Gas chromatography for in situ analysis of a cometary nucleus III. Multi-capillary column system for the cometary sampling and composition experiment of the Rosetta lander probe

The cometary sampling and composition (COSAC) experiment is one of the principal experiments of the surface lander probe of the European Space Agency Rosetta mission to be launched in January 2003. The instrument is designed for the in situ chemical analysis of a cometary nucleus as the details of the nucleus composition are of primary importance for understanding both the formation of the solar system, and the origin of life on Earth. The COSAC experiment consists of an evaporation/pyrolysis device and two analytical systems: a multi-column gas chromatograph and a high-resolution time-of-flight mass spectrometer which may either be operated alone or in a coupled mode. The gas chromatograph includes five general purpose chromatographic columns and three chiral ones, all mounted in parallel. Taking into account the chemical species potentially present in the cometary nucleus as well as the space constraints, a set of five complementary columns was selected to perform the separation and identification of the compounds present in the cometary nucleus. This set of columns includes a carbon molecular sieve porous-layer open tubular (PLOT) column used for the separation of both the noble and other permanent gases, and the C1-C2 hydrocarbons. A second PLOT column uses a divinylbenzene-ethylene glycol-dimethylacrylate porous polymer as stationary phase for the analysis of a wide range of C1-C2 organic molecules, Two complementary wall-coated open tubular (WCOT) columns with polydimethylsiloxane (PDMS) liquid stationary phases, one containing cyanopropyl-phenylsiloxane and the other diphenylsiloxane groups, are designed to target the same range of organic compounds (C3-C7) which could be representative of the widest range of cometary compounds. A third WCOT column with an apolar stationary phase made of non-substituted PDMS is used for the separation and identification of higher-molecular-mass compounds (up to C10) and aromatic species (monoaromatic and polyaromatic). This paper describes these five general-purpose capillary PLOT and WCOT columns, selected to be used in the COSAC GC system. The analytical capabilities are examined with a special emphasis on the exobiological and planetological implications.     

In-situ chemical investigation of a comet nucleus by gas chromatography: Porous layer open tubular columns for the separation of light, volatile compounds

Summary In the framework of the cometary sampling and composition (COSAC) experiment of the European Space Agency (ESA) Rosetta space mission to a comet, a new generation of porous polymer porous-layer open tubular (PLOT) columns has been investigated with the aim of separating the light organic compounds targeted by the experiment within the constraints of the operating conditions used in space. Both styrene-divinylbenzene and ethylene glycol-dimethyl acrylate-divinylbenzene porous polymers can be used to separate most of the target compounds, but the latter was selected because of its better separating properties. The most appropriate column characteristics were found to be 10 m length, 0.18 mm internal diameter, and 1–2 μm layer thickness, despite the low sample-loading capacity of such a column, which impairs its chromatographic performance. The influence of column overloading on retention properties and efficiency was, therefore, studied. To achieve the separation with optimum sensitivity, and within the in-situ time allowed for the analysis, it was also demonstrated that the maximum allowed temperature and reduced outlet pressure are required. Finally, it was shown that in the presence of water, the most abundant volatile compound in comets the separating properties of the studied columns are conserved. This paper thus demonstrates the suitability of the porous polymer PLOT column selected for the COSAC experiment and requirements for use in space; it is the first porous polymer PLOT column to be used in space exploration. Presented at: 23^rd International Symposium on Chromatography, London, UK, October 1–5, 2000     

Gas chromatography for in situ analysis of a cometary nucleus. II. Analysis of permanent gases and light hydrocarbons with a carbon molecular sieve porous layer open tubular column

