by the puddle height method. The resulting magnetic ionic liquid marble can be transported under external magnetic actuation, without detachment of magnetic particles from the marble surface that is usually observed in water marble.     

金属氧化物(Fe2O3, CuO,NiO)改性对TiO2纳米管阵列光电催化活性的增强效应

采用阳极氧化法和阴极电沉积法制备了Fe2O3,CuO和NiO纳米粒子改性的高度有序的TiO2纳米管(TiO2-NT)阵列.运用场发射扫描电子显微镜(FE-SEM),透射电子显微镜(TEM),X射线衍射(XRD)和紫外-可见漫反射光谱等手段对Fe2O3/TiO2-NT、CuO/TiO2-NT和NiO/TiO2-NT复合电极进行表征.以苯酚为模拟污染物,考察复合电极的光电性能.结果表明,金属氧化物(Fe2O3,CuO,NiO)纳米粒子成功沉积在TiO2-NTs的管口、内壁和管底.金属氧化物改性复合电极的光电催化活性比未改性的TiO2-NTs提高了2倍以上.Fe2O3/TiO2-NTs在可见光区显示出最高的吸收强度.以Fe2O3/TiO2-NTs为阳极处理苯酚废水,光照120min后苯酚去除率达到96%,而未改性的TiO2-NTs的苯酚去除率只有41%.此外,Fe2O3/TiO2-NTs在生成低毒中间产物方面表现出良好的性能.较高的复合电极光电催化活性主要是由于TiO2纳米管和过渡金属氧化物纳米粒子间构筑的高界面面积异质纳米结构,有效地促进了电子转移,抑制了光生电子-空穴对的复合.     

Novel nanocomposite of nano fe(3)o(4) and polylactide nanofibers for application in drug uptake and induction of cell death of leukemia cancer cells

Novel nanocomposites of polylactide (PLA) nanofibers and tetraheptylammonium-capped Fe3O4 magnetic nanoparticles have been prepared and utilized to realize the efficient accumulation of anticancer drug daunorubicin in target cancer cells. The observations of optical microscopy and confocal fluorescence microscopy indicate that the PLA nanofibers and Fe3O4 nanoparticles may contribute to their beneficial effects on intracellular drug uptake of leukemia K562 cell lines in which the efficiently enhanced accumulation of anticancer drug daunorubicin on the membrane of cancer cells could be observed. Meanwhile, the electrochemical detection and the microculture tetrazolium studies were also explored to probe the effect of the relevant nanomaterials on the drug uptake of cancer cells. The results illustrate that the nanocomposites could effectively facilitate the interaction of daunorubicin with leukemia cells and remarkably enhance the permeation and drug uptake of anticancer agents in the cancer cells, which could readily lead to the induction of the cell death of leukemia cells. This observation suggests a new perspective for the targeted therapeutic approaches of cancers.     

Decoration of Electrospun Nanofibers with Magnetic Nanoparticles via Electrospinning and Sol-gel Process

Polyacrylonitrile(PAN)/Fe 3 O 4 composite nanofibers were successfully obtained through electrospinning and sol-gel technology. The resulting magnetic Fe 3 O 4 nanoparticles were homogeneously distributed on the surface of PAN nanofibers and the diameters of polyacrylonitrile nanofibers and nanoparticles were easily controlled, respectively. The distribution of Fe 3 O 4 nanoparticles inside the nanofibrous composite was investigated by field emission scanning electron microscopy and transmission electron microscopy. X-ray diffraction reveals the presence of Fe 3 O 4 nanoparticles in the composite nanofiber. The resulting sample shows a super paramagnetic behavior.     

Fe_3O_4/CdTe/聚氨酯纳米复合物的制备及其性能研究

由共沉淀法和Stober法制备了伯胺基功能化SiO2稳定的Fe3O4磁性纳米粒子Fe3O4@SiO2-NH2;Fe3O4@SiO2-NH2与二异氰酸酯及咪唑阳离子二醇、聚乙二醇的反应使其表面形成阳离子型聚氨酯稳定层;通过阳离子型聚氨酯与CdTe量子点表面修饰的巯基乙酸间的电荷相互作用,制备得到了Fe3O4/CdTe/聚氨酯纳米复合物.用X射线衍射(XRD)、红外吸收光谱(FTIR)、热重分析(TGA)、透射电子显微镜(TEM)、磁强计(VSM)、紫外吸收光谱(UV)、荧光发射光谱(PL)表征了该纳米复合物的结构与性能.结果表明,CdTe量子点均匀地分散在Fe3O4@SiO2磁性纳米粒子周围,所得纳米复合物在溶剂中分散均匀,不团聚,且具有超顺磁性,并保持了CdTe量子点的荧光性能.     

磁性聚苯胺纳米微球的合成与表征

报道了具有核壳结构的Fe3O4-聚苯胺磁性纳米微球的合成方法和表征结果.微球同时具有导电性和磁性能.在优化的实验条件下,可得到饱和磁化强度Ms为55.4 emu/g,矫顽力Hc为62 Oe的磁性微球.微球的导电性随着微球中Fe含量的增加而下降.微球的磁性能则随着Fe含量的增加而增大.Fe3O4磁流体的粒径和磁性聚苯胺微球的粒径均在纳米量级.纳米Fe3O4粒子能够提高复合物的热性能.实验表明,磁流体和聚苯胺之间可能存在着一定的相互作用,但这种相互作用较为复杂,难于研究     

Electrochemical biosensors utilising electron transfer in heme proteins immobilised on Fe3O4 nanoparticles

Fe3O4 nanoparticles cast on pyrolytic graphite (PG) electrodes were used to immobilize hemoglobin (Hb), myoglobin (Mb) and horseradish peroxidase (HRP). The Fe3O4 nanoparticles provided a favorable microenvironment for the proteins to directly transfer electrons with electrodes. The protein-Fe3O4 films were used to electrochemically catalyze the reduction of oxygen, trichloroacetic acid, nitrite and hydrogen peroxide, and showed a potential applicability in fabricating biosensors. Transmission electron microscopy (TEM), UV-visible absorption and reflectance absorption infrared (RAIR) spectroscopy, and cyclic and square wave voltammetry, were used to characterize the films.     

Photoluminescent Fe3O4/carbon nanocomposite with magnetic property

Fe(3)O(4)/carbon nanocomposite has been prepared by a facile chemical method, and characterized by X-ray diffraction, X-ray photoelectron spectroscopy, transmission electron microscopy, fourier transform infrared spectroscopy and scanning electron microscopy. The fluorescent and magnetic properties of the sample were investigated by fluorescence spectroscopy and vibrating-sample magnetometer, respectively. The results indicate that the Fe(3)O(4)/carbon nanocomposite exhibit good photoluminescent (emission ranging from 425 to 550 nm) and strong magnetic (saturation magnetization of 44.2 emu/g) properties.