Considering the severe constraints of space instrumentation, a great improvement for the in situ gas chromatographic (GC) determination of permanent and noble gases in a cometary nucleus is the use of a new carbon molecular sieve porous layer open tubular (PLOT) column called Carbobond. No exhaustive data dealing with this column being available, studies were carried out to entirely characterize its analytical performances, especially when used under the operating conditions of the cometary sampling and composition (COSAC) experiment of the European Space Agency (ESA) Rosetta space mission to be launched in 2003 for a rendezvous with comet 46 P/Wirtanen in 2011. The high efficiency and speed of analysis of this column at both atmospheric and vacuum outlet column pressure is demonstrated, and the kinetic mass transfer contribution of this carbon molecular sieve adsorbent is calculated. Besides, differential adsorption enthalpies of several gases and light hydrocarbons were determined from the variation of retention volume with temperature. The data indicate close adsorption behaviors on the Carbobond porous layer adsorbent and on the carbon molecular sieve Carboxen support used to prepare the packed columns. Moreover, taking into account the in situ operating conditions of the experiment, a study of two columns with different porous layer thicknesses allowed one to optimize the separation of the target components and to select the column parameters compatible with the instrument constraints. Comparison with columns of similar selectivity shows that these capillary columns are the first ones able to perform the same work as the packed and micro-packed columns dedicated to the separation of this range of compounds in GC space exploration.     

Evaluation of the separation characteristics of application-specific (volatile organic compounds) open-tubular columns for gas chromatography

The solvation parameter model is used to characterize the separation characteristics of two application-specific open-tubular columns (Rtx-Volatiles and Rtx-VGC) and a general purpose column for the separation of volatile organic compounds (DB-WAXetr) at five equally spaced temperatures over the range 60-140 degrees C. System constant differences and retention factor correlation plots are then used to determine selectivity differences between the above columns and their closest neighbors in a large database of system constants and retention factors for forty-four open-tubular columns. The Rtx-Volatiles column is shown to have separation characteristics predicted for a poly(dimethyldiphenylsiloxane) stationary phase containing about 16% diphenylsiloxane monomer. The Rtx-VGC column has separation properties similar to the poly(cyanopropylphenyldimethylsiloxane) stationary phase containing 14% cyanopropylphenylsiloxane monomer DB-1701 for non-polar and dipolar/polarizable compounds but significantly different characteristics for the separation of hydrogen-bond acids. For all practical purposes the DB-WAXetr column is shown to be selectivity equivalent to poly(ethylene glycol) columns prepared using different chemistries for bonding and immobilizing the stationary phase. Principal component analysis and cluster analysis are then used to classify the system constants for the above columns and a sub-database of eleven open-tubular columns (DB-1, HP-5, DB-VRX, Rtx-20, DB-35, Rtx-50, Rtx-65, DB-1301, DB-1701, DB-200, and DB-624) commonly used for the separation of volatile organic compounds. A rationale basis for column selection based on differences in intermolecular interactions is presented as an aid to method development for the separation of volatile organic compounds.     

Design and evaluation of a mixed-phase capillary column for the gas chromatographic separation of the volatile components of cheese

Summary A mixed-phase capillary GC column has been designed for the separation of the compounds commonly present in the volatile fraction of cheeses. The design includes the calculation of the optimum phase concentration and the operating conditions. The evaluation of the resulting column indicates that its performance in the qualitative and quantitative analysis of cheese volatile compounds is better than those of other columns coated with a single stationary phase.     

Gas chromatography for in situ analysis of a cometary nucleus: characterization and optimization of diphenyl/dimethylpolysiloxane stationary phases

The development of a gas chromatograph for the cometary sampling and composition (COSAC) experiment is described in the context of the preparation for the European Space Agency (ESA) Mission Rosetta for investigation of a cometary nucleus. COSAC is one out of ten experiments on the Rosetta Lander. Its scientific goal is to analyze in situ the chemical composition of the volatile constituents of the nucleus of the target comet P/Wirtanen. Constituted of several (up to eight) capillary wall-coated and porous-layer open tubular columns operating in parallel, the GC system is designed to separate and identify both organic and inorganic compounds which evolve from the comet naturally or are obtained from cometary samples through stepwise heating in a miniaturized pyrolizer. In this first part of our study, dimethylpolysiloxane (DMPS) stationary phases with increasing percentages of diphenyl substituted group (DP) have been investigated. A coupled experimental and theoretical approach has been taken in order to predict chromatographic data. By the use of a four-point experimental calibration (0 to 65% diphenyl group) in conjunction with Pro ezGC modeling software, results in prediction of multicomponent chromatograms with a mean error less than 5% for each compound retention time were obtained, irrespective of the stationary phase's diphenyl content and column physical parameters. The possibility to associate such phases is illustrated by the evolution of coelutions obtained on a non-polar (100% DMPS) and a medium polar (65% DP-DMPS) stationary phase, respectively. This study showed that with a small number of well tuned DP-DMPS columns, the separation and identification of most of the targeted compounds can be achieved with a minimum amount of coelutions and within the experiment requirements.     

Simultaneous use of fluorescence,ultraviolet, and electrochemical detectors in high performance liquid chromatography-separation and identification of phenolic antioxidants and related compounds

Isocratic conditions are described for the separation, identification and quantitation of selected phenolic antioxidants and related compounds by high performance liquid chromatography on a reverse phase microparticulate ODS column. Mobile phases containing 0.05 M lithium perchlorate in aqueous methanol are used. Three detection systems: ultraviolet; fluorescence; and electrochemical detectors are connected in tandem. The use of these three detection systems in sequence as additional means for separation, identification, and quantitation is demonstrated. Other advantages of the system include speed of analyses and improved detection. The ? values and detector responses at 2 settings per detector for 12 compounds are reported.     

Separation of positional isomers by the use of coupled shape-selective stationary phase columns

The successful separation of 2- and 3-methyl-substituted positional isomers of butanol, butyl acetate, and butanoic acid and its ethyl ester, is reported. These compounds are of interest in the study of wine flavour, however the separation of the 2- and 3-methyl isomers may present problems, and more so in the presence of the wine matrix components, when single capillary column gas chromatography (GC) is used. The strategy to achieve separation was based on the use of shape-selective cyclodextrin derivative (CDD) capillary columns (commonly referred to as chiral columns). These columns provide simultaneous resolution of the enantiomeric pairs of the 2-methyl isomers, and at the same time the ability to separate the 3-methyl isomer from the 2-methyl is achieved in all but the case of the ( S)-2- and 3-methylbutanol. The advantages of using shape-selective columns to perform this study is demonstrated, with coupling of two CDD columns giving improved separations of these compounds. Although these compounds are relatively volatile, cryogenic modulated comprehensive two-dimensional GC was shown to provide good pulsed peak profiles with chiral separation in the first dimension when a thicker film trapping column segment was employed. The components of interest were well separated from other wine matrix components.     

Fast method development of rooibos tea phenolics using a variable column length strategy

The development of a method for the separation of standard compounds of the 15 main phenolics found in rooibos tea is presented. The separation of these compounds in a single HPLC analysis is particularly challenging due to the similarity of rooibos phenolics. As a result, multiple methods are often required to analyze all major phenolics in rooibos tea samples. The method development process is significantly enhanced in this study by using the recently introduced automated column coupler in combination with the variable column length strategy. This strategy consists of performing the initial scouting runs, wherein the best separation conditions are determined, on a short column and subsequently fine-tuning the separation on longer columns to benefit from their higher separation performance. It is demonstrated that the method development process can further be expedited by operating each column length at the maximum pressure, in this case 1000 bar. Although this holds in general, it is even more the case for the presently considered sample, since the selectivity of the sample is more pressure- than temperature-dependent. Applying the optimized method to unfermented and fermented aqueous rooibos tea extracts in combination with Q-TOF mass spectrometry, some 30 phenolic compounds are tentatively identified.     

Gas–Adsorption Chromatography of Reactive Compounds on Open-Tubular Columns with Poly(trimethylsilylpropyne)

The possibility of using a new poly(trimethylsilylpropyne) adsorbent for the separation of volatile inorganic hydrides and chlorinated organic compounds in capillary gas chromatography has been studied. Excellent separation properties of columns with the proposed adsorbent have been demonstrated.     

Comparison of two-stage retention index monitoring capillary gas chromatography and selected ion monitoring capillary gas chromatography – mass spectrometry as analytical tools

Two-stage capillary GC with two-stage retention index monitoring is an efficient analytical technique which can be used for detection and determination of small amounts of volatile compounds in complex mixtures of hundreds or thousands of other compounds. The system employs two capillary columns, coated with different stationary phases, connected on-line with the aid of a micro valve; the first column acts as a pre-separating unit from which unresolved fractions of interest are cut (transferred) into another column for final, interference-free separation of the compounds to be determined. This technique has been compared with selected ion monitoring capillary GC-MS using a hydrocarbon mixture as a test sample for comparing resolution, repeatability, and the practical usefulness of the techniques. Results indicate that two-stage capillary GC is very useful for mixtures containing compounds which produce mostly non-specific ions in the MS ion source whereas compounds producing specific ions can be easily analyzed by capillary GC – single ion monitoring MS even if they are not perfectly separated by a single capillary column.     

Gas chromatography for in situ analysis of a cometary nucleus. IV. Study of capillary column robustness for space application

As part of the development of the European Space Agency Rosetta space mission to investigate a cometary nucleus, the selection of columns dedicated to the gas chromatographic subsystem of the Cometary Sampling and Composition (COSAC) experiment was achieved. Once the space probe launched, these columns will be exposed to the harsh environmental constraints of space missions: vibrations, radiation (by photons or energetic particles), space vacuum, and large temperature range. In order to test the resistance of the flight columns and their stationary phases, the columns were exposed to these rough conditions reproduced in the laboratory. The comparison of the analytical performances of the columns, evaluated prior and after the environmental tests, demonstrated that all the columns withstand space constraints, and that their analytical properties were preserved. Therefore, all the selected capillary columns, even having porous layer or chiral stationary phases, were qualified for space exploration.     

Application of a flow-tunable, serially coupled gas chromatographic capillary column system for the analysis of complex mixtures

Summary A capillary column gas chromatographic system employing two serially coupled fused-silica columns and a simple coupling element is described. The system is operated in flow-tunable mode (flow-tunable tandem system). The very fact of continuous tuning over a large polarity (selectivity) range, ultimately determined by the two constituent columns, offers several possibilities in the analysis of complex mixtures. In this paper two applications are discussed in detail: optimization of peak separation and peak identification. For these applications it is feasible to use, retention data collected from experiments on the tandem system, and empirical formulas. A relatively simple theoretical mathematical model valid for the flow-tunable tandem system, however, furnishes an easy way of calculating retention data on the system from data collected from the individual single columns, thus, creating a new possibility for optimization and peak identification. Optimization and peak identification processes using the empirical and theoretical models are both demonstrated by analysis of solvent mixtures. Dedicated to the memory of Dr. Tibor Tóth Presented at Balaton Symposium on High-Performance Separation Methods, Siófok, Hungary, September 1–3, 1999     

Evaluation of chromatographic columns packed with semi‐ and fully porous particles for benzimidazoles separation

The behavior of 15 benzimidazoles, including their main metabolites, using several C₁₈ columns with standard or narrow‐bore diameters and different particle size and type were evaluated. These commercial columns were selected because their differences could affect separation of benzimidazoles, and so they can be used as alternative columns. A simple screening method for the analysis of benzimidazole residues and their main metabolites was developed. First, the separation of benzimidazoles was optimized using a Kinetex C₁₈ column; later, analytical performances of other columns using the above optimized conditions were compared and then individually re‐optimized. Critical pairs resolution, analysis run time, column type and characteristics, and selectivity were considered for chromatographic columns comparison. Kinetex XB was selected because it provides the shortest analysis time and the best resolution of critical pairs. Using this column, the separation conditions were re‐optimized using a factorial design. Separations obtained with the different columns tested can be applied to the analysis of specific benzimidazoles residues or other applications.     

High-Throughput Screening of Drugs of Abuse in Urine by Supported Liquid–Liquid Extraction and UHPLC Coupled to Tandem MS

A qualitative method, involving supported liquid–liquid extraction (SLE) and ultra high pressure liquid chromatography coupled to tandem mass spectrometry (UHPLC-MS–MS), was developed for the rapid tentative identification of various drugs of abuse in urine. In this study, 28 drugs and metabolites were covered by the screening procedure. Before analysis, urine samples were extracted by SLE and good extraction recoveries were obtained for most investigated compounds. The UHPLC strategy was then selected for the rapid separation of amphetamines, cocaine, opiates and related compounds in urine. Using columns packed with sub-2 µm particles, analysis time was reduced down to 2 min, while maintaining acceptable performance. Finally, the detection was by tandem MS operating in the single reaction monitoring (SRM) mode. The most intense transition was selected for the different drugs and SRM dwell times set at 5 ms, to maintain sufficient data points across the narrow UHPLC peaks. The tentative identification of the drugs of interest, including amphetamines, opiates and cocaine, was based on both, retention times and mass spectrometry information. With the proposed method, limits of detection were estimated at about 1 ng mL^?1 and the applicability was assessed by successfully analyzing several samples of drug abusers. Finally, this study demonstrates the potential of UHPLC coupled to tandem MS for the rapid screening of drugs of abuse in urine.     

Modifications of poly(methyl-3-propylthiol)siloxane to give stationary phases for open tubular supercritical fluid chromatography

Summary Poly(methyl-3-propylthiol)siloxane has been evaluated for use as stationary phase in open tubular columns for gas and supercritical fluid chromatography. Immobilization of the stationary phase was achieved by crosslinking with 2,4,6-trichloro-1,3,5-triazine. The poly(methyl-3-propylthiol)siloxane stationary phase film was in situ oxidized to the disulphide and sulphonic acid forms and both have been evaluated for use in supercritical fluid chromatography. Good selectivity towards polar polycyclic aromatic compounds has been shown. All the modified forms of the stationary phase were loaded with silver ions and were evaluated with regard to ligand exchange chromatography using supercritical fluid carbon dioxide as a mobile phase. The utility of the stationary phase, having sulphonic acid groups loaded with silver ions, has been demonstrated by separation of fatty acid methyl esters according to their unsaturation.Dedicated to Professor Leslie S. Ettre on the occasion of his 70th birthday.     

A novel method for terpene pattern determination of essential oils by selectivity tuning in GC

Summary Selectivity tuning is used in a system of series-coupled GC-columns of different polarity in order to improve the analysis of complex samples of essential oils. It is shown that selectivity tuning by changing the flow-rates in the single columns can be used for improving both the resolution and the reliability of identification. Furthermore, by combining this method with column switching techniques (multidimensional GC) a reduction of sample complexity could be reached. Isothermal retention indices of 35 terpenoid compounds were ascertained using a non-polar and a polar capillary column serving as the input-values of a computer program which enables the prediction of system retention times at any adjusted flow-rate. Therefore, promising chromatographic conditions for the separation of interesting compounds could be selected without great experimental effort and some of these compounds could be identified with a high degree of reliability.     

Glass capillary gas chromatography of chlorinated methyl acetates,propanoates and butanoates on Carbowax 20M and SE-30 columns

Summary The gas chromatography of all chlorinated methyl acetates, methyl propanoates and methyl mono- and dichlorobutanoates has been studied on Carbowax 20M and SE-30 glass capillary columns under various running conditions. The order of elution on a non-polar column was largely determined by the boiling point of esters, whereas on a polar column it was much influenced by the structure of compounds. Complete separation of the combined mixture of all 27 compounds could not be achieved, however, methyl 3,3-dichlorobutanoate was the only ester overlapped on both columns in spite of the various column temperatures used. The best separation of the mixture was on Carbowax 20M with a temperature program from 50°C at 8°C/min, isothermal running conditions leading either to poor separation of volatile components or long analysis time and broad peaks of higher chlorinated esters. The relative retention times for compounds at the various column temperatures are given and the retention order on a polar and on a non-polar column discussed.     

Development of a Parallel-Tandem Column Interface in a Two-Dimensional Liquid Chromatography System

An ion exchange-reversed-phase two-dimensional liquid chromatography (2D-LC) system was developed based on a newly designed interface. The interface was constructed by alternately connecting tandem columns to one of the parallel separation columns to increase the separation efficiency. Separation on the tandem column does not affect the switching frequency; the valve switching could be maintained at high frequency. The constructed interface could be used in both ambient and elevated temperature modes. Under high-temperature mode, only the tandem column was heated, which simplified the operation, decreased the backpressure, improved the solvent compatibility, and speeded up the separation. Tryptic digestion of four proteins was used to evaluate the performance of the developed system. The peak capacity of the 2D-LC system reached 650 under ambient conditions and 890 under high temperature conditions. When compared with the traditional parallel column interface constructed in this paper, the new interface produced a 60% higher peak capacity.